VuPoint Solutions LIH01 VU Cam User Manual Porch ManualUS 0310
VuPoint Solutions Inc VU Cam Porch ManualUS 0310
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3525145 |
| Application ID | qpBbepmD8BiR5ybdc04d8A== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 78.98kB (987266 bits) |
| Date Submitted | 2017-08-24 00:00:00 |
| Date Available | 2017-08-24 00:00:00 |
| Creation Date | 2017-03-10 17:08:59 |
| Producing Software | Adobe PDF library 15.00 |
| Document Lastmod | 2017-03-10 17:08:59 |
| Document Title | Porch_ManualUS_0310 |
| Document Creator | Adobe Illustrator CC 2017 (Macintosh) |
USER’S MANUAL Kit Components VUcam Smart Socket Adapter Camera Video resolution Field of View Wi-Fi® Bluetooth® Siren Alarm Lighting Control Weatherproof Design Dimensions (L x W x H) Microphone Speaker Input Voltage Compatibility Bracket Conduit VUcam Operating Temperature Lamp Base Type Output Voltage Input Voltage Lighting Control 01 Mount Screws x 2 Anchors x 2 AC/ DC Adapter Allen Wrench Power Cable (1m) Power Extension Cable (3m) Cable Clips for 1m Cable x 6 Cable Clips for 3m Cable x 6 Bluetooth® Light bulb Smart Socket Adapter Dimensions (L x W x H) Operating Temperature HD 1080p resolution 1920x1080 at 30 fps. H.264 180 degrees (diagonal) 2.4GHz & 5GHz 802.11 b/g/n/ac Bluetooth® BLE 4.0 100 dB On/Off/Light Scheduling Yes 2.4" x 2.4" x 5.9" Built-in Built-in DC: 5V/1A iOS: 8 or above / Android : 4.3 or above -4°F - 113°F Socket type E26 DC: 5V/1A 120VAC, 60Hz On/Off/Light Scheduling BLE Mesh Network Bluetooth® BLE 4.0 Support maximum 40W, A15/A19 size Incandescent, CFL or LED light bulb Recommended LED light bulb (not included) 2.4" x 2.0" x 2.5" -4°F - 113°F 02 Power Connection Options Installation Guide VUcam with Smart Socket Adapter VUcam Model No.: OC100KU Smart Socket Adapter Model No.: SA010KU Compatible light bulb types Compatible light fixtures For use only with max. 40W, E26 and standard A15 / A19 size Incandesent, CFL or LED light bulb. Ceiling lamp and Wall mounted lamp. NOT Compatible light bulb types NOT Compatible light fixtures Halogen, Candelabra, Triple Twin Tube, Two Prong, Globe, Motion-activated Light and others. Light fixtures with motion sensor or 12-hour mechanical timer. Compatible light bulb types Compatible light fixtures Smart Socket Adapter for use in dry or damp locations 04 Drag out Power Cable through the shade and then adjust silicon sleeve from Power Cable to protect the cable. Smart Socket Adapter Installation Before installation, ensure the power switch is OFF or disconnect power at the fuse. Screw lamp sconce or lamp cover back to your light fixture. Remove cover and insert Power Cable to Smart Socket Adapter. Use Cable Clips to manage the cable if necessary. Install Smart Socket Adapter to fixture, and thread in light bulb. Disassemble the lamp sconce if necessary. Upward Installation 05 Downward installation For another light fixture, please make additional purchase on second Smart Socket Adapter and install it for light synchronization. 06 Remove back cover from the bottom of the camera, insert Power Cable, and then coil the cable around wrapping posts. Power Extension Cable Power Cable Power Extension Cable Power Cable For camera installation with light fixture above the door (optional) Use Power Extension Cable to connect Power Cable from camera with ceiling light fixture above the door. Use Cable clips to manage the cable if necessary. AC / DC Adapter Alternative power source Connect camera directly to alternative power outlet with Extension Power Cable. Use Cable clips to manage the cable if necessary. Reinstall the back cover to the camera. Vertical line Horizontal line Mounting the Camera After using the Leveler to adjust the balance of the Bracket, mount it with Anchors and Screws. 