Voxx Electronics DEI7752 Hand Held Security/Remote Control Transceiver User Manual page 1 to 20
DEI Headquarters, Inc. Hand Held Security/Remote Control Transceiver page 1 to 20
Contents
- 1. user manual page 1 to 20
- 2. user manual pages 1 to 20
- 3. user manual page 21
- 4. user manual pages 22 to 30
- 5. user manual page 31 to 54
user manual page 1 to 20
Model ???? Security and Remote Start Ownerâs Guide Š 2008 Directed Electronics, Vista, CA G5902V 2008-03 Contents Government regulations......................................................................................5 Warning! safety first...........................................................................................7 What is included................................................................................................9 Important information.........................................................................................9 Your warranty...........................................................................................9 Replacement remotes...............................................................................10 Caution..................................................................................................10 Responder LC 2-Way........................................................................................11 Responder LC 1-way.........................................................................................12 Transmitter configuration...........................................................................13 System maintenance ...............................................................................19 Charging the Battery................................................................................19 Low battery indicator...............................................................................20 Battery Replacement.................................................................................20 LCD Iayout..............................................................................................21 LCD remote features.................................................................................21 Multi-car control capability . .....................................................................22 Using the system..............................................................................................23 Arming the system...................................................................................23 While the system is armed........................................................................24 Modified Arming Modes..........................................................................26 Disarming the System...............................................................................28 System override.......................................................................................28 Using the remote start.......................................................................................30 Before using your Remote Start..................................................................30 Remote starting your vehicle......................................................................30 Points to remember..................................................................................30 Runtime Check........................................................................................31 Manual transmission................................................................................31 Timer mode.............................................................................................32 Turbo timer mode.....................................................................................32 Safety features ................................................................................................35 Starter anti-grind circuitry..........................................................................35 Disabling the remote start system...............................................................35 Diagnostics.....................................................................................................36 Arming ..................................................................................................36 Disarming ..............................................................................................37 System status chirps ................................................................................37 Table of zones.........................................................................................38 Interpreting zone diagnostics.....................................................................38 Nuisance preventionÂŽ circuitry.................................................................39 Owner recognition .............................................................................................................. 40 Rapid resume logic...........................................................................................40 Power saver mode...........................................................................................41 System...................................................................................................41 2-way remote..........................................................................................41 Programming options........................................................................................42 Security & convenience expansions....................................................................44 Glossary of terms.............................................................................................46 Quick reference guide......................................................................................49 Limited lifetime