Voxware BTH430 Bluetooth Modular Headset, Single-Ear (Mono) User Manual BT HD 1 USER gUIDE
Voxware, Inc. Bluetooth Modular Headset, Single-Ear (Mono) BT HD 1 USER gUIDE
Voxware >
Users Manual
BTH430 Quick Start Guide v.1 Quick Start Guide Part No: BTH4XX Manual v1.0 BTH430 Quick Start Guide v.1 Contents Thank You ..................................................................................................................................................... 2 Please Read this Owner’s Guide .................................................................................................................. 2 Features ........................................................................................................................................................ 2 Charge the Battery ....................................................................................................................................... 3 Connecting Headset to Device ..................................................................................................................... 4 Pairing ........................................................................................................................................................... 4 Position the Boom ........................................................................................................................................ 5 Adjust Headband .......................................................................................................................................... 5 Headband Disassembly ................................................................................................................................ 6 Install Windscreen and Ear Cushion ............................................................................................................ 6 Understanding LED Lights and Tones .......................................................................................................... 7 Cleaning and Maintenance .......................................................................................................................... 7 Troubleshooting ........................................................................................................................................... 8 Battery Safety Guidelines ............................................................................................................................ 9 Safety and Regulatory Information ........................................................................................................... 10 Part No: BTH4XX Manual v1.0 BTH430 Quick Start Guide v.1 Thank You We appreciate your purchase of the Voxware™ BTH430 Bluetooth® Headset. This rugged wireless Headset combines high-quality audio performance, environmental durability, and lightweight comfort without sacrificing stability during active use. Please Read this Owner’s Guide Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your Headset properly and enjoy its advanced features. Please save this guide for future reference. Features Part No: BTH4XX Manual v1.0 BTH430 Quick Start Guide v.1 Charge the Battery 1. Insert plug into charger. 2. Insert Multi-Country AC adapter into power outlet. 3. Insert Battery into the charger. Charge for 3 hours prior to use. Insert the Battery 1. Insert battery into headset until firmly seated. Part No: BTH4XX Manual v1.0 BTH430 Quick Start Guide v.1 Connecting Headset to Device To use the BTH430 Headset with a Bluetooth Device (or “Host”), such as a mobile computer or industrial tablet, you must first establish a wireless connection between the Headset and the intended Device. This process is called “Pairing”. Note: In order to avoid accidently pairing the Headset to multiple Devices, Headset may only be paired to one device at a time. Pairing The Headset may be paired with Bluetooth devices in the following three ways: 1. Touch-to-Pair with devices supporting an NFC Connection. 2. Scan-to-Pair with devices supporting Bluetooth Mac Address Scanning. 3. Standard Bluetooth pairing where the headset is discovered by the Host. Headset must be within close proximity of the host to complete pairing. To initiate pairing, Headset must be powered off. If the headset is on, turn off by pressing the Multi-Function Button for 2 seconds. Initiate headset pairing by pressing the Multi-Function Button for 12 seconds until you hear “Pairing” and the LED alternately flashes red and blue. 1. For Touch-to-Pair, touch Headset NFC tag, located in the microphone assembly, to NFC tag of Host. 2. For Scan-to-Pair, activate Host scanning function and scan Headset Bluetooth Mac Address Barcode Label. 