Von Duprin 88 Series Catalog 105966
User Manual: Von Duprin Von Duprin 88 Series Catalog Catalog
Open the PDF directly: View PDF 
.
Page Count: 34
| Download | |
| Open PDF In Browser | View PDF |
88 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of a door opening or access system and will provide safe and reliable service when properly applied and maintained. It is the policy of Von Duprin, to design and manufacture exit devices to a high standard of quality and reliability in accordance with the accepted U.S. Domestic and international standers. All 88 Series exit devices are UL listed for Accident Hazard and Fire Exit Hardware, and are tested in accordance to ANSI A156.3, 2008, Grade I. Unusual operating conditions and environments and other external influences can affect the proper application of the products represented. Modifications of these products will also affect UL listings. It is recommended that whenever an unusual application condition exists, or when any modification of a product is considered, our engineers review the application. Application engineering services are available to help ensure proper selection or to review any areas where users of Von Duprin products may have questions. It is intended that the information included in this publication, when properly used, will provide clear and reliable guidelines to the proper general selection and application. However, the scope of the information is necessarily limited. VON DUPRIN Administrative Offices 2720 Tobey Dr. Indianapolis, IN 46219 2 • Von Duprin 88 Series Customer Service 877-671-7011 800-999-0328 - Fax Technical Support 877-671-7011 Table of contents Exit hardware Rim devices 88 Rim 8 88 Rim Fire 10 Mortise lock exit devices 8875 12 8875 Fire 14 Surface mounted vertical rod exit devices 8827 16 8827 Rim Fire 18 Concealed mounted vertical rod exit devices 8847 Fire 20 Trim options 22 Strike options 24 Electrical options 26 Accessories 27 UL Listing 29 Finishes 31 Von Duprin 88 Series • 3 Options and accessories Applications & trim operation Double door applications Door handing Outside trim operation Lever styles Trim options Strike options/ Stile information Electrical accessories E8875 E373l-BE Device accessories Axle security pin Cover plates Cylinders Optional levers Power supplies Vertical rod and latch guard Additional information ANSI grade, type & function Function conversion kit UL listed - fire exit hardware label opening Finishes Standard & special finishes Strike application/minimum stile strikes for rim devices Symbols Indicates fire rated application indicates ADA products C o n t i n u i n g c o m m i t m e n t t o q u a l i t y. 4 • Von Duprin 88 Series How to order E 88 75 TP BE F E Electric unlocking PL Pullman latch (8827 Devices non-fire rated only) 88 88 Series None 27 47 75 DT EO K L NL TL TP Rim device Surface mounted vertical rod device Concealed vertical rod device Mortise lock device Dummy trim Exit only Knob Lever Night latch Turn lever Thumbpiece BE Blank escutcheon F Fire exit device Rim and mortise lock devices, specify: Vertical rod devices, specify: 1. Exit device model number with trim selection. Examples: 88EO (Exit only with no outside trim). 88TP (Includes standard 880TP thumbpiece trim). 88TP x 608TP (Includes the optional 608TP thumbpiece trim). 1. E xit device number with trim selection. Examples: 8827EO (Exit only, no outside trim). 8827TP (Includes 880TP thumbpiece trim). 8827TP x 608 TP (Includes the optional 608TP thumbpiece trim). 2. Door width if greater than 4' (1219 mm). 2. Door width of greater than 4' (1219 mm). 3. Door thickness if other than 1 3/4" (44 mm). 3. Door thickness if other than 1 3/4" (44 mm). 4. Door and frame material if other than hollow metal. 4. Door and frame material if other than hollow metal. 5. Finish 5. D oor height if greater than 7' (2134 mm), extension rods must be ordered. (One piece top rod available) 6. H anding required on “L” function, “F” fire devices. Specify LHR or RHR. See diagram below. 7. “SNB” when using sex nuts and bolts. 6. F inish 7. Handing, LHR or RHR, required on “L” function. Specify LHR or RHR. See diagram below. 8. “SNB” when using sex nuts and bolts.. Pullman latches are optional for 8827 devices. Latchbolts remain extended at all times. Specify “Pullman Latch” when required. (Normally used with an electric strike and less bottom rod) Von Duprin 88 Series • 5 Popular double door applications Double door applications Mortise lock and vertical rod device combination — same direction Two rim devices with mullion — same direction Door handing Left Hand-Reverse Orientation Left hand Two vertical rods — double egress Two vertical rod devices — same direction (do not use with overlapping astragal) Right Hand-Reverse Orientation Right hand reverse orientation reverse orientation LHR RHR LHR (Left hand reverse) RHR (Right hand reverse) (Left hand reverse) (Right hand reverse) Outside Outside Outside trim operation Cylinder options Trim operation lever Standard operation NL Function Blank escutcheon Mortise – 3215 (Schlage B502-191 cams) Key locks and unlocks lever. Lever will be locked when key is removed. Lever always active. BE suffix, E.G., 371L-BE. Rim – 3216 Key retracts latch bolt, knob is rigid. K-NL function trim is locked when key is removed. Available with 88 Rim only. To order