Voxx Electronics DEI7113 433.92MHz ASK HHU User Manual

DEI Headquarters, Inc. 433.92MHz ASK HHU

user manual

MODEL7111ACompatible with the following systems.Automate AM6Automate AM6.2Replacement Transmitter
©2010 Directed Electronics, Vista, CA 92081. All rights reserved.REPLACEMENT TRANSMITTERModel 7111A 1-button Remote ControlTo enter Remote Control learn routine:1. Turn the key to the On position. 2. Within 10 seconds, press and release the Program button the number of times that corresponds to the selected channel listed below. After you select the channel, press the Program button once more and Hold it. The LED on the main unit flashes the number of times as the selected channel, and the horn (if connected) honks the same number of times as confirmation. Do NOT release the Program button. 3. While holding the Program button press the button on the Remote. The horn (if connected) sounds to confirm the Remote has been taught to the receiver.4. Release the Program button and remove the key.Standard configurationTo Remote Start the vehicle• Press and release the Remote button for 1-sec-ond. The parking lights turn on to confirm Remote Start operation.To shutdown Remote Start• PressandholdtheRemotebuttonfor3-seconds.Car finder (Remote Start must not be active)• PressandholdtheRemotebuttonfor3-seconds.The parking lights flash for about 10 seconds. To unlock the doors (Remote Start must be active)• Press and release the Remote button for 1-sec-ond. Refer to Owner's Guide for more details. FCC/ID NoticeThis device complies with Part 15 of FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.This device complies with Industry Canada license-exempt RSS standarad (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAUTION! Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux condi-tions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.The following Learn Routine can be used to program this replacement transmitter to the system. Channel Number Function1 Auto learn2 (4113A)8 (4101A)Delete all transmittersP/N 7111A 04/10MADE IN CHINALogo, Directed Electronics w-driven.eps Logo, Directed with designed in USA.eps Logo, Directed with Distributed By.eps Directed Logo Usage

Navigation menu