WENZHOU MTLC ELECTRIC APPLIANCES JWF15S On/Off Switch User Manual

WENZHOU MTLC ELECTRIC APPLIANCES CO., LTD. On/Off Switch Users Manual

Users Manual

INSTALLATION INSTRUCTIONS -02- -03--01- DESCRIPTION FEATURES JWF15SOn/Off Switch  SPECIFICATIONS INSTALLATIONSingle Switch Wiring SchematicWiring Diagram:WARNINGS AND CAUTIONS6. Check connections to be sure they are tight and no bare conductors are exposed.7. Insert the JWF15S switch into the standard outlet box carefully.8. Make sure the JWF15S switch to the box using the supplied screws.9. Attach the wall plate.10. Restore power at the circuit breaker and test the system.White (Neutral)Red(Load)Green (Ground)Black (Line/Hot)Wireless Home Automation Control Device OPERATIONS Manual ControlThe switch paddle on the JWF15S allows the user to:1, Turn ON/OFF the connected lighting.1, To turn the connected lighting ON: Tap the top of the switch paddle.2, To turn the connected lighting OFF: Tap the bottom of the switch paddle.Perfect Replacement for regular wall switch, 120VAC, 15Amp Manual and Remote ON/OFF control of any connected lighting and other electricalelectrical loadThe JWF15S ON/OFF Switch is a perfect wireless manual and remote on/off controlreplacement of regular wall switch, controlling incandescent, LED, fluorescent, ballastand so on. 4. Disconnect the wiring from the existing switch.5. Connect this JWF15S switch as shown in the wiring diagram: Black lead to hot wire,white lead to neutral wire, red lead to load wire, green lead to ground wire.1.WARNING : To avoid fire, shock, or death. High Voltage - Turn off power at circuitbreaker or fuse and test that power is off before wiring.2. Remove wall plate and existing switch mounting screws.3. Carefully remove the existing switch from the switch box. GroundGreenWhiteNeutralRedLoad (to light fixture)BlackHot (from breaker)LED LightSwitch PaddleSupply Connection.....................................14 AWG wires, suitable for at least 75°CWire Strip Length.................................................................................16mm(5/8 in.)Screw Torque................................................................................................20 lbf-inInterchangeable Face CoverInterchangeable Color Face PlateTo replace the face cover, just use a flat screwdriver to pry-off the interchangeable plate.Voltage.............................................................................................. 120VAC, 60HzIncandescent..................................................................................................1000WResistive................................................................................................1800W(15A)Motor.............................................................................................................. 1/2 HPStandard Ballast............................................................................................1200VAElectronic Ballast...................................................................................................5AOperating Temperature.........................................................32°F~104°F(0°C~40°C)Protocol.........................................................................................IEEE 802.11b/g/nWireless Type.............................................................................................. 2.4GHzBe sure to read the instruction carefully before installation, and the manufacturer will not be responsible for any product damage that does not follow the instruction1. Wet hands are strictly prohibited.2. Must work strictly according to the rated load.3. Do not continue to work after self-disassembly of any nature and damage of external forces. After a power failure, the WF15S on/off switch returns to OFF state.Please Note:You can Turns your devices on or off at any time or anywhere have Internet usingthe free MyTS App on your smartphone.JWF15S1. Download MyTS app from the App Store or Google Play.2. Connect mobile device to your 2.4GHz WIFI network. Please note this switch can only be connected to 2.4GHz network.3. Launch MyTS and follow the in-app instructions to connect the switch to your network.MyTS App Controla. Login the MyTS, you need create a new account then sign in.
-05--04- INSTALLATION INSTRUCTIONS WARRANTY INFORMATIONOur company warranties its products to be free of defects in materials and workman-ship for a period of two (2) years. There are no obligations or liabilities on the part use or performance of this product or other indirect damages with respect to lossof property, revenue, or profit, or cost of removal, installation or reinstallation.of our company for consequential damages arising out of or in connection with theJun, 2018b. Click the button “+” then enter your WIFI paaswordc. Pls tap the JWF15S up paddle above 10 seconds until the blue LED is in a quick flashing state, then this switch can be added successfully.d. Pls select this switch and then click the "Connect" button then finished . Click the you can turn on or off the swich.Click the you can edit this swich device.1. During the process of adding device, you must select the correct name of WIFI Please Note:2. Now, this WIFI Switch can only be paired with one phone device.router and fill in the correct WIFI password, otherwise the device will not be ableto add successfully.LED INDICATIONConnecting to the network.Quick Flashing in Blue: Blue LED keep lighting: Connected to the network.Solid Blue:Off: The WIFI Switch is switched on.The WIFI Switch is switched off. FCC COMPLIANCE STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This cause undesired operation.device must accept any interference received, including interference that may FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an RF Exposure: A distance of 20 cm shall be maintained between the antennauncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.and users, and the transmitter module may not be co-located with any other transmitter or antenna. Federal Communication Commission Interference StatementThe equipment has been tested and found to comply with the limits for a class B B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation. This equipment uses, generates and can radiate radio frequency energy and, if notinstalled and used in accordance with the instruction, may cause harmful interferenceoccur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipmentto radio communication. However, there is no guarantee that interference will notoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.FCC Caution:Non-modification Statement:Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
