WENZHOU MTLC ELECTRIC APPLIANCES WF500D Dimmer Switch User Manual

WENZHOU MTLC ELECTRIC APPLIANCES CO., LTD. Dimmer Switch Users Manual

Users Manual

WIFI Control DeviceINSTALLATION INSTRUCTIONS -03--01- DESCRIPTIONFEATURES WF500DVoltage...............................................................................................120VAC, 60HzIncandescent.....................................................................................................600WOperating Temperature.........................................................32°F~104°F(0°C~40°C)SPECIFICATIONS-02-Wireless Home Automation Perfect Replacement for regular wall ON/OFF & Dim switch, 120VACManual and Remote ON/OFF& Dim control of any permanently installed incandescent, dimmable LED and CFL lamp fixturePreset light level option allows the dimmer will turn on to the light level that it wasadjusted to the previous time when the light was onThe WF500D Dimmer Switch is a perfect wireless manual and remote on/off/ dimbright control replacement of regular on/off and dimmer switch, controlling incandescent, dimmable LED and CFL. Sliding Air-Gap switch to a totally disconnect power while1. WARNING : To avoid fire, shock, or death. High Voltage - Turn off power at circuitbreaker or fuse and test that power is off before wiring.3. Remove wall plate and existing switch mounting screws.4. Carefully remove the existing switch from the switch box. 5. Disconnect the wiring from the existing switch.6. Connect the dimmer switch as shown in the wiring diagram: Black lead to hotwire, white lead to neutral wire, red lead to load wire, green lead to ground wire.7. Check connections to be sure they are tight and no bare conductors are exposed.8. Insert the WF500D dimmer switch into the standard outlet box carefully.9. Make sure the WF500D dimmer switch to the box using the supplied screws.10. Attach the wall plate.11. Restore power at the circuit breaker and test the system.circuit wiring and circuit loading. No specific recommendation on product selection and there are no warranties of performance or compatibility implied.Supply Connection...............................................................................14 AWG wiresWire Strip Length..................................................................................16mm(5/8 in.)Screw Torque.................................................................................................20 lbf-inLED dimming performance may vary based upon dimmer type, model, manufacturer,Air Gap SwitchDuring normal operation, there is a small amount of power passing through the switch to the load even when the dimmer switch is turned off. The WF500D has an air gap switch on the lower right side to completely disconnect power to the load.for the dimmer to function and control the lighting.Slide the air gap switch to left to disconnect the power while replacing light bulbsand slide it to right for normal operation. The air gap switch must be all the way in Air-Gap Switch feature meets UL requirement and disconnect power from loadlocally.replacing light bulbs and preventing from leakage current from the fixture(s). TheWiring Diagram:GroundGreenRedLoad (to light fixture)BlackHot (from breaker)WhiteNeutralWARNINGS AND CAUTIONSINSTALLATIONThis WF500D dimmer switch may be used in new installations or replace an existingwall switch.LightTypical Dimmer Wiring Schematic:RedBlackGreenWhite120 VAC60 Hz  MULTIGANG INSTALLATION When installing more than one control in the same wall box, it may be necessary to remove the side tabs before installing (see below). Using pliers, bend each tab back and forth until they break off. Repeat for each tab to be removed. Removalof tabs WILL REDUCE MAXIMUM LOAD CAPACITY. Tabs Removed for Mulitgang installationDimmable LED/CFLLoad Capacity when Tabs are removed from: 0 Sides 1 Side 2 Sides150W 150W150WLED/CFL Derating ChartWhen using the Dimmer to control LED/CFL lights in conjunction with another Dimmerto control Incandescent /Halogen lights follow this Derating Chart for Maximum Capacitiy on EACH device. Then the Maximum COMBINED Wattaged for theIncandescent/Halogen bulbs on EACH attached dimmer: If NO Tabs areremoved then Max Wattage is: If 1 side of Tabs are removed then Max Wattage is: If 2 sides of Tabs are removed then Max Wattage is: 0W1-25W26-50W51-75W76-100W101-125W126-150W600W500W400W300W200W100W0W500W400W300W200W100W50W0W400W300W200W100W50W0W0W If the combinedWattage of ALL LED/CFL bulbs on 1 dimmer is: If you are using ONLY LED/CFL bulbs on ALL Dimmers, DO NOT USE this DeratingChart. Follow the LED/ CFL Derating Chart. CFL/LED/Electronic