trim, specify 880K-NL-R. 6 • Von Duprin 88 Series Lever styles Standard levers 01 02 Knurling available 03* Knurling available 07 12 (Handed) 17* Knurling available 06* Default lever Knurling available Von Duprin 88 Series • 7 88 Rim exit device The 299 Strike ships standard, optional strikes available 88 rim devices for all types of single and double doors with mullion, UL listed for accident hazard installations. Covers stock hollow metal doors with 86 or 161* cutouts. This device is field reversible. Finishes – US26, US26D, US3, US4, US10B, US10, SPBLK Hex key dogging comes standard on 88 Rim exit devices 88 Rim exit device Specifications Device functions Handing Crossbar length Device centerline Crossbar centerline to finished floor Lock stile case Hinge stile case Crossbar tubing Projection Device ships EO, DT, NL, TP, L, K Field reversible 42" (1067 mm) field sizeable 39 13/16" 36 13/16" (935 mm) at center 8 1/4" X 2 3/4" x 15/16" (210 mm x 70 mm x 24 mm) 6" X 1 3/4" x 15/16" (152 mm x 44 mm x 24 mm) 1" (25 mm) outside diameter Latch bolt Neutral – 4 3/4" (121 mm) Depressed – 4" (102 mm) 3 /4" (19 mm), throw Fasteners All necessary mounting fasteners are included. Electrical options RX Crossbar monitor switch in end case E Electric unlocking (BE trim only) RCB Reinforced crossbar KN Knurled crossbar 299 - Dull black Mechanical options Strikes * Not applicable with all strike and mullion combinations, consult factory. 8 • Von Duprin 88 Series RX Crossbar monitor switch • Signals use of an opening • SPDT switch to monitor crossbar Standard trims EO NL TP DT K L Exit only Night latch Key retracts latchbolt Key locks thumbpiece Dummy trim Pull when dogged Key locks knob Key locks lever #06 Standard Product description 88EO 88NL 88TP 88DT 88K1,2,3 88L1,2,4,5,6,7 Trim description — 880NL-R Escutcheon plate size — 3" x 14 /16" x /32" 3" x 14 /16" x /32" 3" x 14 /16" x /32" 3" x 14 /16" x /32" 3" x 14 3/16" x 3/32" Grip mounting center — 5/" 5/" 5/" — 6/" Projection — 2" 2" 2" 2 3/4" 2 5/8" 3 1 880TP-R 3 2 3 1 880DT-R 3 1 2 880K-R 3 3 2 3 373L 3 1 4 ANSI function 01 03 05 02 08 08/09 Cylinder type — Rim Rim — Rim 1 / " Mortise Sex bolt quantity #425 (optional) 8 4 4 4 4 4 1 4 88 Rim exit device Optional trims NL TP DT K EO Night latch Key retracts latchbolt Key locks thumbpiece Dummy trim Pull when dogged Key locks knob Exit only Product description 88NL x 608NL 88TP x 608TP 88DT x 608DT 88K x 606K1,2,3,5 88L x 880EO Trim description 608NL-R 608TP-R 608DT-R 606K-R 880EO-R Escutcheon plate size 15/8" x 13 1/2" x 3/16" 15/8" x 13 1/2" x 3/16" 15/8" x 13 1/2" x 3/16" 15/8" x 83/4" x 3/16" 3" x 143/16" x 3/32" Grip mounting center 51/2" 51/2" 51/2" — — Projection 21/6" 21/6" 21/6" 23/4" — ANSI function 03 05 02 08 01 Cylinder type Rim Rim — Rim — Sex bolt quantity #425 (optional) NR NR NR NR 4 I f no cylinder operation is required, specify “BE” blank escutcheon, trim always operable; example 88TP-BE. Matching dummy trim available,use suffix “DT”; example 88K-DT. Night latch function available, order 88NL x 880K-R rigid. 4 When using sex bolts, an 889 cover plate is required. See page 24. 5 When using on wood doors without sex bolts, “WDA” cover plate is required. See page 24. 6 Not available with E88. 7 The 373L is shipped L. An NL cylinder plate is also furnished standard (for operation only when key is used). NR-Not recommended 1 2 3 Notes Von Duprin 88 Series • 9 88-F Rim fire exit device The 268 Strike ships standard, optional strikes available 88-F fire exit rim devices for all types of 4' X 8' (1219 mm X 2438 mm) single and 8' X 8' (2438 mm x 2438 mm) double doors with 9954 mullion, UL listed, 3 hours. This device is handed. 88-F Rim fire exit device Finishes – US26, US26D, US3, US4, US10B, US10, SPBLK Specifications Device functions Handing Crossbar length Device centerline Crossbar centerline to finished floor Lock stile case Hinge stile case Crossbar tubing Projection Latch bolt Fasteners Electrical options Mechanical options Strikes 10 • Von Duprin 88 Series Device ships EO, NL, TP, L, K Handed 42" (1067 mm) field sizable 39 13/16" 36 13/16" (935 mm) at center 8 1/4" X 2 3/4" x 15/16" (210 mm x 70 mm x 24 mm) 6" X 1 3/4" x 15/16" (152 mm x 44 mm x 24 mm) 1" (25 mm) outside diameter Neutral – 4 3/4" (121 mm) Depressed – 4" (102 mm) Deadlocking – 3/4” (19 mm), throw All necessary mounting fasteners are included. RX Crossbar monitor switch in end case E Electric unlocking (BE trim only) RCB Reinforced crossbar KN Knurled crossbar 268 - Dull black RX Crossbar monitor switch • Signals use of an opening • SPDT switch to monitor crossbar Standard trims EO NL TP K L Exit only Night latch Key retracts latchbolt Key locks thumbpiece Key locks knob Key locks lever #06 Standard Product description 88EO-F 88NL-F 88TP-F 1 88K-F 1,5 88L-F 1,2,3,4 Trim description — 880NL-R Escutcheon plate size — 3" x 14 /16" x /32" 3" x 14 /16" x /32" 3" x 14 /16" x /32" 3" x 14 3/16" x 3/32" Grip mounting center — 5 1/2" 5 1/2" — — Projection — 2" 2" 2 /4" 2 5/8" ANSI function 01 03 05 08 08/09 Cylinder type — Rim Rim Rim 1 1/4" Mortise Sex bolt quantity #425 (optional)6 8 4 4 4 4 3 880TP-R 3 3 880K-R 3 3 373L 3 3 88-F Rim fire exit device Optional trims NL TP L Night latch Key retracts latchbolt Key locks thumbpiece Key locks knob Product description 88NL-F x 608NL 88TP-F x 608TP 88K-F x 606K1,3 Trim description 608NL-R 608TP-R 606K-R Escutcheon plate size 1 5/8" x 13 1/2" x 3/16" 1 5/8" x 13 1/2" x 3/16" 1 5/8" x 13 1/2" x 3/16" Grip mounting center 5 1/2" 5 1/2" — Projection 2 /6" 2 /6" 2 3/4" 1 1 ANSI function 03 05 08 Cylinder type Rim Rim Rim Sex bolt quantity #425 (optional)6 NR NR NR If no cylinder operation is required, specify “BE” blank escutcheon, trim always operable; example 88TP-F-BE. 2 When using on composite or wood doors, an 889 cover plate is required. See page 24. 