WEIKING TECHNOLOGY BT08 30 PIN BLUETOOTH AUDIO RECEIVER User Manual BTR006

SHENZHEN WEIKING TECHNOLOGY CO.,LTD 30 PIN BLUETOOTH AUDIO RECEIVER BTR006

User Manual

BT08Dock Bluetooth audio receiverUser’s manualBefore use…………………………………………………………. .11. About BT08………………………………………………………….12. System requirements………………………………………………. .13. Overview of BT08…………………………………………...………1Getting started……………………………………………………. . 2Instruction for the key……………………………………………. .2Pairing with Bluetooth devices……………………………………..2Remarks……………………………………………………………. .3Specifications…………………………………………………….... .3Welcome to use this Dock Bluetooth stereo receiver BT08. Please read thisuser’s manual carefully before use.
Before use1. About BT08BT08 is a stereo Bluetooth audio receiver. You can put it to any 30 pinspeaker and upgrade it to be Bluetooth speakers to play music from anyBluetooth enabled audio devices.The product comes without battery and powered by speaker directly.2. System requirementsAudio device with 30 pin connector. Bluetooth transmitting devicesupporting A2DP profile, such as Bluetooth mobile phones, BluetoothMP3s ,Tablet PC etc.3. Overview of BT0823１1music pause/play230 pin connector3Led indication1
Getting started1) First powered on the 30 pin speaker2) Plug the BT08 onto the 30 pin speaker; The BT08 will auto go intopairing mode with blue led flashing;3) Turn on the Bluetooth from your audio device and searching the name;Name of “Dock receiver” will be shown on your audio searching list;If need to put password,please enter “0000”to match. Pairing time iswithin 1 minutes and varied from difference audio devices.A soundwill come out if paired successfully. It only need to be paired at thefirst time and it will directly connect with the last audio device whenuse second time.4) Just play the music after successful connecting.Instruction for the keyPress shortly to play or pause the current music;Press more than3 seconds to disconnect the current audio devices.Note:30 pin speaker could control the the audio devices to do play/pause/next/previous .Pairing with Bluetooth mobile phoneEnsure your mobile phone supports A2DP profile. The pairing procedureswill vary depending on different models of mobile phones. Please refer toyour mobile phone user’s manual for further information. The generalpairing procedures are as follows:1) Place the receiver and Bluetooth mobile phone where they are easilyviewable by no more than 1 meter apart;2) Plug the receiver onto the speaker and powered the speaker;3) Activate your mobile phone’s Bluetooth function and set your mobilephone to search for Bluetooth devices within range, and select “DockReceiver” from the list of devices shown;4) The blue led will flashed quickly under pairing mode.5) If need password, please enter password or PIN No: “0000”;6) If prompted by your mobile phone to connect, select “Yes” (This willvary among mobile phone models);7) After successful connecting, the sound will come out and the blue LEDflashes slowly.
Remarks:After successful pairing, the receiver and the mobile phone willremember each other, they will no need to re-pair next time.Every time the receiver is turned on, it will automatically connect to lastconnected device. If you want to pair it with other devices, please turnoff the Bluetooth function of last connected devices first and pair thereceiver with the new device according to steps 1～7 mentioned above.When the reveiver is turned on and doesn’t connect to any devices,please plug out and replug in , it will automatically connect to the lastconnected device.When the receiver and the mobile phone are out of effective range todisconnected, they can connect to each other automatically once goingback to effective range.If the Bluetooth version of your mobile phone is V2.1 or above, it will noneed to enter PIN No. when the receiver pairs with the mobile phone.SpecificationsBluetooth version Bluetooth V3.0Bluetooth profiles A2DP /AVRCP/HSP/HFPFrequency range 20Hz-20KHzOperating distance 10 meters, Class IIDimensions 48.6*32*9.5mmWeight 12gNotes:1. This device could have memory for latest 8 devices. It will auto delete 1device if more than 8 device name.
Federal Communications Commission (FCC) StatementThis device complies with part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses andcan radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Warning: Changes or modifications made to this device not expresslyapproved by Shenzhen Weiking Technology Co., Ltd. may void the FCCauthorization to operate this device.Note: The manufacturer is not responsible for any radio or tv interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user’s authority to operate the equipment.

Navigation menu