WGI Innovations N6E Game Scouting Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1682407
Application ID	LpXhQ7MIFSIo0EHJHOX92w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	421.25kB (5265652 bits)
Date Submitted	2012-04-23 00:00:00
Date Available	2012-04-23 00:00:00
Creation Date	2012-03-06 07:52:24
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2012-03-06 07:52:33
Document Title	Users Manual
Document Creator	Adobe InDesign CS5 (7.0.4)

Infrared Digital Scouting Camera
User’s Manual
Model # N6E
Includes
USB Cable
2 - Bungee Cords
Flextime Player
Software
Camera Unit
NOTE: Flextime Player Software is optional.
Flextime files can be played by using most
media players.
page 1
User Manual
Features
RESOLUTION
FLASH
FLASH RANGE
SENSOR
SENSOR RANGE
IMAGE FORMAT
MEMORY
USB
IMAGE RESOLUTION
POWER SUPPLY
AUXILIARY POWER
BATTERY LIFE
ONBOARD POWER
HOUSING
MOUNTING
REDUX
MAX: 6 MP
30 High Intensity Infrared LED’s
up to 65 feet
Passive Infrared Sensor (PIR) Motion and Heat
up to 60 feet
JPEG - Digital Still / AVI - Digital Video
up to 32GB SD Card (not included)
5-PIN Mini USB style - included
High (6MP)
Medium (4MP)
Low (2MP)
4 C-Cell batteries (not included)
External power port
Estimated up to 3 months (in PIR mode)
Battery life may be reduced in Flextime mode
(depending on Flextime setting)
Built in battery to retain Time and Settings
Weather resistant with rubber gaskets
2 Bungee cords - included
Technology to reduce motion blur during
transition time
page 2
Installing Batteries
1.
Open the door at the bottom of the camera by
unlatching the locking tabs.
Illustration A
2.
page 3
With the camera facing open, open the battery
compartment cover by sliding the latch to the
left. (Illustration A and B)
Illustration B
3.
With the bottom of the camera
towards you, load two C-cell batteries
with the positive ends towards you in
the left battery chamber and load two
C-cell batteries with the negative
ends towards you in the right battery
chamber.
4.
Close battery compartment cover. To
latch the cover simply pull the latch
slightly to the left as you close the
battery compartment cover.
5.
Load SD memory card (up to 32GB not
included) into the SD card slot with the
connectors facing up.
POWER
TIPS:
Make sure the SD Card is unlocked (small
switch on the side of the SD Card) or the
camera LCD will read “LOCK”.
page 4
Test Mode
Power On
1.
2.
To turn the unit ON press and release
the power button.
Check the battery level icon to ensure
the batteries just installed contain the
proper charge level. If so, you are ok to
proceed with camera use.
1.
LCD Ready Mode: The camera will
automatically enter Ready Mode if a
button is not pressed for greater than
30 seconds. The status lights will
illuminate for a total of 2 minutes.
2.
PIR LED Status Light: During the first
2 minutes of Ready Mode, the red light
will illuminate when a PIR event is
triggered. The red light will blink for
2-3 seconds when photo is taken
during this first 2 minutes. After 2
minutes all indicator lights will turn
off until a button is pressed.
POWER
page 5
Power Save
Setting Time
1.
After 30 seconds without any buttons
being pushed, the LCD will turn off and
camera enters into Power Save or
Ready Mode.
2.
The LCD screen can be awakened by
pressing the Power button briefly.
1.
To change date and time, start by
pressing and release the center
navigation button to set the hour.
POWER
POWER
Note: The LCD will not “wake up” when
camera is writing to memory.
2.
Press the left or right navigation
button to go up or down in sequence.
POWER
POWER
3.
When the hour is set, repeat steps 1
and 2 to set the minutes.
page 6
Setting Date
1.
Location
Press the center navigation button
after setting the minute to change the
Day.
POWER
Press the center navigation button
while Location is selected. The first
character will be blinking.
PO
POWER
POWER
2.
1.
POWER
Press the left or right navigation
button to go up or down in sequence.
2.
POWER
POWER
Press the left or right navigation
button to go up or down in sequence.
Press the center navigation button
when the character shown is what you
want and move to the next character.
POWER
POWER
3.
page 7
When the DAY is set, repeat steps 1
and 2 to set the Month and Year.
3.
Repeat steps 1 and 2 to set the rest of
the characters. Press the center
navigation button to skip spaces and
save the location name.
PO
Trigger
1.
Press the center navigation button
while Trigger is selected. The
highlighted option will be blinking.
POWER
Flextime
1.
Press the center navigation button
while Flextime is selected. The
highlighted option will be blinking.
POWER
OWER
POWER
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
POWER
OWER
POWER
POWER
TRIGGER:
PIR MODE: Takes a photo or video only
when the PIR sensor is triggered.
