WINIA Electronics 7NF0016 DVDRW COMBO Recorder User Manual DF Q74D2N LS GB USA

Dongbu Daewoo Electronics Corporation DVDRW COMBO Recorder DF Q74D2N LS GB USA

Users Manual

DVD Recorder + VCRDVD Recorder + VCRDF-Q74D2N-JSUser ManualP/N : 97P95600N0-**DF-Q74D2N-LS(GB)_USA 05.1.25 6:3 AM 페이지A
iImportant SafeguardsImportant SafeguardsCAUTION: TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICEPERSONNEL.The lightning flash with arrowhead symbol,within an equilateral triangle, is intended toalert the user to the presence of uninsulated‘dangerous voltage‘ within the product’senclosure that may be of sufficient magnitudeto constitute a risk of electric shock.The exclamation point within an equilateral triangleis intended to alert the user to the presence ofimportant operating and servicing instructions inthe literature accompanying the appliance.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENWARNINGTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAINOR MOISTURE.CAUTIONTO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.ATTENTIONPOUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHEDANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.WARNING: Do not install this equipment in a confined space such as a bookcase orsimilar unit.NOTE TO CABLE/TV INSTALLER: This reminder is provided to call the cable TV system installer’s attention toArticle 820-40 of the National Electric Code (U.S.A.). The code providesguidelines for proper grounding and, in particular, specifies that the cableground shall be connected to the grounding system of the building, as close to the point of the cable entry aspractical.CAUTION: This DVD Recorder+VCR employs a Laser System. To ensure proper use of this product, please read thisowner’s manual carefully and retain for future reference. Should the DVD Recorder+VCR require maintenance,contact an authorized service center. Use of controls, adjustments, or the performance of procedures other thanthose specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, donot try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such asvases, should be placed on the apparatus. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment maycause harmful interference unless the modifications are expressly approved in the instruction manual. The usercould lose the authority to operate this equipment if an unauthorized change or modification is made.CLASS 1 LASER PRODUCTKLASSE 1 LASER PRODUKTLUOKAN 1 LASER LAITEKLASS 1 LASER APPARATCLASSE 1 PRODUIT LASERDF-Q74D2N-LS(GB)_USA 05.1.25 6:3 AM 페이지i
INTRODUCTIONiiCAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’SMANUAL AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTUREREFERENCE.This product has been designed and manufactured to assure personal safety. Improper use can result inelectric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe thefollowing procedures for installation, use, and servicing.This product does not contain any parts that can be repaired by the user.DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFERSERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.IMPORTANT SAFETY INSTRUCTIONSREGULATORY INFORMATION: FCC Part 15This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferencewhen the product is operated in a residential installation. This product generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instruction manual, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation. If this product does cause harmful interference to radio or television reception, which canbe determined by turning the product off and on, the user is encouraged to try to correct the interference by oneor more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the product and receiver.- Connect the product into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.FCC COMPLIANCE: The responsible party for this product’s compliance is: GoVideo, 7835 East McClain Drive, Scottsdale, AZ85260, USA.SERIAL NUMBER: The serial number is found on the back of the DVD Recorder+VCR. This number is for this unit only. You shouldrecord requested information here and retain this guide as a permanent record of your purchase.Model No. ___________________________________Serial No. ___________________________________1 Read these instructions.All these safety and operating instructionsshould be read before the product is operated.2 Keep these instructions.The safety, operating and use instructions shouldbe retained for future reference.3 Heed all warnings.All warnings on the product and in the operatinginstructions should be adhered to.4 Follow all instructions.All operating and use instructions should befollowed.Important SafeguardsDF-Q74D2N-LS(GB)_USA 05.1.25 6:3 AM 페이지ii
iii5 Do not use this product near water.For example: near a bath tub, wash bowl, kitchensink, laundry tub, in a wet basement; or near aswimming pool; and other areas located nearwater.6 Clean only with dry cloth.Unplug this product from the wall outlet beforecleaning. Do not use liquid cleaners.7 Do not block any ventilation openings. Install inaccordance with the manufacturer’s instructions. Slots and openings in the cabinet are providedfor ventilation and to ensure reliable operation ofthe product and to protect it from overheating.The openings should never be blocked by placingthe product on a bed, sofa, rug or other similarsurface. This product should not be placed in abuilt-in installation such as a bookcase or rackunless proper ventilation is provided or themanufacturer’s instructions have been adheredto.8Do not install near any heat sources such asradiators, heat registers, stoves, or otherapparatuses (including amplifiers) that produceheat.9Make sure that rating of your householdelectricity supply matches that shown on theback of your product.10Protect the power cord from being walked on orpinched particularly at plugs, conveniencereceptacles, and the point where they exit fromthe product.11Only use attachments/accessories specified bythe manufacturer.12Use only with the cart, stand,tripod, bracket, or table specifiedby the manufacturer, or sold withapparatus. When a cart is used,use caution when moving thecart/ product combination to avoid injury fromtip-over.13Unplug this product during lightning storms orwhen unused for long periods of time.14Refer all servicing to qualified service personnel.Servicing is required when the product has beendamaged in any way, such as: Power-supply cordor plug is damaged; liquid has been spilled orobjects have fallen into the product; the producthas been exposed to rain or moisture, does notoperate normally, or has been dropped.15Do not connect the product to the power supplyif you have just moved it from a cold environmentto a warm room. This can lead to condensationinside the product, which can damage it. Waitfor approximately 2 hrs for it to reach roomtemperature.16Make sure the product is placed at least 4 inches(10 cm) apart from other home appliances orobstacles to ensure sufficient ventilation.17This product is designed to work continuously.Switching if off does not disconnect if from thepower outlet. To disconnect if from the poweroutlet you have to unplug it.Important SafeguardsDF-Q74D2N-LS(GB)_USA 05.1.25 6:3 AM 페이지iii
INTRODUCTION1Important Safeguards _________________________iTable of Contents ______________________________1Overview ______________________________________2Identification of Controls_______________________6INTRODUCTIONConnecting Antenna/Cable ____________________11Connecting a TV _______________________________12Connecting an Amplifier/Receiver _____________13Connecting Optional Equipment ______________14Connecting a Digital Camcorder ______________14CONNECTIONSInitial Installation ______________________________15Initial Setup____________________________________17Setup Menu Overview 17Menu Navigation 17INSTALLATION Settings 17RECORDING OPTIONS Settings 19LANGUAGE Settings 20PREFERENCE / Video Settings 21PREFERENCE / Audio Settings 22PREFERENCE / Parental Controls 24Various PREFERENCE Settings 26System Information 27Restore Defaults 27On-Screen Display Overview __________________28SETUPDVD Playback _________________________________31VCR Playback _________________________________34Other Disc Playback __________________________36PLAYBACKBasic Recording________________________________38Recording from TV 38One Touch Record (OTR) 39Checking the Recording Time 39To Pause the Recording 39One Touch Copy - DVD to VHS 40Copy Edit (DVD ➝ VCR) 40One Touch Copy - VHS to DVD 41Copy Edit (VCR ➝ DVD) 41Timer Recording _______________________________42Recording from an External Input _____________44RECORDINGDISC Initialize __________________________________46Disc Menu _____________________________________46Title Menu _____________________________________49Editing _________________________________________51EDITINGTroubleshooting _______________________________53Technical Specifications ________________________56REFERENCETable of ContentsTable of ContentsDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지1
2OverviewOverviewDVD, DVD+R, DVD+RW?What is a DVD?DVD (Digital Versatile Disc) is a storage medium that combines the convenience of the compact disc with thelatest digital video technology. DVD video uses modern MPEG2 data compression technology that enables anentire feature film to be stored on a single five inch disc.How good is the resolution of DVD compared with VHS?The razor-sharp digital images have more than 500 lines of resolution at 720 pixels per line. This is more thantwice as high as VHS and even better than laser disc quality. DVD picture quality is easily comparable to thedigital masters produced in recording studios.What is a DVD+RW?DVD+ReWritable uses ‘phase change‘ media, the same technology on which rewritable CDs are based. A high-performance laser is used to change the reflective properties of the recording layer; this process can berepeated more than a thousand times.What is a DVD+R?Unlike a DVD+RW disc, a DVD+R (write-once DVD) can only be written to once. If it is not finalized after arecording, further recordings can be added to it. Old recordings can be deleted but they can no longer beoverwritten. The deleted recordings (titles) are marked 'deleted title'.Before a DVD+R can be played in a DVD player, it must be finalized in the DVD Recorder+VCR. Once thisprocess is complete, no further recordings can be added.What can I do with my DVD Recorder+VCR?Your DVD Recorder+VCR is a machine for recording and playing back digital video discs with ‘two-way‘compatibility with the universal DVD video standard. This means:• existing DVD video discs can be played on the recorder.• recordings made on your DVD Recorder+VCR can be played on other DVD video players and DVD-ROMdrives. Regional codeIf the region number on your DVD disc does not correspond to the regionnumber of this player, the disc cannot be played.1ALLDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지2
INTRODUCTION3Disc-related TermsTitle (DVD only)The main film, accompanying feature content, or music album. Each title is assigned a title reference numberenabling you to locate it easily.Chapter (DVD only)Sections of a movie or a musical piece that are smaller than titles. A title is composed of one or severalchapters. Each chapter is assigned a number to enable you to easily locate the chapter you want. Depending onthe disc, chapters may not be labeled.Track (Audio CD only)Sections of a movie or a musical piece on an audio CD. Each track is assigned a number, enabling you to easilylocate the track you want.About DVD RecordingNotes on Recording• The recording times shown are not exact because the DVD Recorder+VCR uses variable bit-rate videocompression. This means that the exact recording time will depend on the material being recorded.• When recording a TV broadcast, if the reception is poor or the picture contains interference, the recordingtimes may be shorter.• Discs recorded at high speeds (equal to or greater than 2X) may not be recognized.• If you record still pictures or audio only, the recording time may be longer.Which discs you can useThe following discs can be used in your DVD Recorder+VCR:Playback and recordingDVD+RW (Digital Versatile Disc + ReWritable)DVD+R (Digital Versatile Disc + Write-Once)Playback onlyDVD Video (Digital Versatile Disc)DVD-R (DVD-Recordable): These discs can only be played back if the recording was made in ‘Video mode‘ andthe recording was finalized.DVD-RW (DVD-Rerecordable): These discs can only be played back if the recording was made in ‘Video mode‘and the recording was finalized.Audio CD (Compact Disc Digital Audio)CD-R (CD recordable) Audio/ CD-RW (CD rewritable) AudioVideo Format : VCD / DivX / SVCD / MPEG4 / JPEG / Kodak Picture CDAudio Format : SACD / HDCD / CDDA / MP3 / MP3 Pro / MMANot all recordable CDs may be played by your player.OverviewDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지3