3 Not available wtih E88-F. 4 The 373L is shipped L. An NL cylinder plate is also furnished standard (for operation only when key is used). 5 Night Latch Function available, order 88NL-F x 880K-R Rigid. 6 Sex bolts must be used on wood or composite fire doors. NR-Not recommended 1 Notes Von Duprin 88 Series • 11 8875 Mortise lock exit device The 575 Strike ships standard. 8875 mortise lock devices or all types of single or double doors, UL listed for accident hazard installations. Fits stock hollow metal doors with 86 cutouts and door stiles as narrow as 4 3/4" (121 mm). This device is field reversible but comes handed from factory. The 7500 mortise lock is equipped with a 3 /4" (19 mm) anti-friction latch bolt which is field reversible without removing the lock from the door. It has a non-handed auxiliary bolt for deadlocking and a faceplate with an adjustable bevel. Field selection of functions are furnished standard. TP and K function may be field selected by turning down a set screw in mortise lock body. Electric locking or unlocking options are available. Hex key dogging comes standard on 8875 Series mortise lock exit devices 8875 Mortise lock exit device Finishes – US26, US26D, US3, US4, US10B, US10, SPBLK Specifications Device functions Handing Crossbar length Device centerline Crossbar centerline to finished floor Latch bolt height to finished floor Lock stile case Lock case Faceplate Cylinder backset Hinge stile case Crossbar tubing Projection Latchbolt Fasteners and sex bolts (SBN) Electric options Mechanical options Strikes 12 • Von Duprin 88 Series Device ships EO, DT, NL, TP, K, L Handed 42" (1067 mm) field sizable 39 13/16" 36 13/16" (935 mm) at center 40 3/32" (1018 mm) at center 8 1/4" x 2 x 15/16" (210 mm x 51 mm x 24 mm) 4 5/8" x 5 3/4" x 1 1/16" (117 mm x 146 mm x 27 mm) 1 1/4" x 8" x 7/32" (32 mm x 203 mm x 6 mm) 2 3/4" (70 mm) 6" x 1 3/4" x 15/16" (152 mm x 44 mm x 24 mm) 1" (25 mm) outside diameter Neutral – 4 7/8" (124 mm) Depressed – 4" (102 mm) Deadlocking - 3/4" (19mm) throw Includes screw pack for 1 3/4" (44 mm) and 2 1/4" (57 mm) thick metal or wood doors. Sex nuts and bolts included. RX Crossbar monitor switch E8875 Electric mortise lock device RCB Reinforced crossbar KN Knurled crossbar 575 - Dull black RX Crossbar monitor switch • Signals use of an opening • SPDT switch to monitor crossbar E8875 Electric mortise lock device • Controls locking of the outside trim Standard trims EO NL TP DT K L Exit only Night latch Key retracts latchbolt Key locks thumbpiece Dummy trim Pull when dogged Key locks knob Key locks lever #06 Standard Product description 8875EO 8875NL 8875TP1 8875DT 8875K1,2 8875L1,2,3,4,5,6 Trim description — 880NL-M Escutcheon plate size — 3" x 14 /16" x /32" 3" x 14 /16" x /32" 3" x 14 /16" x /32" 3" x 14 /16" x /32" 3" x 14 3/16" x 3/32" Grip mounting center — 5 1/2" 5 1/2" 5 1/2" — 6 1/4" Projection — 2" 2" 2" 2 3/4" 2 5/8" ANSI function 01 03 05 02 08 08/09 Cylinder type — 1 1/4" Mortise 1 1/4" Mortise — 1 1/4" Mortise 1 1/4" Mortise Sex bolt quantity #425 (optional) 8 4 4 4 4 4 3 880TP-M 3 880DT-M 3 3 3 880K-M 3 3 373L 3 NL TP DT K EO Night latch Key retracts latchbolt Key locks thumbpiece Dummy trim Pull when dogged Key locks knob Exit only Product description 8875NL x 608NL 8875TP x 608TP 8875DT x 608DT 8875K x 606K1,2 8875L x 880EO Trim description 608NL-M 608TP-M 608DT-M 606K-M 880EO-M Escutcheon plate size 1 5/8" x 13 1/2" x 3/16" 1 5/8" x 13 1/2" x 3/16" 1 5/8" x 13 1/2" x 3/16" 1 5/8" x 8 3/4" x 3/16" 3" x 14 3/16" x 3/32" Grip mounting center 5 1/2" 5 1/2" 5 1/2" — — Projection 2/" 2/" 2/" 2 /4" — ANSI function 03 05 02 08 01 Cylinder type 1 1/4" Mortise 1 1/4" Mortise — 1 1/4" Mortise — Sex bolt quantity #425 (optional) NR NR NR NR 4 1 6 1 6 1 6 3 8875 Mortise lock exit device Optional trims If no cylinder operation is required, specify “BE” blank escutcheon, trim always operable; example 8875TP-BE. Matching dummy trim available,use suffix “DT”; example 8875K-DT. When using sex bolts, an 889 cover plate is required. See page 24. 4 When using on wood doors without sex bolts, “WDA” cover plate is required. See page 24. 5 The 373L is shipped L. An NL cylinder plate is also furnished standard (for operation only when key is used). 6 When used with E8875, no cylinder operation is available. Control furnished “BE”. NR-Not recommended 1 2 3 Notes Von Duprin 88 Series • 13 8875-F Mortise lock fire exit device The 575 Strike ships standard. 8875-F mortise lock fire exit devices for all types of 4' X 8' (1219 mm X 2438 mm) single and 8' X 8' (2438 mm x 2438 mm), UL listed, 3 hours. Fits door stiles as narrow as 4 3/4" (121 mm). The 7500 mortise lock is field reversible without removing the lock from the door. It has a nonhanded auxiliary bolt for deadlocking and a faceplate with an adjustable bevel. Field selection of functions are furnished standard. TP and K function may be field selected by turning down a set screw in mortise lock body. Electric locking or unlocking options are available. 