Voxx Accessories SP446 WIRELESS SPEAKER User Manual 1

Voxx Accessories Corp. WIRELESS SPEAKER Users Manual 1

Contents

Users Manual-1

Instructions en français ..............................11
Instrucciones en español ........................... 21
WIRELESS SPEAKERS
Welcome to Canz H2O!
These speakers oer two setup options:
Single-Speaker setup for using
each speaker separately
Stereo setup for using both
speakers together
This guide takes you through the steps for
either setup option.
2
Make sure the following items came in this
package:
• (2) H2O speakers • (2) USB charging cables
Unpack
The best little speakers to go anywhere:
waterproof up to 3ft, and tested to withstand
full submersion for up to 30 minutes! They
even float if they fall in the water! Of course,
we don’t recommend leaving the Canz H2O in or
under water for extended periods of time—but a
little bit won’t do any harm! Just make sure the
back flap covering the USB jack is sealed.
Welcome to Canz H2O!
3
Speaker back
Charge the speakers
the included USB cables into
the jack behind this flap.
Plug the other end of the
USB charging cable into
a power source, like a
computer or a USB charging
adapter.
IMPORTANT: Make sure this
flap is closed if the speaker
is going to get wet.
Before you start using these speakers for the
first time, it’s a good idea to charge them
completely.
To charge each speaker: Open the CHARGING DC
IN flap on the back of the speaker. Plug one of
Flap open
4
Speaker
front
Press and hold the button
on front of each speaker to
turn it on. The power up tone
sounds and the button
starts blinking white on each
speaker.
1. Turn both speakers on
Stereo Setup (both speakers together)
Wait for the speakers to announce “Left
connected” and “Right connected.”
Right speaker
Solid white
Left speaker
Blinking white
The button on
the right speaker
turns solid white (it
keeps blinking on
the left speaker).
5
Enable Bluetooth on your smartphone or other
device (if it isn’t already on).
Make sure the button on the front of the
left speaker is blinking rapidly. (If it isn’t, give
a short double-press on the button. The
speaker gives an audio signal.)
Choose CANZ H2O ST from the pairing options
on your smartphone. (If it’s not in the list,
choose “Scan” from your phone’s Bluetooth
menu.)
2. Pair and connect to your phone
This means the two speakers are linked for
stereo and ready to pair with your Bluetooth
device.
6
The speaker gives an audio signal when
it’s finished pairing and connecting to your
smartphone. The button turns solid white.
Note: The process of enabling Bluetooth and
connecting varies from device to device. See your
device’s owners manual for more information and
specific instructions.
3. Play music
Set your device’s volume for music to 75%.
Start playing music or other audio on your
device. Within seconds, the speaker starts
streaming the audio wirelessly via Bluetooth.
To adjust the volume of your audio: Use the
volume controls on your phone.
Stereo Setup (continued)
7
If you’ve previously paired your phone or other
Bluetooth device with this speaker, the speaker will
automatically attempt to reconnect to that device
when you switch the speaker on. If you want to pair
to a new device, give a short double-press to the
button. The speaker gives a signal and the button
starts blinking.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is
turned on.
• The Bluetooth wireless connection works up to a range of
roughly 33 feet (10 meters). This range may vary, however,
based on other factors, such as room layout, wall
material, obstacles, your device’s Bluetooth performance,
etc. If you’re having problems connecting to this speaker,
move closer to it.
• If your device asks you for a password to connect, use
“0000”.
To play/pause: If you’re playing music via
Bluetooth, press once on the speaker’s button.
8
Single Setup (each speaker separately)
Speaker
front
Press and hold the button
on front of one speaker to
turn it on. Don’t turn the
other speaker on yet!
The power up tone sounds
and the button starts
blinking white on this
speaker, then starts blinking
blue.
1. Turn one speaker on
Blinking blue
9
2. Pair and connect to your phone.
Enable Bluetooth on your smartphone or other
device (if it isn’t already on).
Make sure the button on the front of the
speaker is blinking blue rapidly. (If it isn’t, give
a short double-press on the button. The
speaker gives an audio signal.)
Choose CANZ H2O ST from the pairing options
on your smartphone. (If it’s not in the list,
choose “Scan” from your phone’s Bluetooth
menu.)
The speaker gives an audio signal when
it’s finished pairing and connecting to your
smartphone. The button turns solid blue.
10
Single Setup (continued)
Note: The process of enabling Bluetooth and
connecting varies from device to device. See your
device’s owners manual for more information and
specific instructions.
See the Bluetooth Wireless Connection Tips section on
page xx for info and troubleshooting.
3. Play music
Set your device’s volume for music to 75%.
Start playing music or other audio on your
device. Within seconds, the speaker starts
streaming the audio wirelessly via Bluetooth.
To adjust the volume of your audio: Use the
volume controls on your phone.
To play/pause: If you’re playing music via
Bluetooth, press once on the speaker’s button.
11
Tour of the speaker
Front
button turns the speaker on/o (press
and hold), puts the speaker into pairing mode
(double press), and plays/pauses playback when
audio is playing via Bluetooth. It also shows the
Bluetooth status of the speaker:
If you’re using the Single-Speaker Setup:
Solid blue means the speaker is connected
via Bluetooth.
Fast blinking blue means the speaker is
ready to pair via Bluetooth.
Mounting the Canz H2O
The Canz H2O has a standard 1/4”-20 mount on its
side, compatible with any accessory oering this
connection (like some tripods and bike mounts).
12
Slow blinking blue means the speaker is
reconnecting via Bluetooth.
If you’re using the Stereo Setup (2 Speakers):
Solid white means the right speaker is linked
for stereo sound.
Slow blinking white means the two speakers
are trying to link for stereo sound.
Fast blinking white (left speaker only) means
this speaker is ready to pair via Bluetooth.
Back (behind the flap)
Charging jack connects to the provided USB
charging cable to plug the speaker into a power
source or adapter.
Charging indicator shows the charging status
of the speaker:
• solid red while charging
• solid green when charged

Navigation menu