Voxx Electronics DEI7113 433.92MHz ASK HHU User Manual

DEI Headquarters, Inc. 433.92MHz ASK HHU

user manual

MODEL
7111A
Compatible with the
following systems.
Automate AM6
Automate AM6.2
Replacement Transmitter
©2010 Directed Electronics, Vista, CA 92081. All rights reserved.
REPLACEMENT TRANSMITTER
Model 7111A 1-button Remote Control
To enter Remote Control learn routine:
1. Turn the key to the On position.
2. Within 10 seconds, press and release the Program
button the number of times that corresponds to the
selected channel listed below.
After you select the channel, press the Program
button once more and Hold it.
The LED on the main unit flashes the number of
times as the selected channel, and the horn (if
connected) honks the same number of times as
confirmation. Do NOT release the Program
button.
3. While holding the Program button press the button
on the Remote. The horn (if connected) sounds
to confirm the Remote has been taught to the
receiver.
4. Release the Program button and remove the key.
Standard configuration
To Remote Start the vehicle
• Press and release the Remote button for 1-sec-
ond. The parking lights turn on to confirm Remote
Start operation.
To shutdown Remote Start
• PressandholdtheRemotebuttonfor3-seconds.
Car finder (Remote Start must not be active)
• PressandholdtheRemotebuttonfor3-seconds.
The parking lights flash for about 10 seconds.
To unlock the doors (Remote Start must be active)
• Press and release the Remote button for 1-sec-
ond.
Refer to Owner's Guide for more details.
FCC/ID Notice
This device complies with Part 15 of FCC rules.
Operation is subject to the following conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.
This device complies with Industry Canada license-
exempt RSS standarad (s). Operation is subject to the
following two conditions: (1) this device may not cause
interference, and (2) this device must accept any
interference, including interference that may cause
undesired operation of the device.
CAUTION! Changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate this device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux condi-
tions suivantes : (1) l'appareil ne doit pas produire
de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le
fonctionnement.
The following Learn Routine can be used to program this replacement transmitter to the system.
Channel Number Function
1 Auto learn
2 (4113A)
8 (4101A)
Delete all transmitters
P/N 7111A 04/10
MADE IN CHINA
Logo, Directed Electronics w-driven.eps
Logo, Directed with designed in USA.eps
Logo, Directed with Distributed By.eps
Directed Logo Usage

Navigation menu