4Overview• The displayed times for recording and time remaining may not always add up to the exact length of thedisc.• The available recording time may decrease if you heavily edit a disc.• When using a DVD+R disc, you can keep recording until the disc is full, or until you finalize the disc. Beforeyou start a recording session, check the amount of recording time left on the disc.Recording TV Audio ChannelsThe DVD Recorder+VCR can record one or two channel audio. For TV broadcasts, this usually means mono orstereo, but some programs are broadcast with a main and a SAP (Secondary Audio Program) audio channel.You can record either the main audio or the SAP audio.Restrictions on Video Recording• You cannot record copy-protected video using this DVD Recorder+VCR. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording,recording will pause or stop automatically and an error message will be displayed on-screen.• Video that is ‘copy-once only’ can only be recorded using DVD+RW discs with CPRM.Copyright Notice• Audio and video recordings you make using the DVD Recorder+VCR are for your personal use only. You maynot sell, lend, or rent them to other people.• This product incorporates copyright protection technology that is protected by method claims of certainU.S.patents and other intellectual property rights owned by Macrovision Corporation and other rightsowners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and isintended for home and other limited viewing uses only unless otherwise authorized by Macrovisioncorporation. Reverse engineering or disassembly is prohibited.Handling the UnitWhen shipping the unitThe original shipping carton and packing materials come in handy. For maximum protection, re-pack theunit as it was originally packaged at the factory.When setting up the unitThe picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, positionthe unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.To keep the surface cleanDo not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic productsin contact with the unit for a long period of time. They will leave marks on the surface.Cleaning the UnitTo clean the cabinetUse a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a milddetergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damagethe surface of the unit.To obtain a clear pictureThe DVD Recorder+VCR is a high-tech, precision device. If the optical pick-up lens and disc drive parts aredirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended afterevery 1,000 hours of use. (This depends on the operating environment.) For details, please contact yournearest dealer.PrecautionsDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지4
INTRODUCTION5Remote Control Operation RangePoint the remote control at the remote sensor and press the buttons.Distance: Within 23 ft (7 m) of the remote sensor.Angle: Within 30° in each direction of the remote sensor.Remote Control Battery InstallationDetach the battery cover on the rear of the remote control, and insert two AAAbatteries. Make sure the polarities (+ and -) are aligned correctly.CautionDo not mix old and new batteries. Never mix different types of batteries (standard,alkaline, etc.).Handling DiscsDo not touch the playback side of the disc. Hold the disc by the edgesso that fingerprints will not get on the surface. Do not stick paper ortape on the disc.Storing DiscsAfter playing, store the disc in its case.Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to directsunlight, as there may be a considerable temperature increase inside the car.Cleaning DiscsFingerprints and dust on the disc can cause poor picture quality andsound distortion. Before playing, clean the disc with a clean cloth.Wipe the disc from the center outward.Do not use strong solvents such as alcohol, benzine, thinner,commercially available cleaners, or anti-static spray intended for oldervinyl records.Notes on DiscsAbout the Symbol‘ ‘ may appear on the TV screen during operation. This icon means the function explained in this User's Guideis not available on that specific disc.About SymbolsNoYesOverviewDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지5
6Front Panel!STANDBY/ONTurns the DVD Recorder+VCR on and off.Lock/Unlock the front panel and Remote controlby pressing and holding it over 5 seconds. @Cassette Compartment (VCR deck)Insert a video cassette here.#VCR EJECTEjects the tape in the VCR deck.$Disc Tray (DVD deck)Insert a disc here.%OPEN/CLOSEOpens or closes the disc tray.^REWDVD: Skips to previous chapter.VCR: Rewinds the tape during Stop mode. Pressduring Play mode for fast reverse picture search.&DISC MENUDisplays disc menu or title menu of DVD disc.*PLAY/PAUSEStarts playback of a disc or tape. Pauses playbackor recording temporarily. (STOPStops playback.)FFDVD: Skips to next chapter.VCR: Advances the tape during Stop mode. Pressduring Play mode for fast forward picture search.1REC SPEEDChanges Record speed.2SELECT DVD/VCRToggles control between the DVD deck and theVCR deck.Reset the DVD Recorder+VCR by pressing andholding it for 5 seconds.3Front Panel DisplayShows the current status of the DVDRecorder+VCR.4CH+/– Scans up or down through memorized channels.Also moves up and down in DVD navigationmenus.5RECStarts recording. Press repeatedly to set therecording time. Lights red when the DVDRecorder+VCR is recording.6LINE1 (VIDEO, L-AUDIO-R)Connects to the audio/video output of an externalsource (VCR, Camcorder, etc.).7DV INConnects to the DV output of a digital camcorder,video deck, or DVD+R/RW recorder.! @ # $ %62(&^ * 3 5 741)Identification of ControlsIdentification of ControlsDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지6
INTRODUCTION7Front Panel DisplayChannelIdentification of ControlsCH23TV ChannelC123CATV ChannelInput modeAu-1AV1 inputAu-2AV2 inputDVDV inputUSBUSB inputCopyCOPYDVD to VCR copyingCOPYVCR to DVD copyingRecording on disc 11:15Indicates a DVD Timer recording is set.11:15Indicates a DVD Timer Recording is instandby mode.11:15Indicates the DVD is recording. RECPRecording Pause mode0:30OTR Recording modeRecording on tape11:15Indicates a VCR Timer Recording is set.11:15Indicates a VCR Timer Recording is instandby mode.11:15Indicates the VCR is recording. RECPRecording Pause mode0:30OTR Recording modeOthersSAFEIndicates when the DVD Recorder+VCR is locked.TVIndicates the DVD Recorder+VCR is inTV mode (set by [TV/VCR] button).VCRIndicates the DVD Recorder+VCR is inVCR mode (set by [TV/VCR] button).I-SIndicates when the DVD Recorder+VCR is outputting the video signal inInterlaced Scan mode.P-SIndicates when the DVD Recorder+ VCRis outputting the video signal inProgressive Scan mode.DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지7
Starts recording. Press repeatedly to set the recording time. For moredetails, Refer to One Touch Record (OTR) on page 39.8Identification of ControlsRemote ControlTurns the DVD Recorder+VCR on and off.- Opens and closes the disc tray in DVD mode. - Ejects the tape in the VCR deck in VCR mode.Switches the DVD Recorder+VCR input to TV tuner, Line 1, Line 2, or DV.Selects DVD mode.Selects VCR mode.Switches between the DVD Recorder+VCR tuner and your TV tuner.Displays or exits the Setup menu.Displays information about the currently loaded disc, VHS tape, or TVchannel.Starts DVD playback automatically without searching DVD menu when youload a DVD disc.Confirms menu selections.- œ √…† : Selects menu options.- CH(+/–) : Selects channels. Accesses DVD disc menus.- Selects numbered options in menus. - Selects TV channels.- Manually adjusts tracking.Resets the tape counter in VCR mode. Increases or decreases the slow motion speed when playing a DVD or VHStape.Skips to the next or previous chapter/track.- DVD: Searches backward/forward.- VCR: Rewinds/advances during Stop mode. Press during Play mode forfast reverse/forward picture search.DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지8
INTRODUCTION9Displays a disc’s Title menu, if available.Selects a subtitle language, if available.Selects Recording mode: - DVD : HQ (1hr), SP (2hrs), EP (4hrs) or SLP (6hrs).- VCR : SP or SLP.Selects a DVD camera angle, if available.- Starts playback.- Pauses playback or recording temporarily. Press again to exit Pause mode.Stops playback or recording.Selects an audio language (DVD), audio channel (CD) or audio type (TV).Displays the edit menu for DVD+RW/+R discs or sets a chapter marker.Displays the disc operation for DVD+RW/+R discs.Displays the digest menu for DVD+RW/+R discs.Repeats the current chapter, track, title or the entire disc.Repeats playback between two points (A and B).Displays the Timer Recording menu.Enlarges the DVD video image.Progressive Scan ModeIf your TV supports Progressive Scan, you can view high quality video by setting the DVDRecorder+VCR to Progressive Scan mode. If your TV does not support Progressive Scan,do NOT change to Progressive Scan mode.If you do so accidentally, press and hold the [P.SCAN] key for 3 seconds to restorenormal viewing.Identification of ControlsDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지9
10!AC Power CordPlug into a power outlet.@AUDIO OUT (L, R)Connect to a TV or other equipment with audioinputs.#COMPONENT/PROGRESSIVE VIDEO OUT (Y Pb Pr)Connect to a TV with Component Video (Y Pb Pr)inputs.$AV OUT (VIDEO, L-AUDIO-R)Connect to a TV with video and audio inputs.%LINE2 (VIDEO, L-AUDIO-R)Connect to the audio/video outputs of an externalsource (VCR, Camcorder, etc.).^RF IN (FROM ANT.)Connect to your antenna or cable TV outlet.&RF OUT (TO TV)Connect to a TV with an RF coaxial input.*COAXIAL (Digital Audio Out)Connect to an amplifier with a coaxial digitalaudio input.(S-VIDEO OUTConnect to a TV with an S-Video Input.Rear panelIdentification of ControlsS-VIDEOOUTOUTDIGITALAUDIO OUTAUDIO OUT COMPONENT OUT LINE 2AUDIOVIDEOLRLRCOAXIALYPbPrRF OUTANT. INDVD & VCR OUT! @# $% ^( * &CautionDo not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage tothe DVD Recorder+VCR.DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지10
INTRODUCTION11Connecting Antenna/CableCONNECTIONS1Disconnect the antenna/cable from the rear of yourTV. 2Connect this cable to the jack marked RF IN (FROMANT.) on the rear panel of the DVD Recorder+VCR.Cable Service Without Cable BoxIf your cable wire is connected to your TV without aconverter or descrambler box, unscrew the wire from your TV and attach it to the RF IN (FROM ANT.) jack on therear panel of the DVD Recorder+VCR.Use the supplied coaxial cable to connect between the DVD Recorder+VCR’s OUT (TO TV) jack and the antennainput jack on your TV. With this connection, you can receive all midband, superband, and hyperband channels(all cable channels).Cable Service With Cable BoxIf a cable box is required in your cable system, followthe instructions shown at right. This hookup permitsboth TV and DVD Recorder+VCR operation.To view or record a CATV channel:1Tune the TV to the correct video input channel.2Set the DVD Recorder+VCR to the output channel ofthe cable box using the [CH …/†] or the [0-9] keyson your DVD Recorder+VCR (e.g., CH3).3Select the channel you wish to view on the cablebox.• There are a variety of ways to connect the DVD Recorder+VCR to your TV and other equipment. Use only one ofthe connections described below. Whichever TV connection you use will work with all input sources.• Please refer to the manuals for your TV, VCR, stereo system, or other devices as necessary to make the bestconnections.• For better sound reproduction, connect the DVD Recorder+VCR’s AUDIO OUT jacks to the audio in jacks of youramplifier, receiver, stereo, or audio/video equipment. See ‘Connecting an Amplifier/Receiver‘ on page 13.If you are using a cable box to tune channels, it is not necessary to run Auto Channel Search as indicated on page 18.Caution• Make sure the DVD Recorder+VCR is connected directly to the TV, and the TV is set to the correct video input.• Do not connect the DVD Recorder+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.• Do not connect the DVD Recorder+VCR via your VCR. The DVD image could be distorted by the copy protectionsystem.DEOTOUTDIGITALAUDIO OUTAUDIO OUT COMPONENT OUT LINE 2AUDIOVIDEOLRLRCOAXIALYPbPrRF OUTANT. INDVD & VCR OUTAntenna AntennaFlat Wire(300 ohm)300/75 ohmAdaptor(Not supplied)Cable TVWall JackOR ORRear of DVD Recorder+VCREOTOUTDIGITALAUDIO OUTAUDIO OUT COMPONENT OUT LINE 2AUDIOVIDEOLRLRCOAXIALYPbPrRF OUTANT. INDVD & VCR OUTCable TVWall JackBack Panel ofTypical Cable BoxRear of DVD Recorder+VCRConnectionsConnectionsDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지11
