Voxx Accessories PNMDUAL5M WiFi Monitor User Manual
Voxx Accessories Corp. WiFi Monitor
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3558174 |
| Application ID | wJGOEJlrq4Dn0YDyjC2MyA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 61.74kB (771696 bits) |
| Date Submitted | 2017-09-12 00:00:00 |
| Date Available | 2018-03-12 00:00:00 |
| Creation Date | 2017-07-07 11:24:33 |
| Producing Software | Acrobat Distiller 10.1.0 (Windows) |
| Document Lastmod | 2017-07-07 11:24:33 |
| Document Title | untitled |
| Document Creator | Adobe InDesign CC 2017 (Macintosh) |
DUAL CONNECT BABY MONITOR with Wi-Fi viewing and dedicated parent unit What’s inside Welcome! .............................................................. xx Getting started .................................................... xx Tour of the system ............................................. xx Everyday use........................................................ xx Motion detection ............................................ xx Sound detection ............................................. xx Auto-record time............................................ xx Battery life ......................................................... xx Temperature alarm ........................................ xx Music .................................................................... xx Share camera with friend ........................... xx Flip horizontally / vertically ....................... xx Camera time set ............................................. xx Camera info ...................................................... xx Delete Camera ................................................. xx Troubleshooting / FAQs .................................. xx User Guide PNMDUAL5 Getting Started WELCOME! This WiFi Baby Monitor makes it simple to keep your eyes and ears on your little one from home or from anywhere! This guide takes you through the steps to get started! Check out our setup videos FPO On your computer, go to http://bit.ly/pnwifi-setup or scan the QR code here. Before you start... Make sure you read the Important Information sheet included in this package. Step 1: Unpack Rechargeable WiFi camera Parent monitor The accessories: (2) charging cables (2) power adapters (2) Mounting screws (1) 8GB Micro SD card (pre-installed in the camera) Step 2: Charge the monitor Find one of the charging cables included in this package. Getting Started GETTING STARTED Step 3: Position the camera(s) Find a location for the camera that gives you the best view of your baby in his or her crib. Plug one end of this cable into the USB CHARGING jack on the side of the parent monitor. Plug the other end of the charging cable into one of the included charging adapters. Then plug the adapter into an outlet or surge protector. Place the camera on a flat surface, like a dresser or shelf, or mount the camera to a wall using the keyhole slots on its bottom (see the mounting template included in this package). IMPORTANT: NEVER place the camera or cords of any kind inside the crib. NEVER place the camera or cords within reach of the baby. WARNING Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (0.9m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. Getting Started Step 4: Test your WiFi signal Your Project Nursery WiFi Camera needs strong enough signal from your WiFi router in order to send its video signal. Here’s how to test the strength of your WiFi signal in your baby’s nursery using your smartphone or other portable wireless device (like a tablet or iPod touch). Step 5: Plug in the camera Plug one end of the included charging cable into the DC In jack on the back of the camera. First, go to where you want to put the camera. Make sure your smartphone or other portable wireless device is connected to the WiFi network you want to test. Look at the WiFi icon on your device screen to see the strength of the connection. For example, on iOS devices look in the upper left-hand corner of the screen for the WiFi icon (shown here). For best results, look for a location with at least 50% strength to use the WiFi camera. Plug the other end into the included power adapter. Then plug the adapter into an outlet or surge protector. The camera turns on automatically when you plug it in (the indicator light on its back panel turns solid red). In the Google Play or Apple App Stores, search for “PROJECT NURSERY MONITOR” and look for the icon shown here. Then download and install the App. Getting Started Step 6: Download and install the Project Nursery Monitor App on your phone or tablet Step 8: Create a Project Nursery user name and password ® Register Login The first time you launch the Project Nursery App, you’ll need to create a user name and password so that you can access your camera securely. Press the Register button to start, then follow the steps to set up your account. IMPORTANT: Make sure you give a valid email address that you have easy access to. The App will use this address if you ever need to recover or reset your password. Step 7: Launch the Project Nursery Monitor App Once the Project Nursery Monitor App has installed on your smarphone or tablet, press the icon to launch the App. Username Email Address Password Confirm Password IMPORTANT! You must connect the WiFi camera through the App on your phone or tablet before