8875-F Mortise lock fire exit device Finishes – US26, US26D, US3, US4, US10B, US10, SPBLK Specifications Device functions Crossbar length Device centerline Crossbar centerline to finished floor Latch bolt height to finished floor Lock stile case Lock case Faceplate Cylinder backset Hinge stile case Crossbar tubing Projection Latchbolt Fasteners and sex bolts (SBN) Electric options Mechanical options Strikes 14 • Von Duprin 88 Series Device ships EO, NL, TP, K, L 42" (1067 mm) field sizable 39 13/16" 36 13/16" (935 mm) at center 40 3/32" (1018 mm) at center 8 1/4" x 2 x 15/16" (210 mm x 51 mm x 24 mm) 4 5/8" x 5 3/4" x 1 1/16" (117 mm x 146 mm x 27 mm) 1 1/4" x 8" x 7/32" (32 mm x 203 mm x 6 mm) 2 3/4" (70 mm) 6" x 1 3/4" x 15/16" (152 mm x 44 mm x 24 mm) 1" (25 mm) outside diameter Neutral – 4 7/8" (124 mm) Depressed – 4" (102 mm) Deadlocking - 3/4" (19mm) throw Includes screw pack for 1 3/4" (44 mm) and 2 1/4" (57 mm) thick metal or wood doors. Sex nuts and bolts included. RX Crossbar monitor switch E8875 Electric mortise lock device RCB Reinforced crossbar KN Knurled crossbar 575 - Dull black RX Crossbar monitor switch • Signals use of an opening • SPDT switch to monitor crossbar E8875 Electric mortise lock device • Controls locking of the outside trim Standard trims EO NL TP Exit only Night latch Key retracts latchbolt Product description 8875EO-F 8875NL-F Trim description — 880NL-M Escutcheon plate size — 3" x 14 /16" x /32" 3" x 14 /16" x /32" 3" x 14 /16" x /32" 1 11/16" x 7 1/2" x 7/8" Grip mounting center — 5 1/2" 5 1/2" — — Projection — 2" 2" 2 3/4" 2 5/8" ANSI function 01 03 05 08 08/09 Cylinder type — 1 1/4" Mortise 1 1/4" Mortise 1 1/4" Mortise 1 1/4" Mortise Sex bolt quantity #425 (optional) 8 4 4 4 4 3 K L Key locks thumbpiece Key locks knob Key locks lever #06 Standard 8875TP-F1 8875K-F1 8875L-F1,2,3,4 880TP-M 3 3 880K-M 3 3 373L 3 NL TP L Night latch Key retracts latchbolt Key locks thumbpiece Key locks knob Product description 8875NL-F x 608NL 8875TP-F x 608TP1 8875K-F x 606K1 Trim description 608NL-M 608TP-M 606K-M Escutcheon plate size 1 5/8" x 13 1/2" x 3/16" 1 5/8" x 13 1/2" x 3/16" 1 5/8" x 13 1/2" x 3/16" Grip mounting center 5 1/2" 5 1/2" — Projection 2 /6" 2 /6" 2 3/4" 1 1 ANSI function 03 05 08 Cylinder type 1 1/4" Mortise 1 1/4" Mortise 1 1/4" Mortise Sex bolt quantity #425 (optional) NR NR NR 8875-F Mortise lock fire exit device Optional trims If no cylinder operation is required, specify “BE” blank escutcheon, trim always operable; example 8875TP-F-BE. 2 When using on composite or wood doors, an 889 cover plate is required. See page 24. 3 The 373L is shipped L. An NL cylinder plate is also furnished standard (for operation only when key is used). 4 When used with E8875-F, no cylinder operation is available. Control furnished “BE”. 5 Sex bolts must be used on wood or composite fire doors. NR-Not recommended 1 Notes Von Duprin 88 Series • 15 8827 Surface mounted vertical rod exit device Top latch 8827 Surface mounted vertical rod exit device 299 Top strike 248L-4 Bottom strike for use with flat threshold 8827 surface mounted vertical rod devices for all types of single and double doors, UL listed for accident hazard installations. Covers stock hollow metal doors with 86 cutout and fits door stiles as narrow as 2 1/2" (90 mm). This device is field sizable. Finishes – US26, US26D, US3, US4, US10B, US10, SPBLK Specifications Device functions Crossbar length Device centerline Crossbar centerline to finished floor Lock stile case Lock case Faceplate Cylinder backset Hinge stile case Crossbar tubing Projection Latchbolt Field reversible Device ships EO, DT, TP, K, L, TL 42" (1067 mm) field sizable 3913/16" 36 13/16" (935 mm) at center 8 1/4" x 2 x 15/16" (210 mm x 51 mm x 24 mm) 4 5/8" x 5 3/4" x 1 1/16" (117 mm x 146 mm x 27 mm) 1 1/4" x 8" x 7/32" (32 mm x 203 mm x 6 mm) 2 3/4" (70 mm) 6" x 1 3/4" x 15/16" (152 mm x 44 mm x 24 mm) 1" (25 mm) outside diameter Neutral – 4 7/8" (124 mm) Depressed – 4" (102 mm) 5 /8" (16mm) throw Fasteners and sex bolts (SBN) Rods/Latch guards Includes screw pack for 1 3/4" (44 mm) and 2 1/4" (57 mm) thick metal or wood doors. Sex nuts and bolts included. LBR (Less bottom rod) available for use with electric strike mounted in header and device supplied with pullman latch. Electrical options RX E Mechanical options RCB Reinforced crossbar KN Knurled crossbar PL Pullman latch top and bottom Top 299 - Dull black Bottom 248L-4 and 304L - unfinished Strikes Note: Maximum door undercut, 1/4" (6mm). 