WINIA Electronics 7NF0016 DVDRW COMBO Recorder User Manual DF Q74D2N LS GB USA

Download:
Mirror Download [FCC.gov]
Document ID	527450
Application ID	OBNBnHjLD2gO3JEH0LUZ9A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	297.77kB (3722162 bits)
Date Submitted	2005-03-29 00:00:00
Date Available	2005-03-29 00:00:00
Creation Date	2005-01-25 06:11:46
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2005-02-28 10:25:44
Document Title	DF-Q74D2N-LS(GB)_USA
Document Creator	QuarkXPress3.3: LaserWriter 8.4.3 KH1-8.4.3
Document Author:	±è¼ºÈñ

DF-Q74D2N-LS(GB)_USA 05.1.25 6:3 AM 페이지A
DVD Recorder + VCR
DF-Q74D2N-JS
User Manual
P/N : 97P95600N0-**
DF-Q74D2N-LS(GB)_USA 05.1.25 6:3 AM 페이지i
Important Safeguards
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
‘dangerous voltage‘ within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and servicing instructions in
the literature accompanying the appliance.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
WARNING:
Do not install this equipment in a confined space such as a bookcase or
similar unit.
NOTE TO CABLE/TV INSTALLER:
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
CLASSE 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
PRODUIT LASER
This reminder is provided to call the cable TV system installer’s attention to
Article 820-40 of the National Electric Code (U.S.A.). The code provides
guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of the cable entry as
practical.
CAUTION:
This DVD Recorder+VCR employs a Laser System. To ensure proper use of this product, please read this
owner’s manual carefully and retain for future reference. Should the DVD Recorder+VCR require maintenance,
contact an authorized service center. Use of controls, adjustments, or the performance of procedures other than
those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do
not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION:
The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as
vases, should be placed on the apparatus.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an unauthorized change or modification is made.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:3 AM 페이지ii
Important Safeguards
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the product is operated in a residential installation. This product generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this product does cause harmful interference to radio or television reception, which can
be determined by turning the product off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC COMPLIANCE:
The responsible party for this product’s compliance is: GoVideo, 7835 East McClain Drive, Scottsdale, AZ
85260, USA.
SERIAL NUMBER:
The serial number is found on the back of the DVD Recorder+VCR. This number is for this unit only. You should
record requested information here and retain this guide as a permanent record of your purchase.
Model No. ___________________________________
Serial No. ___________________________________
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S
MANUAL AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE
REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in
electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the
following procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
Read these instructions.
All these safety and operating instructions
should be read before the product is operated.
Keep these instructions.
The safety, operating and use instructions should
be retained for future reference.
Heed all warnings.
All warnings on the product and in the operating
instructions should be adhered to.
Follow all instructions.
All operating and use instructions should be
followed.
ii
INTRODUCTION
REGULATORY INFORMATION: FCC Part 15
DF-Q74D2N-LS(GB)_USA 05.1.25 6:3 AM 페이지iii
Important Safeguards
Do not use this product near water.
For example: near a bath tub, wash bowl, kitchen
sink, laundry tub, in a wet basement; or near a
swimming pool; and other areas located near
water.
13 Unplug this product during lightning storms or
14
Clean only with dry cloth.
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from overheating.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instructions have been adhered
to.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatuses (including amplifiers) that produce
heat.
9 Make sure that rating of your household
electricity supply matches that shown on the
back of your product.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the product.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
apparatus. When a cart is used,
use caution when moving the
cart/ product combination to avoid injury from
tip-over.
iii
15
16
17
when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as: Power-supply cord
or plug is damaged; liquid has been spilled or
objects have fallen into the product; the product
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Do not connect the product to the power supply
if you have just moved it from a cold environment
to a warm room. This can lead to condensation
inside the product, which can damage it. Wait
for approximately 2 hrs for it to reach room
temperature.
Make sure the product is placed at least 4 inches
(10 cm) apart from other home appliances or
obstacles to ensure sufficient ventilation.
This product is designed to work continuously.
Switching if off does not disconnect if from the
power outlet. To disconnect if from the power
outlet you have to unplug it.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지1
Table of Contents
RECORDING
Important Safeguards _________________________i
Table of Contents ______________________________1
Overview ______________________________________2
Identification of Controls_______________________6
Basic Recording________________________________38
CONNECTIONS
Connecting Antenna/Cable ____________________11
Connecting a TV _______________________________12
Connecting an Amplifier/Receiver _____________13
Connecting Optional Equipment ______________14
Connecting a Digital Camcorder ______________14
SETUP
Initial Installation ______________________________15
Initial Setup____________________________________17
Setup Menu Overview
Menu Navigation
INSTALLATION Settings
RECORDING OPTIONS Settings
LANGUAGE Settings
PREFERENCE / Video Settings
PREFERENCE / Audio Settings
PREFERENCE / Parental Controls
Various PREFERENCE Settings
System Information
Restore Defaults
17
17
17
19
20
21
22
24
26
27
27
Recording from TV
One Touch Record (OTR)
Checking the Recording Time
To Pause the Recording
One Touch Copy - DVD to VHS
Copy Edit (DVD ➝ VCR)
One Touch Copy - VHS to DVD
Copy Edit (VCR ➝ DVD)
38
39
39
39
40
40
41
41
Timer Recording _______________________________42
Recording from an External Input _____________44
EDITING
DISC Initialize __________________________________46
Disc Menu _____________________________________46
Title Menu _____________________________________49
Editing _________________________________________51
REFERENCE
Troubleshooting _______________________________53
Technical Specifications ________________________56
On-Screen Display Overview __________________28
PLAYBACK
DVD Playback _________________________________31
VCR Playback _________________________________34
Other Disc Playback __________________________36
INTRODUCTION
INTRODUCTION
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지2
Overview
DVD, DVD+R, DVD+RW?
