WENZHOU MTLC ELECTRIC APPLIANCES WF10FPM WIFI Smart Plug Outlet User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3909641
Application ID	h+GVunW2AhajIhgxCthD4w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	323.79kB (4047399 bits)
Date Submitted	2018-07-03 00:00:00
Date Available	2018-07-04 00:00:00
Creation Date	2018-07-03 10:42:51
Producing Software	Adobe Acrobat 10.0 Image Conversion Plug-in
Document Lastmod	2018-07-03 10:42:51
Document Title	Users Manual
Document Creator	Adobe Acrobat 10.0

INSTALLATION INSTRUCTIONS
WF10FPM
WIFI Smart Plug Outlet
Power] Pro ram Button
9 SPECIFICATIONS
Voltage ........................................................... 120V~60Hz
Resistive ..... 10A
Protocol. EEE 802.11b/g/n
\Mreless Type ........... 2.4GHz
System Requirements .................... Android 4.1 or higher,
iOS 8 or higher
Operating Temperature ............... 32°F~104°F(0°C~40°C)
9 FEATURES
0 Vou can control lights. fans. humidifiers. Air conditioner.
and any small appliances in accordance with the Smart
Plug’s specifications.
0 You can Turns your devices on or off at any time or any
where have Internet using the free Tuya Smart App on
your smartphone.
' You can efficiently conserve energy and save money
while using this Smart Plugs.
0 Compatible with the Amazon Echo, the free Tuya app
compatible with any Android (4.1 and higher) or iOS
(iOS 8 and higher) smartphone.
Q DESCRIPTION
The WF10FPM Plug is our industry's first WIFI Smart Plug
outlet, that can make our life more convenient. When the
control devices connected to the Smart Plug, whenever or
wherever you have Internet With the free Tuya Smart app
on your smartphone ortablets to control your device on
and off or according to your specific schedules to simulate
occupancy or countdown timer enhances safety when you
are away from home.
.01.
O MEASURE THE ENERGY USAGE
The WF10FPM Vlfifi smart plug outlet enables you to measure
the energy usage of your appliance. When added to Tuya
Smart App, it can display actual consumption(in W) and the
accumulated power used (in kWh) in the Tuya Smart App.
0 INITIAL SETUP
1. Download Tuya Smart app from the App Store or
Google Play.
2. Connect mobile device to your 2,4GHz WIFI network,
pls note this Smart plug can only connect to 2,4GHZ
network,
go a
3. Launch Tuya and follow the ineapp instructions to
connect the Smart Plug to your network.
a. Login the Tuya b. Click the button “+"
(any W (M- /+
u: Devlc:
In a
d. Click the bottom button
.02.
f, Finished
e Enter your Wifi password
4 When the device is finished add, this WIFI Smart Plug
can be opened, closed, countdown and timing.
Please Note:
1. In the process oi adding device, you must correctly select
the router's WIFI device name and fill in the correct WIFI
password, othen/vise the device will not be able to add
successfully.
2. This Smart Plug can only be paired with one phone
device. If you want multiple phones to control the WIFI
Smart Plug, click the "profile" then chose the " Device
Sharing".
me + m aim m, Wm“
m Device
No signs lecu
INSTALLATION INSTRUCTIONS
3, When the device fail to add in the App, please try to
enter the AF mode. Before enter the AF mode please
press and hold the button 10 times , then the LED
indicator in green and slowly blinks.
<7.“ W, or.“ (w mm“,
o OPERATION
o Press the button, power on then the LED(B|ue)
turned on.
0 Press the button again. power off then the LED
turned off.
0 Press and hold (for 5 seconds) until the Wi-Fi
LED quick blinks Green to initiate the App-Config
process.
0 Press and hold (for 5 seconds) until the N-Fi LED
blinks green to factory reset this Smart Plug.
.04.
9 LED INDICATION
Quick Blinking Green: Connecting to the network.
Slow Blinking Green: AP mode.
Green bright after 2 seconds off:
Connected to the network.
Soild Green: Network normaly or in standby mode
Solid Blue: The WIFI Smart Plug is switched on
Off: The WIFI Smart Plug is switched off
0 F00 WIPLIANCE STATENENT
Federal Communication Commission
Interference Statement:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications, However,
there is no guarantee that interference will not occur in a
aparticular installation. If this equipment does cause harmful
interference to radio ortelevision reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
0 Reorient or relocate the receiving antenna.
0 Increase the separation between the equipment
and receiver,
0 Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
0 Consult the dealer or an experienced radio/TV
technician for help.
.05.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: 1.
This device may not cause interference, and 2 This
device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies wrth FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
RF Exposure: A distance of 20 cm shall be maintained
between the antenna and users, and the transmitter
module may not be co-located with any other transmitter
or antenna,
0 WARRANTY INFORMATION
Our company warranties this product to be free of defects
in materials and workmanship for a period of two(2) years.
There are no obligations or liabilities on the part of our
company for consequential damages arising out of. or in
connection with, the use or performance of this product
or other indirect damages with respect to loss of property,
revenue or profit, or cost of removal, installation or re
installation
Jul. 2018
20180702-90012

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2018:07:03 10:42:51+08:00
Creator                         : Adobe Acrobat 10.0
Modify Date                     : 2018:07:03 10:42:51+08:00
Title                           : 
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2018:07:03 10:42:51+08:00
Creator Tool                    : Adobe Acrobat 10.0
Format                          : application/pdf
Document ID                     : uuid:2dc97bb3-8b98-4e7d-bcf0-162f093427c4
Instance ID                     : uuid:37e07293-34e1-4ecd-bfc7-76fbff9bc6e1
Producer                        : Adobe Acrobat 10.0 Image Conversion Plug-in
Page Count                      : 2

EXIF Metadata provided by EXIF.tools