Vtech Sort And Spin Blender Owners Manual &
2015-08-19
: Vtech Vtech-Sort-And-Spin-Blender-Owners-Manual-109714 vtech-sort-and-spin-blender-owners-manual-109714 vtech pdf
Open the PDF directly: View PDF .
Page Count: 11
![](asset-1.png)
Sort & Spin Blender™
© 2009 VTech
Printed in China
91-002353-007-000 美
![](asset-2.png)
To learn more about the Infant Learning® series and other VTech® toys, visit www.vtechkids.com
![](asset-3.png)
2
INTRODUCTION
Thank you for purchasing the VTech
®
Sort & Spin Blender™
learning toy!
The VTech® Sort & Spin Blender™ is packed with early learning fun.
Sort the shapes to learn colors, shapes and hear a variety of sing along
songs, phrases and familiar melodies. Turn the blending knob to mix
up the shapes, hear a variety of sounds, phrase and melodies. The
VTech® Sort & Spin Blender™ encourages motor skill development
and imaginative play. Let’s get blending!
Introduction
SOUND EFFECT
BUTTON
BLENDING
KNOB
5 SHAPE
SORTER
PIECES
ON/OFF/MODE
SELECTOR SWITCH
REMOVABLE LID
![](asset-4.png)
3
INCLUDED IN THIS PACKAGE
• One VTech®
Sort & Spin Blender™
• One instruction manual
WARNING: All packing materials, such as tape, plastic sheets,
wire ties and tags are not part of this toy, and should
be discarded for your child’s safety.
Unlocking the Packaging Locks:
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the unit. Use a coin or a screwdriver
to loosen the screw.
3. Install 2 new ‘AA’ (AM-3/LR6) batteries
following the diagram inside the
battery box. (The use of new alkaline
batteries is recommended for maximum
performance.)
4. Replace the battery cover and tighten the screw to secure.
Rotate the packaging lock 90 counter-clockwise.
Pull out the packaging lock.
Instructions & Activities
![](asset-5.png)
4
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Remove the batteries from the equipment when the unit will not be
used for an extended period of time.
• Always remove exhausted batteries from the equipment.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended
are to be used.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
PRODUCT FEATURES
1. ON/OFF/MODE SELECTOR SWITCH
To turn the unit ON, slide the ON/OFF/
MODE SELECTOR SWITCH to the
Learning Mode ( ), Play Mode ( )
or Music Mode ( ) position. To turn
the unit OFF, slide the ON/OFF/MODE
SELECTOR SWITCH to the OFF
position.
Instructions & Activities
![](asset-6.png)
5
2. VOLUME CONTROL SWITCH
To adjust the volume, slide the VOLUME CONTROL SWITCH on
the bottom of the unit to the LOW VOLUME ( ) or the HIGH
VOLUME ( ) position.
3. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech® Sort & Spin Blender™ will
automatically power-down after approximately 30 seconds without
input. The unit can be turned on again by pressing any button.
PLEASE NOTE: This toy was designed for role-play purposes only.
Please do not add any liquid as it will damage the unit.
ACTIVITIES
1. Slide the on/off/mode selector switch
to select a mode of play. You will hear a
sing along song and fun phrases. The
light will flash with the sound.
2. Insert a shape sorter piece into the
corresponding shape slot to learn about
shapes and colors in the learning mode,
colors and fruit in the play mode and a
variety of melodies in the music mode.
The light will flash with the sound.
3. Twist the blending knob to spin the
disc inside the blender. You will hear
fun phrases and blending sounds or
random melodies. The shapes will spin
around inside the blender. The light will
flash with the sound.
Instructions & Activities
![](asset-7.png)
6
4. Press the sound effect button to
hear fun phrases and a melody. When
melodies are playing, press the sound
effect button quickly to increase the
tempo of the melody. The light will flash
with the sound.
5. Remove or replace the lid to hear fun
sounds, short tunes or phrases. The
light will flash with the sound.
6. Drop the shape sorter pieces into the
top of the blender to hear a variety of fun
sounds, melodies or sing along songs.
The light will flash with the sound.
7. If there is no input to the unit after approximately ten seconds,
you will hear fun phrases or melodies. After another ten seconds
without input, you will hear a sing along song. If there continues to
be no input, you will hear “Bye-bye” and the unit will automatically
power-down.
Instructions & Activities
![](asset-8.png)
7
MELODY LIST:
1. Polly Put the Kettle on
2. Pat-a-Cake
3. Hickory, Dickory, Dock
4. Hot Cross Buns
5. Yankee Doodle
6. Twinkle, Twinkle, Little Star
7. Here We Go Round the Mulberry Bush
8. Alouette
9. London Bridge
10. Mary Had a Little Lamb
SONG LYRICS:
SONG 1 (to the tune of B-I-N-GO)
Join me now and we’ll have fun,
We’ll whip up something tasty.
Add shapes, blend them up!
Add shapes, blend them up!
Add shapes, blend them up!
Hooray, your drink is ready!
SUNG SONG 2
Drop in an apple,
Then add some grapes,
And I’ll whip you up a nice drink.
SUNG SONG 3
Blending fast and blending slow,
Mixing up drinks just for you.
Instructions & Activities
![](asset-9.png)
8
Care & Maintenance/Troublshooting
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working, please follow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
For information on this product’s warranty, please call VTech® at 1-800-
521-2010 in the U.S. or 1-877-352-8697 in Canada.
![](asset-a.png)
9
IMPORTANT NOTE:
Creating and developing Infant Learning products is accompanied
by a responsibility that we at VTech® take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department at
1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for
help
Other Info
![](asset-b.png)
10
Other Info
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME
À LA NORME NMB-003 DU CANADA.