WG security GUARD 58 kHz Electronic Article Surveillance System User Manual CommonPlatform PING 06250801

Download:
Mirror Download [FCC.gov]
Document ID	1050874
Application ID	11+NED0C7ooU67Cfw3QU+g==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	83.31kB (1041383 bits)
Date Submitted	2008-12-30 00:00:00
Date Available	2008-12-30 00:00:00
Creation Date	2008-06-25 13:15:00
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-06-25 13:15:00
Document Title	Microsoft Word - CommonPlatform-PING-06250801.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Owner

58Khz
Common Platform
EAS Systems
Installation Manual
April 2008
Manual Part Number: WG(Ver. 05040801)
WARRANTY DISCLAIMER
WG Security Products Inc. makes no representation or
warranty with respect to the contents hereof and
specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose.
Further, WG Security Products Inc. reserves the right
to revise this publication and make changes from time
to time in the content hereof without obligation of WG
Security Products Inc. to notify any person of such
revision or changes.
WG SECURITY PRODUCTS INC.
3031 Tisch Way, Suite 602, San Jose, CA 95128 (USA)
http://www.wgspi.com
Technical Support Contact Information
North America
South America
Tel:
Fax:
Email: support-usa@wgspi.com
Rest of World
Tel: 408-241-8000
Fax: 408-241-8082
Email: support-row@wgspi.com
CRITICAL NOTE
As specified by FCC Regulations 15.21, any
changes or modifications not expressly approved
by the party responsible for compliance of this
equipment, will void the user’s permission and
authority to operate this equipment.
TABLE OF CONTENTS
OVERVIEW .................................................................................................................. 1
System Overview ........................................................................................................ 1
System Configurations................................................................................................. 2
Product Names and Part Numbers ............................................................................... 3
Common Platform Features & Benefits ......................................................................... 4
Specifications (common parameters) ............................................................................ 5
COMMON PLATFORM ELECTRONICS ..................................................................... 6
Board Functions Description ........................................................................................ 6
PCB Sockets & Connections ........................................................................................ 7
PCB Jumpers ............................................................................................................. 8
Pedestal Tuning Access .............................................................................................. 9
Antenna Channels on Transceiver Board .................................................................... 10
Fuse Replacement Information (Transceiver PCB) ............................................... 11
SMART POWER SUPPLY (SPS) .............................................................................. 12
SPS Controls and Connections .................................................................................. 12
SPS Box Terminals Illustration ................................................................................... 13
SPS Box Main AC Input and Voltage Setup ................................................................ 14
Interconnection between Smart Power Supply and Pedestal ........................................ 15
Power Cord Notices ................................................................................................ 16
SPS Box External Relay interface .............................................................................. 17
Common Platform EAS Systems
OVERVIEW
System Overview
Note: Common Platform EAS Systems differ only in the antennas that are used. All
systems use a universal transceiver printed circuit board that performs all the
functions of transmitting, receiving and alarm notification. This manual applies to
AdGuard, AdGuard XL, Lane Guard and Diamond Door Guard.
The common platform line of products consist of one or more pedestals (transceiver antenna
and optional extender), and one external PSU unit (WG SPS24). The transceiver pedestal
has one universal transceiver board which transmits and receives utilizing highly advanced
signal process technology, offering unsurpassed stability and detection performance.
Transceiver PCB
24vac Smart Power Supply Unit
(SPS)
Transceiver Antenna and Extender
(AdGuard)
Detection Range on Both Sides of Antennas with Micro Pencil Tags
Antenna Type
Europe
USA
AdGuard
0.9 m
3 ft
AdGuard with Extender
TBD
TBD
AdGuard XL
1.4 m
4.5 ft
AdGuard XL with Extender
TBD
TBD
Lane Guard
0.9 m
3 ft
Diamond Door Guard
0.9 m
3 ft
Common Platform EAS Systems
System Configurations
Each transceiver pedestal is powered by its own dedicated SPS. The common platform SPS
not only provides 24vac power to the transceiver pedestal, but it includes some very important
features.
• Accepts a wide AC input voltage ranges
• Controls transmitter bursts for troubleshooting
• Adjusts pedestal alarm volume
• Provides alarm visual & audio indication and relay output
• Provides Jammer Detection alarm and relay output
24vac power and data/control is carried by a single TX cable from the SPS to the pedestal.