What is a DVD?
DVD (Digital Versatile Disc) is a storage medium that combines the convenience of the compact disc with the
latest digital video technology. DVD video uses modern MPEG2 data compression technology that enables an
entire feature film to be stored on a single five inch disc.
How good is the resolution of DVD compared with VHS?
The razor-sharp digital images have more than 500 lines of resolution at 720 pixels per line. This is more than
twice as high as VHS and even better than laser disc quality. DVD picture quality is easily comparable to the
digital masters produced in recording studios.
What is a DVD+RW?
DVD+ReWritable uses ‘phase change‘ media, the same technology on which rewritable CDs are based. A highperformance laser is used to change the reflective properties of the recording layer; this process can be
repeated more than a thousand times.
What is a DVD+R?
Unlike a DVD+RW disc, a DVD+R (write-once DVD) can only be written to once. If it is not finalized after a
recording, further recordings can be added to it. Old recordings can be deleted but they can no longer be
overwritten. The deleted recordings (titles) are marked 'deleted title'.
Before a DVD+R can be played in a DVD player, it must be finalized in the DVD Recorder+VCR. Once this
process is complete, no further recordings can be added.
What can I do with my DVD Recorder+VCR?
Your DVD Recorder+VCR is a machine for recording and playing back digital video discs with ‘two-way‘
compatibility with the universal DVD video standard. This means:
• existing DVD video discs can be played on the recorder.
• recordings made on your DVD Recorder+VCR can be played on other DVD video players and DVD-ROM
drives.
Regional code
ALL
If the region number on your DVD disc does not correspond to the region
number of this player, the disc cannot be played.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지3
Overview
INTRODUCTION
Which discs you can use
The following discs can be used in your DVD Recorder+VCR:
Playback and recording
DVD+RW (Digital Versatile Disc + ReWritable)
DVD+R (Digital Versatile Disc + Write-Once)
Playback only
DVD Video (Digital Versatile Disc)
DVD-R (DVD-Recordable): These discs can only be played back if the recording was made in ‘Video mode‘ and
the recording was finalized.
DVD-RW (DVD-Rerecordable): These discs can only be played back if the recording was made in ‘Video mode‘
and the recording was finalized.
Audio CD (Compact Disc Digital Audio)
CD-R (CD recordable) Audio/ CD-RW (CD rewritable) Audio
Video Format : VCD / DivX / SVCD / MPEG4 / JPEG / Kodak Picture CD
Audio Format : SACD / HDCD / CDDA / MP3 / MP3 Pro / MMA
Not all recordable CDs may be played by your player.
Disc-related Terms
Title (DVD only)
The main film, accompanying feature content, or music album. Each title is assigned a title reference number
enabling you to locate it easily.
Chapter (DVD only)
Sections of a movie or a musical piece that are smaller than titles. A title is composed of one or several
chapters. Each chapter is assigned a number to enable you to easily locate the chapter you want. Depending on
the disc, chapters may not be labeled.
Track (Audio CD only)
Sections of a movie or a musical piece on an audio CD. Each track is assigned a number, enabling you to easily
locate the track you want.
About DVD Recording
Notes on Recording
• The recording times shown are not exact because the DVD Recorder+VCR uses variable bit-rate video
compression. This means that the exact recording time will depend on the material being recorded.
• When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording
times may be shorter.
• Discs recorded at high speeds (equal to or greater than 2X) may not be recognized.
• If you record still pictures or audio only, the recording time may be longer.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지4
Overview
• The displayed times for recording and time remaining may not always add up to the exact length of the
disc.
• The available recording time may decrease if you heavily edit a disc.
• When using a DVD+R disc, you can keep recording until the disc is full, or until you finalize the disc. Before
you start a recording session, check the amount of recording time left on the disc.
Recording TV Audio Channels
The DVD Recorder+VCR can record one or two channel audio. For TV broadcasts, this usually means mono or
stereo, but some programs are broadcast with a main and a SAP (Secondary Audio Program) audio channel.
You can record either the main audio or the SAP audio.
Restrictions on Video Recording
• You cannot record copy-protected video using this DVD Recorder+VCR. Copy-protected video includes DVDVideo discs and some satellite broadcasts. If copy-protected material is encountered during a recording,
recording will pause or stop automatically and an error message will be displayed on-screen.
• Video that is ‘copy-once only’ can only be recorded using DVD+RW discs with CPRM.
