Voxx Electronics DEIPKETR1 Passive Keyless Entry System User Manual GPKETR1 2012 07 EN VM20120718 indd

DEI Headquarters, Inc. Passive Keyless Entry System GPKETR1 2012 07 EN VM20120718 indd

UserManual.wiki >

Voxx Electronics >

DEIPKETR1 User Manual

User manual

Directed Passive Keyless Entry System (PKE) KeyfobModel PKETR1© 2012 Directed, Vista, CA PKETR1 2012-07-18

3© 2012 Directed. All rights reserved.ContentsGovernment regulations .....................................................................................4Warning! Safety first .........................................................................................6Important information ........................................................................................6System maintenance ..................................................................................6Maximize the performance of your system ...................................................6PKE Key Fob (PKETR1) .......................................................................................7Using the system ...............................................................................................8Automatic unlocking and locking of the vehicle.............................................8Manual unlocking and locking of the vehicle ................................................8Enabling/Disabling valet mode ..................................................................9Sleep mode............................................................................................10Glossary of terms ............................................................................................11Limited lifetime consumer warranty ....................................................................12

4© 2012 Directed. All rights reserved.Government regulationsThis device complies with Part 15 of FCC rules. Operation is subject to the fol-lowing two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation.This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio fre-quency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installa-tion. If this equipment does cause harmful interference to radio or television, which can be determined by turning the equipment Off and ON, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio / TV technician for help.To satisfy FCC RF exposure compliance requirements, this device should be used in hand-held, hand operated conﬁgurations only. This device is designed to be used in a person’s hands and its operating conﬁgurations do not support normal transmissions while it is carried in pockets or holsters next to a persons’ body.

5© 2012 Directed. All rights reserved.This device complies with the Industry Canada Radio Standards Speciﬁcation RSS 210. Its use is authorized only on a no-interference, no-protection basis; in other words, this device must not be used if it is determined that it causes harmful interference to services authorized by IC. In addition, the user of this device must accept any radio interference that may be received, even if this interference could affect the operation of the device.Warning:The installation of this product must only be performed by technicians who are trained or certiﬁed by Directed dealers. Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.

6© 2012 Directed. All rights reserved.Warning! Safety ﬁrstThe following safety warning must be observed at all times:Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer.Important informationCongratulations on the purchase of your state-of-the-art Passive Keyless Entry System (PKE). Due to the complexity of this system, it must be installed by an authorized dealer only. Installation of this product by anyone other than an au-thorized dealer voids the warranty. All dealers are provided with a preprinted dealer certiﬁcate to verify authorization.By carefully reading this Owner’s Guide prior to using your system, you will maximize the use of this system and its features. You can print additional or replacement copies of this manual by accessing our web site at www.xpresskit.com. System maintenanceThe system requires no speciﬁc maintenance. Your remote is powered by a small coin cell lightweight 3-volt lithium battery (CR2032) that lasts approxi-mately 3 years under normal use. When the battery begins to weaken, the operating range is reduced.Maximize the performance of your systemNever put the key fob together with a cellphone as this may affect the range and its performance.

7© 2012 Directed. All rights reserved.PKE Key Fob (PKETR1)

8© 2012 Directed. All rights reserved.Using the systemAutomatic unlocking and locking of the vehiclePassive door unlockingThe key fob LED will start ﬂashing green once you have entered the active zone. The doors will be automatically unlocked and the starter kill (optional) will be disarmed.Note: The unlock operation may be delayed when approaching the vehicle immediately after a remote start command has been sent.Passive door lockingThe key fob LED will start ﬂashing red once you have left the active zone. The doors will be automatically locked and the starter kill (optional) will be armed. The key fob LED will turn ON solid red for 1 second to conﬁrm when the doors have been locked.Starter kill output (optional)When the optional starter kill feature is installed and active, it will interrupt the starter wire of the vehicle when doors are locked; thus preventing vehicle theft by not allowing the vehicle to be started.Note: This feature is optional and must be conﬁgured by the installer (optional parts and extra labor required).The optional starter kill is disabled as soon as the doors are unlocked by the PKE system. It can also be disabled with a toggle switch installed somewhere in the vehicle. Refer to your authorized dealer for the location.Manual unlocking and locking of the vehicleAlthough the PKE system allows for automatic locking and unlocking of the ve-hicle when you approach and leave the active zone, it also offers the ﬂexibility of manually locking and unlocking doors with the remote.