Each SPS is individually powered. This picture depicts and example where 4 power supplies
are integrated into a single industry standard rack with main power input and to which each
SPS is then connected.
AC Input
Example: AdGuard Transceiver Antennas
Pedestal A
Pedestal B
Pedestal C
Pedestal D
Power & Control
Caution! One SPS can only power only one transceiver pedestal.
The Common Platform Product Line includes any of the following antenna models.
AdGuard
AdGuard XL
Lane Guard
Diamond Door Guard
Common Platform EAS Systems
Product Names and Part Numbers
Accessories
Accessory Name
Order Number
1.
Smart Power Supply (SPS unit)
WG SPS24
2.
Instruction Manual
TBD
3.
Power Line Connector (2 pins)
TBD
4.
Communication Connector (4 pins)
TBD
5.
Laptop Tuning Software
(includes WG USB Cable)
TBD
6.
USB Tuning Cable
TBD
7.
WG IR Tuning Module
TBD
Antenna Name
Order Number
1.
AdGuard Transceiver Pedestal
WG AGTR24
2.
AdGuard Extender Pedestal
WG AGTR-EX
3.
AdGuard XL Transceiver Pedestal
WG AGXTR24
4.
AdGuard XL Extender Pedestal
WG AGXTR-EX
5.
Lane Guard Transceiver Pedestal
WG LGTR24
6.
Diamond Door Guard Transceiver
WG DG2TR24
Systems
Common Platform EAS Systems
Common Platform Features & Benefits
•
All-in-One platform design for the Acousto-Magnetic (AM) product line makes it a
perfect AM detection core solution for various antenna forms and needs. There are
visible advantages on short term and long term operation along with low cost
maintenance.
•
Unprecedented Digital Signal Processing Technology
The common platform line brings an ever advancing DSP technology to an
unprecedented level compared with traditional anti-theft solutions, eliminating false
alarms and maintaining a considerable detection range.
•
Universal Mobile PC Tuning Interface
Benefiting from its highly performance-rich digital processing controller, the common
platform can connect to laptop PC through the popular USB port.
•
Anti-Jammer Alarm
The Anti-Jammer alarm function addresses the modern high-tech theft actions that
defeat the Acousto-Magnetic detection system with DIY jamming devices. WG’s
common platform design detects and alerts security personnel as soon as the jammer
device attempts to defeat the transceiver pedestal.
•
Local and Remote Audible and Visual Notification
Alarm flexibility provides local alarming at the pedestal plus remote alarm notification
through the SPS via convenient visual and external ports.
•
Transceivers can be individually optimized for label or ferrite tag detection.
Common Platform EAS Systems
Specifications (common parameters)
Smart Power Supply (SPS) Electrical
100vac ±10 %
Primary Input
(Stepdown Transformer)
110vac ±10 %
120vac ±10 %
220vac ±10 %
240vac ±10 %
Secondary Output
26Vac ±5 %
Rated Output Current
1.4A ±5 %
Maximum Secondary
Output Current
1.9 A
Built-in Fuse (self recovery)
500mA
Smart Power Supply (SPS) Mechanical
Height
80mm ( 3.15” )
Width
110mm ( 4.33” )
Thickness
140mm ( 5.5” )
Weight
3 Kg ( 6.6 lbs)
Environmental (Pedestals and SPS)
Operating Temperature
TBD °C (°F)
Relative Humidity
0 to 85% non-condensing
Mechanical (Pedestals)
AdGuard Pedestal
66”H x 12.6”W x 3”D (166 x 33 x 7.6cm)
Weight (TBD)
AdGuard XL Pedestal
66”L x 18.5”W x 3.54”H (166 x 48 x 8.6cm)
Weight (TBD)
Lane Guard
(w/o brackets)
52.8”L x 14.4”W x 1.5”H (134 x 36.7 x 3.8cm)
Weight (TBD)
Diamond Door Guard
59”L x 12.2”W x 2”H(150 x 31 x 5cm)
Weight (TBD)
Common Platform EAS Systems
COMMON PLATFORM ELECTRONICS
Board Functions Description
Receiver Area
External Sockets
Antenna Sockets
Transmitter
Transformer
Common Platform EAS Systems
PCB Sockets & Connections
Board Power Input Fuse
2-Pin Power Connector
Pin1
Pin2
Pin3
Pin4
Pin5
Pin6
Pin #
Function
I/O
GND
Common
GND
24VAC
26vac±5%
TX OFF
Output
Alarm
Input
AntiJammer
Input
Alarm
Volume
Output
4-Pin Control Connector
Pedestal Local Alarm and LED Connector
USB connection cable
or IR Tuning Module
Common Platform EAS Systems
PCB Jumpers
There is only one set of Jumper that is subject to User’s configuration; all other jumpers
please keep them as original as system is delivered.
