WGI Innovations I8 Game Trail Camera User Manual

WGI Innovations, Ltd. Game Trail Camera

User Manual

Download: WGI Innovations I8 Game Trail Camera User Manual
Mirror Download [FCC.gov]WGI Innovations I8 Game Trail Camera User Manual
Document ID1866375
Application IDEmVMyCB1zNTHg+2Ytem7xw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize320.13kB (4001565 bits)
Date Submitted2012-12-21 00:00:00
Date Available2012-12-21 00:00:00
Creation Date2012-10-22 15:28:51
Producing SoftwareAdobe PDF Library 9.9
Document Lastmod2012-10-22 15:29:14
Document TitleUser Manual
Document CreatorAdobe InDesign CS5.5 (7.5.2)

Infrared Digital Scouting Camera
User’s Manual
Model # I8
Includes
USB Cable
2 - Bungee Cords
Flextime Player
Software
Camera Unit
NOTE: Flextime Player Software is optional.
Flextime files can be played by using most
media players.
page 1
User Manual
RESOLUTION
FLASH
FLASH RANGE
SENSOR
SENSOR RANGE
IMAGE FORMAT
MEMORY
USB
IMAGE RESOLUTION
POWER SUPPLY
AUXILIARY POWER
BATTERY LIFE
ONBOARD POWER
HOUSING
MOUNTING
REDUX
MAX: 8 MP Still
Features
30 High Intensity Infrared LED’s
up to 55 feet
Passive Infrared Sensor (PIR) Motion and Heat
up to 60 feet
JPEG - Digital Stills/ AVI-Digital Video
up to 32GB SD Card (not included and required)
Class 4 and above recommended
5-PIN Mini USB style - included
High (8 MP)
Medium (6 MP)
Low (4 MP)
4 C-Cell batteries (not included and required)
Alkaline recommended
External power port
Estimated up to 1 year or 40,000 photos
Built in battery to retain Date and Time
Weather resistant with rubber gaskets
2 Bungee cords - included
Technology to reduce motion blur during
transition time
Note: Battery life will vary depending on camera settings as well as environmental conditions. Camera settings such as shorter delay periods or even using
Flextime mode are examples of settings that can reduce overall battery life.
Environmental conditions such as extreme cold can also influence battery life.
page 2
Installing Batteries
2.
Open the door at the bottom of
the camera by unlatching the
locking tab.
With the camera facing up, open
the battery compartment cover
by sliding the latch to the left.
3.
With the bottom of the camera
towards you, load two C-cell batteries
with the positive ends towards you in
the left battery chamber and load two
C-cell batteries with the negative
ends towards you in the right battery
chamber.
1.
NOTE:
Do not mix old and new batteries. Do not mix
alkaline, standard (carbon-zinc) or rechargable
(ni-cad, ni-mh, etc) batteries.
page 3
4.
Close battery compartment cover. To
latch the cover simply pull the latch
slightly to the left as you close the
battery compartment cover.
5.
Load SD memory card (up to 32GB not
into the SD card slot with
the connectors facing up.
included)
TIPS:
Make sure the SD Card is unlocked
(small switch on the side of the SD Card)
or the camera LCD will read “LOCK”.
IMPORTANT:
Make sure the camera is powered off
before removing or installing an SD card.
If you are using an SD card from other
cameras, please make sure to format the
SD card in your computer prior to use in
your camera. New cards are ok to use
straight from the package.
page 4
Power On
1.
To turn the unit ON, press and
release the power button.
POWER
2.
Ready
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
Flextime
P2
Video
Day
Med
Med
Wide
1m 2m
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
Night
Lo
Lo
HD
5m 10m
Flextime Both
P2
Interval
Video
Day
Night
Med
Lo
Med
Lo
Wide
HD
1m 2m 5m 10m
NOTE: LCD cycle through camera
information. PIR picture number >
Flextime number > Remaining
pictures > Time
page 5
1.
LCD Ready Mode: The camera
will automatically enter Ready
Mode if a button is not pressed
for greater than 30 seconds. The
status lights will illuminate for a
total of 2 minutes.