you can connect it to the parent monitor. Once you’ve finished creating your user name and password, the App will ask you to Login with the name and password you created. Sign Up IMPORTANT: Your user name cannot contain special characters (like “@”)—only letters and numbers. Getting Started Step 9: Pair the WiFi camera with the App. Make sure the Project Nursery App is open on your phone or tablet. Also make sure that your phone or tablet is connected to your WiFi network. ® ® Device List Message In the App’s home screen, press the icon (Add Camera) in the upper right corner of the screen. My Center Add Camera Add new camera with WiFi Add new camera with QR code In the next screen, press the Add new camera with WiFi button. Get shared camera from friend The App will prompt you to make sure your camera is on. If you haven’t already turned it on, press the POWER button on the right side of the camera (the camera’s LED lights up), then press the Next step button in the App. Add Camera Scan QR code located on bottom of camera Press to open QR code scanner The next screen in the App lets you name the camera you’re setting up and prompts you to scan the QR code on the bottom of the camera. ID: Camera name: Next step To name the camera you’re setting up: Press in the Camera name field and enter the name you want to use. To scan the QR code on the WiFi camera: Find the QR code on the bottom of the WiFi camera. Position your smartphone or tablet so that its camera can scan this QR code. Then press where indicated in the App to scan this QR code. 2. Choose WiFi SSID (or network name) and enter password below. Make sure you enter the info correctly. If your WiFi SSID does not have a password, you will need to create one. This is for your safety and security. Consult the user guide for your WiFi router/AP to add a password. Helpful Hint: Click on the lock icon in the password area to hide or display text. 3. After you’ve entered your WiFi info below, press “Next step.” Your camera will begin connecting to your WiFi network. This can take 2–3 minutes to complete. When you hear two beeps and the LED turns solid green, your camera is successfully connected and ready for you to use. Next step After you’ve scanned the QR code on the bottom of the WiFi Camera, the App will ask you to press the SET button on the bottom of the camera and enter the name (WIFI SSID) and password of your WiFi network. Find the SET button on the bottom of the WiFi camera. Press it for one second (until the camera gives an audio signal). Enter the name (WIFI SSID) and password for your home WiFi network in the App. Next step IMPORTANT: Double check that you’ve typed your network name and password correctly— otherwise, the camera won’t work with the App! Once you’ve finished entering your network name and password, press the Next step button on the App screen. The indicator light on the back of the WiFi camera starts flashing— the camera is trying to join your WiFi network. Once the WiFi camera has successfully connected to your WiFi network, you’ll see the Success screen in the App and the indicator light on the back of the camera will turn green. Congratulations—you’ve just set up your first camera! Congratulations! Camera successfully added! IMPORTANT: If this WiFi setup option doesn’t work, try the Add new camera with QR code option in the Add Camera screen. If the WiFi camera does not connect, follow the instructions in the App to troubleshoot. Getting Started Configure WiFi 1. Your camera should be plugged in and turned ON. Press the “Set” button on the bottom of your camera for 1 second.You will hear one beep and the LED will start blinking red. Getting Started Step 10: Choose the camera from the home screen Congratulations! You’ve just set up the camera for viewing on your smartphone. Now it’s time to set it up with the local monitor. Connection Troubleshooting ® + Make sure your phone or tablet is connected to the WiFi network you want to use. Sally’s nursery + Make sure the camera is getting a good signal from your WiFi router. See step 3 for more information. Device ID：1234567891234560 Sally’s nursery Device List Message My Center SD R E CO R D SNAPSHOT Swipe screen above to Pan/Tilt TALK Press the part of the home screen showing the camera you set up in order to choose this camera. The Camera View screen is your gateway to total control of your WiFi camera from virtually anywhere. Sally’s nursery 2016-1-28-12:000 HD Device ID：1234567891234560 SOUND ON The next chapter gives you a tour of the features available from this screen. + Test your WiFi network with other devices to make sure its working. + Double check that you’ve entered the correct password for your WiFi network in the Project Nursery App. + Make sure your router is broadcasting its SSID (name). The Project Nursery WiFi camera does not support hidden SSIDs. + Make sure that Wi-Fi signal is 2.4GHz. The Project Nursery WiFi camera does not support 5GHz WiFi. + Make sure that your WiFi router uses either WPA2-PSK/WPA-PSK or AES as its encryption method. + Make sure that there is no MAC filter on router or add MAC address to router whitelist. + Reset the camera to set up connection again. Press and hold SET key for 10 seconds. The camera gives a long beep when it is fully reset. Then press Password and use the on-screen keyboard to enter the password for this network. Press and hold the POWER button on the parent monitor to turn it on. myNetwork netwkpass1 CONNECT Step 12: Connect the monitor to your WiFi network WiFi Network Password CONNECT WELCOME! The first time you turn on the parent monitor, you’ll be asked to choose your WiFi network and enter its password. Press WiFi Network and choose your network from the list that appears. WiFi Network Home WiFi Sig_Guest Comcast_123 WELCOME! Once you’ve chosen your network and entered your password, press the CONNECT button to connect to it. The process of connecting the monitor and camera to your WiFi network might take several minutes to complete. 