Voxware VLS410C352 Digitally Modulated Transmitter User Manual User Guide UPDATED

Download:
Mirror Download [FCC.gov]
Document ID	472511
Application ID	6/F6kt76Q3OOjsdmMMo8RA==
Document Description	User Guide UPDATED
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.21kB (177567 bits)
Date Submitted	2004-09-24 00:00:00
Date Available	2004-09-23 00:00:00
Creation Date	2004-09-24 14:19:22
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2004-09-24 14:19:22
Document Title	Microsoft Word - User Guide UPDATED.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Donna Kearney

VLS-410 Technical Specifications
Processor
OS
Runtime Memory
(SDRAM)
Storage Memory
(Flash)
Battery Life
Hardware Interface
Ports
Weight
Batch Mode
(buffered results)
Radio Support
TTS (Text-toSpeech) Engine
Internal Card
Support
PXA255,
400 Mhz
WinCE.NET
128Mbyte
Green light will blink slowly (once every 3
seconds ) during a software upgrade
Reset
button
Green light will blink normal (once a
second) once the browser is started.
Battery
Pack
64Mbyte
>10 hrs
2 serial, USB Client
Suspend/ Resume button
& Power LED
22 ounces with
battery
Yes
WIFI 802.11b;
Symbol 802.11
Cepstral, higher
quality male voice
PCMCIA/CF,SD
Power LED Status
Battery Release
button
Approved Accessories
The accessories listed below are approved
for use with the VLS-410 and the use of any
other accessories is prohibited.
Metrologic Bar Code Scanner Model # IS 4220
Caution! Changes and modifications
not expressly approved by Voxware,
Inc. could void the user’s authority to
operate the equipment. This product
must be professionally installed.
Available with Voxware
compatible cable from
Accucode +1-303-639-6111
VLS Pouch
Available from Voxware
VLS Headset
Available from Voxware
Green light will remain solid for 30
seconds or so when unit is booted up.
Red light will blink fast if the unit has an
error during the system install.
No lights are normal when the unit runs
out of battery or suspends.
Alternate Red and Green blinking lights
(once a second) is normal when the unit
is out of range.
Battery Change Procedures
1. Press & release the SUSPEND/RESUME
button.
2. WAIT for the power light to go out
(approximately 1.5 seconds).
3. Press the battery release button and lift
out the battery pack.
4. Take a fully charged battery pack from
the battery charger.
5. Press down firmly on the battery pack until
you hear a small click.
NOTE: After suspending the device and removing
the battery, if a new battery is not inserted
within 7 minutes then the unit will RESET when
the battery is inserted.
Suspending the Unit
To SUSPEND the unit do the following:
1. Press & release the
SUSPEND/RESUME button. The power
light will go out in 1.5 seconds.
Warning! Holding down the SUSPEND/RESUME
button for more than 8 seconds will RESET the
VLS–410 device.
To RESUME the unit (after suspending it) just
press & release the SUSPEND/RESUME button
again.
Notes:
The VLS-410 unit will automatically go into
Suspend mode when the battery charge is
below 5%. In this instance, the battery will
remain in Suspend mode for up to 2 days,
if not removed sooner.
VLS-410 Software
Update Messages
On occasion your device will need to be updated
with new software/files. When this occurs you will
hear one of the following messages:
Message
Installing new
application version
Updating Browser
files
Updating Shell files
Installing new system
version
Updating TTS files
Software Type
Application
Browser
Shell
System Build
TTS
Resetting the Unit
Method 1:
1. Remove the battery (while the unit is On).
2. Wait for the power light to go out
(approx. 1.5 seconds).
3. Put the battery back on again.
Method 2:
1. Press for more than 8 seconds the
SUSPEND/RESUME button.
Method 3: Cold Hardware Reset.
1. Press & release the SUSPEND/RESUME
button.
2. Wait for the power light to go out
(approx. 1.5 seconds).
3. Press the RESET button. A cold hardware
reset
of the unit is performed.
Warning! Pressing the RESET button when the
unit is ON may cause a loss of data.
Regulatory Information
This equipment is within SAR (specific absorption
rate) limits for a portable device in contact with the
body.
The maximum SAR measurement in
Voxware’s supplied pouch is 0.011W/kg Body.
Industry Canada: This device has been designed to
operate with an antenna having a maximum gain of 0
dB. An antenna having a higher gain is strictly
prohibited per regulations of Industry Canada. The
required antenna impedance is 50 Ohms. To reduce
potential interference to other users, the antenna
type and its gain should be so chosen so that the
equivalent isotropically radiated power (EIRP) is not
more than that required for successful
communication.
Voxware
VoiceLogistics®
VLS-410
Tech Specs
Usage
Procedures
Version 7 9/16/04

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2004:09:24 14:19:22-04:00
Modify Date                     : 2004:09:24 14:19:22-04:00
Page Count                      : 2
Creation Date                   : 2004:09:24 18:19:22Z
Mod Date                        : 2004:09:24 18:19:22Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Donna Kearney
Metadata Date                   : 2004:09:24 18:19:22Z
Creator                         : Donna Kearney
Title                           : Microsoft Word - User Guide UPDATED.doc

EXIF Metadata provided by EXIF.tools