07 08 Attach the camera to the Bracket and slightly pull camera down to snap the camera in place. Manage the cable with optional Conduit. Remove the adhesives from the Conduit, then slide the bottom of the Conduit into the Bracket. Align Power Cable and extend the Conduit to preferred length. Secure conduit onto the wall. Adjust the camera to your desired position and angle. Tighten the security screws on both sides by using the supplied Allen Wrench. Do not over-tighten the security screws. 09 Adjust the lens vertically with fingers to your desired position. 10 Installation Guide Companion with Mobile 1. Download "VUpoint Home" app Scan the QR code or search “VUpoint Home” on google play or app store to download the app. 2. Open VUpoint Home app Tap the app icon to launch application. 3. Add camera On the homepage, tap the add camera icon in the upper right corner. 4. Before set up Follow on-screen instructions to proceed with installation. 5. Camera found Once camera device is found, tap "Next" to continue setup. 6. Connect wifi Enter your wifi password then tap "Next". 12 Appendix Troubleshooting and FAQ Regulations and Compliance Compatibility 7. Camera added After camera added, tap "Add other device" to pair camera with companion devices. 8. Adding Smart Socket Adapter From New Device page, tap to select Smart Socket Adapter to pair. Troubleshooting and FAQ Note: Model Number and Serial Number (S/N) are located on the packaging, instruction manual, or on the product. Please have this information ready before contacting tech support. Frequently Asked Questions VUcam 1. How long will my recordings be available? All VUcam units come standard with 24-hour event review and download. With premium subscription plans, you can “go back in time” to access every event that your VUcam generated. 2. How many VUcams can I install? There’s no limit. We recommend installing VUcams at all major entry points. You can add multiple cameras to your VUpoint Home app and manage each camera all in one app. 9. New device light on Selected Smart Socket Adapter is light on in app as well as on device. 13 10. Complete Device map illustrates which devices are connected. 3. I do not see any VUcam show up in setup screen. VUcam uses Bluetooth® LE 4.0 for setup. You will need to be within a maximum distance of 30 feet from VUcam devices and have Bluetooth enabled on your mobile device. Try rebooting your mobile device and launch the VUpoint Home app again when necessary. 14 4. My VUcam is “Offline”. 1) Reboot camera: Turn off your VUcam (using the light switch it’s connected to) and wait at least 10 seconds. Then, turn on the light switch back on. 2) Run through the set-up process: Re-add the VUcam again. This may be caused by weak Wi-Fi signal. Improve performance by moving your router closer to your VUcam, or adding a Wi-Fi extender in between. 5. How can I reset my camera? VUcam can be reset through app, you can remove camera and re-add the camera in app again. You can also reset the camera manually by pressing the reset button at back for 7 seconds until you see the flash light changes to red. Smart Socket Adapter 1. Do I have to leave my light switch on? Yes, VUcam uses power continuously, so you will have to leave the light switch on. We have provided with your VUcam a “Keep it on” label as reminder to leave the switch on. 2. Can I use LED bulb with Smart Socket Adapter? Yes, we recommend that you use an LED bulb. 3. What is the maximum light bulb wattage I can use with the Smart Socket Adapter? Smart Socket Adapter supports up to maximum 40W. 4. My Smart Socket Adapter is “Offline”. VUcam uses BLE Mesh Network that is