72º 10:30AM Once the monitor and camera have connected to your WiFi network, you should start seeing video from the camera on your monitor. IMPORTANT: Make sure you use the same WiFi network you used to set up the camera with the App! Getting Started Step 11: Turn on the monitor TOUR OF THE SYSTEM Parent Monitor Tour of the system turns the monitor on and off (press and hold for 1 second). turns the screen on and off. Press and hold for 2 seconds to switch cameras. and turn the volume down/up (you can also do this through the touchscreen). In menu screens, these navigate left/right. zooms the camera in and out (you can also do this through the touchscreen). This button also selects items in menu screens. Watching baby You can turn the display on and off without turning the monitor off (this can help extend battery life). You’ll still hear your baby, but the display will be asleep until you awaken it. To turn the display on or off: Press the VIDEO ON/ OFF button on the parent monitor. starts pan/tilt of the camera (you can also do this through the touchscreen). Use the arrows to pan and tilt once you’ve activated this function. This button also navigates up in menu screens. lets you talk through the camera’s speaker (you can also do this through the touchscreen). Press and hold while talking (release when you’re done). This button also navigates down in menu screens. SOUND LEVEL indicators show you the level of sound from your baby’s room. USB CHARGING jack (side panel, not shown) plugs into your charging cable to recharge or power the parent monitor. 10 Parent Monitor Touchscreen 10:30AM Almost all of the parent monitor’s features are accessible through its touchscreen. Just tap the screen to see icons for each feature. and turn the volume down/up. pan and tilt the camera. accesses the parent monitor’s menu system. Pan, Tilt, and Zoom To zoom the active camera: Touch the parent monitor’s touchscreen, then press . You can also press the OK-ZOOM button. To pan or tilt the active camera: Touch the parent monitor’s touchscreen, then press one of the arrow icons. You can also press the PAN/TILT button and use the arrow buttons. zooms in on the camera image. lets you talk through the camera’s speaker. Press and hold while talking. clears the icons from the screen. Listening to baby Talking to baby The SOUND LEVEL indicators on the parent monitor show you at a glance the sound level in your baby’s room, regardless of how loud the audio is on the parent monitor. To talk through the speaker on the active camera: Touch the parent monitor’s touchscreen, then press and hold . You can also press and hold the TALK button on the parent monitor. To increase or decrease the volume of the audio monitor: Press the VOL+ or VOL– buttons on the parent monitor. Talk normally to the parent monitor—your voice will come out on the camera’s speaker. Release the onscreen microphone icon when you’re done talking. 11 Tour of the system 72º App Camera View Screen Sally’s nursery 2016-1-28-12:000 (Settings) accesses the Settings menu for this camera. Press this icon to adjust the WiFi and other settings for this camera. Tour of the system Camera view shows you the image from your WiFi camera. Pan and tilt the camera by swiping on the screen left/right or up/down. Zoom the camera by double-tapping the screen. HD (Multi-Camera View) lets you see multiple cameras at once on a single screen (if you’ve set up multiple cameras). Press this icon to access the multi-camera view screen (phone App only). SD R E CO R D SNAPSHOT (HD-SD Select) lets you switch between high- and standarddefinition video on the view screen. HD SD Swipe screen above to Pan/Tilt TALK SOUND ON Pan, Tilt, and Zoom (Micro-SD Card) accesses any content stored on the camera’s MicroSD Card (not included). Press this icon to start viewing or downloading motion/sound-activated videos or images from the camera’s Micro-SD Card. (This is where you’ll see auto recordings.) (Record) starts/stops recording video. The video file is saved to your smartphone or tablet. R E CO R D To zoom the active camera: Double-tap the camera view screen. (Snapshot) takes a still photo of the camera video. The snapshot file is saved to your smartphone or tablet. SNAPSHOT To pan or tilt the active camera: Swipe the camera view screen left/ right or up/down. (Talk) lets you speak through this camera’s built-in speaker. Press and hold this icon to start speaking. TALK SOUND ON 12 (Sound On/Off) turns the sound from the camera on and off. Camera (bottom) Nighttime sensor adjusts the camera sensitivity to the amount of ambient light. Microphone picks up sound around the camera. Mounting