12Progressive Scan Connection• If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the DVDRecorder+VCR’s Progressive Scan output for the highest video resolution possible.• If your TV does not accept the Progressive Scan format, the picture will appear scrambled.1Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the correspondingin jacks on your TV using an optional Y Pb Pr cable (C).2Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks onyour TV using the supplied audio cables (A).Choose one of the following TV connections, depending on the capabilities of your equipment.RF Coaxial ConnectionConnect the RF OUT (TO TV) jack on the DVDRecorder+VCR to the antenna in jack on your TV usingthe supplied coaxial cable (R). If you use thisconnection, tune your TV to the DVD Recorder+VCR’sRF output channel (CH 3 or 4).How to set the DVD Recorder+VCR’s RF output channelPress [SETUP] and select Installation ➝ModulatorOut to change the RF out channel. For details refer topage 18.Audio/Video Connection1Connect the VIDEO OUT jack on the DVDRecorder+VCR to the video in jack on your TVusing the supplied video cable (V). 2Connect the Left and Right AUDIO OUT jacksfrom the DVD Recorder+VCR to the left/right audio in jacks on your TV using the supplied audio cables (A).S-Video Connection1Connect the S-VIDEO OUT jack on the DVD Recorder+VCR to the S-Video in jack on your TV using an S-Video cable (S).2Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks onyour TV using the supplied audio cables (A).Component Video Connection1Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the correspondinginput jacks on your TV using a Y Pb Pr cable (C) if the Component Video jacks (Y, Pb, Pr) are available onyour TV.2Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks onyour TV using the supplied audio cables (A).Connecting a TVConnectionsAll video signals are available from all video outputs. That means that whichever TV connection you use, it willwork with all input sources, including VHS out of the Component/Progressive Video Output.• Be sure to set the DVD Recorder+VCR to Progressive Scan mode by pressing and holding [P.SCAN] for 3 seconds(or changing the Scan Mode in the Setup Menu; see page 21).• Progressive Scan does not work with the RF, Audio/Video or S-Video connections.ANTENNAINPUTLRYPbPrCOMPONENT/PROGRESSIVE VIDEO INPUTAUDIO INPUTVIDEO INPUTS-VIDEO INPUTRear of TVS-VIDEOOUTOUTDIGITALAUDIO OUTAUDIO OUT COMPONENT OUT LINE 2AUDIOVIDEOLRLRCOAXIALYPbPrRF OUTANT. INDVD & VCR OUTRear of DVD Recorder+VCRRS AVCDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지12
CONNECTIONS13Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro LogicConnect the Left and Right AUDIO OUT jacks on the DVD Recorder+VCR to the left and right audio in jacks onyour amplifier, receiver, or stereo system, using the supplied audio cables (A).Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equippedwith a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)1Connect the DVD Recorder+VCR’s DIGITAL AUDIO OUT jack (COAXIAL X) to the corresponding in jack onyour amplifier. Use an optional digital coaxial audio cable.2You will need to activate the DVD Recorder+VCR’s digital output; see ‘AUDIO Settings‘ on page 22.Digital Multi-Channel Sound?A digital multi-channel connection provides the best sound quality. For this you need a multi-channelaudio/video receiver that supports one or more of the audio formats supported by your DVD Recorder+VCR(MPEG 2, Dolby Digital, and DTS). Check the receiver manual and the logos on the front of the receiver.Connecting an Amplifier/Receiver• Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream isselected.• If the audio format of the digital output does not match the capabilities of your receiver, the receiver will producea strong, distorted sound or no sound at all.• 5.1 channel digital surround sound via the digital connection can only be obtained if your receiver is equipped witha digital multi-channel decoder.• To see the audio format of the current DVD on the on-screen display, press [AUDIO].The DVD Recorder+VCR does not perform internal (2- channel) decoding of DTS sound tracks. To enjoy DTS multi-channel surround, you must connect the DVD Recorder+VCR to a DTS compatible receiver via one of the DVDRecorder+VCR’s digital audio outputs.Amplifier (Receiver)RLAUDIO INPUT DIGITAL INPUTCOAXIALS-VIDEOOUTOUTDIGITALAUDIO OUTAUDIO OUT COMPONENT OUT LINE 2AUDIOVIDEOLRLRCOAXIALYPbPrRF OUTANT. INDVD & VCR OUTRear of DVD Recorder+VCRA XConnectionsDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지13
14ConnectionsTo receive audio/video signals from other equipment,connect the LINE1 or LINE2 jacks on the DVDRecorder+VCR to the audio/video out jacks on yourexternal component, using optional audio/video cables.Connecting Optional EquipmentOUT LINE 2AUDIOVIDEOLRRF OUTANT. INUsing the front panel DV IN jack, it is possible to connect a DV digital camcorder, video deck or DVD+R/RWrecorder and digitally transfer DV tapes or DVD+R/RW discs to DVD+R/RW.Use a DV cable (not supplied) to connect the DV In/Out jack of your DV camcorder/video deck to the front panelDV IN jack of the DVD Recorder+VCR.Connecting a Digital CamcorderThis jack is for connection to DV equipment only. It is notcompatible with digital satellite tuners or D-VHS videodecks.DV INDV Digital CamcorderFront of DVD Recorder+VCRDVIN/OUTDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지14
CONNECTIONS SETUP15After successfully connecting your DVD Recorder+VCR to your TV and otherdevices, this chapter will show you how to complete the initial installation.1A ‘Welcome‘ message is displayed on the screen. Make sure the RF cablefrom your antenna or cable TV jack is connected.2Select the desired language for the on-screen menu using […/†]. Press[ENTER] to confirm.3Select the desired disc menu language using […/†]. Press [ENTER] toconfirm.4Select the desired disc playback audio language using […/†]. Press[ENTER] to confirm.Initial InstallationInstallationPlease select your language to begin autoinstall procedure:EnglishSpanishFrenchInstructionsEnter-Confirm Setup-Exit Move …†InstallationPlease select disc menu language:DefaultEnglishSpanishFrenchItalianJapaneseChineseInstructionsEnter-Confirm Setup-Exit Move …†InstallationPlease select disc play back audiolanguage:DefaultEnglishSpanishFrenchItalianJapaneseChineseInstructionsEnter-Confirm Setup-Exit Move …†InstallationWelcome.Press [Enter] to begin auto channel search.Ensure antenna is connected.InstructionsSetup-ExitYou must follow the initial installation process to set the time, date, channels,and language preferences for the DVD Recorder+VCR.Initial InstallationInitial InstallationDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지15
165Select the desired disc playback subtitle language using […/†]. Press[ENTER] to confirm.6Select the desired signal type using […/†]. Press [ENTER] to confirm.7The DVD Recorder+VCR detects channels automatically and stores themin memory.8After finishing Auto Channel Search, set the clock.9Use [œ/√] to move left/right and use […/†] to change the settings.10After setting the clock, press [ENTER] to confirm. If you cancel the processduring Initial Installation, you should repeat this procedure.Initial InstallationInstallationPlease select disc play back subtitlelanguage:DefaultEnglishSpanishFrenchItalianJapaneseChineseOffInstructionsEnter-Confirm Setup-Exit Move …†InstallationWhat type of signal are you using?Cable TVAntennaDetect AutomaticallyInstructionsEnter-Confirm Setup-Exit Move …†InstallationSearching for available TV stations:2 channels foundPlease wait...InstructionsSetup-ExitSet ClockPlease set the clock:Time : 12 : 00 AMDate : Jan / 01 / 2005 (SAT)InstructionsEnter-Confirm Setup-Exit Move …†…†DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지16
Tuning Band1Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setuppage.2Use [œ/√] to select ‘Installation Page ‘.3While ‘Installation Page ‘ is selected, press [†] to select‘TV/CATV‘.4Press [√] to move to the second level.5Use […/†] to select TV or CATV, then press [ENTER].TV: If you are using a standard antenna to receive channels.CATV: If you are using basic cable to receive channels.SETUP17The DVD Recorder+VCR Setup menu includes four categories, including: Initial Setup, Disc Operation, Disc Editand Timer Recording. Press [SETUP], [œ/√] and [ENTER] on the remote control to view the first and secondlevels of the Setup menu.1. Initial Setup Screen 2. Disc Operation Screengo to page 17~27. go to page 47~49.3. Disc Edit Screen 4. Timer Recording Screengo to page 50~52. go to page 42~43.Setup Menu OverviewINSTALLATION SettingsIf you are receiving channels from a cable box or satellite receiver connected to the LINE1 or LINE2 inputs, there is noneed to set Tuning Band or search for channels. Set the DVD Recorder+VCR to its LINE1 or LINE 2 input and select thedesired channel on your cable box or satellite receiver.Initial SetupInitial SetupDVD RecorderInit Setup ➞Init Setupœ √SelectInit Setup Disc Oper Disc Edit Timer RECDVD RecorderInit Setup ➞Disc Operationœ √SelectInit Setup Disc Oper Disc Edit Timer RECDVD RecorderInit Setup ➞Disc Editœ √SelectInit Setup Disc Oper Disc Edit Timer RECDVD RecorderInit Setup ➞Timer RECœ √SelectInit Setup Disc Oper Disc Edit Timer REC- - Installation Page - -•TV/CATV TVAuto Scan • CATVCH Add/DelModulator OutClock SettingChoose OK ExitENTER SETUPœ √…†DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지17
Modulator Out This feature allows you to set the RF Output channel to your TV (you onlyneed to set this if you are using the RF Out connection to your TV).1Follow steps 1-2 as shown under Tuning Band.2Use […/†] to select ‘Modulator Out‘.3Press [√] to move to the second level. 4Use […/†] to set the Modulator Out channel to ‘CH3’ or ‘CH4’.5Press [ENTER] to confirm.18Initial SetupAuto Channel SearchThe DVD Recorder+VCR has a frequency synthesized tuner capable ofreceiving up to 181 channels. These include VHF channels 2-13, UHFchannels 14-69 and CATV channels 1-125.Preparation:Connect the DVD Recorder+VCR to the desired type of antenna or cable TVsystem, as shown in ‘Connecting Antenna/Cable‘ on page 11.1Follow steps 1-2 as shown under Tuning Band.2While ‘Installation Page ‘ is selected, press […/†] to select ‘Auto Scan‘.3Press [ENTER] to begin the channel search.The tuner will automatically search for all available channels in your area and place them in the tuner’smemory.After Auto Channel Search is complete, follow the instructions above to make sure that Tuning Band is set correctly(TV or CATV).Add/Remove ChannelsThis feature allows you to manually add or delete channels from yourchannel list.1Follow steps 1-2 as shown under Tuning Band.2Use […/†] to select ‘CH Add/Del‘.3Press [ENTER]. The Channel Add/Delete menu appears.4Use [CH+/-] or [0-9] to select a channel then toggle the add/deleteselection by pressing [œ/√].5Press [SETUP] to exit the Channel Add/Delete menu.- - Installation Page - -TV/CATV•Auto ScanCH Add/DelModulator OutClock SettingChoose OK ExitENTER SETUPœ √…†CancelAuto Scan CATV113/125Please wait...- - Installation Page - -TV/CATVAuto Scan•CH Add/DelModulator OutClock SettingChoose OK ExitENTER SETUPœ √…†DeleteCH Add/Delœ √CH SelectOKConfirm ExitENTER0-9CH + –- - Installation Page - -TV/CATVAuto ScanCH Add/Del•Modulator Out • CH3Clock Setting CH4Choose OK ExitENTER SETUPœ √…†DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지18
Auto ChapterDuring recording, chapter markers are added automatically at fixedintervals. You can set this interval to 5 Min, 10 Minor 15 Min. To turn off automatic chapter marking, select ‘Off ‘.Follow the same procedure as the DVD Record Quality.SETUP19Set Clock1Follow steps 1-2 as shown under Tuning Band.2Use […/†] to select ‘Set Clock‘.3Press [ENTER]. The Set Clock menu appears.4Enter the date and time.œ/√(left/right): Moves the cursor to the previous or next column.…/†(up/down): Changes the setting at the current cursor position.5Press [ENTER] to confirm your setting, then press [SETUP] to exit the Setup menu.Initial SetupDVD Record QualityYou can set the default DVD recording quality to: HQ (High Quality - 1hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Average Quality - 4 hrs/disc),or SLP (Low Quality - 6 hrs/disc).1Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setuppage.2Use [œ/√] to select ‘Record Options Page ‘.3While ‘Record Options Page ‘ is selected, press [†] to select ‘DVD Quality‘.4Press [√] to move to the second level.5Use […/†] to to select the desired Record Quality (HQ, SP, LP, EP, SLPor SEP).6Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.RECORDING OPTIONS Settings- - Installation Page - -TV/CATVAuto ScanCH Add/DelModulator Out•Clock SettingChoose OK ExitENTER SETUPœ √…†- - Record Options Page - -•DVD Quality •HQChapter Mark SPVCR Quality LPEPSLPSEPChoose OK ExitENTER SETUPœ √…†- - Record Options Page - -DVD Quality•Chapter Mark OffVCR Quality • 5Min10Min15MinChoose OK ExitENTER SETUPœ √…†Clock Setting…2005 1 1 2 42 AM†DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지19
OSD LanguageSelect a language for the DVD Recorder+VCR Setup menu and on-screendisplays.1Press [SETUP]. The Setup menu appears.While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setuppage.2Use [œ] and [√] to select ‘Languages Page ‘.3While ‘Language‘ is selected, press [†] to select ‘OSD Lang‘.4Press [√] to move to the second level.5Use […/†] to select the desired language.6Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.Menu/Subtitle/Audio LanguageSelect your preferred language for Disc Menus, Subtitles, and Audiosoundtracks.Default : The disc’s default language is selected.Follow the same procedure as the OSD Language.LANGUAGE Settings20Initial SetupVCR Record QualityYou can set the default VCR recording quality to SP(Standard Play) or SLP(Super Long Play). SP is higher quality, but SLP provides 3 times the recording time; e.g., a 2hour tape will record for 6 hours in SLP mode.Follow the same procedure as the DVD Record Quality.- - Record Options Page - -DVD QualityChapter Mark •VCR Quality SLP•SPChoose OK ExitENTER SETUPœ √…†- - Languages Page - -•OSD Lang • EnglishMenu Lang FrançaisSubtitle Lang EspanolAudio LangChoose OK ExitENTER SETUPœ √…†- - Languages Page - -OSD Lang•Menu Lang • DefaultSubtitle Lang EnglishAudio Lang FrenchSpanishItalianJapaneseChineseChoose OK ExitENTER SETUPœ √…†- - Languages Page - -OSD LangMenu Lang•Subtitle Lang • OffAudio Lang EnglishFrenchSpanishItalianJapaneseChineseChoose OK ExitENTER SETUPœ √…†- - Languages Page - -OSD LangMenu LangSubtitle Lang • Default•Audio Lang EnglishFrenchSpanishItalianJapaneseChineseChoose OK ExitENTER SETUPœ √…†DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지20