2.
PIR LED Status Light: During the
first 2 minutes of Ready Mode,
the red light will illuminate when
a PIR event is triggered. The red
light will blink for 2-3 seconds
when photo is taken during this
first 2 minutes. After 2 minutes
all indicator lights will turn off
until a button is pressed.
Both
Interval
Check the battery level icon to
ensure
the
batteries
just
installed contain the proper
charge level. If so, you are ok to
proceed with camera use.
Ready
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
Test Mode
POWER
Ready
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
Flextime Both
P2
Interval
Video
Day
Night
Med
Lo
Med
Lo
Wide
HD
1m 2m 5m 10m
Power Save
1.
2.
After 30 seconds without any
buttons being pushed, the LCD
will turn off and camera enters
into Power Save or Ready Mode.
Setting Time
1.
Ready
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
The LCD screen can be awakened by pressing the Power
button briefly.
Note: The LCD will not “wake up” when
camera is writing to memory.
2.
POWER
Ready
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
Flextime
P2
Video
Day
Med
Med
Wide
1m 2m
To change date and time, start by
pressing and release the center
navigation button to set the hour.
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
Flextime
P2
Video
Day
Med
Med
Wide
1m 2m
Both
Interval
Night
Lo
Lo
HD
5m 10m
Press the left or right navigation
button to go up or down in
sequence.
Both
Interval
Ready
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
Night
Lo
Lo
HD
5m 10m
3.
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
Flextime
P2
Video
Day
Med
Med
Wide
1m 2m
Both
Interval
Night
Lo
Lo
HD
5m 10m
When the hour is set, repeat steps
1 and 2 to set the minutes.
page 6
Setting Date
1.
Press the center navigation
button after setting the minute to
change the Day.
Ready
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
2.
page 7
Flextime Both
P2
Interval
Video
Day
Night
Med
Lo
Med
Lo
Wide
HD
1m 2m 5m 10m
Press the left or right navigation
button to go up or down in
sequence.
Ready
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
3.
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
Flextime Both
P2
Interval
Video
Day
Night
Med
Lo
Med
Lo
Wide
HD
1m 2m 5m 10m
When the DAY is set, repeat
steps 1 and 2 to set the Month
and Year.
Location
Save the location of the area the camera was
installed. This is for your reference and is
optional. If you do not wish to name your location
skip to the next step.
1.
2.
POWER
3.
Press the center navigation button
while Location is selected. The
first character will be blinking.
Ready
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
Flextime
P2
Video
Day
Med
Med
Wide
1m 2m
Both
Interval
Ready
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
Flextime
P2
Video
Day
Med
Med
Wide
1m 2m
Both
Interval
Night
Lo
Lo
HD
5m 10m
Press the left or right navigation
button to go up or down in
sequence. Press the center
navigation button when the
character shown is what you want
and move to the next character.
Night
Lo
Lo
HD
5m 10m
Repeat steps 1 and 2 to set the rest
of the characters. Press the center
navigation button to skip spaces
and save the location name.
Trigger
Flextime
This setting allows you to choose the mode in
which the camera will be capturing images.
1.
Press the center navigation button
while Trigger is selected. The
Ready
highlighted
option will be blinking.
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
2.
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
Flextime
P2
Video
Day
Med
Med
Wide
1m 2m
Night
Lo
Lo
HD
5m 10m
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
Flextime
P2
Video
Day
Med
Med
Wide
1m 2m
Press the center navigation button
while
Ready Flextime is selected. The
Time/Date
highlighted
option will be blinking.
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
Both
Interval
Press the left or right navigation
button to move to different
options. Press the center navigaReady
tion
button to save the setting.
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
1.
2.
POWER
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
Flextime
P2
Video
Day
Med
Med
Wide
1m 2m
Both
Interval
Night
Lo
Lo
HD
5m 10m
Press the left or right navigation
button to move to different options.
