WENZHOU MTLC ELECTRIC APPLIANCES WF15S On/Off Switch User Manual

WENZHOU MTLC ELECTRIC APPLIANCES CO., LTD. On/Off Switch Users Manual

Users Manual

Download: WENZHOU MTLC ELECTRIC APPLIANCES WF15S On/Off Switch User Manual
Mirror Download [FCC.gov]WENZHOU MTLC ELECTRIC APPLIANCES WF15S On/Off Switch User Manual
Document ID3905698
Application IDDJFpTzCwi23oDsEHkZq6+w==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize227.97kB (2849602 bits)
Date Submitted2018-06-29 00:00:00
Date Available2018-06-29 00:00:00
Creation Date2018-06-27 15:20:07
Producing SoftwareAcrobat Distiller 7.0 for Macintosh
Document Lastmod2018-06-27 15:20:18
Document TitleUsers Manual
Document CreatorAdobe PageMaker 6.52
Document Author: YB

INSTALLATION INSTRUCTIONS
WF15S
Manual Control
White (Neutral)
The switch paddle on the WF15S allows the user to:
Wireless Home Automation Control Device
Interchangeable Face Cover
On/Off Switch
Red
(Load)
1, Turn ON/OFF the connected lighting.
1, To turn the connected lighting ON: Tap the top of the switch paddle.
WF15S
2, To turn the connected lighting OFF: Tap the bottom of the switch paddle.
Please Note: After a power failure, the WF15S on/off switch returns to OFF state.
Green (Ground)
Tuya Smart App Control
1. Download Tuya Smart app from the App Store or Google Play.
Black (Line/Hot)
 SPECIFICATIONS
Wiring Diagram:
Voltage.............................................................................................. 120VAC, 60Hz
Incandescent..................................................................................................1000W
Electronic Ballast...................................................................................................5A
Standard Ballast............................................................................................1200VA
Resistive................................................................................................1800W(15A)
Motor.............................................................................................................. 1/2 HP
Operating Temperature.........................................................32°F~104°F(0°C~40°C)
Wire Strip Length.................................................................................16mm(5/8 in.)
Supply Connection.....................................14 AWG wires, suitable for at least 75°C
Screw Torque................................................................................................20 lbf-in
Protocol.........................................................................................IEEE 802.11b/g/n
Wireless Type.............................................................................................. 2.4GHz
2. Connect mobile device to your 2.4GHz WIFI network. Please note this
Red
Smart outlet can only be connected to 2.4GHz network.
Load (to light fixture)
Green
Ground
White
Black
Neutral
Hot (from breaker)
3. Launch Tuya and follow the in-app instructions to connect the WIFI outlet
to your network.
 FEATURES
a. Login the Tuya
Perfect Replacement for regular wall switch, 120VAC, 15Amp
1.WARNING : To avoid fire, shock, or death. High Voltage - Turn off power at circuit
Manual and Remote ON/OFF control of any connected lighting and other electrical
electrical load
You can Turns your devices on or off at any time or anywhere have Internet using
the free Tuya App on your smartphone
Interchangeable Color Face Plate
breaker or fuse and test that power is off before wiring.
2. Remove wall plate and existing switch mounting screws.
 DESCRIPTION
white lead to neutral wire, red lead to load wire, green lead to ground wire.
6. Check connections to be sure they are tight and no bare conductors are exposed.
The WF15S ON/OFF Switch is a perfect wireless manual and remote on/off control
replacement of regular wall switch, controlling incandescent, LED, fluorescent, ballast
and so on.
WARNINGS AND CAUTIONS
Be sure to read the instruction carefully before installation, and the manufacturer
will not be responsible for any product damage that does not follow the instruction
b. Click the button “+”
3. Carefully remove the existing switch from the switch box.
4. Disconnect the wiring from the existing switch.
5. Connect this WF15S switch as shown in the wiring diagram: Black lead to hot wire,
7. Insert the WF15S switch into the standard outlet box carefully.
8. Make sure the WF15S switch to the box using the supplied screws.
9. Attach the wall plate.
10. Restore power at the circuit breaker and test the system.
d. Click the bottom button
e. Enter your Wifi password
OPERATIONS
1. Wet hands are strictly prohibited.
2. Must work strictly according to the rated load.
Switch Paddle
3. Do not continue to work after self-disassembly of any nature and damage of
external forces.
LED Light
To replace the face
cover, just use a
flat screwdriver to
pry-off the
interchangeable plate.
 INSTALLATION
Single Switch Wiring Schematic
-01-
c. Select the "Electrical outlet"
-02-
-03-
f. Finished
INSTALLATION INSTRUCTIONS
4. When the device is finished add, this WIFI Outlet can be opened, closed,
countdown and timing.
OPERATION AND LED INDICATION
Quick Blinking Green: Connecting to the network.
Slow Blinking Green: AP mode.
Green bright after 2 seconds off: Connected to the network.