Copyright Notice
• Audio and video recordings you make using the DVD Recorder+VCR are for your personal use only. You may
not sell, lend, or rent them to other people.
• This product incorporates copyright protection technology that is protected by method claims of certain
U.S.patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
corporation. Reverse engineering or disassembly is prohibited.
Precautions
Handling the Unit
When shipping the unit
The original shipping carton and packing materials come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.
To keep the surface clean
Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products
in contact with the unit for a long period of time. They will leave marks on the surface.
Cleaning the Unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild
detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage
the surface of the unit.
To obtain a clear picture
The DVD Recorder+VCR is a high-tech, precision device. If the optical pick-up lens and disc drive parts are
dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after
every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your
nearest dealer.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지5
Overview
INTRODUCTION
Remote Control Operation Range
Point the remote control at the remote sensor and press the buttons.
Distance: Within 23 ft (7 m) of the remote sensor.
Angle: Within 30° in each direction of the remote sensor.
Remote Control Battery Installation
Detach the battery cover on the rear of the remote control, and insert two AAA
batteries. Make sure the polarities (+ and -) are aligned correctly.
Caution
Do not mix old and new batteries. Never mix different types of batteries (standard,
alkaline, etc.).
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the disc by the edges
so that fingerprints will not get on the surface. Do not stick paper or
tape on the disc.
Storing Discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct
sunlight, as there may be a considerable temperature increase inside the car.
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and
sound distortion. Before playing, clean the disc with a clean cloth.
Wipe the disc from the center outward.
Do not use strong solvents such as alcohol, benzine, thinner,
commercially available cleaners, or anti-static spray intended for older
vinyl records.
Yes
No
About Symbols
About the
Symbol
‘ ‘ may appear on the TV screen during operation. This icon means the function explained in this User's Guide
is not available on that specific disc.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지6
Identification of Controls
Front Panel
^ *) 2
& (1
! STANDBY/ON
Turns the DVD Recorder+VCR on and off.
Lock/Unlock the front panel and Remote control
by pressing and holding it over 5 seconds.
@ Cassette Compartment (VCR deck)
Insert a video cassette here.
# VCR EJECT
Ejects the tape in the VCR deck.
$ Disc Tray (DVD deck)
Insert a disc here.
% OPEN/CLOSE
Opens or closes the disc tray.
^ REW
DVD: Skips to previous chapter.
VCR: Rewinds the tape during Stop mode. Press
during Play mode for fast reverse picture search.
& DISC MENU
Displays disc menu or title menu of DVD disc.
* PLAY/PAUSE
Starts playback of a disc or tape. Pauses playback
or recording temporarily.
( STOP
Stops playback.
) FF
DVD: Skips to next chapter.
VCR: Advances the tape during Stop mode. Press
during Play mode for fast forward picture search.
45
6 7
1 REC SPEED
Changes Record speed.
2 SELECT DVD/VCR
Toggles control between the DVD deck and the
VCR deck.
Reset the DVD Recorder+VCR by pressing and
holding it for 5 seconds.
3 Front Panel Display
Shows the current status of the DVD
Recorder+VCR.
4 CH+/–
Scans up or down through memorized channels.
Also moves up and down in DVD navigation
menus.
5 REC
Starts recording. Press repeatedly to set the
recording time. Lights red when the DVD
Recorder+VCR is recording.
6 LINE1 (VIDEO, L-AUDIO-R)
Connects to the audio/video output of an external
source (VCR, Camcorder, etc.).
7 DV IN
Connects to the DV output of a digital camcorder,
video deck, or DVD+R/RW recorder.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지7
Identification of Controls
INTRODUCTION
Front Panel Display
Channel
CH23
TV Channel
C123
CATV Channel
Au-1
AV1 input
Au-2
AV2 input
DV
DV input
USB
USB input
DVD to VCR copying
COPY
VCR to DVD copying
Input mode
Copy
COPY
Recording on disc
11:15
Indicates a DVD Timer recording is set.
11:15
Indicates a DVD Timer Recording is in
standby mode.
11:15
Indicates the DVD is recording.
0:30
OTR Recording mode
RECP
Recording Pause mode
Recording on tape
11:15
Indicates a VCR Timer Recording is set.
11:15
Indicates a VCR Timer Recording is in
standby mode.
11:15
Indicates the VCR is recording.
0:30
OTR Recording mode
RECP
Recording Pause mode
Others
SAFE
Indicates when the DVD Recorder+VCR is locked.
VCR
Indicates the DVD Recorder+VCR is in
VCR mode (set by [TV/VCR] button).
TV
Indicates the DVD Recorder+VCR is in
TV mode (set by [TV/VCR] button).
I-S
Indicates when the DVD Recorder+
VCR is outputting the video signal in
Interlaced Scan mode.
P-S
Indicates when the DVD Recorder+ VCR
is outputting the video signal in
Progressive Scan mode.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지8
Identification of Controls
Remote Control
Turns the DVD Recorder+VCR on and off.
- Opens and closes the disc tray in DVD mode.
- Ejects the tape in the VCR deck in VCR mode.
Selects DVD mode.
Selects VCR mode.
Switches between the DVD Recorder+VCR tuner and your TV tuner.