capable to provide connections for all devices within 30 feet. Firstly, ensure your Smart Socket Adapter is within this range with the camera. If your device still looks offline in the device map of VUpoint Home app, please go through the reset procedures once. Regulations and Compliance Safety & Operations IMPORTANT SAFETY INSTRUCTIONS Please adhere to the following safety instructions. Failure to follow the instructions outlined in the user’s manual may lead to serious personal injury and possible property damage. Smart Socket Adapter DC power output max. up to 5W. The Smart Socket Adapter must be installed in the listed lampholder. Power Cable use only with the Camera Model: OK110KU. Class 2 output connections are not intended for supporting products or appliances. Use only the Power Cable packaged with the Camera Model: OK110KU. The Smart Socket Adapter and Power Cable may become warm during normal use. Always allow adequate ventilation around the Smart Socket Adapter and Power Cable and use care when handing. Unplug the device if any of the following conditions exist: • The Power Cable or Smart Socket Adapter has become frayed or damaged • The Power Connector or Smart Socket Adapter is exposed to rain, liquid, or excessive moisture • The Power Cable or Smart Socket Adapter has become damaged • You suspect the Power Cable or Smart Socket Adapter needs service or repair • You want to clean the Power Cable or Smart Socket Adapter • Class 2 output connections are not intended for supporting products or appliances SAVE THESE INSTRUCTIONS 5. How can I reset my Smart Socket Adapter? Smart Socket Adapter can be reset through app, you can remove Smart Socket Adapter and re-add it in app again. Another reset method is to press the on/off button in a designed sequence. When the light is on, press the light off for 3 seconds then on for 1 second. Repeat this sequence for three times. After reset, the light bulb will flash for 3 times, please note the light bulb will not light up once reset is successful. 15 16 FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. (i) the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit; (iii) the worst case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated. 17 Until further notice, devices subject to this section shall not be capable of transmitting in the band 5600-5650 MHz.This restriction is for the protection of Environment Canada’s weather radars operating in this band. OC100KU FCC ID: 2AK7ELIH01 SA010KU FCC ID: 2AK7ELIH03 IC Caution This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation estautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectrique subi, mêmesi le brouillage est susceptible d'en compromettre le fonctionnement. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 etla conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne surl'exposition et la conformité de rf. Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ouémetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps. OC100KU IC: 22430-LIH01 SA010KU IC: 22430-LIH03 18 Compatibility Socket for use in dry or damp locations. Support up to max. 40W, E26 and standard A15 / A19 size incandesent, CFL or LED light bulb. Socket requires continuous power from light fixtures. Not compatible to motion-activated light fixtures and power timer. For a compatible list of light bulbs and light fixtures, visit: www.vupointhome.com/compatibility App Store is a service mark of Apple Inc., in the U.S. and other countries. Google Play badge is a trademark of Google, Inc. Use of this trademark is subject to Google Permission. Product names, logos, brands, and other trademarks, referred to herein are the property of their respective trademark holders. All trademarks remain the property of their respective holders, and are used only to directly describe the products being provided. These trademark holders are not affiliated with VuPoint Solutions Inc. They do not sponsor or endorse VuPoint Solutions Inc. products or services. VUcam_US Manual_17-0310 vupointhome.