3. For Standard Bluetooth pairing, use the Host’s Bluetooth search and pairing functionality (refer to the Host documentation if necessary) and select “BTH430”. If necessary, enter four zeros (0000) for the passcode and accept connection. Once successfully paired, you will hear “Pairing Successful” and the LED will flash blue, once every two seconds indicating the Headset and Host are connected. The Headset may be paired to a new Host using the above procedure. Note that this will undo the pairing to the current Host. Once the Headset and Host have been paired, the Headset and Host will automatically reconnect the next time they are both powered on and in close proximity to each other. Part No: BTH4XX Manual v1.0 BTH430 Quick Start Guide v.1 Position the Boom Do not rotate the boom beyond the stop point. *Applies to Mono and Binaural Model. The Behind the Neck model has only left side boom placement. Adjust Headband The headband can be squeezed for a tighter or a looser fit to the head. The stainless steel head band will click as it is positioned into place. When adjusting the headband: • Position the ear pad in the center of the ear. • Position the T-Bar above the ear, half way between the top of the ear and the top of the head. Part No: BTH4XX Manual v1.0 BTH430 Quick Start Guide v.1 Headband Disassembly 1. Loosen the Headband Set Screw Counterclockwise 2. Remove Bluetooth Headset Module from Headband Module 1. 2. Install Windscreen and Ear Cushion Part No: BTH4XX Manual v1.0 BTH430 Quick Start Guide v.1 Understanding LED Lights and Tones Primary Features Pairing Low Battery Warning Headset Control With Power Off, Press MultiFunction Button for 4 Seconds Automatic Press Multi-Function Button for 2 Seconds Press Multi-Function Button for 2 Seconds Press Volume + or Volume - to Increase or Decrease Volume Automatic Automatic Press Multi-Function and Volume- for 7 Seconds Automatic Low Battery Shutdown Auto Shutdown Automatic Automatic Pairing Complete Power On Power Off Volume Connected Connection Lost Clear Paired Device List LED Light Blue and Red Alternate Flash No LED Output Blue Flash 3 Times Tones “Pairing” Red Flash 3 Times “Power Off” or 4 Note Falling Scale < Increase Volume >Decrease Volume Double Short “Lost Connection” Double Low No LED Output No LED Output Blue Solid Red Alternate Flash 5 Times Red Flash Twice Every 2 Seconds Red Flash 3 Times Red Flash 3 Times then Power Off “Pairing Successful” “Power On” “Low Battery” 4 Descending 4 Descending The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Voxware™ is under license. Other trademarks and trade names are those of their respective owners. Cleaning and Maintenance To maintain the BTH430 Headset we suggest the following guidelines: • Do not expose the Headset to harsh chemicals or cleaning agents. • The Battery must be fully inserted and locked into place in order for it to become IP67 Waterproof. Do NOT immerse the Headset in water beyond 3 feet (1 meter) for beyond 30 minutes per IP-67 Specifications. • If the Headset becomes dirty, wipe it with a soft damp cloth. Do not use soap, cleaning fluids or chemicals. • Keep dust, dirt and debris out of the Headset Battery Slot and the Battery Charger Slots. • When handling the Headset Battery, keep the Battery Contacts free of dirt, grease, oil and other substances that can affect the Battery from making proper contact with the Headset or Charger. • Battery contacts must be covered with protective sleeve to prevent short circuit and discharge after the Battery is removed from the headset. Part No: BTH4XX Manual v1.0 BTH430 Quick Start Guide v.1 Troubleshooting Operation Operating Problem Headset will not Turn On Pairing Does not Pair Headset appears to be paired but cannot communicate with intended Bluetooth Device Charging Battery Battery does not seat properly in the Charging Slot No LEDs Light on Charger when Battery is inserted Part No: BTH4XX Manual v1.0 Possible Solution Make sure Battery is fully seated in Headset. Make sure Battery is charged by placing Battery in Battery Charger and following the Battery charging instructions. Headset should be off when beginning pairing process. Make sure intended Bluetooth Device is on. Make sure Headset is within 12 inches of intended Bluetooth Device. Make sure you select “ModCom One” on your Bluetooth Device search menu. Headset may be connected with different Bluetooth Device. 1. Make sure intended Bluetooth Device is within 12 inches of Headset. 2. Make sure all other non-intended Bluetooth Devices are 6 feet away from Headset. 3. Turn off Headset and start pairing process again. Rotate Battery and re-insert into Charging Slot. Check Power Cable connection to Charger. Battery may be faulty. Replace Battery. BTH430 Quick Start Guide v.1 Battery Safety Guidelines • • • • • • • • • • • • • • • The area in which the Batteries are charged should be clear of debris and combustible materials or chemicals. Improper Battery use may result in a fire, explosion, or other hazard. To charge the Headset Battery, the Battery and Charger temperatures must be between 41°F – 95°F (5°C – 35°C). Do not use incompatible Batteries and/or Chargers. Use of an incompatible Battery or Charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a Battery or a Charger, contact your Distributor Customer Support. Do not disassemble, open, crush, bend, deform, puncture, or shred. Severe impact from dropping any Battery-Operated Device on a hard surface could cause the Battery to overheat. Do not short circuit a Battery or allow metallic or conductive objects to contact the Battery terminals. Use the supplied protective Battery Sleeve when Battery is removed from Headset. Do not modify or remanufacture, attempt to insert foreign objects into the Battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the Battery in or near areas that might get very hot, such