Switches the DVD Recorder+VCR input to TV tuner, Line 1, Line 2, or DV.
- Selects numbered options in menus.
- Selects TV channels.
- Manually adjusts tracking.
Resets the tape counter in VCR mode.
Accesses DVD disc menus.
Displays or exits the Setup menu.
Starts DVD playback automatically without searching DVD menu when you
load a DVD disc.
Displays information about the currently loaded disc, VHS tape, or TV
channel.
- œ √…† : Selects menu options.
- CH(+/–) : Selects channels.
Confirms menu selections.
Increases or decreases the slow motion speed when playing a DVD or VHS
tape.
Skips to the next or previous chapter/track.
- DVD: Searches backward/forward.
- VCR: Rewinds/advances during Stop mode. Press during Play mode for
fast reverse/forward picture search.
Starts recording. Press repeatedly to set the recording time. For more
details, Refer to One Touch Record (OTR) on page 39.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지9
Identification of Controls
Stops playback or recording.
Displays the Timer Recording menu.
Selects Recording mode: - DVD : HQ (1hr), SP (2hrs), EP (4hrs) or SLP (6hrs).
- VCR : SP or SLP.
Displays a disc’s Title menu, if available.
Displays the edit menu for DVD+RW/+R discs or sets a chapter marker.
Displays the disc operation for DVD+RW/+R discs.
Displays the digest menu for DVD+RW/+R discs.
Repeats the current chapter, track, title or the entire disc.
Repeats playback between two points (A and B).
Enlarges the DVD video image.
Selects an audio language (DVD), audio channel (CD) or audio type (TV).
Selects a subtitle language, if available.
Selects a DVD camera angle, if available.
Progressive Scan Mode
If your TV supports Progressive Scan, you can view high quality video by setting the DVD
Recorder+VCR to Progressive Scan mode. If your TV does not support Progressive Scan,
do NOT change to Progressive Scan mode.
If you do so accidentally, press and hold the [P.SCAN] key for 3 seconds to restore
normal viewing.
INTRODUCTION
- Starts playback.
- Pauses playback or recording temporarily. Press again to exit Pause mode.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지10
Identification of Controls
Rear panel
@#
$%
DVD & VCR OUT
OUT
AUDIO OUT COMPONENT OUT
Pr
ANT. IN
LINE 2
AUDIO
S-VIDEO
OUT
Pb
COAXIAL
DIGITAL
AUDIO OUT
( *
! AC Power Cord
Plug into a power outlet.
@ AUDIO OUT (L, R)
Connect to a TV or other equipment with audio
inputs.
# COMPONENT/PROGRESSIVE VIDEO OUT (Y Pb Pr)
Connect to a TV with Component Video (Y Pb Pr)
inputs.
$ AV OUT (VIDEO, L-AUDIO-R)
Connect to a TV with video and audio inputs.
% LINE2 (VIDEO, L-AUDIO-R)
Connect to the audio/video outputs of an external
source (VCR, Camcorder, etc.).
VIDEO
RF OUT
^ RF IN (FROM ANT.)
Connect to your antenna or cable TV outlet.
& RF OUT (TO TV)
Connect to a TV with an RF coaxial input.
* COAXIAL (Digital Audio Out)
Connect to an amplifier with a coaxial digital
audio input.
( S-VIDEO OUT
Connect to a TV with an S-Video Input.
Caution
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to
the DVD Recorder+VCR.
10
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지11
Connections
• Make sure the DVD Recorder+VCR is connected directly to the TV, and the TV is set to the correct video input.
• Do not connect the DVD Recorder+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.
• Do not connect the DVD Recorder+VCR via your VCR. The DVD image could be distorted by the copy protection
system.
Connecting Antenna/Cable
Disconnect the antenna/cable from the rear of your
TV.
Connect this cable to the jack marked RF IN (FROM
ANT.) on the rear panel of the DVD Recorder+VCR.
Antenna
Antenna
Cable TV
Wall Jack
Flat Wire
(300 ohm)
300/75 ohm
Adaptor
(Not supplied)
OR
OR
DVD & VCR OUT
OUT
AUDIO OUT COMPONENT OUT
Pr
ANT. IN
LINE 2
AUDIO
DEO
Pb
COAXIAL
DIGITAL
AUDIO OUT
Cable Service Without Cable Box
VIDEO
RF OUT
Rear of DVD Recorder+VCR
If your cable wire is connected to your TV without a
converter or descrambler box, unscrew the wire from your TV and attach it to the RF IN (FROM ANT.) jack on the
rear panel of the DVD Recorder+VCR.
Use the supplied coaxial cable to connect between the DVD Recorder+VCR’s OUT (TO TV) jack and the antenna
input jack on your TV. With this connection, you can receive all midband, superband, and hyperband channels
(all cable channels).
Cable Service With Cable Box
Cable TV
Wall Jack
If a cable box is required in your cable system, follow
the instructions shown at right. This hookup permits
both TV and DVD Recorder+VCR operation.
Back Panel of
Typical Cable Box
To view or record a CATV channel:
Tune the TV to the correct video input channel.