■
■
■
■
■
■
■
■
Jumper Configurations
Ferrite and Resonator Setting
Gain Settings
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
LSB
Empty:
Ferrite and
Resonator
Gain Value
Lookup
Table
Binary
Decimal
Gain value
W/ Jumper:
Resonator
ONLY
■■■
■■■
000
■■■
■■■
100
All Empty:
Board Software
Controlled Gain
W/ Jumpers:
Jumpers
Controlled Gain
■■■
■■■
■■■
■■■
■■■
■■■
010
110
001
MSB
■■■
■■■
101
■■■
■■■
011
Common Platform EAS Systems
Pedestal Tuning Access
Common Platform systems include advanced tuning features that offer the technician a
choice of access. There is a connector on the Transceiver PCB for tuning access. The
installer can connect to the pedestal using a laptop PC with a WG USB cable or attach an
external IR tuning and display module. The same dedicated tuning connector on the
transceiver board accepts both the WG USB cable and external IR tuning and display module.
WG USB Cable
WG IR Module
Laptop PC
IR Module
Pedestal tuning access using the WG
IR tuning module offers the external
display interface and traditional
remote control interface.
Pedestal tuning access using a laptop
PC is through the WG USB cable.
Laptop tuning software with WG USB cable and IR Tuning Module are
optional and must be ordered separately from WG Security Products.
Common Platform EAS Systems
Antenna Channels on Transceiver Board
TX-B
To Loop Antenna
TX-A
To Figure 8 Antenna
Receiver Connectors
TX-A and TX-B sockets connect to the two types of coil antennas.
They must not be transposed; strictly follow the illustration.
10
Common Platform EAS Systems
Fuse Replacement Information (Transceiver PCB)
The fuse holder is accessed through the pedestal side panel.
1. Equipment shall be electrically disconnected from
the main circuit supply when replacing the fuse.
2. Remove the fuse holder with a screwdriver,
rotating it in a counterclockwise direction.
3. Replace the fuse in accordance with the
specification noted above.
Fuse Replacement:
5mm x 20mm
3.15A (Normal Fuse)
2.5A (Slow Blow Fuse)
WARNING – TO REDUCE THE RISK OF DAMAGE, REPLACE ONLY WITH
THE SAME FUSE TYPE AND RATING.
11
Common Platform EAS Systems
SMART POWER SUPPLY (SPS)
SPS Controls and Connections
SPS Front View
SPS Power
On/Off Switch
SPS Top View
Input Voltage
Select Switch A
Main AC Power In
TX Antenna
On/Off Switch
Pedestal Alarm
Volume Adjust
24vac
Power & Data
Output
SPS Rear View
Input Voltage
Select Switch B
12
Common Platform EAS Systems
SPS Box Terminals Illustration
SPS Main AC Input Terminal Layout
Main AC Cable (3 wires)
Pin Function Color
Neutral
Blue
Ground
Green w/Yellow Stripe
Live
Red(Brown)
N - GND - L
Pin:
Main AC
Input
Terminal
LED Status
Pin:
LED
On
Off
TX Off
TX is Off
TX is On
System
Alarm
Alarm
Enabled
Alarm
Disabled
Jammer
Detection
Detection
Enabled
Detection
Disabled
Alarm
Volume
Dim Means
Weaker
Bright Means
Louder
10
SPS Output Terminal Layout (10 pins)
SPS to Pedestal Cable (6 wires)
Alarm
Relay
Jammer
Relay
Pin #
Function
GND
24VAC
TX OFF
Alarm
AntiJammer
Alarm
Volume
Electrical
Common
GND
26
VAC
>4.0vdc
<2.5vdc
<2.5vdc
5-15vdc
1A
Contact
1A
Contact
I/O
Output
Output
Output
Input
Input
Output
Output
Output
13
10
Common Platform EAS Systems
SPS Box Main AC Input and Voltage Setup
The Smart Power Supply (SPS) box accepts 5 input voltages: 100vac 110vac and 120vac in
North America and Japan, 220vac and 240vac in Europe and Australia.