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42 Format : application/pdf Title : Porch_ManualUS_0310 Metadata Date : 2017:03:10 17:08:59+08:00 Modify Date : 2017:03:10 17:08:59+08:00 Create Date : 2017:03:10 17:08:59+08:00 Creator Tool : Adobe Illustrator CC 2017 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 156 Thumbnail Format : JPEG Thumbnail Image : (Binary data 11050 bytes, use -b option to extract) Instance ID : uuid:13275623-fed9-f742-bcad-7e45ceb3263d Document ID : xmp.did:2610f416-2e60-494d-8a4f-41b9fe38edbe Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:eb64787a-8536-9347-9ba1-41b575ec99f2 Derived From Document ID : xmp.did:46a43c51-2bd7-45a1-85a0-7c2cc634f4a7 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:aa94b4f7-fb9b-4b2d-8570-d71bf7756955, xmp.iid:2610f416-2e60-494d-8a4f-41b9fe38edbe History When : 2017:02:23 12:56:06+08:00, 2017:03:10 17:08:49+08:00 History Software Agent : Adobe Illustrator CC 2017 (Macintosh), Adobe Illustrator CC 2017 (Macintosh) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : /Users/steve/Desktop/VU/--packaging/imgs/Porch.jpg, /Users/steve/Desktop/VU/--packaging/imgs/BW/5.1.0b New device light on.jpg, /Users/steve/Desktop/VU/--packaging/imgs/App_Adddevicetips.jpg, /Users/steve/Desktop/VU/--packaging/imgs/App_emptycamera.jpg, /Users/steve/Desktop/VU/--packaging/imgs/2.1 Porch Added.jpg, /Users/steve/Desktop/VU/--packaging/imgs/BW/5.1.0a New device.jpg, /Users/steve/Desktop/VU/--packaging/imgs/5.0.5 wifi.jpg, /Users/steve/Desktop/VU/--packaging/imgs/2.0 Porch Found.jpg, /Users/steve/Desktop/VU/--packaging/imgs/GarageCam.psd, /Users/steve/Desktop/VU/--packaging/imgs/Socket.psd, /Users/steve/Desktop/VU/--packaging/imgs_gm_output/GarageCam.psd, /Users/steve/Desktop/VU/--packaging/imgs_gm_output/Socket.psd, /Users/steve/Desktop/VU/--packaging/imgs_gm_output/Socket4.psd, /Users/steve/Desktop/VU/--packaging/imgs/GarageCam.psd, /Users/steve/Desktop/VU/--packaging/imgs/Socket.psd Manifest Reference Document ID : xmp.did:cbb684a6-b28c-41ce-953a-a6b321b2947a, 47742D3564F18F6F73E0CDD4A0434A58, adobe:docid:photoshop:c27c4612-0243-117a-b00c-ee1eccda6d1b, xmp.did:2299a172-06ed-4c02-9a72-dad4d1732646, adobe:docid:photoshop:aaf64a57-1697-117a-9f52-b6c51f31b642, 89A66F8CAED4AC53EB760501F81411FB, adobe:docid:photoshop:215b2d62-0244-117a-b00c-ee1eccda6d1b, xmp.did:e81ee789-d91d-405d-8a00-04cc0e37ee00, adobe:docid:photoshop:857b8dac-f81e-1179-a8bc-e020041ae486, adobe:docid:photoshop:60b80806-f80c-1179-a8bc-e020041ae486, adobe:docid:photoshop:857b8dac-f81e-1179-a8bc-e020041ae486, adobe:docid:photoshop:60b80806-f80c-1179-a8bc-e020041ae486, adobe:docid:photoshop:87d3de58-f80c-1179-a8bc-e020041ae486, adobe:docid:photoshop:857b8dac-f81e-1179-a8bc-e020041ae486, adobe:docid:photoshop:60b80806-f80c-1179-a8bc-e020041ae486 Manifest Reference Instance ID : xmp.iid:cbb684a6-b28c-41ce-953a-a6b321b2947a, xmp.iid:20c1bec3-94ee-4765-96b9-b96847e09812, xmp.iid:4a1ba5da-3d19-499e-ade8-85dd4d936d76, xmp.iid:a9604d14-3501-46ee-bea4-a19f0531cdf0, xmp.iid:b646933a-934d-43bb-971d-925b5162ebe0, xmp.iid:f2f0a933-0bdb-4cd3-8672-1b31da35c4d6, xmp.iid:2f7d9479-4b7f-40fe-928e-f3f9ce3c0649, xmp.iid:034b1bbe-fe5c-4d57-98b8-3f481a20098d, xmp.iid:c05bdc96-b1a2-4732-9e22-2f2ab86df62c, xmp.iid:625b2c15-0315-4bf2-85f0-29b9cd8bf4ef, xmp.iid:c05bdc96-b1a2-4732-9e22-2f2ab86df62c, xmp.iid:625b2c15-0315-4bf2-85f0-29b9cd8bf4ef, xmp.iid:ff35910c-1922-46a9-966a-c99ae1961100, xmp.iid:c05bdc96-b1a2-4732-9e22-2f2ab86df62c, xmp.iid:625b2c15-0315-4bf2-85f0-29b9cd8bf4ef