Set the DVD Recorder+VCR to the output channel of
the cable box using the [CH …/†] or the [0-9] keys
on your DVD Recorder+VCR (e.g., CH3).
Select the channel you wish to view on the cable
box.
DVD & VCR OUT
OUT
AUDIO OUT COMPONENT OUT
Pr
ANT. IN
LINE 2
AUDIO
EO
Pb
COAXIAL
DIGITAL
AUDIO OUT
VIDEO
RF OUT
Rear of DVD Recorder+VCR
If you are using a cable box to tune channels, it is not necessary to run Auto Channel Search as indicated on page 18.
11
CONNECTIONS
Caution
INTRODUCTION
• There are a variety of ways to connect the DVD Recorder+VCR to your TV and other equipment. Use only one of
the connections described below. Whichever TV connection you use will work with all input sources.
• Please refer to the manuals for your TV, VCR, stereo system, or other devices as necessary to make the best
connections.
• For better sound reproduction, connect the DVD Recorder+VCR’s AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo, or audio/video equipment. See ‘Connecting an Amplifier/Receiver‘ on page 13.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지12
Connections
Connecting a TV
Choose one of the following TV connections, depending on the capabilities of your equipment.
All video signals are available from all video outputs. That means that whichever TV connection you use, it will
work with all input sources, including VHS out of the Component/Progressive Video Output.
RF Coaxial Connection
Connect the RF OUT (TO TV) jack on the DVD
Recorder+VCR to the antenna in jack on your TV using
the supplied coaxial cable (R). If you use this
connection, tune your TV to the DVD Recorder+VCR’s
RF output channel (CH 3 or 4).
Rear of TV
S-VIDEO
INPUT
VIDEO
INPUT
COMPONENT/PROGRESSIVE VIDEO INPUT
Pr
Pb
ANTENNA
INPUT
AUDIO INPUT
How to set the DVD Recorder+VCR’s RF output channel
Press [SETUP] and select Installation ➝ Modulator
Out to change the RF out channel. For details refer to
page 18.
DVD & VCR OUT
Audio/Video Connection
1 Connect the VIDEO OUT jack on the DVD
OUT
AUDIO OUT COMPONENT OUT
Pr
ANT. IN
LINE 2
AUDIO
S-VIDEO
OUT
Pb
COAXIAL
DIGITAL
AUDIO OUT
VIDEO
Recorder+VCR to the video in jack on your TV
using the supplied video cable (V).
Rear of DVD Recorder+VCR
Connect the Left and Right AUDIO OUT jacks
from the DVD Recorder+VCR to the left/right audio in jacks on your TV using the supplied audio cables (A).
RF OUT
S-Video Connection
1 Connect the S-VIDEO OUT jack on the DVD Recorder+VCR to the S-Video in jack on your TV using an S2
Video cable (S).
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on
your TV using the supplied audio cables (A).
Component Video Connection
1 Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding
input jacks on your TV using a Y Pb Pr cable (C) if the Component Video jacks (Y, Pb, Pr) are available on
your TV.
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on
your TV using the supplied audio cables (A).
Progressive Scan Connection
• If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the DVD
Recorder+VCR’s Progressive Scan output for the highest video resolution possible.
• If your TV does not accept the Progressive Scan format, the picture will appear scrambled.
Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding
in jacks on your TV using an optional Y Pb Pr cable (C).
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on
your TV using the supplied audio cables (A).
• Be sure to set the DVD Recorder+VCR to Progressive Scan mode by pressing and holding [P.SCAN] for 3 seconds
(or changing the Scan Mode in the Setup Menu; see page 21).
• Progressive Scan does not work with the RF, Audio/Video or S-Video connections.
12
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지13
Connections
Connecting an Amplifier/Receiver
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro Logic
Connect the Left and Right AUDIO OUT jacks on the DVD Recorder+VCR to the left and right audio in jacks on
your amplifier, receiver, or stereo system, using the supplied audio cables (A).
Connect the DVD Recorder+VCR’s DIGITAL AUDIO OUT jack (COAXIAL X) to the corresponding in jack on
your amplifier. Use an optional digital coaxial audio cable.
You will need to activate the DVD Recorder+VCR’s digital output; see ‘AUDIO Settings‘ on page 22.
Digital Multi-Channel Sound?
A digital multi-channel connection provides the best sound quality. For this you need a multi-channel
audio/video receiver that supports one or more of the audio formats supported by your DVD Recorder+VCR
(MPEG 2, Dolby Digital, and DTS). Check the receiver manual and the logos on the front of the receiver.
• Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is
selected.
• If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce
a strong, distorted sound or no sound at all.
• 5.1 channel digital surround sound via the digital connection can only be obtained if your receiver is equipped with
a digital multi-channel decoder.
• To see the audio format of the current DVD on the on-screen display, press [AUDIO].
The DVD Recorder+VCR does not perform internal (2- channel) decoding of DTS sound tracks. To enjoy DTS multichannel surround, you must connect the DVD Recorder+VCR to a DTS compatible receiver via one of the DVD
Recorder+VCR’s digital audio outputs.
