Voxx Electronics DEI474S Sidewinder Transmitter User Manual 473 474S 11 02 Blister Packs
DEI Headquarters, Inc. Sidewinder Transmitter 473 474S 11 02 Blister Packs
manual
473_474S 11-02 Blister Packs.qxd 1/16/2003 8:39 AM Page 2 REPLACEMENT TRANSMITTER Model 474S, 4 Button HF, Stealth Code Remote The following Learn Routine can be used to program this replacement transmitter to the system. In order to 1. 2. 3. REPLACEMENT TRANSMITTER Door. Open a door (except 3200HS). Key. Turn the key to the ON position. Choose. Within 5 seconds press and release the Valet/Program button the number of times corresponding to the desired channel listed below. Once you have selected the channel, press the Valet/Program button once more and hold it. The LED will flash the same number of times as the channel selected and the siren (except 3200HS) enter the Learn Routine, the system’s Valet/Program switch must be plugged into the BLUE port. 4. 5. will chirp to confirm the selected channel. Do NOT release the button. Transmit. While holding the Valet/program button, press the button from the transmitter you wish to assign to that channel. The unit will chirp (except 3200HS) to confirm that the transmitter has been taught to the receiver Release. Once the code is learned you can release the Valet/Program button and remove the key. Model 474S, 4–Button HF, Stealth Code Remote Channel Number SYSTEM Date Code 3200HS All 5200XS All Function Auto-learn Standard Configuration/Expanded (3300HS) Auto-learn Single-Button Configuration Delete All Transmitters Standard Configuration FCC/ID Notice A remote that has been programmed to an standard configuration will use separate buttons for arm and disarm similar to a factory keyless entry. Using the expanded configuration, the transmitter buttons are assigned to the following functions: This device complies with Part 15 of FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Lock Icon Button CAUTION! Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. The lock icon button arms and locks the system. Unlock Icon Button The unlock icon button disarms and unlocks the system. AUX Icon Buttons The AUX icon button operates channel 2. Siren Icon Button The siren icon button operates Panic only. Unlock and Lock Icon Buttons When pressed together, the lock and unlock icon buttons operate channel 3. P/N 474S MADE IN TAIWAN © 2002 Directed Electronics, Inc. Vista CA 92083 All rights reserved. 11/02 473_474S 11-02 Blister Packs.qxd 1/16/2003 8:39 AM Page 4 REPLACEMENT TRANSMITTER Model 473S, 3 Button HF, Stealth Code Remote REPLACEMENT TRANSMITTER The following Learn Routine can be used to program this replacement transmitter to the system. In order to enter the Learn Routine, the system’s Valet/Program switch must be plugged into the BLUE port. 1. 2. 3. 4. Door. Open a door. Key. Turn the key to the ON position. Choose. Within 5 seconds press and release the Valet/Program button the number of times corresponding to the desired channel listed below. Once you have selected the channel, press the Valet/Program button once more and hold it. The LED will flash the same number of times as the channel selected and the siren will chirp to confirm Model 473S, 3–Button HF, Stealth Code Remote Channel Number SYSTEM Date Code 3300HS All 5. the selected channel. Do NOT release the button. Transmit. While holding the Valet/program button, press the button from the transmitter you wish to assign to that channel. The unit will chirp to confirm that the transmitter has been taught to the receiver Release. Once the code is learned you can release the Valet/Program button and remove the key. Function Auto-learn Single-Button Configuration Delete All Transmitters Single-Button Configuration A remote that has been programmed to a single-button configuration will control both arm/lock and disarm/unlock from the same button. Using the one-button configuration, the transmitter buttons are assigned to the following functions: Lock/Unlock Icon Button The lock/unlock icon button arms/locks and disarms/unlocks the system. FCC/ID Notice This device complies with Part 15 of FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION! Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. AUX Icon Button The AUX icon button operates Channel 2 and silent arm/lock and disarm/unlock. Siren Icon Button The siren icon button operates Panic only. Lock/Unlock and AUX Icon Buttons When pressed simutaneously, the lock/unlock and AUX icon buttons activate Channel 3. P/N 473S MADE IN TAIWAN © 2002 Directed Electronics, Inc. Vista CA 92083 All rights reserved. 11/02
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2003:01:16 16:39:30Z Modify Date : 2003:01:16 08:40:15-08:00 Page Count : 3 Creation Date : 2003:01:16 16:39:30Z Mod Date : 2003:01:16 08:40:15-08:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : Summer Metadata Date : 2003:01:16 08:40:15-08:00 Creator : Summer Title : 473_474S 11-02 Blister Packs.qxdEXIF Metadata provided by EXIF.tools