16 • Von Duprin 88 Series Crossbar monitor switch in end case Electric unlocking (BE trim only) 304L Bottom strike Bottom latch Hex key dogging comes standard on 8827 Series surface mounted vertical rod exit device RX Crossbar monitor switch • Signals use of an opening • SPDT switch to monitor crossbar Standard trims EO TP DT K L T Exit only Key locks thumbpiece Pull when dogged Key locks knob Key locks lever #06 Standard Key locks thumbturn (Pull required) Product description 8827EO 8827TP1,2 8827DT 8827K1,2,3 8827L1,2,4,5,6 8827TL1,5,6 Trim description — 880TP-V Escutcheon plate size — 3" x 14 /16" x /32" 3" x 14 /16" x /32" 3" x 14 /16" x /32" 11 /16" x 7 /2" x /8" 11 1/16" x 7 1/2" x 7/8" Grip mounting center — 5 1/2" 5 1/2" — — — Projection — 2" 2" 2 3/4" 2 5/8" 1 13/16" 880DT-V 3 3 3 880K-V 3 3 373L 3 1 377T x 880DT-V 1 7 01 05 02 08 08/09 11/12 — Rim — Rim 1 1/4" Mortise 1 1/4" Mortise Sex bolt quantity #425 (optional) 16 12 12 12 12 12 Optional trims TP DT Key locks thumbpiece Dummy trim Pull when dogged K Key locks knob EO Exit only Product description 8827TP x 608TP1,3 8827DT x 608DT 8827K x 606K1,3 8827L x 880EO Trim description 608TP-V 608DT-V 606K-V 880EO-V Escutcheon plate size 1 5/8" x 13 1/2" x 3/16" 1 5/8" x 13 1/2" x 3/16" 1 5/8" x 8 3/4" x 3/16" 3" x 14 3/16" x 3/32" Grip mounting center 5 1/2" 5 1/2" — — Projection 2 1/6" 2 1/6" 2 3/4" — ANSI function 03 02 08 01 Cylinder type Rim — Rim — Sex bolt quantity #425 (optional) NR NR NR 12 8827 Surface mounted vertical rod exit device ANSI function Cylinder type If no cylinder operation is required, specify “BE” blank escutcheon, trim always operable; example 8827TP-BE. Matching dummy trim available,use suffix “DT”; example 8827K-DT. Can be furnished with NL action, thumbpiece or knob operates only when key is used. Use suffix NL; example 8827TP-NL. 4 When using sex bolts, an 889 cover plate is required. See page 24. 5 When using on wood doors without sex bolts, “WDA” cover plate is required. See page 24. 6 The 373L and 377T are shipped L or TL. An NL cylinder plate is also furnished standard (for operation only when key is used). NR-Not recommended 1 2 3 Notes Von Duprin 88 Series • 17 8827-F Surface mounted vertical rod fire exit device 8827-F Surface mounted vertical rod fire exit device Top Latch 8827-F surface mounted vertical rod devices for all types of 8' X 8' (2438 mm x 2438 mm), UL listed, 3 hours. Fits door stiles as narrow as 3 3/4" (95 mm). This device is field reversible. Finishes – US26, US26D, US3, US4, US10B, US10, SPBLK 304L Bottom Strike Bottom Latch Specifications Device functions Crossbar length Device centerline Crossbar centerline to finished floor Lock stile case Lock case Faceplate Cylinder backset Hinge stile case Crossbar tubing Projection Latchbolt Fasteners and sex bolts (SBN) Electrical options Mechanical options Strikes 18 • Von Duprin 88 Series Field reversible Device ships EO, TP, K, L, TL 42" (1067 mm) field sizable 3913/16" 36 13/16" (935 mm) at center 8 1/4" x 2 x 15/16" (210 mm x 51 mm x 24 mm) 4 5/8" x 5 3/4" x 1 1/16" (117 mm x 146 mm x 27 mm) 1 1/4" x 8" x 7/32" (32 mm x 203 mm x 6 mm) 2 3/4" (70 mm) 6" x 1 3/4" x 15/16" (152 mm x 44 mm x 24 mm) 1" (25 mm) outside diameter Neutral – 4 7/8" (124 mm) Depressed – 4" (102 mm) 5 /8" (16mm) throw Includes screw pack for 1 3/4" (44 mm) and 2 1/4" (57 mm) thick metal or wood doors. Sex nuts and bolts included. RX Crossbar monitor switch in end case E Electric unlocking (BE trim only) RGB Reinforced crossbar KN Knurled crossbar PL Pullman latch top and bottom Bottom - 304L RX Crossbar monitor switch • Signals use of an opening • SPDT switch to monitor crossbar Standard trims EO TP K L T Exit only Key locks thumbpiece Key locks knob Key locks lever #06 Standard Key locks thumbturn (Pull required) Product description 8827EO-F 8827TP-F1,5 8827K-F1,5 8827L-F1,2,4 8827TL-F1,2,4 Trim description — 880TP-V Escutcheon plate size — 3" x 14 /16" x /32" 3" x 14 /16" x /32" 1 /16" x 7 /2" x /8" 1 11/16" x 7 1/2" x 7/8" Grip mounting center — 51/2" — — — Projection — 2" 2 3/4" 2 5/8" 1 13/16" ANSI function 01 05 08 08/09 11/12 Cylinder type — Rim Rim 1 1/4" Mortise 1 1/4" Mortise Sex bolt quantity #425 (optional)6 16 12 12 12 12 3 880K-V 3 3 373L 3 11 377T x 880DT-V 1 7 TP K Key locks thumbpiece Key locks knob Product description 8827TP-F x 608TP 8827K-F x 606K1 Trim description 608TP-V 606K-V Escutcheon plate size 1 /8" x 13 /2" x /16" 1 5/8" x 8 3/4" x 3/16" Grip mounting center 5 1/2" — Projection 2 1/6" 2 3/4" ANSI function 05 08 Cylinder type Rim Rim Sex bolt quantity #425 (optional) NR NR 5 1 3 8827-F Surface mounted vertical rod fire exit device Optional trims If no cylinder operation is required, specify “BE” blank escutcheon, trim always operable; example 8827TP-F-BE. When using on composite or wood doors, an 889 cover plate is required. See page 24. When using on wood doors “WDA” cover plate is required. See page 24. 4 The 373L and 377T are shipped L or TL. An NL cylinder plate is also furnished standard (for operation only when key is used). 5 Can be furnished with NL action, thumbpiece of knob operates nly when key is used. Used suffix NL; example 8827TP-NL-F. 6 Sex bolts must be used on wood or composite fire doors. NR-Not recommended 1 2 3 Notes Von Duprin 88 Series • 19 8847-F Concealed vertical rod fire exit device 8847-F Concealed vertical rod fire exit device 301L 8847-F fire exit concealed vertical rod devices for all types of 8" x 8" (2438 mm x 2438 mm) double metal doors, UL listed, 3 hours and fits door stiles as narrow as 4 3/4" (121mm). Finishes – US26, US26D, US3, US4, US10B, US10, SPBLK Specifications Device functions Handing Crossbar length Device centerline Crossbar centerline to finished floor Lock stile case Hinge stile case Crossbar projection EO, L, TL Field reversible 42" (1067 mm) field sizable 39 13/16" 36 13/16" (935 mm) at center Crossbar tubing Vertical rod Latchbolt 8 1/4" x 2 x 15/16" (210 mm x 51 mm x 24 mm) 6" x 1 3/4" x 15/16" (152 mm x 44 mm