SETUP211Press [SETUP]. The Setup menu appears.While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setuppage.2Use [œ/√] to select ‘Preference Page ‘.3While ‘Preference Page ‘ is selected, press [†] to select ‘Video‘.4Press [√]. The ‘Video‘ submenu is displayed.TV Aspect Ratio1Use […/†] to select ‘TV Aspect‘ while the ‘Video‘ submenu isdisplayed.2Press [√] to go to the second level.3Use […/†] to select the desired TV Aspect.4Press [ENTER] to confirm your selection.5Press [SETUP] to exit the menu.4:3 LB : Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above andbelow the picture.4:3 PS : Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Bothsides of the picture are cut off.16:9 : Select when a 16:9 wide screen TV is connected.Auto : Convert to the appropriate aspect ratio automatically.Scan ModeProgressive Scan Video provides the highest picture quality with reducedflickering.• If you are using the COMPONENT/PROGRESSIVE VIDEO OUT jacks, butare connecting the DVD Recorder+VCR to a standard (analog)television, set Scan Mode to Interlace.• If you are using the COMPONENT/PROGRESSIVE VIDEO OUT jacks forconnection to a TV or monitor that is compatible with a ProgressiveScan signal, set Scan Mode to Progressive.Follow the same procedure as TV Aspect Ratio to change the Scan Mode.CautionOnce the Progressive Scan setting is entered, an image will only be visible on a Progressive Scan compatible TV ormonitor. Press and hold [P.SCAN] for 3 seconds to return to Interlace Scan mode.PREFERENCE / Video SettingsInitial Setup- - Preference Page - -Video • TV Aspect 4:3 PSAudio Scan Mode InterlaceParental CtrlAuto ClockVCRAutoPlayYourDVDChoose OK ExitENTER SETUPœ √…†- - Preference Page - -Video TV Aspect • 4:3 LBAudio Scan Mode 4:3 PSParental Ctrl 16:9Auto Clock AutoVCRAutoPlayYourDVDChoose OK ExitENTER SETUPœ √…†- - Preference Page - -Video TV Aspect Audio Scan Mode • InterlaceParental Ctrl ProgressiveAuto ClockVCRAutoPlayYourDVDChoose OK ExitENTER SETUPœ √…†DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지21
Follow the same procedure as Video Settings to select Audio Settings.Digital Output1Use […/†] to select ‘Digital Output‘ while the Audio submenu isdisplayed.2Press [√] to go to the second level.3Use […/†] to select the desired digital output type.4Press [ENTER] to confirm your selection.5Press [SETUP] to exit the menu.OffNo signal will be output from the Digital Audio Out jacks.LPCMSelect when connected to a 2 channel digital stereo amplifier. The DVD Recorder+VCR's digital audio signal willbe output in the PCM 2ch format when you play a DVD (or VHS tape) recorded with a Dolby Digital (only forDVD) or MPEG soundtrack. If the DVD is recorded with a DTS sound track then no sound will be heard.BitstreamSelect when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a DolbyDigital or DTS decoder).Dynamic RangeWhile watching DVD movies, you may wish to compress the dynamic rangeof the audio output (the difference between the loudest and quietestpassages). This allows you to listen to a movie at a lower volume withoutlosing clarity of sound. Set ‘Dynamic‘ to Low or Highfor this effect.Follow the same procedure as ‘Digital Output‘ to set the Dynamic Range.Virtual SurroundYou can enjoy a simulated 3D effect from two speakers by setting ‘V SURR(Virtual Surround)’ to On.Follow the same procedure as ‘Digital Output‘ to set the Virtual Surroundoption.PREFERENCE / Audio Settings22Initial Setup- - Preference Page - -VideoAudio • Digital Output BitstreamParental Ctrl Dynamic OffAuto Clock V SURR OffVCR VCR Reception SAPAutoPlay Tape Playback Hi-FiYourDVDChoose OK ExitENTER SETUPœ √…†- - Preference Page - -VideoAudio Digital Output • BitstreamParental Ctrl Dynamic LPCMAuto Clock V SURR OffVCR VCR ReceptionAutoPlay Tape PlaybackYourDVDChoose OK ExitENTER SETUPœ √…†- - Preference Page - -VideoAudio Digital OutputParental Ctrl Dynamic • OffAuto Clock V SURR LowVCR VCR Reception HighAutoPlay Tape PlaybackYourDVDChoose OK ExitENTER SETUPœ √…†- - Preference Page - -VideoAudio Digital OutputParental Ctrl DynamicAuto Clock V SURR • OffVCR VCR Reception OnAutoPlay Tape PlaybackYourDVDChoose OK ExitENTER SETUPœ √…†DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지22
SETUP23Initial SetupVCR ReceptionSelect your desired audio source for VCR recording (Stereo, Mono, or SAP).Follow the same procedure as ‘Digital Output‘ to set the VCR Receptionoption.Tape Play BackSelect your desired audio signal for VHS tape playback (Hi-Fi or Linear).Follow the same procedure as ‘Digital Output‘ to change the Tape Play Backoption.- - Preference Page - -VideoAudio Digital OutputParental Ctrl DynamicAuto Clock V SURRVCR VCR Reception • StereoAutoPlay Tape Playback MonoYourDVD SAPChoose OK ExitENTER SETUPœ √…†- - Preference Page - -VideoAudio Digital OutputParental Ctrl DynamicAuto Clock V SURRVCR VCR ReceptionAutoPlay Tape Playback • Hi-FiYourDVD LinearChoose OK ExitENTER SETUPœ √…†DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지23
Set Parental LevelThe Parental Controls feature allows you to prevent DVDs from being played based on their ratings or to havecertain discs played with alternative scenes. You can set the parental level from 1 to 8.1Press [SETUP]. The Setup menu appears.While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page.2Use [œ/√] to select ‘Preference Page ‘.3While ‘Preference Page ‘ is selected, press [†] to select ‘ParentalCtrl‘.4Press [√] to select ‘Parental‘. Then press [√] again to change parentallevel. 5Use […/†] to select the desired parental level and press [ENTER] toconfirm. Off : If you select Unlock, the Lock feature is not active. All discs willplay in full.Level 1 to 8: Some discs contain scenes not suitable for children. If youset a rating for the DVD Recorder+VCR, all scenes with the same ratingor lower will be played. Higher rated scenes will not be played unlessan alternative scene is available on the disc. The alternative must have the same rating or a lower one. Ifno suitable alternative is found, playback will stop. You must enter the 4-digit password or change therating level in order to play the disc.6The Password Input dialog will appear. Enter a 4-digit password using the 0-9buttons. If this is the first time you have entered a password, you will be prompted toenter the password again to confirm it.7After setting the password, press [ENTER] while 'Set Parental Level' isdisplayed.8Press [ENTER] to confirm your rating selection, then press [SETUP] toexit the menu.The initial password is ‘0000‘. You must enter this password before you canchange the Parental Level.PREFERENCE / Parental Controls24Initial Setup- - Preference Page - -VideoAudio•Parental Ctrl Parental 8 ADULTAuto Clock PasswordVCRAutoPlayYourDVDChoose OK ExitENTER SETUPœ √…†- - Preference Page - -Video OffAudio 1 KID SAFEParental Ctrl Parental 2 GAuto Clock Password 3 PGVCR 4 PG 13AutoPlay 5 PGRYourDVD 6 R•7 NC 178 ADULTChoose OK ExitENTER SETUPœ √…†- - Preference Page - -VideoAudioParental Ctrl • Parental 7 NC 17Auto Clock PasswordVCRAutoPlayYourDVDChoose OK ExitENTER SETUPœ √…†- - Preference Page - -VideoAudioParental Ctrl • Parental 8 ADULTAuto Clock PasswordVCRAutoPlayYourDVDChoose OK ExitENTER SETUPœ √…†Input PasswordOld PasswordInput digitsSelect OKOK CancelENTER0-9œ √…†DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지24
Change Password1While ‘Preference Page ‘ is selected, press [†] to select ‘ParentalCtrl‘.2Select ‘Password‘ then press [√] to select ‘Change‘. 3Press [ENTER]. The Input Password submenu appears. Enter your current 4-digitpassword then press [ENTER].4Enter a new 4-digit password, then press [ENTER]. Re-enter the new password toconfirm, press [ENTER].SETUP25•Master Password : If you forget your password, press 3,3,0,8 on the remotecontrol and then press [ENTER].• Set the new password to something other than '0000'.Initial SetupInput PasswordOld PasswordNew PasswordConfirm PasswordInput digitsSelect OKOK CancelENTER0-9œ √…†- - Preference Page - -VideoAudioParental Ctrl ParentalAuto Clock • Password ChangeVCRAutoPlayYourDVDChoose OK ExitENTER SETUPœ √…†- - Preference Page - -VideoAudioParental Ctrl ParentalAuto Clock Password • ChangeVCRAutoPlayYourDVDChoose OK ExitENTER SETUPœ √…†DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지25
VCRThis feature enables you to search for Index marks or specific times on your VHS tapes.1Use […/†] to select ‘VCR‘.3Press [√] to display the submenu.4Select ‘Index Search’ or ‘Go-To Search’.5If you select ‘Index Search’ and press [ENTER], a submenu appears.Use […/†] to select the index number you want to search and press[REW] or [FF].6If you select ‘Go-To Search’ and press [ENTER], a submenu appears. Use […/†] to change the time counter number and press [REW] or[FF].The VCR menu is activated only when a video cassette tape is inserted.Auto ClockAuto Clock enables the DVD Recorder+VCR to set the clock automaticallywhenever it is in Standby mode (plugged in but powered off).1Use […/†] to select ‘Auto Clock‘.2Press [√] to go to the second level.3Use […/†] to set the Auto Clock Status to Onor Off.4Press [ENTER] to confirm.Various PREFERENCE Settings26Initial Setup- - Preference Page - -VideoAudioParental Ctrl Auto Clock • OffVCR OnAutoPlayYourDVDChoose OK ExitENTER SETUPœ √…†- - Preference Page - -VideoAudioParental Ctrl Auto ClockVCR •Index SearchAutoPlay Go-To Search YourDVDChoose OK ExitENTER SETUPœ √…†Index SearchPress REW or FF to begin search or enter a specific index number.… 01†- - Preference Page - -VideoAudioParental Ctrl Auto ClockVCR Index SearchAutoPlay • Go-To Search YourDVDChoose OK ExitENTER SETUPœ √…†Go-To SearchCurrent Tape Counter is00 : 00 : 00Press REW or FF to go to… 01 : 01 : 00†DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지26
SETUP27AutoPlayWith Auto Play turn ON (the factory default setting), the VCR automaticallystarts playback when you insert a tape with its safety tab removed.1Use […/†] to select ‘AutoPlay‘.2Press [√] to go to the second level.3Use […/†] to set the AutoPlay Status to Onor Off.4Press [ENTER] to confirm.YourDVD???????1Use […/†] to select ‘YourDVD‘.2Press [√] to go to the second level.3Use […/†] to set the YourDVD Status to Onor Off.4Press [ENTER] to confirm.• Some options cannot be reset, including Parental Controls, Password, and Country Code.• After Restoring Defaults the unit reboots automatically and the Installation menuappears. You must set the country, language, channel, and clock settings again.If you wish, you can reset the DVD Recorder+VCR to its original factorysettings. 1Press [SETUP].2Use [œ/√] to select ‘Restore Defaults Page ‘.3Press [ENTER].4The Initialize menu will appear. Use the […†œ √] buttons to select‘OK‘ and press [ENTER].System InformationSystem Information helps service personnel identify key firmwareinformation about your DVD Recorder+VCR in case service is required.Restore DefaultsInitial Setup- - Preference Page - -VideoAudioParental Ctrl Auto ClockVCRAutoPlay • OffYourDVD OnChoose OK ExitENTER SETUPœ √…†- - Preference Page - -VideoAudioParental Ctrl Auto ClockVCRAutoPlayYourDVD •OffOn Choose OK ExitENTER SETUPœ √…†- - System Info Page - -Version 0000BBBBTTMain Build VER0049.04Micom Software 1.0.1Loader Version AA0600 A100Choose OK ExitENTER SETUPœ √…†- - Restore Defaults Page - -If you select this function all settingswill be removed and the product will beset into initial (factory) mode.Choose OK ExitENTER SETUPœ √…†Your DVDAudio Language XSubtitle Language VSurround Mode XOKRestore DefaultsAre you sure you want to restoredefault settings?OK CancelDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지27
28The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loadeddisc or tape. To access the On-Screen Display (or OSD), press the [DISPLAY] button.1During disc playback, press [DISPLAY] to show information about the current disc.2While the disc information is displayed, press [DISPLAY] again to show the disc status window.Displaying DVD InformationOn-Screen Display OverviewOn-Screen Display Overview00:00:25 01:04:02DVD Video »STOP√√Title : Shows the current title number and total number of titles, and skips to the desired titlenumber.Chapter : Shows the current chapter number and total number of chapters, and skips to thedesired chapter number.Time Elapsed : Shows the elapsed playing time, and skips to the desired time.Audio : Shows the current audio soundtrack language, encoding method, and channel number,and changes the setting; AC3 5.1 CH English or AC3 2 CH EnglishSubtitle : Shows the current subtitle language, and changes the setting; Off, English, French orSpanishRepeat : Shows the current repeat mode, and changes the setting; Chapter, All or OffA-B Repeat : Shows the current A-B repeat mode, and changes the setting; A-, A-B or OffRandom Repeat : Shows the current random repeat mode, and changes the setting; On or OffOSD Language : Shows the current OSD language, and changes the setting; English, French orSpanish1Press [DISPLAY] during playback. The on-screen display appears on the TV screen.2Use [œ√] to select the desired icon on the on-screen display. Press [ENTER] to display a submenu.3Use […†] to change the numbers. Press [ENTER] to confirm.• Displaying icons on DVD discChanging menu options in display menuDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지28