Soild Green: Network normaly or in standby mode.
Solid Blue: The WIFI Switch is switched on.
Off: The WIFI Switch is switched off.
WARRANTY INFORMATION
Our company warranties its products to be free of defects in materials and workman
-ship for a period of two (2) years. There are no obligations or liabilities on the part
of our company for consequential damages arising out of or in connection with the
use or performance of this product or other indirect damages with respect to loss
of property, revenue, or profit, or cost of removal, installation or reinstallation.
Jun, 2018
FCC COMPLIANCE STATEMENT
20180614-90014
Federal Communication Commission Interference Statement
The equipment has been tested and found to comply with the limits for a class B
B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
Please Note:
This equipment uses, generates and can radiate radio frequency energy and, if not
1. In the process of adding device, you must correctly select the router's WIFI
device name and fill in the correct WIFI password, otherwise the device will
not be able to add successfully.
2. This WIFI Outlet can only be paired with one phone device. If you want
multiple phones to control the WIFI Outlet, click the "profile" then chose
the " Device Sharing".
installed and used in accordance with the instruction, may cause harmful interference
to radio communication. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1. This device may not cause interference, and 2. This
device must accept any interference received, including interference that may
cause undesired operation.
3. When the device fail to add in the App, please try to enter the AP mode.
Before enter the AP mode please press the top or bottom button 5 times
continuously, then press and hold at the sixth for 5 seconds then release,
the LED indicator in green and slowly blinks.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
RF Exposure: A distance of 20 cm shall be maintained between the antenna
and users, and the transmitter module may not be co-located with any other
transmitter or antenna.
Non-modification Statement:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
-04-
-05-
INSTALLATION INSTRUCTIONS
WF15S-3W
Wireless Home Automation Control Device
Interchangeable Face Cover
On/Off Switch
 INSTALLATION
1.WARNING : To avoid fire, shock, or death. High Voltage - Turn off power at circuit
Single Switch Wiring Schematic
breaker or fuse and test that power is off before wiring.
2. Remove wall plate and existing switch mounting screws.
White (Neutral)
3. Carefully remove the existing switch from the switch box.
4. Disconnect the wiring from the existing switch.
Red
(Load)
5. Connect this WF15S-3W switch as shown in the wiring diagram: Black lead to hot
wire, white lead to neutral wire, red lead to load wire, green lead to ground wire.
6. Check connections to be sure they are tight and no bare conductors are exposed.
WF15S-3W
Green (Ground)
7. Insert the WF15S-3W switch into the standard outlet box carefully.
8. Make sure the WF15S-3W switch to the box using the supplied screws.
9. Attach the wall plate.
10. Restore power at the circuit breaker and test the system.
Black (Line/Hot)
 SPECIFICATIONS
Voltage.............................................................................................. 120VAC, 60Hz
Incandescent..................................................................................................1000W
Electronic Ballast...................................................................................................5A
Standard Ballast............................................................................................1200VA
Resistive................................................................................................1800W(15A)
Motor.............................................................................................................. 1/2 HP
Operating Temperature.........................................................32°F~104°F(0°C~40°C)
Wire Strip Length.................................................................................16mm(5/8 in.)
Supply Connection.....................................14 AWG wires, suitable for at least 75°C
Screw Torque................................................................................................20 lbf-in
Protocol.........................................................................................IEEE 802.11b/g/n
Wireless Type.............................................................................................. 2.4GHz
 FEATURES
3-Way Wiring Schematic using one WF15S-3W and one 3-way Auxiliary Switch
White(Netural)
Traveler(Yellow)
Traveler(Yellow)
Red(Load)
Red(Load)
Switch Paddle
WF15S-3W
WF15S-3W
SWITCH
SWITCH
LED Light
To replace the face
cover, just use a
flat screwdriver to
pry-off the
interchangeable plate.
Green(Groud)
Green(Groud)
Black(Hot)
Black(Hot)
Perfect Replacement for regular wall switch, 120VAC, 15Amp
Wiring Method 2
White(Netural)
Manual and Remote ON/OFF control of any connected lighting and other electrical
electrical load
Can be used for signal pole or 3- Way (Multi-location) with Auxiliary Switch (sold
separately)
Manual Control
Traveler(Yellow)
Red(Load)
The switch paddle on the WF15S-3W allows the user to:
