Voxx Electronics RADAR2 Radar 2 User Manual G5 Blister card

Download:
Mirror Download [FCC.gov]
Document ID	302734
Application ID	NycuFGPgc/fUnkVe93LCaA==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.07kB (125851 bits)
Date Submitted	2003-02-13 00:00:00
Date Available	2003-03-18 00:00:00
Creation Date	2003-01-30 09:56:37
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-01-30 09:56:37
Document Title	G5 Blister card.qxd
Document Creator	PScript5.dll Version 5.2
Document Author:	Summer

G5 Blister card.qxd
1/30/2003
9:57 AM
Page 1
16 Channel, 5 Button, ACG Replacement Transmitter
PN 904075
16 Channel, 5 Button, ACG Replacement Transmitter
PN 904075
To program your new transmitter:
The Science of Security™
1. IGNITION ON: Place the key into the ignition and
turn to the ON position or start the engine.
2. ENTER PIN NUMBER: Enter your PIN number
using the Plainview 2 valet switch.
Note: The Factory default PIN number is 2 and can
button twice then the
be entered by pressing the
"blank" button once of the Plainview 2 valet switch.
3. PRESS/HOLD/RELEASE: Immediately PRESS
button until you hear one chirp
and HOLD the
and the Status LED turns on, then RELEASE the
button.
4. PRESS/RELEASE: PRESS and RELEASE the
"blank" button once. Pause until you hear one
chirp.
5. PRESS/RELEASE: PRESS and RELEASE the
button once. The siren will chirp once as you
push the button.
Compatible with the
following systems:
Avantguard 5 (G5)
Solaris 5 (G5)
IntelliGuard 850 (G5)
IntelliGuard 750 (G5)
Concept 550 (G5)
6. TRANSMIT: Press the
button on your new
transmitter. The siren will chirp once to confirm it
has received the transmission.
7. TRANSMIT AGAIN: Press the
button a
second time. The siren will chirp twice to confirm
it has learned your new transmitter.
8. IGNITION OFF: Turn the ignition off and remove
the key: The alarm will chirp three times to
indicate exiting transmitter learn routine.
9. TEST TRANSMITTER: Press the
button
to verify that the transmitter is operating the
alarm system.
Note: This transmitter auto-learn routine is applicable
to specific system/transmitter combinations, use the
following reference guide or consult your local
Clifford dealer for your particular application
904065 transmitter: Arrow 5 /Arrow 3 / Cyber 2
904100 transmitter: Concept 100 / Concept 450/
Intelliguard 6000 / Cyber 4
904075 transmitter: All other systems
This device complies with Part 15 of FCC rules.
Operation is subject to the following conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference
received, including interference that may cause
undesired operation. Changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate this device.
Tazor4 (G4)
Bullet4 (G4)
P/N 904075
11/02
TM
MADE IN TAIWAN
© 2002 Directed Electronics, Inc. Vista CA 92083
All rights reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:01:30 09:56:37-08:00
Modify Date                     : 2003:01:30 09:56:37-08:00
Page Count                      : 1
Creation Date                   : 2003:01:30 17:56:37Z
Mod Date                        : 2003:01:30 17:56:37Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Summer
Metadata Date                   : 2003:01:30 17:56:37Z
Creator                         : Summer
Title                           : G5 Blister card.qxd

EXIF Metadata provided by EXIF.tools