x 24 mm) Neutral – 4 7/8" (124 mm) Depressed – 4" (102 mm) 1" (25 mm) outside diameter 3 /8" (10 mm) hexagon 5 /8" (16mm) throw Fasteners All necessary mounting fasteners are included. Electrical options RX Crossbar monitor switch in end case E Electric unlocking (BE trim only) RCB Reinforced crossbar KN Knurled crossbar 301L Strike-bottom Mechanical options Strikes 20 • Von Duprin 88 Series RX Crossbar monitor switch • Signals use of an opening • SPDT switch to monitor crossbar Standard trims EO Key locks knob Key locks lever #06 Standard 8847EO-F 8847L-F1,2 8847TL-F1,2 — 371L 376T x 880DT-V-SA Escutcheon plate size — 1 11/16" x 7 1/2" x 7/8" 1 11/16" x 7 1/2" x 7/8" Trim description Grip mounting center — — — Projection — 2 5/8" 1 13/16" ANSI function 01 08/09 11/12 Cylinder type — 1 1/4" Mortise 1 1/4" Mortise Sex bolt quantity #425 (optional)6 4 4 4 8847-F Concealed vertical rod fire exit device 2 T Exit only Product description 1 L If no cylinder operation is required, specify “BE” blank escutcheon, trim always operable; example 8847L-F-BE. The 371 and 376T are shipped L or TL. An NL cylinder plate is also furnished standard (for operation nly when key is used). Notes Von Duprin 88 Series • 21 Trim options Function 01 Exit only 02 Pull when dogged 03 Key retracts latch bolt 05 Key retracts thumbpiece 06 Key locks lever 08 Key locks knob 08 Key locks lever 11/12 Key locks thumbturn 880EO 880DT 880NL 880TP 371-L 880K 373-L 377T or 376T x 880DT-V — 2" (51 mm) 2" (51 mm) 2" (51 mm) 2 5/8" (67 mm) 2 3/4" (70 mm) 2 5/8" (67 mm) 1 13/16" (46 mm) Trim number and dimensions Device/trim center line to finished floor Projection Trim options Rim Panic 880EO 88DT 88NL 88TP — 88K 88L — Fire 88EO-F — 88NL-Fp 88TP-Fp — 88K-Fp 88L-Fn — A 39 13/16 (1011 mm) A 39 13/16 (1011 mm) B 33 11/32 (847mm) A 39 13/16 (1011 mm) B 33 11/32 (847mm) — A 39 13/16 (1011 mm) B 36 13/16 (935 mm) A 39 13/16 (1011 mm) B 36 13/16 (935 mm) — — A 39 13/16 (1011 mm) B 33 11/32 (847mm) Panic 8875EO 8875DT 8875NL 8875TP — 8875K 8875L — Fire 8875EO-F — 8875NL-F 8875TP-F — 8875K-F 8875L-F — A 39 13/16 (1011 mm) A 39 13/16 (1011 mm) B 33 1/2 (851 mm) A 39 13/16 (1011 mm) B 33 1/2 (851 mm) A 39 13/16 (1011 mm) B 33 1/2 (851 mm) — A 39 13/16 (1011 mm) B 38 9/16 (979 mm) A 39 13/16 (1011 mm) B 38 9/16 (979 mm) — Ctr. line Mortise lock Ctr. line — Surface mounted vertical rod Panic 8827EO 8827DT — 8827TP — 8827K 8827L 8827TL Fire 8827EO-F — — 8827TP-F — 8827K-F 8827L-F 8827TL-F A 39 13/16 (1011 mm) A 39 13/16 (1011 mm) B 33 1/2 (851 mm) — A 39 13/16 (1011 mm) B 33 1/2 (851 mm) — A 39 13/16 (1011 mm) B 38 5/16 (973 mm) A 39 13/16 (1011 mm) B 38 5/16 (973 mm) A 39 13/16 (1011 mm) B 53 1/2 (1359 mm) — — — 8847L-F — — 8847TL-F — A 39 13/16 (1011 mm) B 53 1/2 (1359 mm) 4, 12 4 Ctr. line — Fire Concealed vertical rod 8847EO-F A 39 /16 (1011 mm) — — — A 39 13/16 (1011 mm) — B 41 11/16 (1059 mm) 4, 12 4 4, 12 4 13 Ctr. line — Additional snb requirements Cylinder type required 4/8/16 Rim — — Rim Rim — Rim Mortise — Mortise — — Mortise Mortise — Mortise Mortise — Vert. rod — — — Rim — Rim Mortise Mortise C.V.R. — — — — Mortise — — Mortise p Requires stainless steel trim for wood or composite fire doors. n Requires 889 Plate for wood or composite fire doors. Note: 8827-F uses 377T, 8847-F uses 376T. 22 • Von Duprin 88 Series 4, 12 Trim options Standard trim 880K 3" x 14 3/16" 880DT 3" x 14 3/16" 880NL 3" x 14 3/16" 880TP 3" x 14 3/16" 880 Series trim Heavy 10 gauge (2.4 mm) brass, bronze, or stainless steel. Available functions: 880DT, 880K, 880NL, and 880TP. Optional 880EO exit only trim plate is available. To order with the exit device, specify 88EOx880EO. 880EO 3" x 14 3/16" 377T 1 11/16" x 7 1/2" 373L 1 11/16" x 7 1/2" 373L/371L Series trim Lever control has a forged brass 7/8" (22 mm) thick escutcheon. An NL cylinder plate is included for lever operation only when key is used. BE blank escutcheon is available, specify 373L-BE. *880 Stainless Steel Trim used with fire rated rim device on wood doors. 377T Series trim Thumbturn control has a forged brass 7/8" (22 mm) thick escutcheon. Often used with DT trim or pull. An NL cylnder plate is included for thumbturn operation only when key is used. BE blank escutcheon is available, specify 377T-BE Trim options Optional trim 608DT 608 Series trim 608NL 608TP 606K Narrow design 3/16" (5 mm) thick brass, bronze, or stainless steel with flat pull grip. Available functions: 608DT, 608NL, and 608TP. When ordering with the exit device, specify 88NLx608NL. 606K Series trim Narrow design knob trim 3/16" (5 mm) thick brass, bronze, or stainless steel 3/16" (5 mm) escutcheon. Von Duprin 88 Series • 23 Strike/Stile information Strike application/Minimum stile Device type Standard single door Strike 88 88-F 299 268 STRIKE Strike options/Stile information 8875 8875-F 575 575 STRIKE 8827 Latch retraction 8827-F 8847-F Standard double door Stile 43/8" (111 mm) 43/8" (111 mm) STILE 43/4" (121 mm) 43/4" (121 mm) STILE 299 (top) 304L/248L-4 (bottom) Soffit latch (top) (bottom) 304L Soffit Latch (Top) 301L (Bottom) Strike w/mullion 299 x 4954 OPTIONAL single door Stile 4 11/16" (119 mm) Strike Stile Strike STILE 264 41/8" (105 mm) 41/8" (105 mm) 1409 33/8" (86 mm) 299 x 5254/5654 264 x 5254/5654 264 x 4954 4" (107 mm) 47/16" (113 mm) 43/4" (108 mm) 315/16" (100 mm) 1606 x 1654 — — 1609* 4" (107 mm) — — 1610** 47/16" (113 mm) — — — — STRIKE STILE STRIKE 575-2 576A-576B 575-2 576A-576B STILE 4 3/4" (121 mm) STRIKE — — — — — — — — STRIKE STILE Single door 213/16" (71 mm) 260U (top) Two vertical rod devices Vertical rod w/mortise lock device Two vertical rod devices Vertical rod w/mortise lock device 21/2" (64 mm) 385A (bottom) Two vertical rod devices 4 3/4" (121 mm) Vertical rod w/mortise lock device 4 3/4" (121 mm) 43/4" (121 mm) 3 3/4" (95 mm) 4 3/4" (121 mm) w/mullion*** 1606 411/16" (119 mm) STILE 268 x 9954 *Use for rim/vertical rod combination — consult factory. **Use for rim/vertical rod combination on stock hollow metal doors — consult factory. ***For mullion information, refer to the General and Auxiliary catalog. 