as in a parked vehicle, near a radiator or other heat source. Do not place Battery into a microwave oven, conventional oven, toaster oven, washer, dryer, dishwasher, or other mechanical devices. Battery usage by children should be supervised. Please follow local regulations to promptly dispose of used re-chargeable Batteries. Do not dispose of Batteries in fire. Seek medical advice immediately if a Battery has been swallowed. In the event of a Battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact is made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your Headset or Battery, contact your Distributor Customer Support to arrange for inspection. Part No: BTH4XX Manual v1.0 BTH430 Quick Start Guide v.1 Safety and Regulatory Information • Warnings for use of Wireless Devices. Please observe all warning notices with regard to the usage of wireless devices. • Potentially Hazardous Atmospheres – Vehicles Use. You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. • Potentially Hazardous Atmospheres – Fixed Installations. You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders). • Contains small parts which can be a choking hazard. • Not suitable for children under age 3. • This product contains magnets which can be harmful to pacemakers, or similar medical devices. • To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. • As with any electronic products, use care not to spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard. • Do not place any naked flame sources, such as lighted candles, on or near the apparatus. • Use caution when using your headset while operating a vehicle or engaging in any activity that requires your full attention. Check and follow local laws regarding mobile phone and headset use. Some jurisdictions impose specific limitations, such as single earpiece configuration, on the use of such products while driving. • Sounds that you rely on as reminders or warnings may sound different when using a headset. Be aware of how these sounds may vary in character so you can recognize them as needed. Part No: BTH4XX Manual v1.0 • Do not leave a battery on prolonged charge when not in use. CAUTION: Do not make modifications to the headset or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and product performance and warranty. • Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when using a headset, especially for extended periods. • Use only with the supplied power supply meeting local regulatory requirements (ex. UL, CSA, VDE, CCC). • Use caution when using a Headset while operating a motor vehicle or anywhere the inability to hear outside sounds may present a danger to you or others. • The BTH430 Headset does not require scheduled cleaning. Should cleaning be necessary, simply wipe the outside surfaces with a soft damp cloth. Regulatory Information All Voxware™ devices are designed to be compliant with rules and regulations in the locations they are sold and will be labeled as required. This regulatory information applies to Model number BTH430. International This device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. Wireless Device Country Approvals Regulatory markings, subject to certification, are applied to the device signifying the radio (s) is/are approved for use in the following countries: United States, Canada, and Europe. Note: Europe includes Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, 10 BTH430 Quick Start Guide v.1 Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Changes or modifications not expressly approved by Voxware, Inc.™ could void the user’s authority to operate this equipment. CE NOTICE TO USERS Voxware, Inc.™ hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2011/65/EU and all other applicable EU directive requirements. In USA and Canada: This device complies with part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC NOTICE TO USERS This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. It must not be co-located or be operating in conjunction with any other antenna or transmitter. In the United States: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the Headset Charger to an outlet on a different circuit than the one to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Part No: BTH4XX Manual v1.0 Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1. l'appareil ne doit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le functionnement. This class B digital apparatus complies with CAN ICES-3 (B) / NMB-3 (B) Waste Electrical and Electronic Equipment This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city/town office or the distributer where you purchased your equipment. 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Bill Kyle Company : Hewlett-Packard Create Date : 2017:08:16 15:13:29-04:00 Modify Date : 2017:08:16 15:13:40-04:00 Source Modified : D:20161027224129 Language : EN-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2017:08:16 15:13:40-04:00 Creator Tool : Acrobat PDFMaker 15 for Word Document ID : uuid:3ca2ce28-0e39-4df7-843f-2f3edfe6163c Instance ID : uuid:fb2a4e0d-b496-4947-994d-911fbdc781ae Subject : 3 Format : application/pdf Title : BT/HD-1 USER gUIDE Creator : Bill Kyle Producer : Adobe PDF Library 15.0 Page Layout : OneColumn Page Count : 12EXIF Metadata provided by EXIF.tools