Press
Ready the center navigation button
Time/Date
Location the setting.
to save
PIR Mode Flextime Both
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
P2
Video
Day
Med
Med
Wide
1m 2m
Interval
Night
Lo
Lo
HD
5m 10m
Both
Interval
Night
Lo
Lo
HD
5m 10m
TRIGGER:
PIR MODE: Takes a photo only when the PIR
sensor is triggered.
FLEXTIME(Time Lapse): Takes time lapse images at
set intervals during the key movement periods
of the day, depending on your Flextime settings.
BOTH: Both PIR and Flextime are active.
The Interval setting is set by the Delay Setting on
the camera with a 1 minute minimum Flextime
delay. See chart on the next page for Flextime
options.
NOTE: Camera needs at least 48 hours in the
field to acclimate to the environment for
Flextime to function properly.
Reminder: Only use “Flextime” and “Both”
modes if you are wanting to use time lapse
technology. These modes can reduce battery life
versus the standard “PIR” mode.
page 8
FLEXTIME selected
Flextime period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Camera is inactive before and after Flextime periods.
P1
INACTIVE
Flextime is active twice a day.
15 MINUTES
AFTER
FLEX SUNSET
TIME
15 MINUTES
BEFORE
SUNRISE FLEX
TIME
INACTIVE
1 HOUR
AFTER
SUNRISE
Camera is in PIR mode before and after Flextime periods.
P2
PIR
INACTIVE
1 HOUR
BEFORE
SUNSET
Flextime is active twice a day.
FLEX
TIME
FLEX
TIME
PIR
PIR
Flextime period:
1. 15 min before Sunrise
to 15 min after Sunset
Camera is in PIR mode before and after Flextime periods.
INTERVAL
Flextime is active during daytime.
PIR
PIR
FLEXTIME
BOTH selected
Flextime + PIR period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime + PIR period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Camera is inactive before and after Flextime + PIR periods.
P1
PIR
INACTIVE
1 HOUR
AFTER
SUNRISE
1 HOUR
BEFORE
SUNSET
P2
INTERVAL
PIR
Flextime + PIR is active twice a day.
FLEX
TIME
FLEX
TIME
PIR
INACTIVE
PIR
Camera is in PIR mode before and after Flextime + PIR periods.
Flextime + PIR period:
1. 15 min before Sunrise
to 15 min after Sunset
page 9
INACTIVE
Flextime + PIR is active twice a day.
15 MINUTES
AFTER
FLEX SUNSET
TIME
15 MINUTES
BEFORE
SUNRISE FLEX
TIME
PIR
Camera is in PIR mode before and after Flextime + PIR periods.
PIR
PIR
PIR
Flextime + PIR is active during daytime.
PIR
FLEXTIME & PIR
PIR Mode
1.
Press the center navigation
button while PIR Mode is
selected.
The highlighted option
Ready
willTime/Date
be blinking.
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
2.
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
Flextime
P2
Video
Day
Med
Med
Wide
1m 2m
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
Flextime
P2
Video
Day
Med
Med
Wide
1m 2m
1.
Both
Interval
Both
Interval
Night
Lo
Lo
HD
5m 10m
Press the center navigation
button while PIR Active is
selected.
The highlighted option
Ready
Time/Date
willLocation
be
blinking.
PIR Mode Flextime Both
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
Night
Lo
Lo
HD
5m 10m
Press the left or right navigation
button to move to different
options.
Press the center navigaReady
tionTime/Date
button to save the setting.
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
PIR Active
2.
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
P2
Video
Day
Med
Med
Wide
1m 2m
Interval
Night
Lo
Lo
HD
5m 10m
Press the left or right navigation
button to move to different
options.
Press the center navigaReady
Time/Date
tionLocation
button
to save the setting.
PIR Mode Flextime Both
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
P2
Video
Day
Med
Med
Wide
1m 2m
Interval
Night
Lo
Lo
HD
5m 10m
PIR ACTIVE:
PIR MODE:
STILL: The camera takes still photographs.
VIDEO: The camera takes 30 second videos.
24 HR: The PIR can be active at all times.
DAY: The PIR can be active in daylight hours
only.
NIGHT: The PIR can be active in nighttime
hours only.
page 10
PIR Sensitivity
1.