INSTALLATION INSTRUCTIONS -02- -03--01- DESCRIPTION FEATURES JWF15S-3WOn/Off Switch  SPECIFICATIONS INSTALLATIONSingle Switch Wiring SchematicWiring Diagram:WARNINGS AND CAUTIONS6. Check connections to be sure they are tight and no bare conductors are exposed.7. Insert the JWF15S-3W switch into the standard outlet box carefully.8. Make sure the JWF15S-3W switch to the box using the supplied screws.9. Attach the wall plate.10. Restore power at the circuit breaker and test the system.White (Neutral)Red(Load)Green (Ground)Black (Line/Hot)Wireless Home Automation Control Device OPERATIONS Manual ControlThe switch paddle on the JWF15S-3W allows the user to:1, Turn ON/OFF the connected lighting.1, To turn the connected lighting ON: Tap the top of the switch paddle.2, To turn the connected lighting OFF: Tap the bottom of the switch paddle.Perfect Replacement for regular wall switch, 120VAC, 15Amp Manual and Remote ON/OFF control of any connected lighting and other electricalelectrical loadCan be used for signal pole or 3- Way (Multi-location) with Auxiliary Switch (sold The JWF15S-3W ON/OFF Switch is a perfect wireless manual and remote on/off control replacement of regular wall switch, controlling incandescent, LED, fluorescent, ballast and so on. This JWF15S-3W ON/OFF Switch works with 3-Way Auxiliary 4. Disconnect the wiring from the existing switch.5. Connect this JWF15S-3W switch as shown in the wiring diagram: Black lead to hot wire, white lead to neutral wire, red lead to load wire, green lead to ground wire.1.WARNING : To avoid fire, shock, or death. High Voltage - Turn off power at circuitbreaker or fuse and test that power is off before wiring.2. Remove wall plate and existing switch mounting screws.3. Carefully remove the existing switch from the switch box. Traveler works with 3-way Auxiliary Switch control( sold separately).YellowGroundGreenTravelerWhiteNeutralRedLoad (to light fixture)BlackHot (from breaker)LED LightSwitch PaddleSupply Connection.....................................14 AWG wires, suitable for at least 75°CWire Strip Length.................................................................................16mm(5/8 in.)Screw Torque................................................................................................20 lbf-inInterchangeable Face CoverInterchangeable Color Face PlateTo replace the face cover, just use a flat screwdriver to pry-off the interchangeable plate.Voltage.............................................................................................. 120VAC, 60HzIncandescent..................................................................................................1000WResistive................................................................................................1800W(15A)Motor.............................................................................................................. 1/2 HPStandard Ballast............................................................................................1200VAElectronic Ballast...................................................................................................5AOperating Temperature.........................................................32°F~104°F(0°C~40°C)Protocol.........................................................................................IEEE 802.11b/g/nWireless Type.............................................................................................. 2.4GHzyour home, condominiums and apartment. Switch that reducing energy consumption, enhancing the value of technology of Be sure to read the instruction carefully before installation, and the manufacturer will not be responsible for any product damage that does not follow the instruction1. Wet hands are strictly prohibited.2. Must work strictly according to the rated load.3. Do not continue to work after self-disassembly of any nature and damage of external forces. After a power failure, the WF15S-3W on/off switch returns to OFF state.Please Note:separately)White(Netural)Red(Load)Traveler(Yellow)SWITCHGreen(Groud)Black(Hot)White(Netural)Traveler(Yellow) Red(Load)SWITCHBlack(Hot)Green(Groud)White(Netural)Traveler(Yellow) Red(Load)SWITCHBlack(Hot)Green(Groud)Wiring Method 1 Wiring Method 2Wiring Method 3You can Turns your devices on or off at any time or anywhere have Internet usingthe free MyTS App on your smartphone.JWF15S-3WJWF15S-3W3-Way Wiring Schematic using one JWF15S and one 3-way Auxiliary Switch1. Download MyTS app from the App Store or Google Play.2. Connect mobile device to your 2.4GHz WIFI network. Please note this switch can only be connected to 2.4GHz network.3. Launch MyTS and follow the in-app instructions to connect the switch to your network.MyTS App ControlJWF15S-3WJWF15S-3W
-05--04- INSTALLATION INSTRUCTIONS WARRANTY INFORMATIONOur company warranties its products to be free of defects in materials and workman-ship for a period of two (2) years. There are no obligations or liabilities on the part use or performance of this product or other indirect damages with respect to lossof property, revenue, or profit, or cost of removal, installation or reinstallation.of our company for consequential damages arising out of or in connection with theJun, 2018a. Login the MyTS, you need create a new account then sign in.b. Click the button “+” then enter your WIFI paaswordc. Pls tap the JWF15S-3W up paddle above 10 seconds until the blue LED is in a quick flashing state, then this switch can be added successfully.d. Pls select this switch and then click the "Connect" button then finished . Click the you can turn on or off the swich.Click the you can edit this swich device.1. During the process of adding device, you must select the correct name of WIFI Please Note:2. Now, this WIFI Switch can only be paired with one phone device.router and fill in the correct WIFI password, otherwise the device will not be ableto add successfully.LED INDICATIONConnecting to the network.Quick Flashing in Blue: Blue LED keep lighting: Connected to the network.Solid Blue:Off: The WIFI Switch is switched on.The WIFI Switch is switched off. FCC COMPLIANCE STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This cause undesired operation.device must accept any interference received, including interference that may FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an RF Exposure: A distance of 20 cm shall be maintained between the antennauncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.and users, and the transmitter module may not be co-located with any other transmitter or antenna. Federal Communication Commission Interference StatementThe equipment has been tested and found to comply with the limits for a class B B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation. This equipment uses, generates and can radiate radio frequency energy and, if notinstalled and used in accordance with the instruction, may cause harmful interferenceoccur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipmentto radio communication. However, there is no guarantee that interference will notoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.FCC Caution:Non-modification Statement:Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Navigation menu