PLAYBACK29On-Screen Display Overview• Displaying icons on CDDA discTrack : Shows the current track number and total number of tracks, and skips to the desiredtrack number.Time Elapsed : Shows the elapsed playing time, and skips to the desired time.Audio Effect : Shows the current audio effect, and changes the setting; L-Mono, R-Mono, Stereoor Mix-MonoSound Effect : Shows the current sound effect, and changes the setting; Off, Concert, LivingRoom, Hall, Bathroom, Cave, Area or ChurchRepeat : Shows the current repeat mode, and changes the setting; Track, All or OffA-B Repeat : Shows the current A-B repeat mode, and changes the setting; A-, A-B or OffRandom Repeat : Shows the current random repeat mode, and changes the setting; On or OffOSD Language : Shows the current OSD language, and changes the setting; English, French orSpanish• Displaying icons on DivX, Mpeg discTrack : Shows the current track number and total number of tracks, and skips to the desiredtrack number.Time Elapsed : Shows the elapsed playing time, and skips to the desired time.Audio Effect : Shows the current audio effect, and changes the setting; MPEGSubtitle : Shows the current DivX subtitle language, and changes the setting.A-B Repeat : Shows the current A-B repeat mode, and changes the setting; A-, A-B or OffRepeat : Shows the current repeat mode, and changes the setting;Folder, Single, Repeat One,Repeat Folder or RandomSound Effect : Shows the current sound effect, and changes the setting; Off, Concert, LivingRoom, Hall, Bathroom, Cave, Area or ChurchOSD Language : Shows the current OSD language, and changes the setting; English, French orSpanishDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지29
30On-Screen Display OverviewSome TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change theTV audio using the [AUDIO] button.Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.• STEREO+SAP Audio Signal : Stereo ➝ Mono (No display) ➝ SAP ➝ Stereo• STEREO Audio Signal : Stereo ➝ Mono (No display) ➝ Stereo• SAP Audio Signal : Mono ➝ SAP ➝ Mono• MONO Audio Signal : Mono (No display)The current audio channel is displayed on-screen.• If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio channel.• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.• When an external input is selected, the audio channel can be switched only to Stereo.Changing the TV Audio ChannelChanging TV ChannelsIf no disc is playing, you can change TV channels using the [0-9] or [CH +/-] buttons on the remote control or [CH…/†] buttons on the front panel.Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125.The On-Screen Display provides feedback on the status of the DVDRecorder+VCR and/or the currently loaded tape. To access the On-ScreenDisplay (or OSD), press the [DISPLAY] button.While watching TV, press [DISPLAY] to display/remove the on-screen display.If no rewritable DVD disc is inserted, you would see a screen like the following:If a DVD+R or DVD+RW disc is inserted, the disc information is displayed at thefirst key press. If you press [DISPLAY] again then the TV information isdisplayed.Displaying TV InformationDisplaying VCR InformationInput : Tuner DVD-Video CH-6 02:26 AM■STOPInput : Tuner CH-6 02:26 AM■STOPDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지30
PLAYBACK31DVD PlaybackDVD Playback1Press the [DVD] button to set the remote control to operate the DVD deck.2Turn the TV on and select the video input source connected to the DVD Recorder+VCR.Audio system: Turn the audio system on and select the input source connected to the DVDRecorder+VCR.When a DVD+RW or unfinalized DVD+R is inserted, no title is played automatically but the current TV channeldisplays on the screen. 1If you want to play a title on the DVD+R (+RW), you must press[MENU] or [PLAY] to display the disc menu of a thumbnail index foreach recorded title on the disc. The index picture screen of the title will be displayed. Also titleinformation (name of recording, recorded day, time, recordingquality) will be displayed.2Select a title to play using [œ √] then press [ENTER] or [PLAY].Playing a DVD+R (+RW) If a Disc menu is displayed• A Disc menu may be displayed when you load a DVD. Use the [œ √…†] buttons to select the title/chapter youwant to view, then press [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu.• If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code mustbe entered and/or the disc must be authorized; see ‘Set Parental Level‘ on page 24.• The DVD Recorder+VCR will not play discs with Region codes different from the DVD Recorder+VCR. The Regioncode for this DVD Recorder+VCR is 1 (one).• Unless stated otherwise, all operations described below use the remote control. Some features may also beavailable in the Setup menu.• A disc which is recorded by computer at high speeds (greater than or equal to 2x) may not be recognized.• A disc which is recorded with unauthorized movie material may not be played.• A disc which is recorded by other recorder or not recorded correctly may not be recognized or played.DVD SelectedActions are nowfor DVD■Stop1Press [EJECT] to open the disc tray.2Load your disc in the tray with the playback side down (label side up).3Press [EJECT] to close the tray.4READING appears on the front panel display, and playback starts automatically. If playback does not start,press [PLAY (√)]. In some cases, the Disc menu might appear instead.Playing a DVDTITLE CH1010:29AM 12/21/040:01:00SEP●Press REC to overwrite title(s).TITLE CH1010:34AM 12/25/040:01:00HQEMPTY1:50:54SPBefore You BeginDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지31
32DVD PlaybackStill Picture and Frame-by-Frame Playback1Press [PLAY/PAUSE] during playback. The DVD Recorder+VCR will go into Pause mode.2You can back up or advance the picture frame-by-frame by pressing [FF (√√ )] repeatedly during Pausemode.Fast Forward/Backward1Press [REW (œœ )] or [FF (√√ )] during playback. The DVD Recorder+VCR will go into Search mode.2Press [REW] or [FF] to select the desired speed: √√ X2, √√ X4, √√ X8, √√ X16, √√ X32, √√ X64, √(forward) or œ, œœ X2, œœ X4, œœ X8, œœ X16, œœ X32, œœ X64 (backward).Slow MotionPress [SLOW+] or [SLOW–] to enter Slow Motion mode. The default speed is 1/2. When you press [SLOW+] or[SLOW–] repeatedly, the speed will be set to 1/4, 1/8, 1/16, and normal speed. ZoomThe Zoom function allows you to magnify the video image and scroll around the enlarged image.1Press [ZOOM] during Play mode to activate the Zoom function.Each press of the [ZOOM] button changes the Zoom level as follows: X1 (normal size) ➝X2 ➝X3 ➝ X4 ➝X1/2 ➝ X1/3 ➝ X1/4 ➝X1 (normal size)2Use the [œ √…†]buttons to scroll around the zoomed picture.3To resume normal playback, press [ZOOM] repeatedly until the X1 (normal picture) appears.• The Zoom function may not work on some DVDs.• The Zoom function does not work in PAUSE mode.The Camera Angle icon is displayed on the TV screen when alternate angles are available.Changing the Audio LanguagePress [AUDIO] and then press [AUDIO]repeatedly during playback to hear a different audio language or audiotrack.SubtitlesPress [SUBTITLE] and then press [SUBTITLE]repeatedly during playback to select among all available subtitlelanguages.Camera AngleIf a DVD contains scenes recorded at different camera angles, angle icon displays automatically. You can selectamong these angles during playback.Press [ANGLE] and then press itrepeatedly during playback to select the desired angle.The number of the current angle appears on the TV screen.DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지32
PLAYBACK33DVD PlaybackA-BYou can repeat a scene between two points (A and B):1Press [PLAY/PAUSE] play to the start of the desired scene.2Press [A-B] to mark the start point.3Use [FF], [NEXT] to search the end point.4Press [A-B] to mark the end point.5The marked scenes are repeated continuously until you stop the repeat by pressing [A-B] key again.Repeat1To repeat the currently playing chapter, press [REPEAT]. REPEAT CHAPTER appears on the TV screen.2To repeat the currently playing title, press [REPEAT] a second time. REPEAT TITLE appears on the TVscreen.3To repeat the whole disc, press [REPEAT] a third time. REPEAT DISC appears on the TV screen.4You can play in other modes (including Repeat, A-B, Shuffle, or Scan) by pressing [REPEAT] repeatedly.You can repeat a scene that starts when ‘Repeat A-‘ displays on the screen. To mark the end point, press [A-B]. Press[A-B] again to repeat the scene.Search 1Press [SEARCH] to display the Search menu.2Use [œ √]to move to Title (T) or Chapter (C) and use […†] to set the title or chapternumber.Selecting TitlesWhen a disc has more than one title, you can select among all available titles as follows:1Press [DISPLAY] and use […†] to select the Title icon. Press [ENTER] to display a submenu. Use […†] toselect the desired title number and press [ENTER] to confirm.Selecting ChaptersWhen a title on a disc has more than one chapter, you can select among all available chapters as follows:1Press [PREV (§)] or [NEXT (∞)] briefly during playback to select the next or previous chapter.2To skip directly to any chapter during playback, press [DISPLAY]. Use […†] to select the Chapter icon, thenpress [ENTER] to display a submenu. Use […†] to select the desired chapter number and press [ENTER] toconfirm.T/ C31 …†œ √DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지33
34Disc MenusMany DVDs contain Disc menus that allow you to access special features. To open a Disc menu, press [MENU].Then use the [0-9] buttons to directly select the desired options, or use the […†] buttons to highlight yourdesired selection and press [ENTER].1Press [MENU]. The Disc menu is displayed.2To exit the Disc menu, press [STOP] or [TV VIEW].Title Menus1Press [TITLE]. If the current title has a menu, the Title menu will appear on the TV screen. Otherwise, theDisc menu may appear.2The Title menu may contain camera angles, spoken languages and subtitle options, as well as the chaptersfor the title.Digest*****1Press [DIGEST]. The Digest menu is displayed.2To exit the Disc menu, press [STOP] or [TV VIEW].DVD PlaybackDigestTitle DigestChapter DigestTitle IntervalChapter Interval…† Select ■ExitDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지34
PLAYBACK351Press the [VCR] button to set the remote control to operate the VCR deck.2Turn the TV on and select the video input source connected to the DVD Recorder+VCR.Audio system: Turn the audio system on and select the input source connected to the DVDRecorder+VCR.Before You Begin1Insert a prerecorded video cassette.If the DVD Recorder+VCR is powered off, it will power on automatically.Make sure the TIMER indicator on the front panel display is not lit. If it is, press [POWER] once.If a tape without a safety tab is inserted, the DVD Recorder+VCR will start playback automatically.2Press [PLAY].The PLAY icon appears on the TV screen. It is not necessary to select the tape speed (SP, SLP) for playback.It will be automatically selected by the DVD Recorder+VCR.3Press [STOP] to stop playback.The STOP icon appears on the TV screen. If the tape reaches the end before [STOP] is pressed, the DVDRecorder+VCR will automatically stop, rewind, and eject the tape.Playing a VHS TapeAuto TrackingThe automatic tracking function adjusts the picture to remove snow or streaks. It works in the following cases:• When a tape is played for the first time.• When the tape speed (SP, SLP) changes.• When streaks or snow appear because of scratches on the tape.Manual TrackingIf noise appears on the screen during playback, press the [TRACKING +/-] buttons on the remote control untilthe noise on the screen is reduced.• In case of vertical jitter, adjust these controls very carefully.• Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for morethan 3 seconds.Tracking ControlIf the DVD Recorder+VCR is powered on by inserting a video cassette, playback will not start automatically.VCR PlaybackVCR PlaybackVCR SelectedActions are nowfor VCR■StopDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지35
36Notes on special playback featuresHorizontal lines (noise bars) will appear on the TV screen. This is normal.The audio is automatically muted during special playback modes, so there is no sound during search, slow motion, etc.During high-speed picture search, a short time is needed to stabilize tape speed when re-entering Play mode. Slightinterference may be observed during this time.Fast Forward/BackwardThis function lets you visually search forward and backward for a desired scene on your tape.1Press [REW] or [FF] during playback.Search mode will be activated.If the DVD Recorder+VCR is left in Search mode for more than 3 minutes, the DVD Recorder+VCR willautomatically resume Play mode to protect the tape and video heads.2To return to normal playback, press [PLAY].Still Picture1Press [PLAY/PAUSE] during playback.A still picture appears on the TV screen.If a still picture vibrates vertically, stabilize it by using the [TRACKING +/-] buttons on the remote control.If the DVD Recorder+VCR is left in Still mode for more than 5 minutes, the DVD Recorder+VCR willautomatically enter Stop mode to protect the tape and video heads.2To return to normal playback, press [PLAY].Slow Motion1Press [SLOW+] for Slow Motion playback. 2Press [SLOW+] and [SLOW-] repeatedly to adjust the Slow Motion playback speed.Counter Memory FunctionThis is useful if there is a section of tape you want to view immediately after recording or if you want to returnto the same point several times.1Begin recording or playing a tape.2At the point you want to locate later, reset the real-time counter to 0:00:00 by pressing [CLEAR]. Continueto play or record.3Press [STOP] when recording or playback finishes.4You can make the tape automatically stop when the counter returns to about ‘0:00:00‘ by setting thecounter to ‘0:00:00‘ in the ‘Go-To Search‘ function under ‘Setup’ ➝‘Preference’ ➝‘VCR’; see page 26.Special Playback FeaturesVCR PlaybackDF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지36