keyholes let you mount the camera on a wall (mounting screws included). MICRO-SD slot (left side) holds the preinstalled micro-SD card for storage of automatic photos/ video. SET starts the WiFi setup process (press and hold). DUAL POWER button (right side) turns the camera on and off (press and hold). Camera (back) QR code passes the camera ID information to the App during the WiFi setup process. Adjustable antenna communicates wirelessly with your WiFi network. DC In jack plugs into your charging cable to power the camera. Indicator light shows the power and connection status of the camera: - off (camera not plugged in or powered on) - solid red (on but not connected - blinking red (in the process of connecting) - solid green (connected to network and App) - blinking green (camera being actively viewed on monitor or App). Thermal sensor detects the temperature around the camera. 13 Tour of the system Camera (front) 3. EVERYDAY USE You customize your Dual-Connect Baby Monitor System to best fit your needs and environment, including motion, sound, and temperature alerts that notify you automatically. Access these settings through the App on your phone/tablet or through the menu system on the parent monitor. This chapter takes you through the settings you can customize, one by one. Sally’s nursery 2016-1-28-12:000 Everyday use To access the App menu system: In the Camera View screen, press the (Settings) icon. Settings Motion detection HD Sound detection R E CO R D SNAPSHOT OFF OFF 20s 60s 90s Battery Life Auto-record time Swipe screen above to Pan/Tilt TALK SD SOUND ON Temperature alarm 72º 72º 10:30AM Whit N i 10:30AM To access the parent monitor menu system: Touch the screen. Then press the 14 icon. Cameras (Parent Monitor only) The Cameras menu on the parent monitor lets you change which camera you’re viewing (if you have multiple cameras set up). It also offers several options for scanning through the cameras automatically. 10:30AM 72º IN THE APP: If you have multiple cameras set up, you can view up to 4 at once on the App using the button in the camera view screen. ACCESSING CAMERAS ON THE PARENT MONITOR 10:30AM 72º View Cameras Scan Cameras 10:30AM 72º View Cameras 10 sces sces Scan Cameras 15 sces OFF Sound Activated Scan Touch the parent monitor’s screen. Then press the icon. Press the Cameras icon. To view a different camera: In the Cameras menu, press View Cameras. Then press the icon for the camera you want to view. The screen switches to that camera, and the status bar at the top of the screen indicates the camera you’re viewing: , , , or To scan through the cameras automatically: In the Cameras menu, press Scan Cameras. Select the scan option you want: switch every 5, 10, or 15 seconds, or sound-activated scan. The screen switches to the first camera, and the status bar at the top of the screen shows an indicator for scanning: , or . It also shows the camera you’re viewing Note: You must have Sound Activated Video alerts turned on for the Sound Activated Scan to work. See the next page for details. To stop scanning cameras: select Scan Cameras in the Cameras menu. Then select Off. 15 Everyday use Motion/Alerts The Dual Connect System lets you set up alerts that are activated by motion, sound, or temperature in your baby’s room. It also lets you set up an alert for when the monitor’s rechargeable battery needs to be recharged. You can set up these alerts through the parent monitor or through the App. 10:30AM 72º SETTING ALERTS ON THE PARENT MONITOR Everyday use 10:30AM 72º Motion Activated Video Sound Activated Video Temperature Alert Low Battery Alert Out of Range Alert Note about alert sensitivity: You might want to test different levels of sensitivity for motion, sound, and temperature alerts, to find the best fit for your environment and preference. 16 Touch the parent monitor’s screen. Then press the icon. Press the MOTION/ALERTS icon. Select the kind of alert you would like to set. Motion Activated Video automatically shows video when the active camera detects movement. It has three levels of sensitivity: Low, Medium, and High. Once you’ve selected the level of sensitivity you want, the status bar at the top of the screen shows an indicator for motion activation: When the active camera senses motion, this indicator flashes. Sound Activated Video automatically shows video when the active camera detects sound. It has two levels of sensitivity: Low and High. Once you’ve selected the level of sensitivity you want, the status bar at the top of the screen shows an indicator for sound activation: . When the active camera senses sound, this indicator flashes. Temperature Alert notifies you when your baby’s room is too hot or too cold. There are separate alerts for High and Low temperatures. Press the one you want to set, then use the + and – on-screen buttons to set the temperatures you want. Once you’ve set these up, the status bar at the top of the screen shows an indicator for temperature alerts: . Notes about notifications: If the temperature in your baby’s room goes beyond the limit(s) you set, the parent monitor displays an alert and the temperature alert indicator turns red in the status bar. + Motion, sound, and temperature alerts you set on the parent monitor will send notifications on the App as well (if you have App notifications turned