Press the center navigation
button while PIR Sense is
Ready
selected.
The highlighted option
Time/Date
Location
will
be blinking.
PIR Mode Flextime Both
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
2.
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
1.
Flextime Both
P2
Interval
Video
Day
Night
Med
Lo
Med
Lo
Wide
HD
1m 2m 5m 10m
Press the center navigation
Ready
button
while Resolution is
Time/Date
Location
selected.
The
highlighted
option
PIR Mode
Flextime Both
Trigger
P1
P2
Interval
willFlextime
Still
Video
PIRbe
Modeblinking.
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
P2
Interval
Video
Day
Night
Med
Lo
Med
Lo
Wide
HD
1m 2m 5m 10m
Press the left or right navigation
button to move to different
options.
Press the center navigaReady
Time/Date
tion
button to save the setting.
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
Resolution
2.
24Hr
Hi
Hi
Regular
15s 30s
Day
Med
Med
Wide
1m 2m
Night
Lo
Lo
HD
5m 10m
Press the left or right navigation
Ready
button
to move to different
Time/Date
Location
options.
Press
the
center
PIR Mode
Flextime
Both navigaTrigger
P1
P2
Interval
Flextime
tion
to save
Still
Videothe setting.
PIR button
Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
24Hr
Hi
Hi
Regular
15s 30s
Day
Med
Med
Wide
1m 2m
Night
Lo
Lo
HD
5m 10m
RESOLUTION:
PIR SENSE:
HI: The PIR detects the smallest movement.
HI: Images will be at the highest resolution
but take up the most space.
MED: (Default) The PIR detects most common
size movements.
MED: Images will be at medium resolution
and take up average space.
LO: The PIR detects only larger movements.
LO: Images will be at the lowest resolution
and take up the least space.
page 11
Picture/Video
1.
Press the center navigation
Ready while Picture is selected.
button
Time/Date
TheLocation
highlighted
option
PIR Mode Flextime
Both will be
Trigger
P1
P2
Interval
Flextime
blinking.
Still
Video
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
2.
24Hr
Hi
Hi
Regular
15s 30s
Day
Med
Med
Wide
1m 2m
24Hr
Hi
Hi
Regular
15s 30s
Day
Med
Med
Wide
1m 2m
1.
Night
Lo
Lo
HD
5m 10m
PICTURE:
REGULAR: Images taken will be in regular
angle or 4:3 aspect ratio.
WIDE: Images taken will be in wide angle or
16:9 aspect ratio.
Press the center navigation
Ready while Delay is selected.
button
Time/Date
TheLocation
highlighted
option
PIR Mode Flextime
Both will be
Trigger
P1
P2
Interval
Flextime
blinking.
Still
Video
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
Night
Lo
Lo
HD
5m 10m
Press the left or right navigation
Ready
button
to move to different
Time/Date
Location Press the center navigaoptions.
PIR Mode Flextime Both
Trigger
P1
P2
tionFlextime
to save
theInterval
setting.
Still
Video
PIRbutton
Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
Delay
2.
24Hr
Hi
Hi
Regular
15s 30s
Day
Med
Med
Wide
1m 2m
Night
Lo
Lo
HD
5m 10m
Press the left or right navigation
Ready
button
to move to different
Time/Date
Location Press the center navigaoptions.
PIR Mode Flextime Both
Trigger
P2
tionFlextime
button P1
to save
theInterval
setting.
Still
Video
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
24Hr
Hi
Hi
Regular
15s 30s
Day
Med
Med
Wide
1m 2m
Night
Lo
Lo
HD
5m 10m
DELAY: The time before the camera is able
to take another picture.
PIR Mode: minimum 15s
FLEXTIME Mode: minimum 1 minute
page 12
Power Off
1.
Power Port
To turn the unit off, first wake up
the LCD screen and then depress
and hold the power button until
the LCD turns off.
POWER
Ready
Time/Date
Location
Trigger
Flextime
PIR Mode
PIR Active
PIR Sense
Still Res
Pic/Video
Delay
PIR Mode
P1
Still
24Hr
Hi
Hi
Regular
15s 30s
1.