PLAYBACK37The DVD Recorder+VCR can play audio CDs and MP3 files on CD-ROM, CD-R or CD-RW discs. Other Disc PlaybackOther Disc Playback1Insert the CD disc and close the tray. The Audio CD or MP3 CD menuappears on the TV screen after a few moments to load the disc.2Use […†] to select a track or a file, then press [PLAY] or [ENTER].During playback, the current track's elapsed playing time will appearon the front panel display and menu. Playback will stop at the end ofthe disc.3While playing an Audio CD, use [FF] or [REW] for 2x speed playback. 4Use [PLAY/PAUSE] to pause playback while the disc is playing.5To stop playback at any time, press [STOP].Audio CD/MP3 PLAYBACK• Press [REPEAT] to repeat a track (file) and press again to repeat thewhole disc.• If the disc contains JPEG files as well as MP3 files, you can change thePlay mode to display JPEG image files by pressing [TITLE].On the MP3 CD menu, you can display the folders on the disc. Use […†œ √] to select the folder icon on the MP3 CD menu then press[ENTER] or [PLAY]. You can also display just the tracks in the folders. Use […†œ √] to select a folder then press [ENTER].••• Audio CD •••••• MP3 •••1Insert your CD and close the tray. The JPEG CD or Kodak Picture CDfolder tree appears. 2If there are folders which contain JPEG files (e.g., pictures on a KodakPicture CD), select the desired folder using […†œ √] and press[ENTER].The DVD Recorder+VCR can display JPEG files on CD-R/RW and Kodak Picture CDs.JPEG / Kodak Picture CD PLAYBACKDF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지37
38Other Disc Playback3Select the thumbnail you want to display using […†œ √] and press[ENTER]. 4The full size image will be displayed and a slide show startsautomatically with a time interval of 10 seconds.5Press [NEXT] or [PREV] to manually skip to the next or previous image.6Press [√] (or [œ]) to rotate the image (counter) clockwise.7Press [STOP] to exit the slideshow.• If the disc contains MP3 files as well as JPEG files, you can change thePlay mode to play MP3 files by pressing [TITLE]. • When a CD contains both MP3 files and JPEG files, the default Playmode is JPEG image files.• The DVD Recorder+VCR can playback up to 1000 files per disc.• MP3 files encoded below 64kbps are not supported.You can enjoy a slide show while listening to MP3 music files. 1Prepare a CD which includes both MP3 and JPEG files.2Insert the CD and play an MP3 file. 3Press [TITLE] while playing the MP3 file to change the Play mode. The music playback will not stop.4Select an image file and press [ENTER] to start the slide show.5The MP3 file you selected continues to play during the JPEG slide show.Playing MP3 Files During a Slide ShowDF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지38
PLAYBACK RECORDING39Follow the instructions below to record a TV program.1Turn on the DVD Recorder+VCR and load a recordable disc or tape.Make sure your TV input is set to view the DVD Recorder+VCR.2Set the desired Recording mode by pressing [REC MODE] repeatedly.DVD: HQ (High Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Average Quality - 4 hrs/disc), orSLP (Low Quality - 6 hrs/disc). VCR: SP (Standard Play), SLP (Super Long Play - 3 times SP)3If your DVD Recorder+VCR does not show a TV program, press [TV VIEW] on the remote control. Use [CH …/†] to select the TV channel you wish to record.4Press [AUDIO] to select the audio channel to record (Stereo, SAP, or Mono).The table below shows what audio channel will be recorded with different settings and different types ofbroadcasts.The last column (Monitor Audio) shows what you will hear during recording. For example, if the TVbroadcast is in Stereo, then setting the DVD Recorder+VCR to Stereo will record the broadcast in Stereo,and the Monitor Audio will also be in Stereo.• If you set the audio channel to SAP, but no SAP channel is broadcast, the main audio (Mono or Stereo) willbe recorded.5Press [REC (●)] once.Recording will start. The REC indicator lights on the front panel display.Recording continues until you press [STOP] or the disc is full.To record for a fixed length of time, see One Touch Record on the next page.6Press [STOP (■)] to stop recording.Recording from TVBasic RecordingBasic Recording• The maximum number of DVD titles per disc is 49. If the DVD Recorder+VCR is powered off during DVD recording,the recording will not be saved.• If a DVD+RW or unfinalized DVD+R disc is inserted in the tray, no title is played automatically after loading isfinished. • If you are recording to a blank DVD+R (+RW) disc, it may take up to 7 minutes for post processing after recording. Broadcast Audio MonitorL Ch R Ch AudioMONO MONO MONO MONO MONOSTEREO L R STEREOLeft L L LeftRight L R RightMONO MONO MONO MONOMONO MONO MONO MONOSAP SAP SAP SAPSTEREO L R STEREOSTEREO+SAP SAP SAP SAP SAPMONO MONO MONO MONOTV BroadcastSTEREOMONO+ SAPSelected AudioDF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지39
40Total time and recorded time are displayed on the TV screen after pressing [DISPLAY] twice. Recorded time isdisplayed on the front panel display.Checking the Recording Time1Press [PLAY/PAUSE] to pause the disc or tape during recording.2When you want to continue recording, press [PLAY/PAUSE] or [REC (●)].To Pause the RecordingBasic RecordingNote• To quit One Touch Recording, press and hold [STOP] for 3 seconds.• The DVD Recorder+VCR will automatically power off when One Touch Recording ends.Tip (VCR mode only)• Always use [PLAY/PAUSE] for best results when making changes during recording.For example: To change channels during recording, first press [PLAY/PAUSE] to put the unit in Pause mode. Thenselect the desired channel on the DVD Recorder+VCR, and press [PLAY/PAUSE] again to resume recording.• You cannot record on the VCR deck and DVD deck at the same time. • While the VCR is recording, DVD playback is possible. However, while the DVD is recording, all VCR functions aredisabled.One Touch Recording allows you add recording time in fixed increments at the touch of a button.1Follow steps 1-4 under Recording from TV.2Press [REC (●)] repeatedly to set the length of the recording.Recording starts after the first press. Each subsequent press increases the recording time by 30 minutes(DVD, to a maximum of 6 hours) within the available space or 30 minutes (VCR, to a maximum of 240minutes). The recording time is displayed on the front panel display.One Touch Record (OTR)DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지40
RECORDING41Basic Recording1Insert a Disc.Insert the disc you wish to copy in the DVD deck and close the disc tray.2Insert a VHS Tape.Insert a blank VHS videotape into the VCR deck.3Press [COPY] on the remote control.4Select (DVD ➝VCR) and press [ENTER] or [COPY] to confirm.5Press [REC SPEED] to select the desired Record Mode in ‘Copy to Tape’menu: • SP (Standard Play)• LP (Long Play, 2 times SP).6Press [COPY] again to start copying.7Stop the Copy Process To stop copying at any time, press [STOP]. You must stop the Copy process manuallywhen the DVD movie ends, or the unit may replay and record over and over again.One Touch Copy - DVD to VHS• If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted tocopy Macrovision encoded DVDs. • Copy to VCR does not work in Progressive Scan Mode.If you want to start copy any point of disc1 Find the place on the DVD (or Disc) from which you want to start recording using the[PLAY/PAUSE], [REW] and [FF] functions.2 Press [COPY] while DVD is in pause mode or in resume stop ( »STOP) mode.3 Follow the same procedure 5-7.During one touch copy you can search or change REC SPEED and resume copy.1During One Touch Copy press [PLAY/PAUSE] to enter COPY EDIT mode. 2Search with [FF/REW] or [NEXT/PREV] button.3Press [COPY] and you can change REC SPEED.4Press [COPY] again to resume copy.Copy Edit (DVD ➝VCR) Copy to TapeChoose speed thenpress COPY:LPSP■■ ■StopQuick-Copy MenuPlease Select Quick Record OptionDVD -> VCRVCR -> DVDInstructionsEnter-Confirm Move …†DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지41
42Basic RecordingYou can copy the contents of a VHS tape to a DVD+R or DVD+RW using the [COPY] button. This allows you toarchive your old VHS tapes to DVD.1Insert a VHS Tape.Insert the VHS videotape you wish to copy into the VCR deck.2Insert a DVD+R or DVD+RW disc.Insert a blank DVD+R or DVD+RW disc in the DVD deck and close the disc tray.3Find the place on the VHS tape from which you want to start recording using the [PLAY/PAUSE], [FF] and [REW]functions. And press [STOP].4Press [COPY] on the remote control.5Select (VCR➝DVD) and press [ENTER] or [COPY].6Press [REC SPEED] to select the desired RecordMode in ‘Copy to Disc’ menu: • HQ (High Quality - 1 hr/disc)• SP (Standard Play - 2 hrs/disc)• EP (Extended Play - 4 hrs/disc)• SLP (Super Long Play - 6 hrs/disc)7Press [COPY] again to start copying.8Stop the Copy ProcessTo stop copying at any time, press [STOP].Copying will stop automatically when the VHS tape ends.One Touch Copy - VHS to DVDIf the VHS videotape you are attempting to copy is copy-protected, you will not be able to copy the tape. It is notpermitted to copy Macrovision encoded tapes.When using a DVD+RW disc, you must initialize before copying; see page 46.Copy to DiscChoose quality thenpress COPY:HQSPEPSLPDVD Status■Stop 0 : 00 : 10Copy to DiscUpdating the disc. This may take a fewminutes. Please wait...InstructionsSetup-ExitDuring one touch copy you can search and resume copy.1Press [PLAY/PAUSE] to enter COPY EDIT mode. 2Press [PLAY/PAUSE] again to playback.3Search with [FF/REW] button.4Press [COPY] to resume copy.Copy Edit (VCR ➝ DVD) Quick-Copy MenuPlease Select Quick Record OptionDVD -> VCRVCR -> DVDInstructionsEnter-Confirm Move …†DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지42
RECORDING43The Timer Recording function allows you to record up to 8 programs within a period of one month.1Insert recordable media such as DVD+R ,DVD+RW, recordable VHS tape.2Press [TIMER].or Press [SETUP] and select ‘Timer REC’. Then press [ENTER]. The ‘Timer Recording’ menu appears.Use […†] to move to a timer recording slot, and press [ENTER] to modifyit.If you did not set the clock on the DVD Recorder+VCR, you must do so beforeprogramming a timer recording.3Enter the necessary information for your Timer Recording(s).• Date – Choose a date up to 1 month in advance, or select a daily or weeklyprogram.• Start – Set the recording start time.• End – Set the recording end time.• Input – Choose the desired channel, or one of the external inputs fromwhich to record.• Repeat – Choose frequency of the recording. Once, Daily, Weekly, Weekday.• Media - Choose desired media (DVD or VHS) using […†].• Title - Enter into title edit mode pressing [●].• Mode – Choose a Record mode.DVD: HQ, SP, SLP or EP VCR: SP, SLP[œ √] – Moves the cursor left/right.[…†] – Changes the setting at the current cursor position.Press [SETUP] to exit the Timer Record menu.Press [ENTER] after filling in all the program information.Press [TIMER] to display the Timer Record List.4Press [ENTER] to save the program.The Timer Record List will appear.5Press [SETUP] to exit the Timer Record List.6Timer indicator will light or blinking. Power Off the DVD Recorder+VCR to start the Timer Recording.Timer RecordingTimer RecordingTimer Recording 01/07 08:08:40 AMDate Start Stop Input Media Repeat Mode Result1/1 1:00AM 2:00AM CH2 DVD Once SP OverdusNew InputDelete Edit ExitPrev Page Next Page§■∞ENTER TIMERTimer Recording 01/07 08:08:40 AMInput Digits Confirm and ExitExitTIMER0-9 ENTERDate Start Stop Input Repeat1 / 7 7 : 0 PM 7 : 0 PM CH 2 OnceWedMedia Title ModeDVD TITLE CH2 SP…†Timer Recording 01/07 08:08:40 AMConfirm and Exit Delete EditExit timer recTIMERENTER ■ ●Date Start Stop Input Repeat1 / 7 7 : 0 PM 7 : 0 PM CH 2 OnceWedMedia Title ModeDVD TITLE CH2 SPDVD RecorderInit Setup ➞Timer RECœ √SelectInit Setup Disc Oper Disc Edit Timer RECDF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지43