FLEXTIME (Time Lapse): Takes time lapse
images at set intervals during the key
movement periods of the day, depending
on your Flextime settings.
BOTH: Both PIR and Flextime are active.
The Interval setting is set by the Delay
Setting on the camera with a 1 minute
minimum Flextime delay. See chart on
the next page for Flextime options.
NOTE: Camera needs at least 48 hours
in the field to acclimate to the environment for Flextime to function properly.
page 8
FLEXTIME selected
Flextime period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Camera is inactive before and after Flextime periods.
P1
INACTIVE
Flextime is active twice a day.
15 MINUTES
AFTER
FLEX SUNSET
TIME
15 MINUTES
BEFORE
SUNRISE FLEX
TIME
INACTIVE
1 HOUR
AFTER
SUNRISE
Camera is in PIR mode before and after Flextime periods.
P2
PIR
INACTIVE
1 HOUR
BEFORE
SUNSET
Flextime is active twice a day.
FLEX
TIME
FLEX
TIME
PIR
PIR
Flextime period:
1. 15 min before Sunrise
to 15 min after Sunset
Camera is in PIR mode before and after Flextime periods.
INTERVAL
Flextime is active during daytime.
PIR
PIR
FLEXTIME
BOTH selected
Flextime + PIR period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime + PIR period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Camera is inactive before and after Flextime + PIR periods.
P1
PIR
INACTIVE
1 HOUR
AFTER
SUNRISE
1 HOUR
BEFORE
SUNSET
P2
INTERVAL
PIR
Flextime + PIR is active twice a day.
FLEX
TIME
FLEX
TIME
PIR
INACTIVE
PIR
Camera is in PIR mode before and after Flextime + PIR periods.
Flextime + PIR period:
1. 15 min before Sunrise
to 15 min after Sunset
page 9
INACTIVE
Flextime + PIR is active twice a day.
15 MINUTES
AFTER
FLEX SUNSET
TIME
15 MINUTES
BEFORE
SUNRISE FLEX
TIME
PIR
Camera is in PIR mode before and after Flextime + PIR periods.
PIR
PIR
PIR
Flextime + PIR is active during daytime.
PIR
FLEXTIME & PIR
PIR Mode
1.
PIR Active
1.
Press the center navigation button
while PIR Mode is selected. The
highlighted option will be blinking.
POWER
POWER
POWER
2.
Press the center navigation button
while PIR Active is selected. The
highlighted option will be blinking.
POWER
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
POWER
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
POWER
POWER
POWER
PIR MODE:
STILL: The camera takes still
photographs.
VIDEO: The camera takes 30
second videos.
PIR ACTIVE:
24 HR: The PIR can be active at all
times.
DAY: The PIR can be active in
daylight hours only.
NIGHT: The PIR can be active in
nighttime hours only.
page 10
PIR Sensitivity
1.
Press the center navigation button
while PIR Sense is selected. The
highlighted option will be blinking.
Picture
1.
Press the center navigation button
while Picture is selected. The
highlighted option will be blinking.
POWER
POWER
POWER
POWER
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
POWER
POWER
POWER
POWER
PIR SENSE:
HI: The PIR detects the smallest
movement.
MED: (Default) The PIR detects
most common size movements.
LO: The PIR detects only larger
movements.
page 11
PICTURE:
REGULAR: Images taken will be in
regular angle or 4:3 aspect ratio.
WIDE: Images taken will be in wide
angle or 16:9 aspect ratio.
Resolution
1.
Press the center navigation button
while Resolution is selected. The
highlighted option will be blinking.
POWER
POWER
2.
Delay
1.
Press the center navigation button
while Delay is selected. The
highlighted option will be blinking.
POWER
POWER
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
POWER
POWER
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
POWER
POWER
RESOLUTION:
HI: Images will be at the highest
resolution but take up the most space.
MED: Images will be at medium
resolution and take up average space.
LO: Images will be at the lowest
resolution and take up the least space.
DELAY: The time before the
camera is able to take another
picture.
PIR Mode: minimum 15s
FLEXTIME Mode: minimum 1
minute
page 12
Power Port
Power Off
1.
To turn the unit off, first wake up the
LCD screen and then depress and hold
the power button until the LCD turns
off.
1.
WGI Cameras come standard with an
external power port. You must open
the weather resistant cover and use a
Wildgame Innovations 6 Volt camera
battery accessory.
Image Stamp
Pictures Display:
-Temperature
- Time
- Date
- Moon Phase
- Photo Count
- Location
076F
page 13
08:15PM
11-12-2011
0290
T08
Mounting
1.
When mounting to a tree, first latch
the 2 bungee cords through the
mounting holes on the left or right
side of the camera. Then, stretch the
cords around the tree and latch the
other ends of the bungee cords
through the mounting holes on the
opposite side of the camera.