on). + The App sends a maximum of 2 notifications every 4 minutes. It prioritizes notifications in the following order: temperature, sound, motion. Low Battery Alert tells you when the monitor needs to be recharged.. Once you’ve turned this alert on, the status bar at the top of the screen shows an indicator for low-battery alert: . Out of Range Alert tells you when the monitor is disconnected from or out of range of the camera (for example, if the camera’s lost power). Once you’ve turned this alert on, the status bar at the top of the screen shows an indicator for out-of-range alert: . Everyday use SETTING ALERTS ON THE APP Sally’s nursery 2016-1-28-12:000 Settings Motion detection HD Sound detection R E CO R D SNAPSHOT Swipe screen above to Pan/Tilt TALK OFF OFF 20s 60s 90s SD Battery Life Auto-record time SOUND ON Temperature alarm White Noise Music Share camera with friend Flip horizontally Flip vertically Camera time set Camera info Delete Camera In the Camera View screen, press the In the Settings menu, set the sensitivity of the alerts you want to set. (Settings) icon. Motion detection sends a notification on your phone when the camera detects movement. It has three levels of sensitivity: H (high), M (medium), and L (low). Sound detection sends a notification on your phone when the camera detects sound. It has two levels of sensitivity: H (high) and L (low). Battery life sends a push notification when the rechargeable battery in the WiFi camera gets to a certain level. Select Battery life, then press the switch next to Push Notifications for Camera Battery and choose when you would like to be sent notifications. 17 Auto-record time automatically records a certain amount of video when the camera detects a motion or sound alert.Select the amount of Auto-record time you want (in seconds) when a motion or sound alert is triggered: 20s, 60s, or 90s. IMPORTANT: You must keep the provided micro SD card in its slot on the camera to use this feature. Temperature alarm Temperature Alarm sends a push notification to your phone when your baby’s room is too hot or too cold. Select Temperature alarm, then press Edit at the top of the screen to change the settings. To change from degrees Fahrenheit to Celsius: Press the C. Everyday use To set a high temperature alert: Press the switch next to High temperature alert. Then set the temperature you want for the high temperature alert. To set a low temperature alert: Press the switch next to Low temperature alert. Then set the temperature you want for the high temperature alert. 18 Lullabies This Project Nursery system comes with 3 lullabies, 2 nature sounds, and white noise ready to play—simply choose the one you want, and the camera you’re on will play it back. NOTE: If there’s a lullaby currently playing on a camera, a green arrow icon appears next to it. Music White Noise "Jolene" Rain Waves Make sure the monitor is displaying the camera you want to play the lullaby on. If you want to play on a different camera, press the MENU button and select CAMERAS. Then select View Camera and choose the camera you want. Press the MENU button to access the main menu. Press the LULLABIES icon. Press the option you want to play. The status bar at the top of the screen shows an indicator for lullabies: . CONTROLLING LULLABIES FROM THE APP Music "I Don't Want to Miss a Thing" "Holiday" CONTROLLING LULLABIES FROM THE PARENT MONITOR To play a lullaby, nature sound, or white noise from the active camera: Press Music in the Setup menu. Then press the option you want to play. Note: Make sure you’re displaying the camera you want to play the lullaby on. If you want to play on a different camera, go back to the App’s home screen and choose that camera. White Noise 19 Everyday use 10:30AM 72º Sleep Mode (Parent Monitor only) You can set up the parent monitor to turn off the display automatically after a set amount of time. SETTING SLEEP MODE 10:30AM 72º Sleep Mode(video off audio only) 5mins 30mins 60mins OFF Everyday use Press MENU on the parent monitor. Press the Sleep Mode icon. In the Sleep Mode menu, press Sleep Mode (video off, audio only) to turn sleep mode on. Then select the delay before the display turns off automatically: 5, 30, or 60 minutes. (The audio from your camera will stay on even when the display is off.) Playing Back Pictures and Videos You can access the videos or pictures stored on the camera’s SD card from the parent monitor and from the App. IMPORTANT: You must keep the provided micro SD card in its slot on the camera to use this feature—this is where motion and soundactivated videos are stored. 20 10:30AM 72º 201600309002.jpg Photo 201600309003.jpg Video Press MENU on the parent monitor. Press the Play icon. Press the button for the kind of media you want to play back: Photo or Video. The screen displays a list of the photos or videos on the camera’s SD card. Press the name of the image or video you want to see on the display. Use the on-screen controls to stop, play/pause, and exit the screen. ACCESSING PICTURES/VIDEOS FROM THE APP Sally’s nursery 2016-1-28-12:000 Press Choose the photo or video you want to start playing. on the camera view screen in the App SD R E CO R D SNAPSHOT Swipe screen above to Pan/Tilt TALK SOUND ON 21 Everyday use 201600309011.jpg 201600309012.jpg HD ACCESSING PICTURES/VIDEOS FROM THE PARENT MONITOR Settings (Parent Menu only) The Settings menu lets you customize the monitor to match your preferences. It also gives you technical information about the monitor and support. 