Rear of DVD Recorder+VCR
DVD & VCR OUT
OUT
AUDIO OUT COMPONENT OUT
Pr
Pb
ANT. IN
LINE 2
AUDIO
S-VIDEO
OUT
COAXIAL
DIGITAL
AUDIO OUT
VIDEO
RF OUT
AUDIO INPUT
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
13
CONNECTIONS
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped
with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지14
Connections
Connecting Optional Equipment
To receive audio/video signals from other equipment,
connect the LINE1 or LINE2 jacks on the DVD
Recorder+VCR to the audio/video out jacks on your
external component, using optional audio/video cables.
OUT
ANT. IN
LINE 2
AUDIO
VIDEO
RF OUT
Connecting a Digital Camcorder
Using the front panel DV IN jack, it is possible to connect a DV digital camcorder, video deck or DVD+R/RW
recorder and digitally transfer DV tapes or DVD+R/RW discs to DVD+R/RW.
Use a DV cable (not supplied) to connect the DV In/Out jack of your DV camcorder/video deck to the front panel
DV IN jack of the DVD Recorder+VCR.
This jack is for connection to DV equipment only. It is not
compatible with digital satellite tuners or D-VHS video
decks.
DV Digital Camcorder
DV
IN/OUT
DV IN
Front of DVD Recorder+VCR
14
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지15
Initial Installation
Initial Installation
After successfully connecting your DVD Recorder+VCR to your TV and other
devices, this chapter will show you how to complete the initial installation.
You must follow the initial installation process to set the time, date, channels,
and language preferences for the DVD Recorder+VCR.
A ‘Welcome‘ message is displayed on the screen. Make sure the RF cable
from your antenna or cable TV jack is connected.
Installation
Welcome.
Press [Enter] to begin auto channel search.
CONNECTIONS
Ensure antenna is connected.
SETUP
Instructions
Setup-Exit
Select the desired language for the on-screen menu using […/†]. Press
[ENTER] to confirm.
Installation
Please select your language to begin auto
install procedure:
English
Spanish
French
Instructions
Enter-Confirm Setup-Exit Move …†
Select the desired disc menu language using […/†]. Press [ENTER] to
confirm.
Installation
Please select disc menu language:
Default
English
Spanish
French
Italian
Japanese
Chinese
Instructions
Enter-Confirm Setup-Exit Move …†
Select the desired disc playback audio language using […/†]. Press
[ENTER] to confirm.
Installation
Please select disc play back audio
language:
Default
English
Spanish
French
Italian
Japanese
Chinese
Instructions
Enter-Confirm Setup-Exit Move …†
15
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지16
Initial Installation
Select the desired disc playback subtitle language using […/†]. Press
[ENTER] to confirm.
Installation
Please select disc play back subtitle
language:
Default
English
Spanish
French
Italian
Japanese
Chinese
Off
Instructions
Enter-Confirm Setup-Exit Move …†
Select the desired signal type using […/†]. Press [ENTER] to confirm.
Installation
What type of signal are you using?
Cable TV
Antenna
Detect Automatically
Instructions
Enter-Confirm Setup-Exit Move …†
The DVD Recorder+VCR detects channels automatically and stores them
in memory.
Installation
Searching for available TV stations:
2 channels found
Please wait...
Instructions
Setup-Exit
10
After finishing Auto Channel Search, set the clock.
Use [œ/√] to move left/right and use […/†] to change the settings.
After setting the clock, press [ENTER] to confirm. If you cancel the process
during Initial Installation, you should repeat this procedure.
Set Clock
Please set the clock:
…
Time : 12 : 00 AM
†
Date : Jan / 01 / 2005 (SAT)
Instructions
Enter-Confirm Setup-Exit Move …†
16
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지17
Initial Setup
Setup Menu Overview
The DVD Recorder+VCR Setup menu includes four categories, including: Initial Setup, Disc Operation, Disc Edit
and Timer Recording. Press [SETUP], [œ/√] and [ENTER] on the remote control to view the first and second
levels of the Setup menu.
1. Initial Setup Screen
2. Disc Operation Screen
go to page 17~27.
go to page 47~49.
DVD Recorder
Init Setup ➞
DVD Recorder
Init Setup ➞
Init Setup
œ √ Select
Disc Operation
œ √ Select
Init Setup
Disc Oper
Disc Edit
Timer REC
Init Setup
Disc Edit
Timer REC
go to page 42~43.
DVD Recorder
Init Setup ➞
DVD Recorder
Init Setup ➞
Disc Edit
œ √ Select
Timer REC
œ √ Select
Disc Oper
Timer REC
4. Timer Recording Screen
go to page 50~52.
Init Setup
Disc Edit
SETUP
3. Disc Edit Screen
Disc Oper
Disc Edit
Timer REC
Init Setup
Disc Oper
INSTALLATION Settings
Tuning Band
1 Press [SETUP]. The Setup menu appears.
While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup
page.
Use [œ/√] to select ‘Installation Page
Press [√] to move to the second level.
While ‘Installation Page
‘TV/CATV‘.
‘.
‘ is selected, press [†] to select
- - Installation Page - •TV/CATV
Auto Scan
CH Add/Del
Modulator Out
Clock Setting
…
œ√†
Choose
TV
• CATV
ENTER
OK
SETUP
Exit
Use […/†] to select TV or CATV, then press [ENTER].
