Von Duprin 373L L BE Control For 8827K K F 88 Mortise 44 Installation Instructions 373 L, 107732

User Manual: Von Duprin 373-L, 373-L-BE control for 8827K K-F 88 Mortise 44 Mortise Installation Instructions Installation Instructions

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadVon Duprin 373L L-BE Control For 8827K K-F 88 Mortise 44 Installation Instructions 373-L, 373-L-BE 107732
Open PDF In BrowserView PDF
*941108-00*

373-L, 373-L-BE

941108-00
Control for 44/88 Mortise and 8827 Device on Metal or Wood Door

INSTALLATION INSTRUCTIONS
1. Prepare door for exit device. See exit device
instructions for locations of holes, backset (line
X-X), and center lines.
2. Prepare door for control:
a. Transfer line X-X from inside (exit device
side) of door to outside (control side) of door.
Use extra care if edge of door is beveled. Be
sure line X-X is parallel to edge of door.
LL Note: See back side of sheet for hole
preparation for metal or wood.
b. Locate and prepare holes as indicated.
3. Install cylinder into control if required (Figures
1 & 2). Insure cylinder cam is set for required
function and replace if necessary.
4. Mortise lock or exit device must be in unlocked
position before installation.
5. Install control and exit device to door.
6. Test key, control, and device action.

Installation Instructions
NL

TL

Hexagon mounting
extension

Socket set
screw
Mortise
cylinder

Cylinder cam in
this position with
key removed

Cylinder
nut
Cylinder locating
washer

TL Function - Control remains unlocked
when key is removed.
NL Function - Control relocks when key is
removed. Requires use of key to operate.
For NL function replace TL cylinder plate
(std. on all controls) with NL cylinder plate
(included in polybag) replacing screw and
washer.

1-1/2”
max.

Spindle must be cut
for 1-3/4” door

Note: Control must be in locked position
when installing cylinder plate.

Figure 1

Figure 2

#10 WDA plate
for wood door
application

X

Line X-X corresponds to line X-X on exit device instructions

X

X

Line X-X corresponds to line X-X on exit device instructions
5/16” dia.
c’sink 1/2” dia x 82 degree
2 places

LHR shown
RHR opposite

1/2” dia.
2 places

Omit cylinder
for BE function

Omit cylinder
for BE function

5/16” dia.
c’sink 1/2” dia x 82 degree
2 places

11/16” R, 2 places
(omit for BE)

3/4”

11/16” R, 2 places
(omit for BE)

1/4”

1-5/8” diameter
(omit for BE)

6-1/2”
6-1/2”

to
CL Corresponds
center line of exit

3”

device on exit
device instructions

3”

“A”
“A”
2”

2”

1-3/8” dia.
(BE only)

1-3/8” diameter
(BE only)
Inside
face of
lock stile

Outside
face of
lock stile

X

Metal Door Application

X

X
For cutouts on inside face
of door see instructions in
device carton.

Customer Service
1-877-671-7011

www.allegion.com/us

Outside
face of
lock stile

1/2” dia.
1-3/8”deep
2 places

Wood Door Application

Device Application Schedule
Device
Dimension “A”
8827-K, 8827-K-F
3-1/2”
88 Mortise
3-1/4”
44 Mortise
3-3/16”

© Allegion 2014
Printed in U.S.A.
941108-00 Rev. 01/14-c
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.5-c021 79.153613, 2013/07/11-05:21:54
Format                          : application/pdf
Subject                         : 
Description                     : 300 series;exit device trims;88 series
Modified                        : 2016:01:04 18:13:52Z
Title                           : Von Duprin 373L L-BE Control for 8827K K-F 88 Mortise 44 Mortise Installation Instructions
Size                            : 297151
Sha 1                           : 220e960924879016f54e146ded104b02ca8fe7e5
Extracted                       : 2016:12:06 22:31:24Z
Modify Date                     : 2013:12:10 15:06:41Z
Create Date                     : 2013:12:10 15:06:40Z
Metadata Date                   : 2013:12:10 15:06:41Z
Creator Tool                    : Adobe InDesign CS6 (Windows)
Rendition Class                 : proof:pdf
Document ID                     : xmp.id:6369846EAC61E311B924EC395DFD5C11
Original Document ID            : xmp.did:516915126ECCE1118A0D8AD340C27D6B
Instance ID                     : uuid:84bd62e8-c832-42f8-8aec-8ecceba1fcaf
Derived From Rendition Class    : default
Derived From Instance ID        : xmp.iid:69738509CB5DE3118847E8FC14163402
Derived From Document ID        : xmp.did:4522DFEB1A53E311ABFC929FB3035821
Derived From Original Document ID: xmp.did:516915126ECCE1118A0D8AD340C27D6B
History Action                  : converted
History Software Agent          : Adobe InDesign CS6 (Windows)
History Parameters              : from application/x-indesign to application/pdf
History When                    : 2013:12:10 15:06:40.000Z
History Changed                 : /
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS6 (Windows)
Keywords                        : 300, series;exit, device, trims;88, series
EXIF Metadata provided by EXIF.tools

Navigation menu