24• Von Duprin 88 Series 24 OPTIONAL double door 385A (bottom) Single Door Two Vertical Rod Devices Vertical Rod w/Mortise Lock Device 43/4" (121 mm) 2 13/16" (71 mm) 21/2" (64 mm) 43/4" (121 mm) Strike options Strikes for rim devices 264 268 299 1409 — Blade stop Projection 9/16" (14 mm) Projection 13/16" (21 mm) Projection 13/16" (21 mm) Projection 1/2" (13 mm) 1606 1609 For rim/vertical rod, panic only consult factory Projection 3/8" (10 mm) Strikes for vertical rod devices 260U – Flush transom only 264 299 Projection 3/8" (10 mm) Projection 3/8" (10 mm) Projection 5/8" (16 mm) Mortise 2 1/2" (64 mm) 301L 304L 385A Mortise 3/4" (19 mm) Mortise 13/16" (21 mm) Mortise 2 1/2" (64 mm) Fold here 9/32” 15/16” 15/16” Shim (as needed to engage latch) Strike options 248L-4 Strikes for rim devices 575 575-2 576A – Not for use with astragals – For use on wood doors, contact door manufacturer 576B –A cceptable for 90 minute pair of hollow metal doors Von Duprin 88 Series • 25 88 Electrical options E8875 Electric mortise lock device E - Electric unlocking of outside trim (BE only) Available in Fail Secure (FSE) or Fail Safe (FS) options. 24VDC furnished as standard, 12 VDC available. To order, specify: 1. E prefix: The E8875 electric mortise lock device has all the versatility and advantages of the 8875 mortise lock device, plus the advantage of being electrically controllable by a remote switching device, an access control or automatic device, or an automatic fire alarm system. The E8875 feature controls the locking of the outside trim. When unlocked, the door remains latched, preserving the fire rating of the door and making it particularly useful where codes permit locking, but require unlocking during a fire emergency. Key override is an NL type function. -E371L-BE / E376L-BE = for use with concealed vertical rods -E373L-BE = for use with rim, surface vertical and mortise lock devices 2. FS or FSE 3. Voltage 4. Handing, LHR or RHR Magnetic switch Standard features: • Field reversible mortise lock • 24 VDC continuous duty solenoid Power supply PS-902 Desk console 88 Electrical options • Tamper resistant (auxiliary dead latch) • Silent operation • Corrosion resistant • Signaling functions • Key mechanically retracts latchbolt Optional features: • Fail safe (locked when energized, unlocked when de-energized or during power failure, specify with suffix “FS”). • Fail secure (unlocked when energized — specify with suffix “FSE”). Outside trim automatically relocks, unless held unlocked electrically. • 24 VAC (by adding SO option). • 12 VDC or 12 VAC with SO option. To order, specify: 1a. E8875 or E8875F. 1b. E7500 (if lock only is required). 2. FS or FSE. 3. Voltage. 4. Handing, LHR or RHR 5. Outside trim. “TP”, “TP-BE”, “K”, “K-BE” or “L-BE” function only. When using with “L” function, no cylinder operation is available. Outside control is furnished “BE”. 26• Von Duprin 88 Series 26 Electric feed-through hinge Adaptable for openings where continuous latching is required while the trim may be electrically locked or unlocked from a remote location — stairwells, exterior doors, etc. 88 Device options & accessories RG-27 Vertical rod and latch guard Series RG-27 Vertical rod and latch guards protect the bottom rods of exit devices from the damaging impacts of carts or gurneys passing through doors. (If bottom rods become damaged, the exit device will not function as intended and can jeopardize the ability to exit safely during an emergency.) 36" In addition to protecting the vertical rod, the guard provides a smooth, unobstructed surface so the door can be pushed open easily with the bumpers of a wheelchair. The latch guard portion is 10" high. The standard latch guard features a 45° ramp. The extended latch guard offers a continuous ramp in 3' or 4' widths. All stainless steel construction in US32D finish. Latch guards can cover latches as large as 1 1/4"W x 10"H x 1 7/8" projection. 88 Device options & accessories Rod guard Extended latch guard Latch guard 10" 12" 3' or 4' 4 3/8" 2 1/4" Models RGO Rod guard only (projection 1 3/16") RG-27 Rod and latch guard RG-27-3 3' (914mm) Rod guard and extended latch guard RG-27-4 4' (1219mm) Rod guard and extended latch guard LGO Latch guard only LGO-3 3' (914mm) Extended latch guard only LGO-4 4' (1219mm) Extended latch guard only When using on wood fire doors, high density block is required. To order, specify: 1. Model number. 2. Handing (except on RGO). 3. Door material if other than hollow metal. 