Voxx Electronics DEI904200 Security/Remote Control Transmitter User Manual 904200 11 06 indd

DEI Headquarters, Inc. Security/Remote Control Transmitter 904200 11 06 indd

manual

Download: Voxx Electronics DEI904200 Security/Remote Control Transmitter User Manual 904200 11 06 indd
Mirror Download [FCC.gov]Voxx Electronics DEI904200 Security/Remote Control Transmitter User Manual 904200 11 06 indd
Document ID726856
Application IDskO4HXGW2Wte39LD+dRMNw==
Document Descriptionmanual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize132.98kB (1662288 bits)
Date Submitted2006-11-10 00:00:00
Date Available2006-12-26 00:00:00
Creation Date2006-11-09 18:28:32
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2006-11-09 18:28:35
Document Title904200_11-06.indd
Document CreatorAdobe InDesign CS2 (4.0.4)

Clifford Responder
PN 904200
The Science of Security™
Compatible with the
following systems:
20.5X
50.5X
REPLACEMENT TRANSMITTER
Model 904200, 4 Button Responder, SST, Stealth Code Remote
1.
Ignition ON: Place the key into the ignition and turn
to the ON position or start the engine.
2.
Enter PIN number: Enter your PIN number using
the Plainview 2 valet switch.
7.
TRANSMIT again: Press the button a second time.
The siren will chirp twice to confirm it has learned
your new transmitter.
8.
IGNITION OFF: Turn the ignition off and remove
the key: The alarm will chirp three times to indicate
exiting transmitter learn routine.
9.
TEST TRANSMITTER: Press the button to verify
that the transmitter is operating the alarm system.
Note: The Factory default PIN number is written on
the back of the system owner’s guide.
3.
Press/hold/release: Immediately PRESS and
HOLD the * button until you hear one chirp and the
Status LED turns on, then RELEASE the * button.
4.
PRESS/RELEASE: PRESS and RELEASE the
"blank" button once. Pause until you hear one
chirp.
5.
PRESS/RELEASE: PRESS and RELEASE the *
button once. The siren will chirp once as you push
the button.
6.
TRANSMIT: Press the button on you new transmitter. The siren will chirp once to confirm it has
received the transmission.
Note: This transmitter auto-learn routine is applicable to specific system/transmitter combinations,
use the following reference guide or consult your
local Clifford dealer for your particular application
904120 transmitter: GP1000T/Arrow 5/Arrow 3/Cyber 2
904065 transmitter: Arrow 5 /Arrow 3 / Cyber 2
904100 transmitter: Concept 100 / Concept 450/
Intelliguard 6000 / Cyber 4
904075 transmitter: All other systems
FCC/ID Notice
This device complies with Part 15 of FCC rules.
Operation is subject to the following conditions: (1)
This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.
hand and wrists, to satisfy RF exposure compliance.
This device is designed to be used in a person’s
hands and its operating configurations do not support
HHU, hand held unit
CAUTION! Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this
device.
To satisfy FCC RF exposure compliance requirements, this device should be used in hand-held, hand
operated configurations only. The device and its
antenna must maintain a separation distance of 20
cm or more from the person’s body, except for the
normal transmissions while it is carried in pockets or
holsters next to a persons’ body.
P/N 904200
11/06
MADE IN TAIWAN
©2006 Directed Electronics.
Vista CA 92081
All rights reserved.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1.1-111
About                           : 80e00dc2-d4b3-11da-8c77-bf60031a8f8d
Create Date                     : 2006:11:09 18:28:32-08:00
Metadata Date                   : 2006:11:09 18:28:35-08:00
Modify Date                     : 2006:11:09 18:28:35-08:00
Creator Tool                    : Adobe InDesign CS2 (4.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 13534 bytes, use -b option to extract)
Document ID                     : adobe:docid:indd:ef24556c-d4af-11da-a5b1-891e3e159d9b
Instance ID                     : uuid:8823ece1-be24-45ea-a4b4-9568951b0619
Rendition Class                 : proof:pdf
Derived From Instance ID        : ef24556b-d4af-11da-a5b1-891e3e159d9b
Derived From Document ID        : adobe:docid:indd:ef24556a-d4af-11da-a5b1-891e3e159d9b
Manifest Link Form              : ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 600.00
Manifest Placed Y Resolution    : 300.00, 600.00
Manifest Placed Resolution Unit : Inches, Inches
Manifest Reference Document ID  : adobe:docid:photoshop:4ce706b6-e5d2-11d6-a50c-fd7fa1a8e9b3, adobe:docid:photoshop:3b06e784-2813-11d7-9418-b7e59e9b735b
Format                          : application/pdf
Title                           : 904200_11-06.indd
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
GTS PDFX Version                : PDF/X-1a:2003
GTS PDFX Conformance            : PDF/X-1a:2003
Page Count                      : 2
Creator                         : Adobe InDesign CS2 (4.0.4)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: EZSDEI904200

Navigation menu