10:30AM 72º ACCESSING THE PARENT MONITOR’S SETTINGS MENU Everyday use 10:30AM 72º Wifi Set Adjust Brightness Auto Dimming Time Set Temperature Press MENU on the parent monitor. Press the Settings icon. Press the setting you’d like to adjust. (Press the arrow down at the bottom of the list if you don’t see the setting you want.) Wifi Set lets you enter the network name and password for your monitor and camera. IMPORTANT: This must be the same network you used to set up the camera through the App. If you want to change networks, delete the camara in the App and follow the setup instructions from the beginning with the new network. Adjust Brightness lets you adjust the level of brightness on the parent monitor. Press this option, then use the + and – on-screen buttons to set the level desired. Auto Dimming lets you adjust the amount of time of inactivity before the parent monitor dims its display brightness to conserve energy. Press this option, then select the amount of time desired: 5, 10, or 15 minutes. Time Set lets you adjust the time displayed on the parent monitor. Press this option, then use the up and down onscreen buttons to set the hours, minutes, and AM/PM. 22 Temperature lets you select how you’d like temperature to be displayed: in degrees Fahrenheit or Celsius. 10:30AM 72º French Language Select Language Select lets you select the language you want for the menu system on the parent monitor. English Factory Reset Support Support gives you information about the firmware version used in your monitor and camera. It also provides customer support information. Share camera with friend (App only) Share camera with friend You can share video with friends and family, so that they can see what’s happening with baby. These guest accounts have limited access to settings—they can view and talk through cameras and record pictures and videos directly to their phone. Steps to share with friend Decice List Add Camera Add new camera with WiFi Make sure the person you want to share with has downloaded the Project Nursery App on their phone/tablet. On your phone or tablet, go to the Settings menu and press Share camera with friend. Have the person you want to share with follow the steps shown. Add new camera with QR code Get shared camera from friend Step 1: Open App and click then “Add camera” button above in your friend’s mobile phone Step 2: Select the third option and scan the QR code above IMPORTANT: Your friend or family member will need to scan the QR code on the screen. If they are not physically present to do so, either print the screen or do a screenshot and send it to a phone they can scan with their phone. 23 Everyday use Factory Reset lets you return the parent monitor to the settings it had when you got it out of the box. If you’ve tried all of the troubleshooting solutions to solve a problem, and nothing seems to work, you might need to reset the monitor to its factory settings and start setup again. WARNING: Resetting to factory settings erases all of your custom settings. You will have to set up the monitor from scratch. Flip horizontally / vertically (App only) Flip horizontally Flip vertically Flip horizontally and vertically let you reverse the orientation of the Camera View video. Press the switches next to each to toggle these on and off. Camera time set (App only) Camera time set The camera time on the screen is from network. If you find the camera time is not the same with the mobile phone, please click the button below to synchronize time. The WiFi camera’s internal clock might need to be periodically syncronized with your phone’s clock. If you notice the two times don’t match, choose Camera time set in the App’s Settings menu, and press the Camera time sync button at the bottom of the page. The App will sync the current WiFi camera’s clock with your phone or tablet’s clock. Everyday use Camera info (App only) Camera info Device name Serial # IP Camera 215451516514 MAC address 442412314575756 Hardware version Software version The Device info screen gives you details about the current WiFi camera, including the amount of memory left on the micro-SD card if you have one installed. 20130101 BNHS5750101 Space capacity Use 3.0GB Available 2.0GB Delete Camera The Format SD card button at the bottom of the Camera info screen lets you format a micro-SD card before you use it for the first time. To format a micro-SD card: Insert the card into the WiFi camera’s micro-SD card slot. Then press the Format SD card button at the bottom of the Camera info page. Delete Camera (App only) If you’ve tried all of the troubleshooting solutions to solve a problem, and nothing seems to work, you might need to reset the WiFi camera and App to their factory settings and start setup again. WARNING: Delete camera erases all of your custom settings. You will have to set up the WiFi camera from scratch. 