self-ballasted.............................................................2A (150W)Protocol...........................................................................................IEEE 802.11b/g/nWireless Type................................................................................................ 2.4GHzBe sure to read the instruction carefully before installation, and the manufacturer will not be responsible for any product damage that does not follow the instruction1. Wet hands are strictly prohibited.2. Must work strictly according to the rated load.3. Do not continue to work after self-disassembly of any nature and damage of external forces.LED indicatorDimmer Switch PaddleAir Gap Switch OPERATIONSDimmer Switch 2. CAUTION : To Reduce The Risk of Overheating and Possible Damage to Other Equipment, Do Not Install to Control a Receptacle, a Motor-Operated Appliance or a Fluorescent Lighting Fixture or a Transformer Supplied Appliance.
INSTALLATION INSTRUCTIONSLED INDICATIONApr, 20181. During the process of adding device, you must select the correct name of WIFI Please Note:Restoring Factory Defaults2. Now, this WIFI Dimmer is paired with one phone device. If you want to control " Device Sharing".Please note: pressing and holding the dimmer switch paddle until the light intensityis at the minimum setting does not turn the power OFF, you must still tap (shortpress) the bottom of the dimmer switch paddle to turn the power OFF.  WARRANTY INFORMATIONOur company warranties its products to be free of defects in materials and workman-ship for a period of two (2) years. There are no obligations or liabilities on the part use or performance of this product or other indirect damages with respect to loss ofproperty, revenue, or profit, or cost of removal, installation or reinstallation.of our company for consequential damages arising out of or in connection with theManual ControlThe WF500D dimmer switch allows the user to:Turn ON/OFF and control the brightness level of the connected lighting.1. To turn the connected lighting ON: Tap the top of the dimmer switch paddle. 2. To turn the connected lighting OFF: Tap the bottom of the dimmer switch paddle 3. To brighten the connected lighting: Press and hold the top of the dimmer switchpaddle, release when desired level is achieved.4. To dim the connected lighting: Press and hold the bottom of the dimmer switchpaddle, release when desired level is achieved. The LED indicator will be turned on in blue.again. The LED indicator will be turned off.Tuya Smart App Control1. Download Tuya Smart app from the App Store or Google Play.2. Connect mobile device to your 2.4GHz WIFI network. Please note thisSmart Dimmer Switch can only be connected to 2.4GHz network.3. Launch Tuya and follow the in-app instructions to connect the Smart Dimmer Switch to your network.a. Login the Tuya b. Click the button “+” c. Select the "Wall switch"d. Click the bottom button e. Enter your Wifi password f. Finished 4. When the device is added successfully, this WIFI Dimmer can be turned ON/OFFand dimmed.router and fill in the correct WIFI password, otherwise the device will not be ableto add successfully.the WIFI Dimmer by different phones, click the "profile" then chose the please press the top or bottom button 5 times continuously, then press and hold at the sixth time then release, the LED indicator in green and flashes quickly.Please Note:in green will flash quickly which means that the Dimmer is searching for WIFI. It willstop flashing and turn off when WIFI is connected successfully for 5 seconds. when-06--04- -05-20180426-00089When power is reconnected after the interruption, the LED indicatorThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This cause undesired operation.FCC COMPLIANCEdevice must accept any interference received, including interference that may When power on the device and confirm that indicator light if rapidly blinks, if not the LED indicator in solid green that means your network anomaly, pls check thenetwork.3. When the device fail to add in the App, please try to enter the AP mode. Before enter the AP mode please press the top or bottom button 5 times continuously, then press and hold at the sixth for 5 seconds then release, the LED indicator in green and slowly blinks.Connecting to the network.Quick Blinking Green:Green bright after 2 seconds off: Connected to the network.Solid Blue:Off: The WIFI Dimmer is switched on.The WIFI Dimmer is switched off.Soild Green: Network abnormaly .AP mode.Slow Blinking Green:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. RF Exposure: A distance of 20 cm shall be maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna. 

Navigation menu