WEIKING TECHNOLOGY MOUSE Wireless Mouse User Manual wireless mouse

SHENZHEN WEIKING TECHNOLOGY CO.,LTD Wireless Mouse wireless mouse

User Manual

2.4G Wireless Mouse Instruction Book 1) Specifications (1) Frequency Band： 2.4GHz ISM band (2)Carrier Frequency： 2402~2480 MHz (3)Number of Channel： 40 channels (4) Rated Voltage: 3.0V / 2*AAA (5)Rated Current: 10 mA (6)Modulation Type： GFSK (7)Mode of operation ： half duplex (8)Bit Rate of Transmission： 1Mbps (9)Antenna Type： PCB Antenna (10)Antenna gain： 0 dBi (11)Operating Temperature Range： 0~40 °C (12)Air-protocol length: ____14~26 Bytes____ (13)Bandwidth:____2MHz____ sensitivity: -85dBm (14)Transceiver Distance: ____10m______ (15) Mouse MCU Oscillator : 16MHz (16) Operation System: Windows98/2000/XP / Vista/Windows7 system 2.Operation Instruction (1)Standby Mode：If the mouse does not moved or operated in 5 seconds, it will turn into standby mode and the power consumption decreases by half. (2)Sleep mode :If the standby mode lasts 5 minutes, the mouse will turn into sleep mode and the power consumption decreases to 1/10. It will moved or any of its 3 buttons is pressed. (3)Power Off: If you will not use your mouse in a long time,you may turn your power switch to off side to save the battery power.
3.Pieces z Mouse Front View: 1. Left click 2. Right click 3. Scroll wheel z Mouse Back View: 1. On/off Switch 2. Battery cover 3. USB Receiver Storage
4.Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions; (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help. Warning:Changes or modifications made to this device not expressly approved by SHENZHEN WEIKING TECHNOLOGY CO.,LTD may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. 　 　

Navigation menu