9© 2012 Directed. All rights reserved.Manual unlockingPress and hold the button until the LED on the remote ﬂashes red. The park-ing lights will ﬂash twice to conﬁrm the doors have been unlocked.Manual lockingPress and release the button for 1 second. The LED on the remote will ﬂash red indicating that the command is being sent, and the parking lights will ﬂash once to conﬁrm the doors have been locked.Note: When installed with certain remote starter models, the doors might not locks when the vehicle is running by the key.Enabling/Disabling valet modeValet mode can be enabled and disabled using the following procedure. When the feature is enabled, the automatic locking/unlocking operation upon entering the active zone will be disabled. However, manual locking/unlocking of the vehicle is possible in valet mode, as long as the ignition is off. Enable valet modeWithin the active zone, quickly press and release the key fob button twice, then press and hold until the remote LED ﬂashes red to conﬁrm the system has entered valet mode. The key fob LED will no longer ﬂash to indicate whether you are in the active zone or not.Disable valet modeWithin the active zone, quickly press and release the key fob button twice, then press and hold until the remote LED ﬂashes red to conﬁrm the system has exited valet mode. The key fob LED will ﬂash to indicate whether you are in the active zone or not.

10 © 2012 Directed. All rights reserved.Sleep modeFor security reasons, your PKE system is in sleep mode while the vehicle is in motion.Turning the sleep mode ONIn order to prolong the key fob battery life, the PKE system will enter sleep mode once the user is in the vehicle, all the doors are closed and the brake pedal is depressed (a valid key fob must be inside the vehicle).Warning: Failure to execute these steps, while the key fob is present in the vehicle, may cause its battery to be drained prematurely, and consequently your keys may become locked inside the vehicle.Turning the sleep mode OFFThe PKE system will exit sleep mode and will return to normal operation when a door is opened.Note: This feature is automatically enabled/disabled every time vehicle is in use. It does not affect the user's experience.

11© 2012 Directed. All rights reserved.Glossary of termsKey Fob: The functions of the Passive Keyless Entry (PKE) system are contained on a key fob or built into the ignition key handle itself. A key fob is by deﬁni-tion a key chain.LED: A light used to indicate the status of your system. It is located on your remote.PKE: Passive Keyless Entry.Starter Kill: An interrupt controlled by the PKE system which prevents the vehicle’s starter from cranking whenever the system is locked.

12 © 2012 Directed. All rights reserved.Limited lifetime consumer warrantyDirected promises to the original purchaser to repair or replace (at Directed’s election) with a comparable reconditioned model any Directed unit (hereafter the “unit”), excluding without limitation the siren, the remote transmitters, the associated sensors and accessories, which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met: the unit was purchased from an authorized Directed dealer, the unit was professionally installed and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information: consumer’s name, telephone number and address; the authorized dealers name, telephone number and address; complete product description, including accessories; the year, make and model of the vehicle; vehicle license number and vehicle identification number. All components other than the unit, including without limitation the siren, the remote transmitters and the associated sensors and acces-sories, carry a one-year warranty from the date of purchase of the same. ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF PURCHASE WILL BE DENIED. This warranty is non-transferable and is automatically void if: the original purchaser has not completed the warranty card and mailed it within ten (10) days from the date of purchase to the address listed on the card; the unit’s date code or serial number is defaced, missing or altered; the unit has been modified or used in a manner contrary to its intended purpose; the unit has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defects in materials or con-struction. The warranty does not cover damage to the unit caused by installation or removal of the unit. Directed, in its sole discretion, will determine what constitutes excessive damage and may refuse the return of any unit with excessive damage. TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT, ARE DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE AND/OR VANDALISM. THIS

WARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED DEALER, OR IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR OTHER CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION.Some states do not allow limitations on how long an implied warranty will last or the exclu-sion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. This warranty is only valid for sale of product(s) within the United States of America. Product(s) sold outside of the United States of America are sold “AS-IS” and shall have NO WARRANTY, express or implied. This product may be covered by a Guaranteed Protection Plan (“GPP”). See your authorized Directed dealer for details of the plan or call Directed Customer Service at 1-800-876-0800. Make sure you have all of the following information from your authorized Directed dealer:A clear copy of the sales receipt, showing the following:• Date of purchase• Your full name and address• Authorized dealer’s company name and address• Type of alarm installed• Year, make, model and color of the automobile• Automobile license number• Vehicle identification number• All security options installed on automobile• Installation receipts920-0003 06-06

PKETR1 2012-07-18Vista, CA 92081www.directed.com© 2012 Directed—All rights reservedThe company behind this system is DirectedSince its inception, Directed has had one purpose, to provide consumers with the ﬁnest vehicle security and car stereo products and accessories avail-able. The recipient of nearly 100 patents and Innovations Awards in the ﬁeld of advanced electronic technology. Directed is ISO 9001 registered.Quality Directed products are sold and serviced throughout North America and around the world.Call (800) 274-0200 for more information about our products and services.Designed and Engineered in the USA