24 4. TROUBLESHOOTING / FAQS Most issues with the Project Nursery baby monitoring system can be solved by following one of the troubleshooting tips below. For additional assistance, please call 1-844-393-7338. WiFi Issues I can’t connect the WiFi camera to my network. + Make sure your phone or tablet is connected to the WiFi network you want to use. + Make sure the camera is getting a good signal from your WiFi router. See page xx for more information. + Make sure that Wi-Fi signal is 2.4GHz. The Project Nursery WiFi camera does not support 5GHz WiFi. + Make sure that your WiFi router uses either WPA2-PSK/WPA-PSK or AES as its encryption method. + Make sure that there is no MAC filter on router or add MAC address to router whitelist. + Reset the camera to set up connection again. Press and hold SET key for 10 seconds. The camera will give a long beep when it is fully reset. The WiFi camera’s indicator light remains red (connection to network failed). + Double check that you’ve entered the correct password for your WiFi network in the Project Nursery App. + Test your WiFi network with other devices to make sure its working. Troubleshooting + Make sure the camera is getting a good signal from your WiFi router. See page xx for more information. + Make sure that Wi-Fi signal is 2.4GHz. The Project Nursery WiFi camera does not support 5GHz WiFi. + Make sure that your WiFi router uses either WPA2-PSK/WPA-PSK or AES as its encryption method. Camera Issues The WiFi camera’s indicator light flashes green. + The camera is being actively viewed. 25 I don’t see video from the camera on my phone/tablet. + Make sure the camera is turned on and that it has enough charge or is plugged in to a working outlet. + Make sure the camera is within range of your WiFi router (certain kinds of signal obstacles, like large metal objects, might shorten the range somewhat). + Make sure your phone/tablet has an active data or WiFi connection and that the Project Nursery App is open and configured with the camera. I can’t record video or pictures on the camera (for motion or sound alerts). + Make sure you have an Micro SD card (included) inserted in the MICRO SD card slot on the side of the camera. + Make sure auto-record is set to on and a motion or sound alert is set. App Issues I can’t record video or pictures on my phone/tablet. + Make sure your phone/tablet has enough available memory to record video or pictures. My video feed is frozen. + Check the time stamp on the video feed screen to make sure the video is frozen. Then return to the camera home screen and reload that camera again. + Close the app and re-open. Troubleshooting I can’t pan/tilt the camera from my phone or tablet. + Make sure you’re swiping on the video from the camera on your phone or tablet. Pan and tilt the camera by swiping on the screen left/right or up/down. Zoom the camera by double-tapping the screen. + Make sure the camera is moving freely. In certain positions, the camera might bump into the stand neck. If the neck is in the way, pan or tilt the camera in the other direction so that you have a free range of movement. The App is frozen. + Force close the App on your phone or tablet. Then re-open it. 26 I can’t hear sounds from baby’s room. + Make sure the volume on your phone or tablet is turned up. + Make sure sound is turned on in the Camera view screen. + Make sure the microphone on the camera is not blocked. The microphone is just below the lens. The lullabies/sounds aren’t playing. + If you have multiple cameras, make sure you’ve chosen the one you want the lullabies to play on before you start the lullaby. Go to the Home screen and choose the camera you want. Then go to Settings, then Music and select an option to play. The temperature alerts don’t work. + Make sure you’ve set the temperature preference to the system you use, Fahrenheit (standard in the US) or Celsius (standard outside the US). To switch your temperature preference, go to Settings > Temperature alarm. + Make sure you’ve set the right kind of temperature alert—for example, if you want to make sure your baby’s room does not get below 68 degrees Fahrenheit, set the Low Temperature Alert to 68. If you want to make sure your baby’s room doesn’t get above a certain temperature, set the High Temperature Alert to that temperature. + You might need to adjust the sensitivity of the alerts—for example, if Motion detection is set to Low, the monitor will not come on as often as when Motion detection is set to Medium or High. To adjust this setting, go to Settings > Motion detection. + If you have multiple cameras, you might need to set an alert for the camera you’re using—motion alerts need to be set separately for each camera. + The App gives a maximum of 2 notifications every 4 minutes. Sound alerts don’t work. + You might need to adjust the sensitivity of the alerts—for example, if Sound detection is set to Low, the monitor will not come on as often as when Sound detection is set to High. To adjust this setting, go to Settings > Sound detection. + If you have multiple cameras, you might need to set an alert for the camera you’re using—sound alerts need to be set separately for each camera. + The App gives a maximum of 2 notifications every 4 minutes. 