consumer warranty.....................................................................51 Government regulations This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: ⢠Reorient or relocate the receiving antenna. ⢠Increase the separation between the equipment and receiver. ⢠Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ⢠Consult the dealer or an experienced radio / TV technician for help. To satisfy FCC RF exposure compliance requirements, this device should be used in hand-held, hand operated configurations only. The device and its antenna must maintain a separation distance of 20 cm or more from the personâs body, except for the hand and wrists, to satisfy RF exposure compliance. This device is designed to be used in a personâs hands and its operating configurations do not support normal transmissions while it is carried in pockets or holsters next to a personsâ body. This device complies with the Industry Canada Radio Standards Specification Š 2008 Directed Electronics. All rights reserved. RSS 210. Its use is authorized only on a no-interference, no-protection basis; in other words, this device must not be used if it is determined that it causes harmful interference to services authorized by IC. In addition, the user of this device must accept any radio interference that may be received, even if this interference could affect the operation of the device. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the userâs authority to operate this device. Š 2008 Directed Electronics. All rights reserved. Warning! safety first The following safety warnings must be observed at all times: Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. When properly installed, this system can start the vehicle via a command signal from the remote control transmitter. Therefore, never operate the system in an enclosed area or partially enclosed area without ventilation (such as a garage). When parking in an enclosed or partially enclosed area or when having the vehicle serviced, the remote start system must be disabled using the installed toggle switch. It is the userâs sole responsibility to properly handle and keep out of reach from children all remote control transmitters to assure that the system does not unintentionally remote start the vehicle. THE USER MUST INSTALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STORAGE AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the sole responsibility of the user. Remote starters on manual transmission vehicles operate differently than those with automatic transmission because you must leave your car in neutral. You must read this Ownerâs Guide to familiarize yourself with the proper procedures regarding manual transmission remote starters. If you have any questions, ask your installer or contact Directed at 1-800-753-0600. Before remote starting a manual transmission vehicle, be sure to: ⢠Leave the vehicle in neutral and be sure no one is standing in front or behind the vehicle. ⢠Only remote start on a flat surface ⢠Have the parking brake fully engaged Š 2008 Directed Electronics. All rights reserved. WARNING! It is the responsibility of the owner to ensure the parking/ emergency brake properly functions. Failure to do so can result in personal injury or property damage. We recommend the owner have the parking / emergency brake system inspected and adjusted by a qualified automotive shop bi-annually. Use of this product in a manner contrary to its intended mode of operation may result in property damage, personal injury, or death. (1) Never remotely start the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. The user must also have the neutral safety feature of the vehicle periodically checked, wherein the vehicle must not remotely start while the car is in gear. This testing should be performed by an authorized Directed dealer in accordance with the Safety Check outlined in the product installation guide. If the vehicle starts in gear, cease remote start operation immediately and consult with the authorized Directed dealer to fix the problem. After the remote start module has been installed, contact your authorized dealer to have him or her test the remote start module by performing the Safety Check outlined in the product installation guide. If the vehicle starts when performing the Neutral Safety Shutdown Circuit test, the remote start unit has not been properly installed. The remote start module must be removed or the installer must properly reinstall the remote start system so that the vehicle does not start in gear. All installations must be performed by an authorized Directed dealer. OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS. Š 2008 Directed Electronics. All rights reserved. What is included ⢠⢠⢠⢠⢠⢠⢠⢠The control module with Stingerâ˘DoubleGuardÂŽtwo-stage shock sensor Control center (installed out of sight on your vehicle) with integrated status LED and Valet override switch One five-button/2-way Supercode Responder LE Remote Control One five-button/ 1-way Supercode remote Revengerâ˘Soft Chirpâ˘six-tone siren A shut-down toggle switch Window decals Your warranty registration Important information Congratulations on the purchase of your state-of-the-art remote start and alarm system. Due to the complexity of this system, it must be installed by an authorized dealer only. Installation of this product by anyone other than an authorized dealer voids the warranty. All dealers are provided with a preprinted dealer certificate to verify authorization. By carefully reading this Ownerâs Guide prior to using your system, you will maximize the use of this system and its features. You can print additional or replacement copies of this manual by accessing our web site at www.directed.com. ⤠Your warranty Your warranty registration must be completely filled out and returned within 10 days of purchase. Your product warranty will not be validated if your warranty registration is not returned. Make sure you receive the warranty registration from your dealer. It is also necessary to keep Š 2008 Directed Electronics. All rights reserved. your proof of purchase, which reflects that the product was installed by an authorized dealer. ⤠Replacement remotes Your system comes with one Responder LE remote control (P/N 7752V) and one companion remote control (P/N 7652V). If additional remotes are desired, please see your authorized dealer or visit www.directedstore.com to order. ⤠Caution This product is designed for fuel injected vehicles only. Use of this product in a standard transmission vehicle must be in strict accordance with this guide. 