TV: If you are using a standard antenna to receive channels.
CATV: If you are using basic cable to receive channels.
If you are receiving channels from a cable box or satellite receiver connected to the LINE1 or LINE2 inputs, there is no
need to set Tuning Band or search for channels. Set the DVD Recorder+VCR to its LINE1 or LINE 2 input and select the
desired channel on your cable box or satellite receiver.
17
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지18
Initial Setup
Auto Channel Search
The DVD Recorder+VCR has a frequency synthesized tuner capable of
receiving up to 181 channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Preparation:
Connect the DVD Recorder+VCR to the desired type of antenna or cable TV
system, as shown in ‘Connecting Antenna/Cable‘ on page 11.
- - Installation Page - TV/CATV
•Auto Scan
CH Add/Del
Modulator Out
Clock Setting
…
œ√†
Choose
ENTER
Follow steps 1-2 as shown under Tuning Band.
While ‘Installation Page
OK
SETUP
Exit
Auto Scan
CATV
113/125
‘ is selected, press […/†] to select ‘Auto Scan‘.
Cancel
Please wait...
Press [ENTER] to begin the channel search.
The tuner will automatically search for all available channels in your area and place them in the tuner’s
memory.
After Auto Channel Search is complete, follow the instructions above to make sure that Tuning Band is set correctly
(TV or CATV).
Add/Remove Channels
This feature allows you to manually add or delete channels from your
channel list.
Follow steps 1-2 as shown under Tuning Band.
Use […/†] to select ‘CH Add/Del‘.
- - Installation Page - TV/CATV
Auto Scan
•CH Add/Del
Modulator Out
Clock Setting
Press [ENTER]. The Channel Add/Delete menu appears.
…
œ√†
Choose
ENTER
Use [CH+/-] or [0-9] to select a channel then toggle the add/delete
selection by pressing [œ/√].
OK
CH Add/Del
œ
SETUP
Delete
Confirm
Press [SETUP] to exit the Channel Add/Delete menu.
CH + –
0-9
ENTER
Exit
√
Exit
CH Select
OK
Modulator Out
This feature allows you to set the RF Output channel to your TV (you only
need to set this if you are using the RF Out connection to your TV).
18
Follow steps 1-2 as shown under Tuning Band.
Use […/†] to select ‘Modulator Out‘.
- - Installation Page - TV/CATV
Auto Scan
CH Add/Del
•Modulator Out
Clock Setting
• CH3
CH4
Press [√] to move to the second level.
…
œ√†
Use […/†] to set the Modulator Out channel to ‘CH3’ or ‘CH4’.
Press [ENTER] to confirm.
Choose
ENTER
OK
SETUP
Exit
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지19
Initial Setup
Set Clock
1 Follow steps 1-2 as shown under Tuning Band.
2 Use […/†] to select ‘Set Clock‘.
3 Press [ENTER]. The Set Clock menu appears.
4 Enter the date and time.
- - Installation Page - TV/CATV
Auto Scan
CH Add/Del
Modulator Out
•Clock Setting
œ /√ (left/right): Moves the cursor to the previous or next column.
…
œ√†
Choose
…/† (up/down): Changes the setting at the current cursor position.
Press [ENTER] to confirm your setting, then press [SETUP] to exit the Setup menu.
ENTER
OK
Clock Setting
…
2005 1 1
†
SETUP
Exit
42 AM
SETUP
RECORDING OPTIONS Settings
DVD Record Quality
You can set the default DVD recording quality to: HQ (High Quality - 1
hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Average Quality - 4 hrs/disc),
or SLP (Low Quality - 6 hrs/disc).
Press [SETUP]. The Setup menu appears.
While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup
page.
- - Record Options Page - •DVD Quality
Chapter Mark
VCR Quality
Use [œ/√] to select ‘Record Options Page
While ‘Record Options Page
…
œ√†
Choose
• HQ
SP
LP
EP
SLP
SEP
ENTER
OK
SETUP
Exit
OK
SETUP
Exit
‘.
‘ is selected, press [†] to select ‘DVD Quality‘.
Press [√] to move to the second level.
Use […/†] to to select the desired Record Quality (HQ, SP, LP, EP, SLP or SEP).
Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.
Auto Chapter
During recording, chapter markers are added automatically at fixed
intervals.
You can set this interval to 5 Min, 10 Min or 15 Min.
To turn off automatic chapter marking, select ‘Off ‘.
Follow the same procedure as the DVD Record Quality.
- - Record Options Page - DVD Quality
•Chapter Mark
VCR Quality
…
œ√†
Choose
Off
• 5Min
10Min
15Min
ENTER
19
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지20
Initial Setup
VCR Record Quality
You can set the default VCR recording quality to SP (Standard Play) or SLP
(Super Long Play).
SP is higher quality, but SLP provides 3 times the recording time; e.g., a 2
hour tape will record for 6 hours in SLP mode.
Follow the same procedure as the DVD Record Quality.
