Voxx Accessories SP446 WIRELESS SPEAKER User Manual 1

Voxx Accessories Corp. WIRELESS SPEAKER Users Manual 1

Contents

Users Manual-1

Instructions en français ..............................11 Instrucciones en español ........................... 21WIRELESS SPEAKERSWelcome to Canz H2O!These speakers oer two setup options:Single-Speaker setup for using each speaker separatelyStereo setup for using both speakers togetherThis guide takes you through the steps for either setup option.
2Make sure the following items came in this package:• (2) H2O speakers • (2) USB charging cables UnpackThe best little speakers to go anywhere: waterproof up to 3ft, and tested to withstand full submersion for up to 30 minutes! They even float if they fall in the water! Of course, we don’t recommend leaving the Canz H2O in or under water for extended periods of time—but a little bit won’t do any harm! Just make sure the back flap covering the USB jack is sealed.Welcome to Canz H2O!
3Speaker backCharge the speakersthe included USB cables into the jack behind this flap. Plug the other end of the USB charging cable into a power source, like a computer or a USB charging adapter. IMPORTANT: Make sure this flap is closed if the speaker is going to get wet.Before you start using these speakers for the first time, it’s a good idea to charge them completely. To charge each speaker: Open the CHARGING DC IN flap on the back of the speaker. Plug one of Flap open
4Speaker frontPress and hold the button on front of each speaker to turn it on. The power up tone sounds and the button starts blinking white on each speaker.1. Turn both speakers onStereo Setup (both speakers together)Wait for the speakers to announce “Left connected” and “Right connected.” Right speakerSolid whiteLeft speakerBlinking whiteThe button on the right speaker turns solid white (it keeps blinking on the left speaker).
5Enable Bluetooth on your smartphone or other device (if it isn’t already on). Make sure the button on the front of the left speaker is blinking rapidly. (If it isn’t, give a short double-press on the button. The speaker gives an audio signal.)Choose CANZ H2O ST from the pairing options on your smartphone. (If it’s not in the list, choose “Scan” from your phone’s Bluetooth menu.)2. Pair and connect to your phoneThis means the two speakers are linked for stereo and ready to pair with your Bluetooth device.
6The speaker gives an audio signal when it’s finished pairing and connecting to your smartphone. The button turns solid white.Note: The process of enabling Bluetooth and connecting varies from device to device. See your device’s owners manual for more information and specific instructions.3. Play musicSet your device’s volume for music to 75%. Start playing music or other audio on your device. Within seconds, the speaker starts streaming the audio wirelessly via Bluetooth.To adjust the volume of your audio: Use the volume controls on your phone.Stereo Setup (continued)
7If you’ve previously paired your phone or other Bluetooth device with this speaker, the speaker will automatically attempt to reconnect to that device when you switch the speaker on. If you want to pair to a new device, give a short double-press to the button. The speaker gives a signal and the button starts blinking.Bluetooth Wireless Connection Tips• Make sure the Bluetooth capability of your device is turned on.• The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re having problems connecting to this speaker, move closer to it. • If your device asks you for a password to connect, use “0000”.To play/pause: If you’re playing music via Bluetooth, press once on the speaker’s button.
8Single Setup (each speaker separately)Speaker frontPress and hold the button on front of one speaker to turn it on. Don’t turn the other speaker on yet!The power up tone sounds and the button starts blinking white on this speaker, then starts blinking blue.1. Turn one speaker onBlinking blue
92. Pair and connect to your phone.Enable Bluetooth on your smartphone or other device (if it isn’t already on). Make sure the button on the front of the speaker is blinking blue rapidly. (If it isn’t, give a short double-press on the button. The speaker gives an audio signal.)Choose CANZ H2O ST from the pairing options on your smartphone. (If it’s not in the list, choose “Scan” from your phone’s Bluetooth menu.)The speaker gives an audio signal when it’s finished pairing and connecting to your smartphone. The button turns solid blue.
10Single Setup (continued)Note: The process of enabling Bluetooth and connecting varies from device to device. See your device’s owners manual for more information and specific instructions.See the Bluetooth Wireless Connection Tips section on page xx for info and troubleshooting.3. Play musicSet your device’s volume for music to 75%. Start playing music or other audio on your device. Within seconds, the speaker starts streaming the audio wirelessly via Bluetooth.To adjust the volume of your audio: Use the volume controls on your phone.To play/pause: If you’re playing music via Bluetooth, press once on the speaker’s button.
11Tour of the speakerFront button turns the speaker on/o (press and hold), puts the speaker into pairing mode (double press), and plays/pauses playback when audio is playing via Bluetooth. It also shows the Bluetooth status of the speaker: If you’re using the Single-Speaker Setup: Solid blue means the speaker is connected via Bluetooth. Fast blinking blue means the speaker is ready to pair via Bluetooth. Mounting the Canz H2OThe Canz H2O has a standard 1/4”-20 mount on its side, compatible with any accessory oering this connection (like some tripods and bike mounts).
12Slow blinking blue means the speaker is reconnecting via Bluetooth.If you’re using the Stereo Setup (2 Speakers): Solid white means the right speaker is linked for stereo sound. Slow blinking white means the two speakers are trying to link for stereo sound. Fast blinking white (left speaker only) means this speaker is ready to pair via Bluetooth.Back (behind the flap)Charging jack connects to the provided USB charging cable to plug the speaker into a power source or adapter.Charging indicator shows the charging status of the speaker: • solid red while charging• solid green when charged

Navigation menu