4. Optional sex bolt mounting available. Von Duprin 88 Series • 27 27 Device options & accessories Cover plate kits Device Controls 882 Kit For use to cover mortise lock or discontinued device cut-outs. Specify finish. #10 WDA Kit #10 WDA Kit 15/8" (41mm) Required when 373L or 377T controls are used on wood doors with the following devices: 88L, 8827L, 8827TL, 8827TL-F, or 8875L (kit covers cutout and prevents control from damaging door). 4" (102mm) 21/2" (64mm) Device options & accessories 12" (305mm) 10" (254mm) 9" (229mm) 887 Kit Required for 88 rim/8827 vertical rod device combinations on pairs of doors with ANSI 161 cutout. (The 88 rim device backset is increased and exposes the 161 cutout when used with 8827). 13/4" (44mm) 1 /8" (41mm) 889 Kit Required when 373L controls are used with sex bolts (sex bolts must be used on wood or composite fire doors). Four studs on cover plate allow through-bolting to the device center case. 10" (254mm) 9" (229mm) 888 Kit Required for 8875 mortise or 8827 vertical rod devices on doors with ANSI 161 cutouts (device center case will not cover stock cutout). 15/8" (41mm) To order, specify: 1. Kit number. 2. Finish. 3. Device type (889 kit only). 10" (254mm) Axle security pin Non-removable security pin can be inserted into lever arm axle to prevent tampering or removal of lever arm. To order, specify Part Number 033022 (package of 50). 28• Von Duprin 88 Series 28 889 Kit 5 Additional information UL Listed — Fire exit hardware label/opening size Double door Exit device Single door With mullion Same direction vert./vert. Same direction vert/ mortise Double egress 88-F 3 Hour 4' X 8' 3 Hour 8' X 8' — — — 8875-F 3 Hour 4' X 10' — — 3 Hour 8' X 10' — 8827-F — — 90 Min. 8' X 8' 3 Hour 8' X 8' 3 Hour 8' X 8' 8847-F — — 90 Min. 8' X 8' 3 Hour 8' X 8' 3 Hour 8' X 8 ANSI Function, grade & type Grade 1 type 1 Grade 1 type 2 Grade 1 type 3 Grade 1 type 8 01 88EO, 88EO-F 8827EO, 8827EO-F 8875EO, 8875EO-F 8847EO-F 02 88DT 8827DT 8875DT — 03 88NL, 88NL-F — 8875NL, 8875NL-F — 05 88TP, 88TP-F 8827TP, 8827TP-F 8875TP, 8875TP-F — 06 — 8827TP-NL, 8827TP-NL-F 08 88K, 88K-F, 88L, 88L-F 8827K, 8827K-F 8827L, 8827L-F 8875K, 8875K-F 8875L, 8875L-F 8847L-F 09 88L-NL, 88L-NL-F 8827K-NL, 8827K-NL-F, 8827L-NL, 8827L-NL-F 8875L-NL, 8875L-NL-F 8847L-NL-F 09 — 8827TL-NL, 8827TL-NL-F — 8847TL-NL-F 11-12 — 8827TL, 8827TL-F — 8847TL-F Additional information Function Von Duprin 88 Series • 29 Additional information Function conversion kits Device type Kit Converts from – Converts to – Use with trim 88 CK-NL TP, K NL 880NL-R CK-TP EO, DT, NL, K TP 880TP-R CK-K/L EO, DT, NL, TP K 880K-R CK-K/L EO, DT, NL, TP L 373L x 889 Plate (NL, DT, TP) CK-NL-F TP-F, K-F NL-F 880NL-R CK-TP-F EO-F, NL-F, K-F TP-F 880TP-R CK-K/L-F EO-F, NL-F, TP-F K-F 880K-R CK-K/L-F EO-F, NL-F, TP-F L-F 373L x 889 Plate (NL, DT, TP) CK27-TP EO, DT, K (std. or fire) TP (std. or fire) 880TP-V CK27-K/L EO, DT, TP (std. or fire) K (std. or fire) 880K-V CK27-K/L EO, DT, TP (std. or fire) L (std. or fire) 373L x 889 Plate (NL, DT, TP) CK27-TP-NL EO, DT, K (std. or fire) TP-NL 880TP-V CK27-K-NL EO, DT, K (std. or fire) K-NL 880K-V 88F 8827, 8827-F Additional information Conversion kits are required for 88 rim and 8827 devices. To convert functions on 8847 and 8875 devices, only new trim is required. The 8875 mortise lock is field convertible for function. 30• Von Duprin 88 Series 30 88 Series finishes Finishes* US Number BHMA Number Chromium, polished US26 625 Chromium, dull US26D 626 Brass, polished US3 605 Brass, dull US4 606 Bronze, dull-oxidized US10B 613 Bronze, dull US10 612 Sprayed black SPBLK Finishes Color * Note: Durable powder coated finishes available at specific special request. PLEASE CONTACT FACTORY. Von Duprin 88 Series • 31 Notes 32 • Von Duprin 88 Series About Allegion Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 8,000 people and sells products in more than 120 countries across the world. Allegion comprises more than 25 global brands, including strategic brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. For more, visit www.allegion.com © 2014 Allegion 005966, Rev. 11/14 www.allegion.com/us
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.5-c021 79.153613, 2013/07/11-05:21:54 Format : application/pdf Subject : null Description : Exit Devices Modified : 2016:01:04 16:33:55.709Z Title : Von Duprin 88 Series Catalog Size : 4012603 Sha 1 : 01ddea66bf694b18378e45e54bd3ffea3f7bf19c Extracted : 2016:12:06 21:21:51.582Z Modify Date : 2014:12:04 13:33:29Z Create Date : 2014:12:04 13:33:07Z Metadata Date : 2014:12:04 13:33:29Z Creator Tool : Adobe InDesign CS6 (Macintosh) Rendition Class : proof:pdf Document ID : xmp.id:0F18E18E0B2168118083946D2B575BF4 Original Document ID : xmp.did:f706f4f7-8d7d-4b9a-aea2-49154b45a623 Instance ID : uuid:4677218f-0eed-ac46-abfc-fd51df80c120 Derived From Rendition Class : default Derived From Instance ID : xmp.iid:0E18E18E0B2168118083946D2B575BF4 Derived From Document ID : xmp.did:66AD6555972168118083D60E1226AE21 Derived From Original Document ID: xmp.did:f706f4f7-8d7d-4b9a-aea2-49154b45a623 History Action : converted History Software Agent : Adobe InDesign CS6 (Macintosh) History Parameters : from application/x-indesign to application/pdf History When : 2014:12:04 13:33:07.000Z History Changed : / Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 34 Creator : Adobe InDesign CS6 (Macintosh) Keywords : Exit, DevicesEXIF Metadata provided by EXIF.tools