27 Troubleshooting Motion alerts don’t work. I’d like to stop sharing the camera view with a friend/family member. + Go to the Settings menu in the Project Nursery App on your phone/tablet and select Delete camera at the bottom of the menu. This will stop all sharing, but you’ll need to set up the camera again on your phone. I’d like to give someone full access to my camera (including settings). + Guess accounts have limited access to settings. If you want to give someone full access, you will need to give them your account log-in info and password (not recommended!). I can’t access the camera from my computer. + The Project Nursery WiFi camera works with the Project Nursery App on iOS and Android devices only. It does not support computers or other mobile device operating systems. I can’t open the App on my Android tablet. + The Project Nursery App is not compatible with some makes and models of Android tablets. Contact our customer service at 1-844-393-7338 to see if your Android tablet is compatible with the Project Nursery App. Parent Monitor Issues I don’t see video from the camera on my monitor. + Make sure your monitor is turned on (press the Power button). If it is, press the VIDEO ON/OFF button (VIDEO on the mini monitor) to make sure the monitor’s display is awake. Make sure the camera is plugged in to a working outlet and turned on. I see the icon on the screen. Troubleshooting + Make sure the camera you’re trying to view is plugged in to a working outlet and turned on. + Make sure the monitor is on the same WiFi network as the camera was set up on in the App. I can’t record video or pictures. + Make sure you have an Micro SD card (included) inserted in the MICRO SD card slot on the side of the camera. I can’t pan/tilt the camera from my monitor. + Make sure you’re in pan mode—press and hold OK/ZOOM until you see arrows on the monitor display. Then use the arrows or joystick to pan the camera. + Make sure you’re not zoomed in on the image—press OK/ZOOM to zoom out if you are. Then press and hold OK/ZOOM to enter pan mode. 28 + Make sure the camera is moving freely. In certain positions, the camera might bump into stand neck. If the neck is in the way, pan or tilt the camera in the other direction so that you have a free range of movement. I can’t hear sounds from baby’s room. + Make sure the monitor is turned up. Press the VOL+ button until you hear sounds from your baby’s room. + Make sure the microphone on the camera is not blocked. The microphone is just above the lens. The lullabies aren’t playing. + If you have multiple cameras, make sure you’ve chosen the one you want the lullabies to play on before you start the lullaby. Go to Cameras > Select Camera and choose the camera you want. Then go to Lullabies and select an option to play. The temperature alerts don’t work. + Make sure you’ve set the temperature preference to the system you use, Fahrenheit (standard in the US) or Celsius (standard outside the US). To switch your temperature preference, go to Settings > Temperature. + Make sure you’ve set the right kind of temperature alert—for example, if you want to make sure your baby’s room does not get below 68 degrees Fahrenheit, set the Low Temp Temperature Alert to 68. If you want to make sure your baby’s room doesn’t get above a certain temperature, set the High Temp Temperature Alert to that temperature. + You might need to adjust the sensitivity of the alerts—for example, if Motion Activated Video is set to ON: Low, the monitor will not come on as often as when Motion Activated Video is set to ON: Medium or ON: High. To adjust this setting, go to Motion/Alerts > Motion Activated Video. + If you have multiple cameras, you might need to change the active camera—motion alerts work for the active camera only. Press VIDEO ON/OFF (VIDEO on the mini monitor) to make sure the camera you want to use for motion alerts—the one with the clearest view of your baby, for example—is the one displayed. Sound alerts don’t work. + You might need to adjust the sensitivity of the alerts—for example, if Sound Activated Video is set to ON: Low, the monitor will not come on as often as when Sound Activated Video is set to ON: Medium or ON: High. To adjust this setting, go to Motion/Alerts > Sound Activated Video. + If you have multiple cameras, you might need to change the active camera—sound alerts work for the active camera only. Press VIDEO ON/OFF (VIDEO on the mini monitor) to make sure the camera you want to use for sound alerts—the one closest to your baby, for example—is the one displayed. 29 Troubleshooting Motion alerts don’t work. ©2017 Voxx Accessories Corp. 3502 Woodview Trace, Suite 220 Indianapolis, IN 46268 PNMDUAL5 IB 00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Create Date : 2017:07:07 11:24:33+08:00 Creator : Adobe InDesign CC 2017 (Macintosh) Modify Date : 2017:07:07 11:24:33+08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2017:06:08 16:46:40-04:00 Creator Tool : Adobe InDesign CC 2017 (Macintosh) Instance ID : uuid:87c02932-43a3-47cb-83a7-4944218d3aa3 Original Document ID : xmp.did:790b84c2-067f-4425-9d3b-ebcb3d211966 Document ID : xmp.id:02b72285-8316-43fb-9559-b18e4321f192 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:5fb768b4-b188-487c-9a2e-3d73da3d15a6 Derived From Document ID : xmp.did:2281948a-c3a3-437d-aefa-acb02a3083c3 Derived From Original Document ID: xmp.did:790b84c2-067f-4425-9d3b-ebcb3d211966 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Macintosh) History Changed : / History When : 2017:06:08 16:46:25-04:00 Format : application/pdf Title : untitled Producer : Acrobat Distiller 10.1.0 (Windows) Trapped : False Page Count : 30EXIF Metadata provided by EXIF.tools