Caution: Set the two Voltage Switches (A and B) o n the SPS at the specified
combination based on the local incoming voltage value (see picture below).
AC Power In
Voltage Switch A
Voltage Switch B
HIGH MID LOW
(Three Positions)
100vac
Voltage Switch A - 115
220vac
Voltage Switch A - 230
Voltage Switch B - LOW
Voltage Switch B - MIDDLE
110vac
Voltage Switch A - 115
240vac
Voltage Switch A - 230
Voltage Switch B - MIDDLE
Voltage Switch B - HIGH
120vac
Voltage Switch A - 115
Voltage Switch B - HIGH
14
Common Platform EAS Systems
Interconnection between Smart Power Supply and Pedestal
The system transceiver board has two sockets (combined pins 1 to 6) that connect to SPS
output terminal pins 1 to 6 (one-to-one pin connection). The reference diagram shows the pin
mapping relation between transceiver board and PSU.
Isolated Multiple Conductor Cable
Pin 1
Pin 1
Un-Shielded
Pin 6
Pin 6
Caution! One SPS can power
only one transceiver pedestal.
Cable Conductors Specifications
Note: Specifications are calculated at 30 meters (100 feet) length.
Pin
Conductors
Gauge
AWG
Conductor 1
1 mm 2
16
Power (Common Ground)
Conductor 2
1 mm 2
16
Power (26 Vac)
Conductor 3
0.5 mm 2
20
TX OFF
Conductor 4
0.5 mm 2
20
Alarm
Conductor 5
0.5 mm 2
20
Jammer-Detection
Conductor 6
0.5 mm 2
20
Alarm Volume
15
Description
Common Platform EAS Systems
Power Cord Notices
The SPS delivered does not include AC cable for installation except a short testing cable; we
recommend that you use a CE approved power cord H05 VV-F or H05 VVH2-F2 (Refer to the
Electrical code which governs your country for installation of an Anti-Theft Unit to the Main
power Supply) with the cable specification and gauge provided below.
North American Power Supply Cords
This equipment is supplied with an external power line at one end and a
molded receptacle terminal block at the other end. Conductors are color coded
white (neutral), black (line) and green or green/yellow (ground).
Operation of this equipment at voltages exceeding 130 VAC will require power
supply cords which comply with NEMA configurations.
International Power Supply Cord
This equipment is supplied with an external power line at one end and a
molded receptacle terminal block at the other end. Conductors are CEE colorcoded—light blue (neutral), brown (line) and green/yellow (ground). Other IEC
320 C-13 type power supply cords can be used if they comply with the safety
regulations of the country in which they are installed.
Main AC input Cable Specifications.
Pin
Conductors
Gauge
AWG
Conductor L
0.75 mm 2
18
Main AC Live
Conductor N
0.75 mm 2
18
Main AC Neutral
Conductor GND
0.75 mm 2
18
Main AC Gnd
16
Description
Common Platform EAS Systems
SPS Box External Relay interface
The external relay interface is located at Output side of the SPS.
Suggested Relay Ratings
1A@ 24 VDC
Last 4 pins on this end.
Pin 1 Pin 2 Pin 3 Pin 4Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10
SPS Output Terminal Layout (10 pins)
Alarm
Relay
SPS to Pedestal Cable (6 wires)
Pin #
Function
GND
24VAC
TX OFF
Alarm
AntiJammer
Alarm
Volume
Jammer
Relay
1A
Contact Rating
Electrical
Notes:
1. Wire length to the dry contact circuit is limited to 20 feet.
2. To prevent high voltage noise from being introduced into
the transceiver and degrading the system’s performance,
it is highly recommended that you use a 24vdc output
relay.
***
17
10
1A
Contact Rating

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2008:06:25 13:15-07:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:06:25 13:15-07:00
Format                          : application/pdf
Creator                         : Owner
Title                           : Microsoft Word - CommonPlatform-PING-06250801.doc
Document ID                     : uuid:91be401d-371b-4c20-ae58-188c575684dd
Instance ID                     : uuid:7dd556ac-beeb-4446-99e9-167c1cceb5b2
Page Count                      : 21
Author                          : Owner

EXIF Metadata provided by EXIF.tools