10 Š 2008 Directed Electronics. All rights reserved. Responder LC 2-Way 5319 ,&$ )&&,'(=6'(, Feature Description LCD Lock button Press for one second to arm. Unlock button Press for one second to disarm. Auxiliary button Remote start button ,&$ Press for one second)&&,'(=6'(, to activate remote start. Function button Allows access 7 to programming and modifies operation of the other buttons. Charge Port Label Back of remote has label to identify the remote as 2-way or 1-way. Battery Door For accessing batteries when necessary. Press and hold for 1.5 second to activate optional trunk release. 5313 Plug in the battery charger to this port. AUX Note: If Keypad Lock is On, press and then press to exit. AUX Š 2008 Directed Electronics. All rights reserved. 11 Responder LC 1-way Feature Description Transmit indicator Lock button Press for one second to arm. Unlock button Press for one second to disarm. Remote start button Press for one second to activate remote start. Auxiliary button Press and hold for 1.5 second to activate trunk release. Function button Allows access to programming and modifies operation of the other buttons. 1 WAY Label Back of remote has label to identify the remote as 2-way or 1-way Battery Door Remove to access batteries when necessary. For more details, see p.10 AUX Note: If Keypad Lock is On, press and then press to exit. AUX 12 Š 2008 Directed Electronics. All rights reserved. ⤠Transmitter configuration AUX Level Button AUX AUX AAUUXX AUX Direct Access AUX x1 AUX x2 AUX x3 ARM/LOCK (Panic) SILENT ARM SENSOR BYPASS SILENT ALARM SENSORS DISARM/UNLOCK (Panic) SILENT DISARM VALET ON/OFF CAR FINDER STARTER ON/OFF RESET RUNTIME TIMER MODE ON/OFF SMART START ON/OFF TRUNK RELEASE (Red/White) AUX 1 AUX 2 AUX 3 Advance Level Change Car (3s) Enter programming (8s) * REQUEST TEMPERATURE * RUNTIME REMAINING * EVENT HISTORY REPORT * x4 SILENT ALARM ALL ZONES DEFOGGER ON button must be pressed and held to access state. Button Press one time to Arm Arm Command: Feedback: Notes: Press one time to Arm Disarm Command: Feedback: Notes: Command: Feedback: Notes: Press one time to activate Remote Start AUX AUX Remote Start Lock Icon will appear, and one beep from remote Press/hold for 1.5 seconds to Arm the system and then activate the Panic output Unlock icon appears and remote beeps twice Remote Start Icon appears on screen. remote emits a tone AUX Š 2008 Directed Electronics. All rights reserved. 13 AUX AUX AUX Function Shift Command: Press and hold for 1.5 seconds to activate the Trunk Release. Feedback: Notes: The trunk icon appears and the remote plays a short tone. Command: Feedback: Press 1 to 4 times. ( See Function shift table.) This is an optional feature. See your sales rep/installer for details. Display shows a text message across the bottom for the command received. Notes: Each Press then release, shifts the function of the command button. Pressing more than one button simultaneously generates an Error tone and the F-Shift LED turns ON. 14 Š 2008 Directed Electronics. All rights reserved. Feature List: Silent arm AUX Command: Press one- time and then press Feedback: Screen changes to the lock icon Notes: Arms the system without chirps Silent disarm AUX AUX Command: Press one- time and then press Feedback: Screen changes to unlock icon Notes: Disarms the system without chirps Runtime reset AUX AUX Command: Press one-time and then Feedback: Remote start ON tones. Notes: Re-starts the remote start runtime counter if remote start is active. Note: If remote start is not active, the 2-WAY remote will respond with error tone. AUX Aux 1 AUX Command: Press one time and then press Feedback: The screen will show a text of the item activated Notes: This is an optional feature. See your sales rep/installer for details. AUX Cabin temperature AUX Command: Press one time, then Hold for 1.5 seconds. Feedback: Screen will display current in cabin temperatue. Notes: Cabin temperature is displayed on the remote. LED lights up to indicate a range. Š 2008 Directed Electronics. All rights reserved. 15 Sensor Bypass AUX Command: Press two- times and then Feedback: Screen will display text of sensor bypass Notes: Available when armed only: bypasses warn triggers. Send again to bypass Warn & Full Trigger; Send again to turn bypass off and monitor sensors normally. For more information, see Modified Arming Modes. AUX Valet mode AUX Command: Press two-times and then Feedback: Unlock Icon appears hollow and text states Valet when entering Valet mode. Unlock Icon appears solid and text states Valet when exiting Valet mode Notes: To enter or exit Valet mode, even if Armed. When entering Valet Mode the unlock LED blinks, and the remote beeps one time. When exiting Valet Mode the unlock LED blinks and the remote beeps two-times. AUX Timer mode AUX Command: Press two-times and then Feedback: Small timer icon appears and text reads timer mode. Notes: Enables or disables the remote start timer mode. Aux 2 AUX Command: Press two times and then press Feedback: Text will display the item activated Notes: This is an optional feature. See your sales rep/installer for details. AUX 16 Š 2008 Directed Electronics. All rights reserved. Armed status AUX Command: Press two-times and then Hold for 1.5 seconds. Feedback: Icon on remote will flash showing current status Notes: Replays last Arm /Disarm status message received. Armed (silent sensor mode) AUX Command: Press three- times and then Feedback: Image of hollow siren appears and text reads Silent Sensor. Notes: Arms the system; sensor Full Trigger will ONLY page the remote and will not activate the siren/lights. Wired inputs will page and activate the siren/lights. AUX Car finder AUX Command: Press three-times and then Feedback: Icon of vehicle flashes and text reads car finder. On Vehicle: 1 long siren chirp and parking lights flash 10 times. Notes: Arm/Disarm cancels the light flashes. AUX Smart start AUX Command: Press three-times and then press Feedback: Text reads Smart Start On Notes: Enables or disables the SmartStart feature. Aux 3 AUX AUX Command: Press three times and then press Feedback: Text will display the item activated Notes: This is an optional feature. See your sales rep/installer for details. AUX Š 2008 Directed Electronics. All rights reserved. 17 Runtime check AUX Command: Press three-times, and then Hold for 1.5 seconds. Feedback: Text reads runtime and displays time left Notes: Runtime remaining is displayed on the remote. (See page 28). Armed (silent trigger mode) AUX Command: Press four- times and then Feedback: Text displays Silent Full Notes: Arms the system; sensor and hardwire Full Triggers will ONLY page the remote and will not activate the siren/ lights. For more details see Silent Mode 2 section on page 25. AUX Rear defogger AUX AUX Command: Press four times, and then . (Only after remote start is on.) Feedback: Defogger icon appears on remote and text reads Defrost On. Notes: Automatically turns on during remote start. Last trigger AUX Command: Press four- times and then hold for 1.5 seconds. Feedback: Text scrolls last trigger. Notes: Trigger refers to the remote tones and LED pattern generated by the last alarm trigger event. 18 Š 2008 Directed Electronics. All rights reserved. Out of Range Notification If a command is issued from the remote, but the remote is beyond the range of the vehicle to receive the command, the remote will respond with an Out of Range notification. If this occurs, the remote will emit a harsh tone and the out of range indicator will appear. Since conditions will vary in different areas (ie: Weather, RF interference, etc) range may be affected and require you to be closer to the vehicle for successful transmission. ⤠System maintenance The system requires no specific maintenance. Your One way remote is powered by small coin cell lightweight 3-volt lithium battery that will last approximately one year under normal use. The 1-way remote uses one CR2032 cell battery. The 2-way remote contains a non-replaceable rechargeable battery. When the battery begins to weaken, the operating range will be reduced. ⤠Charging the Battery ⢠⢠⢠Plug in the USB charger (alternately a standard mini USB cable connected to any standard USB port on any laptop or desktop computer can also be used (cable not included)). The LCD displays âCHARGEâ while the battery level bars within the battery icon flash, displaying the current charge level as the battery charges. When charging is complete the LCD then displays âFULLâ. Note: If the battery has been severely discharged all remote functions are disabled for a short charge period. The battery status outline flashes Š 2008 Directed Electronics. All rights reserved. 19 and CHARGE is displayed on the LCD. Once the battery has accumulated enough charge for functionality, the LCD icons initialize with a beep sound, the battery status outline stops flashing and the remote becomes operational while still displaying CHARGE. Warning! The temperature range over which the battery can be charged is 0ÂşC TO 45ÂşC (32ÂşF TO 113ÂşF). Charging the battery at temperatures outside this range may cause severe damage to the battery or reduce battery life expectancy. ⤠Low battery indicator When the batteries are low on the 2-way remote it will emit two groups of beeps, the battery icon will flash and the text will display low batt, the alarm then emits an additional chirp upon disarming of the alarm to let you know its time to change the battery. When the battery is low on the 1-way remote, the remote responds the same, but without the icons available on the two way remote. Bank and present indicator Channel and text indicator Tune mode indicator Note: The Arm/Disarm chirps should be programmed ON for the Sat mode, bank selector alarm to emit any additional chirps during disarm. Ask your autho/FM rized dealer if youAMhave any questions. 11:53 Category Control CATEGORY CD/AUX SAT RADIO CH XM1-1 ⤠Battery Replacement SEEK SKIP A.S CH-001 TU Slide the door up to expose the battery beneath the holder. Remove the 2into the 6When Toggles battery. Place the new battery expired remote control. Scan mode power is returned the remote control is ready for use. REW FF SCAN 20 RP DISP PLAY/PROG VOL NR DISC- DISC+ SOUND AUDIO Š 2008 Directed Electronics. All rights reserved. PWR DE A/C MO
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Page Count : 20 PDF Version : 1.6 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:dcebe3d9-4c3f-4207-b3ba-534224e8c837 Modify Date : 2008:06:27 14:37:15-04:00 Create Date : 2008:06:27 14:37:04-04:00 Metadata Date : 2008:06:27 14:37:15-04:00 Document ID : uuid:f3bcda84-93de-42f4-84b4-859dab774463 Format : application/pdf Tagged PDF : Yes Creator : Adobe InDesign CS3 (5.0.2) Producer : Adobe PDF Library 8.0EXIF Metadata provided by EXIF.tools