Important
Once you connect the camera to your computer via the
USB cable/ports, the camera will then draw power from
the computer. When completing the viewing, transferring, copying or deletion of images, please make sure
that you DISCONNECT THE USB CABLE FROM BOTH
THE CAMERA AND THE COMPUTER, as you will not be
able to power the camera OFF until you do so.
The directions as contained herein assume that you are
using a Microsoft operating system and not Linux or a
Mac-based operating system. Even said, there may be
slight variations in your process based on the specific
version of the operation system that you are using as
well as the predefined user preference for each
computer. The below listed steps are to serve as a
guideline and may have to be slightly modified based on
the specific operating system and preference as on your
personal computer.
TIPS:
Recommended distance from target area is 25-30 feet
for optimal imaging quality.
To improve the quality of your images, try not to mount
the unit facing the rising or the setting sun in order to
avoid direct sunlight into the camera lens.
If mounting to a feeder unit or dusty environment, be
sure to clean the camera lens cover, incandescent flash
cover, and the PIR sensor cover on a regular basis.
Periodically check the mounting of the camera to
insure it is not loose.
Make sure that you securely latch the door closed each
and every time you use the unit, as the moisture seal
will not be activated unless closed properly.
Check batteries frequently to insure no corrosive
build-up, as this may cause harm to the camera.
page 14
Retrieving Images (SD Card in Camera)
Method 1: Leave SD card in camera
A. First, make sure that the camera is
powered OFF. Next, plug the USB cable into
the camera and then into the USB port on
your computer. Once this is complete (in this
order only), then power the camera ON.
B. Once complete, your computer may
automatically launch “AutoPlay”, a window
recognizing a new Removable disk (the
camera).
C. If so, it should give you three selections:
1. Import pictures
2. View pictures
3. Open folder to view files
D. Select the method from the list provided
that best suits your requirements. Once a
selection is made, you can then view the
images located on the SD Card and manipulate them as needed.
E. If your computer does not automatically
launch the AutoPlay window recognizing the
Removable Disk (the camera), then you will
need to go to the “Start Menu” at the bottom
left of your screen and select “Computer”.
The summary view will then be illustrated
on the right hand side of the window where
the “Devices with Removable Storage” will
page 15
be listed. The computer will recognize the
camera as Removable Disk. Please select
Removable Disk from this menu (or double
click on the graphical icon).
F. This will then direct you into the SD Card
file folder. Images are in the MEDIA folder
while Flextime files are in the FLEX folder.
G. Once open, you will then see all of the
photo files that are located on the SD Card.
Select each image individually to view. The
default viewing browser for your computer
will then automatically launch.
H. Repeat for viewing all or other photos.
I. If you determine that you want to delete
the image, select the image by placing your
cursor on it and clicking your mouse only
once. Right click on your mouse and select
delete. This will delete the image permanently, so be absolutely sure you want to do
this before selecting delete.
TIP: The software drivers necessary to use
and view the camera are automatically
downloaded to the computer when you
connect your camera to the computer via the
included USB cable.
TIP: View Flextime Player Software CD for
more information on Flextime.
Retrieving Images (SD Card reader)
Method 2: Remove SD card and use card
reader
left of your screen and select “Computer”.
The summary view will then be illustrated
on the right hand side of the window where
A. First, remove the SD Card from the
by the “Devices with Removable Storage”
camera unit itself by pressing on it to where will be listed. The computer will recognize
it automatically ejects.
the reader as “Secure Digital Storage
B. Next, insert the SD card into your SD
Device”. Please select “Secure Digital
card reader.
Storage Device” from this menu (or double
C. Once inserted into your computer it may click on the graphical icon).
automatically launch “AutoPlay”, a window
G. This will then direct you into the SD Card
recognizing a new Secure Digital Storage
file folder. Images are in the MEDIA folder
Device (the SD Card).
while Flextime files are in the FLEX folder.
D. If so, it should list several options for the H. Once open, you will then see all of the
next steps (not limited to the following):
photo files that are located on the SD Card.
1. Picture Options
Select each image individually to view. The
a. Import pictures
default viewing browser for your computer
b. View pictures
will then automatically launch.
c. Copy Disc
I. Repeat for viewing all or other photos.
d. Transfer pictures
J. If you determine that you want to delete
2. General Options
the image, select the image by placing your
a. Open folder to view files
cursor on it and clicking your mouse only
E. Select the method from the list provided once. Right click on your mouse and select
that best suits your requirements. If the
delete. This will delete the image permaselection is made to “View pictures”, you can nently, so be absolutely sure you want to do
then view the images located on the SD Card this before selecting delete.
and manipulate them as needed.