Ingredients File Path : /Users/steve/Desktop/VU/--packaging/imgs/Porch.jpg, /Users/steve/Desktop/VU/--packaging/imgs/BW/5.1.0b New device light on.jpg, /Users/steve/Desktop/VU/--packaging/imgs/App_Adddevicetips.jpg, /Users/steve/Desktop/VU/--packaging/imgs/App_emptycamera.jpg, /Users/steve/Desktop/VU/--packaging/imgs/2.1 Porch Added.jpg, /Users/steve/Desktop/VU/--packaging/imgs/BW/5.1.0a New device.jpg, /Users/steve/Desktop/VU/--packaging/imgs/5.0.5 wifi.jpg, /Users/steve/Desktop/VU/--packaging/imgs/2.0 Porch Found.jpg, /Users/steve/Desktop/VU/--packaging/imgs/GarageCam.psd, /Users/steve/Desktop/VU/--packaging/imgs/Socket.psd, /Users/steve/Desktop/VU/--packaging/imgs_gm_output/GarageCam.psd, /Users/steve/Desktop/VU/--packaging/imgs_gm_output/Socket.psd, /Users/steve/Desktop/VU/--packaging/imgs_gm_output/Socket4.psd, /Users/steve/Desktop/VU/--packaging/imgs/GarageCam.psd, /Users/steve/Desktop/VU/--packaging/imgs/Socket.psd Ingredients Document ID : xmp.did:cbb684a6-b28c-41ce-953a-a6b321b2947a, 47742D3564F18F6F73E0CDD4A0434A58, adobe:docid:photoshop:c27c4612-0243-117a-b00c-ee1eccda6d1b, xmp.did:2299a172-06ed-4c02-9a72-dad4d1732646, adobe:docid:photoshop:aaf64a57-1697-117a-9f52-b6c51f31b642, 89A66F8CAED4AC53EB760501F81411FB, adobe:docid:photoshop:215b2d62-0244-117a-b00c-ee1eccda6d1b, xmp.did:e81ee789-d91d-405d-8a00-04cc0e37ee00, adobe:docid:photoshop:857b8dac-f81e-1179-a8bc-e020041ae486, adobe:docid:photoshop:60b80806-f80c-1179-a8bc-e020041ae486, adobe:docid:photoshop:857b8dac-f81e-1179-a8bc-e020041ae486, adobe:docid:photoshop:60b80806-f80c-1179-a8bc-e020041ae486, adobe:docid:photoshop:87d3de58-f80c-1179-a8bc-e020041ae486, adobe:docid:photoshop:857b8dac-f81e-1179-a8bc-e020041ae486, adobe:docid:photoshop:60b80806-f80c-1179-a8bc-e020041ae486 Ingredients Instance ID : xmp.iid:cbb684a6-b28c-41ce-953a-a6b321b2947a, xmp.iid:20c1bec3-94ee-4765-96b9-b96847e09812, xmp.iid:4a1ba5da-3d19-499e-ade8-85dd4d936d76, xmp.iid:a9604d14-3501-46ee-bea4-a19f0531cdf0, xmp.iid:b646933a-934d-43bb-971d-925b5162ebe0, xmp.iid:f2f0a933-0bdb-4cd3-8672-1b31da35c4d6, xmp.iid:2f7d9479-4b7f-40fe-928e-f3f9ce3c0649, xmp.iid:034b1bbe-fe5c-4d57-98b8-3f481a20098d, xmp.iid:c05bdc96-b1a2-4732-9e22-2f2ab86df62c, xmp.iid:625b2c15-0315-4bf2-85f0-29b9cd8bf4ef, xmp.iid:c05bdc96-b1a2-4732-9e22-2f2ab86df62c, xmp.iid:625b2c15-0315-4bf2-85f0-29b9cd8bf4ef, xmp.iid:ff35910c-1922-46a9-966a-c99ae1961100, xmp.iid:c05bdc96-b1a2-4732-9e22-2f2ab86df62c, xmp.iid:625b2c15-0315-4bf2-85f0-29b9cd8bf4ef Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 200.000000 Max Page Size H : 99.998389 Max Page Size Unit : Millimeters Font Name : MyanmarSangamMN, CenturyGothic, CenturyGothic-Italic, CenturyGothic-Bold, HelveticaNeue, HelveticaNeueLTStd-Roman Font Family : Myanmar Sangam MN, Century Gothic, Century Gothic, Century Gothic, Helvetica Neue, Helvetica Neue LT Std Font Face : Regular, Regular, Italic, Bold, Regular, 55 Roman Font Type : TrueType, TrueType, TrueType, TrueType, TrueType, Open Type Font Version : 10.0d1e3, Version 2.35, Version 2.35, Version 2.35, 10.0d40e1, Version 1.047;PS 001.103;Core 1.0.38;makeotf.lib1.6.5960 Font Composite : False, False, False, False, False, False Font File Name : Myanmar Sangam MN.ttc, Century Gothic, Century Gothic, Century Gothic, HelveticaNeue.dfont, HelveticaNeueLTStd-Roman.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000000 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003100 Swatch Groups Colorants Black : 0.003100 Producer : Adobe PDF library 15.00 Creator Version : 21.0.2 Page Count : 11 Creator : Adobe Illustrator CC 2017 (Macintosh)EXIF Metadata provided by EXIF.tools