1, Turn ON/OFF the connected lighting.
WF15S-3W
1, To turn the connected lighting ON: Tap the top of the switch paddle.
SWITCH
You can Turns your devices on or off at any time or anywhere have Internet using
the free Tuya App on your smartphone
Interchangeable Color Face Plate
2, To turn the connected lighting OFF: Tap the bottom of the switch paddle.
Green(Groud)
Please Note: After a power failure, the WF15S-3W on/off switch returns to OFF state.
Black(Hot)
 DESCRIPTION
Tuya Smart App Control
Wiring Method 3
WARNINGS AND CAUTIONS
OPERATIONS
White(Netural)
Wiring Method 1
The WF15S-3W ON/OFF Switch is a perfect wireless manual and remote on/off
control replacement of regular wall switch, controlling incandescent, LED, fluorescent,
ballast and so on. This WF15S-3W ON/OFF Switch works with 3-Way Auxiliary
Switch that reducing energy consumption, enhancing the value of technology of your
home, condominiums and apartment.
1. Download Tuya Smart app from the App Store or Google Play.
Traveler works with 3-way Auxiliary Switch control( sold separately).
Wiring Diagram:
Red
Yellow
Traveler
Load (to light fixture)
2. Connect mobile device to your 2.4GHz WIFI network. Please note this
Be sure to read the instruction carefully before installation, and the manufacturer
will not be responsible for any product damage that does not follow the instruction
Green
Smart outlet can only be connected to 2.4GHz network.
Ground
1. Wet hands are strictly prohibited.
2. Must work strictly according to the rated load.
3. Do not continue to work after self-disassembly of any nature and damage of
external forces.
-01-
White
Black
Neutral
Hot (from breaker)
-02-
-03-
INSTALLATION INSTRUCTIONS
3. Launch Tuya and follow the in-app instructions to connect the WIFI outlet
a. Login the Tuya
Please Note:
FCC COMPLIANCE STATEMENT
c. Select the "Electrical outlet"
to your network.
1. In the process of adding device, you must correctly select the router's WIFI
b. Click the button “+”
device name and fill in the correct WIFI password, otherwise the device will
not be able to add successfully.
2. This WIFI Outlet can only be paired with one phone device. If you want
multiple phones to control the WIFI Outlet, click the "profile" then chose
the " Device Sharing".
Federal Communication Commission Interference Statement
The equipment has been tested and found to comply with the limits for a class B
B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment uses, generates and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference
to radio communication. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
d. Click the bottom button
e. Enter your Wifi password
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
f. Finished
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
3. When the device fail to add in the App, please try to enter the AP mode.
Before enter the AP mode please press the top or bottom button 5 times
continuously, then press and hold at the sixth for 5 seconds then release,
the LED indicator in green and slowly blinks.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1. This device may not cause interference, and 2. This
device must accept any interference received, including interference that may
cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
4. When the device is finished add, this WIFI Outlet can be opened, closed,
countdown and timing.
with minimum distance 20cm between the radiator & your body.
RF Exposure: A distance of 20 cm shall be maintained between the antenna
and users, and the transmitter module may not be co-located with any other
transmitter or antenna.
Non-modification Statement:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
OPERATION AND LED INDICATION
Quick Blinking Green: Connecting to the network.
Slow Blinking Green: AP mode.
Green bright after 2 seconds off: Connected to the network.
Soild Green: Network normaly or in standby mode.
Solid Blue: The WIFI Switch is switched on.
Off: The WIFI Switch is switched off.
-04-
-05-
WARRANTY INFORMATION
Our company warranties its products to be free of defects in materials and workman
-ship for a period of two (2) years. There are no obligations or liabilities on the part
of our company for consequential damages arising out of or in connection with the
use or performance of this product or other indirect damages with respect to loss
of property, revenue, or profit, or cost of removal, installation or reinstallation.
Jun, 2018

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : YB
Create Date                     : 2018:06:27 15:20:07+08:00
Modify Date                     : 2018:06:27 15:20:18+08:00
Subject                         : 
Title                           : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2018:06:27 15:20:18+08:00
Creator Tool                    : Adobe PageMaker 6.52
Format                          : application/pdf
Creator                         : YB
Document ID                     : uuid:662761da-fa31-48f2-8566-32203890a2e9
Instance ID                     : uuid:0ca5be59-e3e9-49cb-84b9-c6db173f51c1
Producer                        : Acrobat Distiller 7.0 for Macintosh
Page Count                      : 4
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ZZH-WF15S

Navigation menu