F. If your computer does not automatically
launch the AutoPlay window recognizing the
Removable Disk (the SD Card), then you will
need to go to the “Start Menu” at the bottom
page 16
Warranty
DISCLAIMERS
WGI Innovations, LTD is not responsible for damage, expense or injury caused by the unauthorized use
of, alterations to, improper connection of and abuse or neglect of the WGI Innovations™ products.
WARRANTY
You must register your product warranty online at www.wildgameinnovations.com. Follow the on
screen directions to complete the process.
WGI Innovations, LTD will replace any product that may encounter material or workmanship defects free
of charge for ONE (1) YEAR after the date of purchase and thereafter the cost will vary per incident.
This warranty DOES NOT COVER damage, expense or injury caused by unauthorized repairs, alterations,
improper connection, shipping, abuse, theft, accident, neglect or collateral loss.
When returning product for service you MUST obtain a Return Merchandise Authorization (RMA)
number from WGI Innovations, LTD. Please include name, UPS address (no P.O. Box), telephone number,
RMA number and a complete description of the problem on all enclosed correspondence.
When possible, pack product carefully in original carton. Customers are responsible for any shipping
cost to WGI Innovations™. WGI Innovations™ will pay shipping cost of replacement product to the
customer. We are not responsible for damage incurred in returning items for repair.
CUSTOMER SERVICE
WGI Innovations, LTD stands behind every product we manufacture for a one year product workmanship warranty and a strong commitment to customer service. If you are in need of customer service for
missing parts or need assistance with the operation or assembly of your product, we encourage you to
call one of our customer service representatives and let us assist you with your WGI Innovations™
product.
DISCLAIMER
WGI Innovations, LTD reserves the right to make changes to product features, functionality and physical
design at its sole discretion. As a result, such changes may not be reflected in this version of the manual.
page 17
FCC CE
FCC STATEMENT
Product Name: Game Trail Camera
Trade Name: Wildgame Innovations
Model# N6E
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1)
This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
page 18
602 Fountain Parkway
Grand Prairie, TX 75050
800.847.8269
“Wildgame Innovations” and the “Button Logo” are TM trademarks of Wildgame Innovations, LLC.
“Sport Responsible” , “Redux” and “Flextime” are TM trademarks of WGI Innovations, LTD.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Create Date                     : 2012:03:06 07:52:24-06:00
Metadata Date                   : 2012:03:06 07:52:33-06:00
Modify Date                     : 2012:03:06 07:52:33-06:00
Creator Tool                    : Adobe InDesign CS5 (7.0.4)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 12103 bytes, use -b option to extract), (Binary data 13378 bytes, use -b option to extract)
Instance ID                     : uuid:d2f09e74-8ace-4d2c-934b-b2c044eaf234
Document ID                     : xmp.did:72C53E57D70FE111AAC5F76584432029
Original Document ID            : xmp.did:D74D224FC60FE111AAC5F76584432029
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:D74D224FC60FE111AAC5F76584432029, xmp.iid:4ADF6D1FCB0FE111AAC5F76584432029, xmp.iid:4BDF6D1FCB0FE111AAC5F76584432029, xmp.iid:E25E27A5D60FE111AAC5F76584432029, xmp.iid:72C53E57D70FE111AAC5F76584432029, xmp.iid:73C53E57D70FE111AAC5F76584432029, xmp.iid:AE01EC15D80FE111AAC5F76584432029, xmp.iid:1502BB65A710E111AAC5F76584432029, xmp.iid:0995C7E5B163E111A58F80074A00DB18, xmp.iid:5AD64387F263E111A58F80074A00DB18, xmp.iid:F8BF15157764E111A58F80074A00DB18, xmp.iid:9A28B3F88564E111A58F80074A00DB18, xmp.iid:34BDB1959367E111B6D1FF2B2C7D8416
History When                    : 2011:11:15 14:44:43-06:00, 2011:11:15 14:48:07-06:00, 2011:11:15 14:48:07-06:00, 2011:11:15 16:15:35-06:00, 2011:11:15 16:15:35-06:00, 2011:11:15 16:15:55-06:00, 2011:11:15 16:20:55-06:00, 2011:11:16 17:04:55-06:00, 2012:03:01 09:19:11-06:00, 2012:03:01 17:01:50-06:00, 2012:03:02 08:50:41-06:00, 2012:03:02 10:37:16-06:00, 2012:03:06 07:52:16-06:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Derived From Instance ID        : xmp.iid:E25E27A5D60FE111AAC5F76584432029
Derived From Document ID        : xmp.did:D74D224FC60FE111AAC5F76584432029
Derived From Original Document ID: xmp.did:D74D224FC60FE111AAC5F76584432029
Derived From Rendition Class    : default
Doc Change Count                : 1
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 20
Creator                         : Adobe InDesign CS5 (7.0.4)

EXIF Metadata provided by EXIF.tools