44Timer RecordingEven if a Timer Recording is set, the DVD Recorder+VCR will not record if:• No disc is loaded.• A non-recordable disc is loaded.• Disc is protected in the ‘Disc Operation’ menu; see page 47.• There are already 49 titles recorded on the disc.You cannot enter a Timer Recording if:• A recording is already under way.• The start time has already passed.• Eight Timer Recordings have already been set.If two or more Timer Recordings overlap:• The earlier program takes priority.• When the earlier program finishes, the later program starts.• If two programs are set to start at exactly the same time, the program entered first takes priority.Confirmation is not possible when:• Disc is protected in the ‘Disc Operation’ menu; see page 47.• There are already 49 titles recorded on the disc.If the disc is damaged, the recording may not complete successfully, even if the Check field shows ‘Rec. OK‘.Timer Recording TroubleshootingYou can clear a Timer Recording any time before the recording actually starts.• Use […†] to select the program you want to erase on the Timer Recorder List. Press [■STOP] to delete theprogram.Canceling a Timer RecordingAfter a Timer Recording has started, you can still cancel the program by pressing and holding [■STOP] for 3seconds.Stopping a Timer Recording in ProgressRecording Priority• Timer Recording and OTR (One Touch Record) have the same priority but they have lower priority than manualrecording. During manual recording Timer Recording or OTR will be ignored.• The Timer indicator lights on the front panel display when the DVD Recorder+VCR is ready for the TimerRecording.• The tape timer indicator is blinking if any of the following meets if no recordable tape is inserted.Both the disc and tape timer indicators are blinking if tape and disc timer recordings are overlapped.• The DVD Recorder+VCR will record the audio according to the current TV tuner setting (Stereo, Mono or SAP). Usethe [AUDIO] button to set the audio before switching the DVD Recorder+VCR to Standby mode.• The DVD Recorder+VCR will automatically power off when the Timer Recording ends.• There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordingsare set to record sequentially (one right after the other), the very beginning of the later program may not berecorded.DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지44
RECORDING45You can record from an external component, such as a camcorder or VCR, connected to any of the DVDRecorder+VCR’s external inputs.1Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages11 and 14.2Use [ …†] to select the external input to record from.• Tuner: Built-in tuner• LINE1 : Audio/Video on front panel• LINE2 : Audio/Video Input on back panel • DV: DV input on front panel.3Load a recordable disc or tape.4Set the desired Recording mode by pressing [REC MODE] repeatedly.DVD: HQ (High Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Average Quality - 4 hrs/disc), orSLP (Low Quality - 6 hrs/disc).VCR: SP (Standard Play), SLP (Super Long Play - 3 times SP)5Press [REC (●)] once.Recording will start. The REC indicator lights on the front panel display.Recording continues until you press [STOP] or the disc is full.To record for a fixed length of time, see ‘One Touch Record‘ on page 39.6Press [STOP (■)] to stop recording.Recording from External ComponentsNoteIf your source is copy-protected, you will not be able to record it using the DVD Recorder+VCR. See ‘Copyright Notice‘on page 4 for more details.Recording from an External InputRecording from an External InputDF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지45
46Recording from an External InputUsing DV, also known as i.LINK, you can connect a DV-equipped camcorder to the DVD Recorder+VCR using asingle DV cable for input and output of audio, video, data and control signals.The i.LINK interface is also known as IEEE 1394-1995.“i.LINK” and the “i.LINK” logo are trademarks.• The DVD Recorder+VCR is only compatible with DV-format (DVC-SD) camcorders. Digital satellite tunersand Digital VHS video recorders are not compatible.• You cannot connect more than one DV camcorder at a time to the DVD Recorder+VCR.• You cannot control the DVD Recorder+VCR from external equipment connected via the DV IN jack (includingtwo DVD Recorders).• It may not always be possible to control the connected camcorder via the DV IN jack.• Audio input to the DV IN jack should be 32 or 48kHz (not 44.1kHz).• Picture disturbance on the recording may occur if the source component pauses playback or plays anunrecorded section of tape, or if the power fails in the source component, or if the DV cable becomesdisconnected.What is DV?You can record from a digital camcorder connected to the DV IN jack on the front panel of the DVDRecorder+VCR.You can use the DVD Recorder+VCR remote to control both the camcorder and the DVD Recorder+VCR. Beforerecording, make sure the digital camcorder is properly connected to the front panel DV IN jack; see page 14. 1Make sure your digital camcorder is connected to the front panel DV IN jack; see page 14.2Press [INPUT] repeatedly to select the DV input.DV appears on the front panel display and the TV screen.3Find the place on the camcorder tape from which you want to start recording. For best results, pause playback at the point you want to start recording. Depending on your camcorder, youcan use the DVD Recorder+VCR remote to control the camcorder using the STOP, PLAY, and PAUSEfunctions.4Press [REC] once to start recording.Recording is automatically stopped if the DVD Recorder+VCR detects no signal. You can pause or stop therecording by pressing [PLAY/PAUSE] or [STOP]. You cannot control the camcorder from the remote controlduring recording.Recording from a Digital CamcoderThe source signal must be DVC SD format.Some camcorders cannot be controlled using the DVD Recorder+VCR remote.If you connect a second DVD recorder using a DV cable, you cannot control the second recorder from this one.You cannot control the DVD Recorder+VCR remotely from a component connected to the DV IN jack.You cannot record date and time information from a DV cassette.DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지46
RECORDING EDITING47For recordable DVD media, such as DVD+R and DVD+RW discs, you can manage the disc using the Disc Menu.The DVD+RW Disc Menu allows you to erase, lock, or unlock your disc. You can also make it compatible withmost other DVD players.At first, go to Disc Operation mode.1Press [SETUP]. The Setup menu appears. 2While ‘Disc Oper‘ is selected, press [ENTER] to go to the DiscOperation page.Erase the disc (DVD+RW)3Use […/†] to select the ‘Erase’ menu.4If you want to erase the whole disc, press [ENTER].5To confirm, select ‘Yes‘. To cancel, select ‘No‘. If you select ‘Yes‘ and press [ENTER], all the contents of the discwill be lost.Protect Disc (DVD+RW)If you want to protect a disc from accidental recording, editing, orerasing, you can lock the disc. Later, if you change your mind, you canunprotect the disc.3Use […/†] to select ‘Protect’ menu.4If you want to protect the whole disc, press [ENTER].5To confirm, select ‘Yes‘. To cancel, select ‘No‘. If you select ‘Yes‘ and press [ENTER], all the contents of the disc will be protected.Disc Operation in DVD+RW discDisc OperationDisc OperationDVD RecorderInit Setup ➞Disc Operationœ √SelectInit Setup Disc Oper Disc Edit Timer RECDisc OperationSelectOKExitENTERDISC…†EraseFinalizeProtectMake CompAdaptDisc Info_ExitErase Erase this disc?OK CancelDisc OperationSelectOKExitENTERDISC…†EraseFinalizeProtectMake CompAdaptDisc Info_ExitProtect Protect this disc?OK Cancel• If you load a blank DVD+R (+RW) disc, it will be initialized (formatted to enable recording).• Do not start recording until disc initialization is complete.• If you load a DVD+RW that has already been used you can record a program immediately. Disc InitializeDF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지47
Make Compatible (DVD+RW)'Make Compatible' for a DVD+RW will automatically create a menuscreen for navigating the disc. This menu screen is accessible bypressing [MENU] or [TITLE].3Press […/†] to select ‘Make Compatible‘.4If you want to make the disc compatible, press [ENTER].5To confirm, select ‘Yes‘. To cancel, select ‘No‘. If you select ‘Yes‘ and press [ENTER], your disc will be make compatible.48Information3Press […/†] to select ‘Disc Info.4The Disc Info Menu shows you disc information, such as disc type,number of recordings, total titles, free space, etc.Disc OperationDisc OperationSelectOKExitENTERDISC…†EraseFinalizeProtectMake CompAdaptDisc Info_ExitLabel Empty 3DVD+RWRecordable (NTSC)154/4414MBHQ : 60 (M)SP : 116 (M)LP : 174 (M)EP : 233 (M)SLP : 349 (M)SEP : 438 (M)Title NO.MediaStatusCloseRemainder• ‘Make Compatible’ can take up to 3-4 minutes depending on the type of disc, how much is recorded on the disc,and the number of titles on the disc.• If you do not make your DVD+RW disc compatible, your edits will not be recognized by other DVD players.Disc OperationSelectOKExitENTERDISC…†EraseFinalizeProtectMake CompAdaptDisc Info_ExitMake CompatibleMake Compatible?OK CancelDF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지48
EDITING49Finalize (DVD+R)Finalizing a DVD+R ‘locks’ its recordings in place so the disc can beplayed on most standard DVD players or computers equipped with DVD-ROM drives.1Use […] to go to the top menu.2Press [√] to display the Disc Information Menu.3Press [√] and select ‘Finalize‘ for a DVD+R.4Press [ENTER] as shown on the screen.5Select 'Yes' using […] and press [ENTER] to finalize the disc.6Press [ENTER] again.7Press [SETUP] to go to the top disc menu. Change Disc Name (Adapt ???)You can rename your disc to any name you choose. The default discname is ‘MY DVD‘.1Use […] to go tothe top menu.2Press [√] to display the Disc Information Menu.3Press [√] and select ‘Change Disc Name‘.4Press [ENTER] as shown on the screen.5The Keyboard Menu appears.6Use [œ √…†]to select and press [ENTER] to enter the name of the disc.CLR : Clear the disc nameSP : SpaceDEL : Delete a characterSAVE : Save the disc name7Press [ENTER] again.8To save the name of the disc, select ‘SAVE‘ and press [ENTER].Disc OperationDisc OperationSelectOKExitENTERDISC…†EraseFinalizeProtectMake CompAdaptDisc Info_ExitFinalize Finalize this disc?OK CancelDisc OperationSelectOKExitENTERDISC…†EraseFinalizeProtectMake CompAdaptDisc Info_ExitAdapt? Adapt this disc?OK CancelFor recordable DVD media, such as DVD+R and DVD+RW discs, you can manage the disc using the Disc Menu.The DVD+R Disc Menu allows you to rename your disc or finalize it so it will be compatible with most otherDVD players. Disc Operation in DVD+R disc• Once you have finalized a DVD+R disc, you cannot edit or record anything else on that disc.• It may take over 7 minutes for finalizing the edited disk, you'd better wait till the set finish the finalizing operation.• ‘Finalize’ can take up to 3-4 minutes depending on the type of disc, how much is recorded on the disc, and thenumber of titles on the disc.DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지49
50Disc EditDisc EditYou can manage the titles on your DVD+R/RW discs using the Titlemenu.At first, go to Disc Edit mode.1Press [SETUP]. The Setup menu appears.2While ‘Disc Edit‘ is selected, press [ENTER] to go to the Disc Editpage.Label a TitleTo change the name of a title:2Select the title to be labelled using [ENTER].3Select ‘Label’ using [… †] .4Press [ENTER] to change the title name.5The Keyboard Menu will be displayed. Use [œ √…†] to select acharacter or function and press [ENTER].6After the new title name is complete, select ‘OK’ and press[ENTER].Erase a Title2Select the title to beerased using [ENTER].3Then select ‘Erase‘ using [… †].4Press [ENTER] to erase the title.5Select 'Yes' and press [ENTER] to confirm.6The Erase Title progress bar will be displayed. This may takesseveral seconds.7After erasing is complete, the erased title remains as an empty title.Title MenuYou can erase titles on DVD+RW discs only.DVD RecorderInit Setup ➞Disc Editœ √SelectInit Setup Disc Oper Disc Edit Timer RECEditTITLE CH 10 10:20 am 12/21/04 SEPSelect ExitConfirm Prev Page Next Page§ENTER ∞SETUPLabelEraseDivideProtectChap EditIndex Pic_ExitTITLE CH 10 10:34 am 12/21/04 HQœ √…†EditTITLE CH 10 10:20 am 12/21/04 SEPSelect ExitConfirm Prev Page Next Page§ENTER ∞SETUPLabelEraseDivideProtectChap EditIndex Pic_ExitTITLE CH 10 10:34 am 12/21/04 HQœ √…†Label TitleInput digits Backspace SelectPrev Page Next Page Delete§■∞œœ0-9ClearOKCancelœ √…†TITLE CH 10a b c d e f g h ij k l m n o p q rSpace s t u v wx y z _ - Backspace‘A’ ‘a’ SymbolEditTITLE CH 10 10:20 am 12/21/04 SEPSelect ExitConfirm Prev Page Next Page§ENTER ∞SETUPLabelEraseDivideProtectChap EditIndex Pic_ExitTITLE CH 10 10:34 am 12/21/04 HQœ √…†Erase Erase the title(s)?OK CancelDF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지50
EDITING51DivideThis feature allows you to divide a title into two titles. 2Select the title to be divided using [ENTER].3Select ‘Divide’ using [… †] .4Press [ENTER] to divide the title.5Select 'Yes' and press [ENTER] to confirm.6Press [ENTER] when the preferred picture is on your TV screen.7It may take a few minutes to divide the title.ProtectIf you want to protect a title from accidental recording, editing, orerasing, you can lock the title. Later, if you change your mind, you canunprotect the title.2Select the title to be protected using [ENTER].3Select ‘Protect’ using [… †] .4Press [ENTER] to protect the title.5Select 'Yes' and press [ENTER] to confirm.6The Protect Title progress bar will be displayed. This may takes several seconds.Protect icon ‘ ’ will appear in front of Title name.Disc EditEditStop ConfirmENTER■EditTITLE CH 10 10:20 am 12/21/04 SEPSelect ExitConfirm Prev Page Next Page§ENTER ∞SETUPLabelEraseDivideProtectChap EditIndex Pic_ExitTITLE CH 10 10:34 am 12/21/04 HQœ √…†EditTITLE CH 10 10:20 am 12/21/04 SEPSelect ExitConfirm Prev Page Next Page§ENTER ∞SETUPLabelEraseDivideProtectChap EditIndex Pic_ExitTITLE CH 10 10:34 am 12/21/04 HQœ √…†EditTITLE CH 10 10:20 am 12/21/04 SEPSelect ExitConfirm Prev Page Next Page§ENTER ∞SETUPLabelEraseDivideProtectChap EditIndex Pic_ExitTITLE CH 10 10:34 am 12/21/04 HQœ √…†Protect Protect the title(s)?OK CancelDividePlease wait....ProtectPlease wait....DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지51