WGI Cameras come standard with
an external power port. You must
open the weather resistant cover
and use a Wildgame Innovations
6 Volt camera battery accessory.
Flextime Both
P2
Interval
Video
Day
Night
Med
Lo
Med
Lo
Wide
HD
1m 2m 5m 10m
Reset
Image Stamp
Reset button located next to the
battery compartment. Push
button to reset settings back to
factory settings.
RESET
Pictures Display:
Location
Photo
Count
Time Date Moon Phase
08:15PM
page 13
11-12-2011
T08
0200
Mounting
1.
When mounting to a tree, first latch
the 2 bungee cords through the
mounting holes on the left or right
side of the camera. Then, stretch
the cords around the tree and latch
the other ends of the bungee cords
through the mounting holes on the
opposite side of the camera.
Important
Once you connect the camera to your computer via the
USB cable/ports, the camera will then draw power from
the computer. When completing the viewing, transferring, copying or deletion of images, please make sure
that you DISCONNECT THE USB CABLE FROM BOTH
THE CAMERA AND THE COMPUTER, as you will not be
able to power the camera OFF until you do so.
The directions as contained herein assume that you are
using a Microsoft operating system and not Linux or a
Mac-based operating system. Even said, there may be
slight variations in your process based on the specific
version of the operation system that you are using as
well as the predefined user preference for each
computer. The below listed steps are to serve as a
guideline and may have to be slightly modified based on
the specific operating system and preference as on your
personal computer.
TIPS:
Recommended distance from target area is 25-30 feet
for optimal imaging quality.
To improve the quality of your images, try not to mount
the unit facing the rising or the setting sun in order to
avoid direct sunlight into the camera lens.
If mounting to a feeder unit or dusty environment, be
sure to clean the camera lens cover, incandescent flash
cover, and the PIR sensor cover on a regular basis.
Periodically check the mounting of the camera to
insure it is not loose.
Make sure that you securely latch the door closed
each and every time you use the unit, as the moisture
seal will not be activated unless closed properly.
Check batteries frequently to insure no corrosive
build-up, as this may cause harm to the camera.
page 14
Retrieving Images
Method 1: Leave SD card in camera
A. First, make sure that the camera is
powered OFF. Next, plug the USB cable into
the camera and then into the USB port on
your computer. Once this is complete (in this
order only), then power the camera ON.
B. Once complete, your computer may
automatically launch “AutoPlay”, a window
recognizing a new Removable disk (the
camera).
C. If so, it should give you three selections:
1. Import pictures
2. View pictures
3. Open folder to view files
D. Select the method from the list provided
that best suits your requirements. Once a
selection is made, you can then view the
images located on the SD Card and manipulate them as needed.
E. If your computer does not automatically
launch the AutoPlay window recognizing the
Removable Disk (the camera), then you will
need to go to the “Start Menu” at the bottom
left of your screen and select “Computer”.
The summary view will then be illustrated on
the right hand side of the window where the
“Devices with Removable Storage” will be
listed. The computer will recognize the
camera as Removable Disk.
page 15
(SD Card in Camera)
Please select Removable Disk from this
menu (or double click on the graphical
icon).
F. This will then direct you into the SD
Card file folder. Images are in the MEDIA
folder while Flextime files are in the FLEX
folder.
G. Once open, you will then see all of the
photo files that are located on the SD
Card. Select each image individually to
view. The default viewing browser for
your computer will then automatically
launch.
H. Repeat for viewing all or other photos.
I. If you determine that you want to
delete the image, select the image by
placing your cursor on it and clicking your
mouse only once. Right click on your
mouse and select delete. This will delete
the image permanently, so be absolutely
sure you want to do this before selecting
delete.
TIP: The software drivers necessary to
use and view the camera are automatically downloaded to the computer when
you connect your camera to the computer
via the included USB cable.
Retrieving Images
Method 2: Remove SD card and use card
reader
A. First, remove the SD Card from the camera
unit itself by pressing on it to where it
automatically ejects.
B. Next, insert the SD card into your SD card
reader.
C. Once inserted into your computer it may
automatically launch “AutoPlay”, a window
recognizing a new Secure Digital Storage
Device (the SD Card).
D. If so, it should list several options for the
next steps (not limited to the following):
1. Picture Options
a. Import pictures
b. View pictures
c. Copy Disc
d. Transfer pictures
2. General Options
a. Open folder to view files
E. Select the method from the list provided
that best suits your requirements. If the
selection is made to “View pictures”, you can
then view the images located on the SD Card
and manipulate them as needed.
F. If your computer does not automatically
launch the AutoPlay window recognizing the
Removable Disk (the SD Card), then you will
need to go to the “Start Menu” at the bottom
(SD Card reader)
left of your screen and select “Computer”. The summary view will then be
illustrated on the right hand side of the
window where by the “Devices with
Removable Storage” will be listed. The
computer will recognize the reader as
“Secure Digital Storage Device”. Please
select “Secure Digital Storage Device”
from this menu (or double click on the
graphical icon).
G. This will then direct you into the SD
Card file folder. Images are in the MEDIA
folder while Flextime files are in the
FLEX folder.
H. Once open, you will then see all of the
photo files that are located on the SD
Card. Select each image individually to
view. The default viewing browser for
your computer will then automatically
launch.
I. Repeat for viewing all or other photos.
J. If you determine that you want to
delete the image, select the image by
placing your cursor on it and clicking
your mouse only once. Right click on your
mouse and select delete. This will delete
the image permanently, so be absolutely
sure you want to do this before selecting
delete.
page 16
Warranty
DISCLAIMERS
WGI Innovations, LTD. is not responsible for damage, expense or injury caused by the unauthorized use of,
alterations to, improper connection of and abuse or neglect of the WGI Innovations™ products.
WARRANTY
For the warranty to be in effect, you MUST completely fill out and mail the warranty card along with your proof
of purchase to WGI Innovations within (14) days after the date of purchase. As an alternative to mail, you may also
visit our website and register your product at www.wildgameinnovations.com (you are still required to mail WGI
Innovations your proof of purchase before the warranty is placed in effect.) Follow the onscreen directions to
complete the process.
WGI Innovations, LTD will replace all workmanship defects free of charge for ONE (1) YEAR after the date of
purchase as long as your warranty is in effect.
This warranty DOES NOT COVER damage, expense or injury caused by unauthorized repairs, alterations,
improper connection, shipping, abuse, theft, accident, neglect or collateral loss.
When returning product(s) for service you MUST obtain a Return Merchandise Authorization (RMA) number from
WGI Innovations, LTD. Please include name, UPS address (No P.O. Box), telephone number, RMA number and a
complete description of the problem on all enclosed correspondence. When possible, pack product carefully in
original carton. Customers are responsible for any shipping cost to WGI Innovations. WGI Innovations will pay the
shipping cost of replacement product to the customer. We are not responsible for damage incurred in returning
items for repair.
For product service send to:
WGI Innovations
602 Fountain Parkway
Grand Prairie, TX 75050
(800) 847-8269
Thank you for your purchase!
CUSTOMER SERVICE
WGI Innovations, LTD. stands behind every product we manufacture for a one year product workmanship
warranty and a strong commitment to customer service. If you are in need of customer service for missing parts
or need assistance with the operation or assembly of your product, we encourage you to call one of our
customer service representatives and let us assist you with your WGI Innovations product.
DISCLAIMER
WGI Innovations, LTD. reserves the right to make changes to product features, functionality and physical design
at its sole discretion. As a result, such changes may not be reflected in this version of the manual.
page 17
FCC
FCC STATEMENT
Product Name: Game Trail Camera
Trade Name: Wildgame Innovations
Model# I8
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1)
This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
page 18
602 Fountain Parkway
Grand Prairie, TX 75050
800.847.8269
“Wildgame Innovations” and the “Button Logo” are TM trademarks of Wildgame Innovations, LLC.