52Edit Chapters2Select the title to be edited using [ENTER].3Select ‘Chap Edit’ using [… †] .4Press [ENTER] to edit the chapters.5Select 'Yes' and press [ENTER] to confirm.6The Chapter Edit Menu will be displayed. Use [œ √…†] to selectone of the various chapter marker functions (Add, Delete, or Hide).7Press [ENTER] to confirm.Add/Delete a MarkerYou can add a chapter marker anywhere in a title during playback.Once the chapter is marked, you can use the chapter search feature asdescribed above.You can add/delete chapter markers or delete all chapter markers in atitle. Hide ChaptersThis feature allows you to hide or unhide a chapter. After hiding achapter, the chapter is not deleted but only hidden. If a chapter ishidden then it shows ‘Unhide Chapter‘ and vice versa.Change Index PictureEach title displayed in the Playlist menu is represented by a thumbnailpicture taken from the start of that title or chapter. If you prefer, youcan select a different still picture from within the title.2Select the title to be edited using [ENTER].3Select ‘Index Pic’ using [… †] .4Press [ENTER] to change the index picture.5Press [ENTER] when the preferred picture is on your TV screen.Disc EditChap Edit1Select ExitConfirm Prev Page Next Page§ENTER ∞SETUPTitlePlayAdd MarkDel MakrHide CH_Exitœ √…†EditTITLE CH 10 10:20 am 12/21/04 SEPSelect ExitConfirm Prev Page Next Page§ENTER ∞SETUPLabelEraseDivideProtectChap EditIndex Pic_ExitTITLE CH 10 10:34 am 12/21/04 HQœ √…†Chap Edit1Select ExitConfirm Prev Page Next Page§ENTER ∞SETUPTitlePlayAdd MarkDel MarkHide CH_Exitœ √…†EditStop ConfirmENTER■EditTITLE CH 10 10:20 am 12/21/04 SEPSelect ExitConfirm Prev Page Next Page§ENTER ∞SETUPLabelEraseDivideProtectChap EditIndex Pic_ExitTITLE CH 10 10:34 am 12/21/04 HQœ √…†DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지52
EDITING REFERENCE53Check the following guide for the possible cause of a problem before contacting customer support.No power.No picture.No sound.Playback picture is poor.DVD Recorder+VCR doesnot start playback.Picture from external inputis distorted.Some channels are skippedover when using [CH…†].Picture or sound ofbroadcasting channel isweak or missing.Camcorder image not shown.The power cord is disconnected.The TV is not set to receive DVDRecorder+VCR signal output.The video cable is not connectedsecurely.The TV power is turned off.The equipment connected with theaudio cable is not set to receiveDVD Recorder+VCR signal output.The audio cables are not connectedsecurely.The power on the equipmentconnected with the audio cable isturned off.The audio cables are damaged.The disc is dirty.Tape heads are dirty.Tape is a rental or was recorded onanother VCR.No disc is inserted.No tape is inserted.An unplayable disc is inserted.The disc is placed upside down.The disc is not placed within theguide.The disc is dirty.The Parental Control level is set.The video signal from the externalcomponent is copy-protected.The skipped channels were deletedwith the CH. Add/Del feature.Antenna or cables are loose.Wrong Tuning Band is selected inthe DVD Recorder+VCR Setup menu.Camcorder is off.Plug the power cord into the wall outletsecurely.Select the appropriate video input on theTV so the picture from the DVDRecorder+VCR appears on the TV screen.Connect the video cable securely.Turn on the TV.Select the correct input mode on theaudio receiver so you can listen to thesound from the DVD Recorder+VCR.Connect the audio cables securely.Turn on the equipment connected withthe audio cable.Replace with new ones.Clean the disc.Clean the video heads.Use [Tracking +/–] for manual trackingadjustment while a tape is playing.Insert a disc or tape. (Check that the discindicator on the front panel display is lit.)Insert a playable disc. (Check the disctype, color system, and regional code.)Place the disc with the playback sidedown.Place the disc on the disc tray correctlyinside the guide.Clean the disc.Cancel the Parental Control function orchange the rating level.You cannot connect via the DVDRecorder+VCR. Connect the componentdirectly to your TV.Use the CH. Add/Del feature to restorechannels. See ‘Add/Remove Channels‘ onpage 18.Tighten connections or replace cable.Try all ‘Tuning Band‘ options; see page17 for details.Turn camcorder on and operate properly.Symptom Cause SolutionTroubleshootingTroubleshootingDF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지53
54TroubleshootingCamcorder image via A/Vinput to DVD Recorder+VCRis not shown on TV screen.Can’t play disc recordedon this DVD Recorder+VCRon another DVD player.Cannot record or did notrecord successfully.Timer Recording notpossible.Stereo Audio Record and/orPlayback not present.Remote control does notwork properly.DVD Recorder+VCR’s source is notset to LINE1/LINE2 composite.The disc was not finalized (or notmade compatible if using aDVD+RW).Some players will not play even afinalized disc.Discs recorded with copy-oncematerial cannot be played on otherplayers.The remaining blank space on thedisc is insufficient.The source you are trying to recordis copy-protected.When setting the recordingchannel, the channel is tuned onyour TV’s tuner.Clock in DVD Recorder+VCR is notset to correct time.Timer has been programmedincorrectly.TIMER indicator light does notappear after programming timer.TV is not Stereo-compatible.Broadcast program is not in stereoformat.DVD Recorder+VCR A/V Out jacksare not connected to TV A/V Injacks.DVD Recorder+VCR Audio/VideoOut is not selected for viewing atthe TV.DVD Recorder+VCR’s TV audiochannel is set to SAP or MONO.The remote control is not pointed atthe remote sensor of the DVDRecorder+VCR.The remote control is too far fromthe DVD Recorder+VCR.There is an obstacle in the path ofthe remote control and the DVDRecorder+VCR.Use INPUT to select AV input channel(LINE1/LINE2 composite).Finalize the disc; see page 47.No solution.No solution.Use another disc.You cannot record the source.Select the channel on the DVDRecorder+VCR’s built-in TV tuner.Set clock to correct time. See ‘Set Clock‘on page 19.Reprogram Timer. See ‘Timer Recording‘on page 42.Reprogram Timer.No solution.No solution.Make A/V connections. Stereo isavailable only via A/V output from DVDRecorder+VCR.Select AUX or A/V source as TV input.Set TV audio channel mode to Stereo. See ‘Changing the TV Audio Channel‘ onpage 29.Point the remote control at the remotesensor of the DVD Recorder+VCR.Operate the remote control within 23 ft(7m).Remove the obstacle.Symptom Cause SolutionDF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지54
REFERENCE55When the DVD Recorder+VCR is moved from a coldplace to a warm place.Under extremely humid conditions.Keep the DVD Recorder+VCR plugged into an ACpower outlet with the power on. This will helpprevent condensation.When condensation has occurred, wait a few hoursfor the DVD Recorder+VCR to dry before using it.Moisture CondensationTroubleshootingMoisture condensation can occur: In locations where moisture condensation may occur:DVD RESET : If the set is in malfunction, press [DVD/VCR] key on the front panel for 4 seconds. As this set is DigitalMultimedia Product, malfunction may occurs.Symptom Cause SolutionThe batteries in the remote controlare dead.The remote control is locked.The DVD Recorder+VCR is in theabnormal status.Replace the batteries.Press and hold POWER key on font over 5seconds.Press and hold [DVD/VCR] key for 5seconds to reset the DVD Recorder+VCR.DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지55
56GeneralPower requirements AC 120V, 60 HzPower consumption Maximum:25W, Power-OFF:3.4WDimensions (approx.) Without Leg : 16.9x3.3x12.3(430x85.5x314)(w x h x d) With Leg : 16.9x3.4x12.3(430x86.5x314)(w x h x d) Mass (approx.) Net : 11.02 lbs (5.00kg) Gross : 14.22 lbs (6.45kg)Operating temperature 41°F to 95°F (5°C to 35°C)Operating humidity 5% to 90%Signal system NTSCRecordingRecording formats DVD Video Recording, DVD-VIDEORecordable discs DVD+R, DVD+RW, DVD-R, DVD-RWRecordable time DVD ; Approx 1 Hour(HQ mode), 2 Hours(SP mode), 3 Hours(LP mode), 4 Hours(EP mode), 6 Hours(SLP mode), 8 Hours(SEP mode)VCR ; SP: 2 Hours(T-120), SLP:6 Hours(T-120)/8 Hours(T-160)Video recording formatSampling frequency 27MHzCompression format MPEG 2Audio recording formatSampling frequency 48kHzCompression format MPEG1 Layer2VCR SpecificationsHead system 4 Head Video, 2 Head Hi-Fi helical scan azimuth systemTimer 12-hour display type with AM, PMTape speed SP: 33.35 mm/sec, SLP: 11.12 mm/secTape width 12.7 mmRewind time less than 2 minutes (T-120)Antenna 75 ohms (VHF/UHF)VHF output signal Channel 3 or 4 (Switchable)Channel coverage VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)Frequency range 20Hz to 20kHzSignal-to-noise ratio 43 dBDynamic range 75 dBChannel separation 45 dBDVD SpecificationsLaser system Semiconductor laser, wavelength 650 nmFrequency response DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHzSignal-to-noise ratio More than 90 dBHarmonic distortion Less than 0.06%Dynamic range More than 90 dBInputsANTENNA IN Antenna or CATV input, 75 ΩVIDEO IN 1.0 Vp-p 75 Ω, sync negative, RCA jack x 2AUDIO IN -8.8 dBm more than 47 k, RCA jack (L, R) x 2DV IN 4 pin (i.LINK/IEEE 1394 standard)Technical SpecificationsTechnical SpecificationsDF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지56
REFERENCE57RCA cable ............................................. RF Coaxial cable ................................... 1 1 Batteries................................................ 1 Blank DVD+RW disc ............................... 1Remote control ....................................... 1 Batteries ................................................. 2Manufactured under license from Dolby Laboratories. ‘Dolby‘, ‘Pro Logic‘ and the double-D symbol aretrademarks of Dolby Laboratories.DTS and DTS Digital Out are registered trademarks of Digital Theater Systems, Inc.AccessoriesOutputsVIDEO OUT 1 Vp-p 75 Ω, sync negative, RCA jack x 1S-VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1(C) 0.286 V (p-p) 75 ΩCOMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1(PROGRESSIVE SCAN) (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2Audio output (digital audio) 0.5 V (p-p), 75 Ω, RCA jack x 1Audio output (analog audio) 1.1 Vrms (1 kHz, -6 dB), 600 Ω, RCA jack (L, R) x 2RF OUT Channel 3 or 4 (Switchable)Design and specifications are subject to change without notice.Technical SpecificationsDF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지57
DEAM (Daewoo Electronics America) warrants each new electronic product manufactured by it to be free fromdefective material and workmanship and agrees to remedy any such defect or to furnish a new part (at theCompany’s option) in exchange for any part of any unit of its manufacture which under normal installation, useand service disclosed such defect, provided the unit is delivered by the owner to us or to our authorizeddistributor from whom purchased or authorized service station intact, for our examination with all transportationcharges prepaid to our factory. To establish and receive warranty service at our factory or authorized servicefacilities, proof of purchase/dated sales invoice is required. Written authorization must be obtained before anymerchandise is returned to the factory.This warranty does not extend to any of our electronic products which have been subjected to misuse, neglect,accident, incorrect wiring not our own, improper installation, unauthorized modification, or used in violation ofinstructions furnished by us, nor units which have been repaired or altered outside of our factory, nor to caseswhere the serial number thereof has been removed, defaced or changed.This warranty is in lieu of all warranties expressed or implied and no representative or person is authorized toassume for us any other liability in connection with the sale of our electronic products.Over-the-counter exchange of initially defective unitsA unit is described as initially defective when the dealer opens the unit and finds that it is inoperative or acustomer opening a new unit finds that it is initially defective. This unit may be returned to the factory by thedealer for exchange. Under no circumstances will a customer be permitted to return an initially defective unitdirectly to the factory.Model Parts LaborDVR-S04/DVR-S05 1 Year 3 monthsThis instrument is listed by Underwriter’s Laboratories, Inc. It isdesigned and manufactured to meet rigid U.L. safety standards againstX-radiation, fire, casualty and electrical hazards.Daewoo Electronics America Inc.120 Chubb Ave,Lyndhurst, NJ 07071 USAFor more information about this or other Daewoo products, call 1-800-DAEWOO8.WarrantyDF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지58

Navigation menu