“Sport Responsible” , “Redux” and “Flextime” are TM trademarks of WGI Innovations, LTD.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c003 61.141987, 2011/02/22-12:03:51
Create Date                     : 2012:10:22 15:28:51-05:00
Metadata Date                   : 2012:10:22 15:29:14-05:00
Modify Date                     : 2012:10:22 15:29:14-05:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5.2)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 13085 bytes, use -b option to extract), (Binary data 13334 bytes, use -b option to extract)
Instance ID                     : uuid:08c5fa7f-15fc-4854-82f0-151b0b5e0076
Document ID                     : xmp.did:64F5B76CBA0FE111AAC5F76584432029
Original Document ID            : xmp.did:64F5B76CBA0FE111AAC5F76584432029
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:64F5B76CBA0FE111AAC5F76584432029, xmp.iid:F2B3BCFBBC0FE111AAC5F76584432029, xmp.iid:F3B3BCFBBC0FE111AAC5F76584432029, xmp.iid:ABF43F21C00FE111AAC5F76584432029, xmp.iid:ACF43F21C00FE111AAC5F76584432029, xmp.iid:D64D224FC60FE111AAC5F76584432029, xmp.iid:2D6FEA3BA710E111AAC5F76584432029, xmp.iid:20CF383CE862E111A58F80074A00DB18, xmp.iid:EF73BC331363E111A58F80074A00DB18, xmp.iid:81D572D6A963E111A58F80074A00DB18, xmp.iid:E776B671B163E111A58F80074A00DB18, xmp.iid:5A716EEAB163E111A58F80074A00DB18, xmp.iid:54C76B987664E111A58F80074A00DB18, xmp.iid:BCFE279D8564E111A58F80074A00DB18, xmp.iid:AA6FDF561B13E211B2B2980005CC79C2, xmp.iid:AB6FDF561B13E211B2B2980005CC79C2, xmp.iid:AC6FDF561B13E211B2B2980005CC79C2, xmp.iid:B057B564D113E2118957C7A13D06C81E, xmp.iid:044B3910E016E2119553B00A88728F78, xmp.iid:C05E1C4CE016E2119553B00A88728F78, xmp.iid:188B75771217E211BEA8DE5136EC2B4B, xmp.iid:0D4335132619E2119DA49B441341FCF6, xmp.iid:FC25A0AA4519E2119DA49B441341FCF6, xmp.iid:FD25A0AA4519E2119DA49B441341FCF6, xmp.iid:17E0AC3F021AE2119847BEE735DB1562, xmp.iid:18E0AC3F021AE2119847BEE735DB1562, xmp.iid:A103D740831CE211B43DBA13A01FBA4F, xmp.iid:72C67E11871CE211B43DBA13A01FBA4F
History When                    : 2011:11:15 13:00:59-06:00, 2011:11:15 13:06:54-06:00, 2011:11:15 13:06:54-06:00, 2011:11:15 13:29:26-06:00, 2011:11:15 13:32:03-06:00, 2011:11:15 14:13:40-06:00, 2011:11:16 17:03:44-06:00, 2012:02:29 09:15:38-06:00, 2012:02:29 14:23:12-06:00, 2012:03:01 08:21:29-06:00, 2012:03:01 09:15:56-06:00, 2012:03:01 09:19:19-06:00, 2012:03:02 08:47:12-06:00, 2012:03:02 10:34:42-06:00, 2012:10:10 15:44:51-05:00, 2012:10:10 15:44:51-05:00, 2012:10:10 15:45:53-05:00, 2012:10:11 13:28:03-05:00, 2012:10:15 10:50:37-05:00, 2012:10:15 10:52:17-05:00, 2012:10:15 16:51:25-05:00, 2012:10:18 08:16:49-05:00, 2012:10:18 12:02:58-05:00, 2012:10:18 12:03:56-05:00, 2012:10:19 10:32:53-05:00, 2012:10:19 10:33:27-05:00, 2012:10:22 15:01:22-05:00, 2012:10:22 15:28:41-05:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Doc Change Count                : 1
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 20
Creator                         : Adobe InDesign CS5.5 (7.5.2)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: YTT-I8

Navigation menu