- - Record Options Page - DVD Quality
Chapter Mark
•VCR Quality
…
œ√†
SLP
•SP
Choose
ENTER
OK
SETUP
Exit
SETUP
Exit
SETUP
Exit
SETUP
Exit
SETUP
Exit
LANGUAGE Settings
OSD Language
Select a language for the DVD Recorder+VCR Setup menu and on-screen
displays.
- - Languages Page - •OSD Lang
Menu Lang
Subtitle Lang
Audio Lang
Press [SETUP]. The Setup menu appears.
• English
Français
Espanol
While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup
page.
Use [œ] and [√] to select ‘Languages Page
‘.
…
œ√†
Choose
ENTER
OK
While ‘Language‘ is selected, press [†] to select ‘OSD Lang‘.
Press [√] to move to the second level.
Use […/†] to select the desired language.
Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.
Menu/Subtitle/Audio Language
Select your preferred language for Disc Menus, Subtitles, and Audio
soundtracks.
Default : The disc’s default language is selected.
- - Languages Page - OSD Lang
•Menu Lang
Subtitle Lang
Audio Lang
Follow the same procedure as the OSD Language.
…
œ√†
• Default
English
French
Spanish
Italian
Japanese
Chinese
Choose
ENTER
OK
- - Languages Page - OSD Lang
Menu Lang
•Subtitle Lang
Audio Lang
…
œ√†
• Off
English
French
Spanish
Italian
Japanese
Chinese
Choose
ENTER
OK
- - Languages Page - OSD Lang
Menu Lang
Subtitle Lang
•Audio Lang
…
œ√†
20
Choose
• Default
English
French
Spanish
Italian
Japanese
Chinese
ENTER
OK
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지21
Initial Setup
PREFERENCE / Video Settings
Press [SETUP]. The Setup menu appears.
- - Preference Page - -
While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup
page.
Use [œ/√] to select ‘Preference Page
While ‘Preference Page
‘.
‘ is selected, press [†] to select ‘Video‘.
Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
• TV Aspect
Scan Mode
Choose
ENTER
OK
4:3 PS
Interlace
SETUP
Exit
Press [√]. The ‘Video‘ submenu is displayed.
TV Aspect Ratio
1 Use […/†] to select ‘TV Aspect‘ while the ‘Video‘ submenu is
Press [√] to go to the second level.
Use […/†] to select the desired TV Aspect.
Press [ENTER] to confirm your selection.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
Choose
TV Aspect
Scan Mode
ENTER
OK
SETUP
displayed.
• 4:3 LB
4:3 PS
16:9
Auto
SETUP
Exit
Press [SETUP] to exit the menu.
4:3 LB : Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and
below the picture.
4:3 PS : Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both
sides of the picture are cut off.
16:9 : Select when a 16:9 wide screen TV is connected.
Auto : Convert to the appropriate aspect ratio automatically.
Scan Mode
Progressive Scan Video provides the highest picture quality with reduced
flickering.
• If you are using the COMPONENT/PROGRESSIVE VIDEO OUT jacks, but
are connecting the DVD Recorder+VCR to a standard (analog)
television, set Scan Mode to Interlace.
• If you are using the COMPONENT/PROGRESSIVE VIDEO OUT jacks for
connection to a TV or monitor that is compatible with a Progressive
Scan signal, set Scan Mode to Progressive.
Follow the same procedure as TV Aspect Ratio to change the Scan Mode.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
Choose
TV Aspect
Scan Mode
ENTER
OK
• Interlace
Progressive
SETUP
Exit
Caution
Once the Progressive Scan setting is entered, an image will only be visible on a Progressive Scan compatible TV or
monitor. Press and hold [P.SCAN] for 3 seconds to return to Interlace Scan mode.
21
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지22
Initial Setup
PREFERENCE / Audio Settings
Follow the same procedure as Video Settings to select Audio Settings.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
• Digital Output
Dynamic
V SURR
VCR Reception
Tape Playback
Choose
ENTER
OK
Bitstream
Off
Off
SAP
Hi-Fi
SETUP
Exit
Digital Output
1 Use […/†] to select ‘Digital Output‘ while the Audio submenu is
displayed.
Press [√] to go to the second level.
Use […/†] to select the desired digital output type.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
Digital Output
Dynamic
V SURR
VCR Reception
Tape Playback
• Bitstream
LPCM
Off
Press [ENTER] to confirm your selection.
…
œ√†
Choose
ENTER
OK
SETUP
Exit
Press [SETUP] to exit the menu.
Off
No signal will be output from the Digital Audio Out jacks.
LPCM
Select when connected to a 2 channel digital stereo amplifier. The DVD Recorder+VCR's digital audio signal will
be output in the PCM 2ch format when you play a DVD (or VHS tape) recorded with a Dolby Digital (only for
DVD) or MPEG soundtrack. If the DVD is recorded with a DTS sound track then no sound will be heard.
Bitstream
Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby
Digital or DTS decoder).
Dynamic Range
While watching DVD movies, you may wish to compress the dynamic range
of the audio output (the difference between the loudest and quietest
passages). This allows you to listen to a movie at a lower volume without
losing clarity of sound.
Set ‘Dynamic‘ to Low or High for this effect.
Follow the same procedure as ‘Digital Output‘ to set the Dynamic Range.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
Choose
Digital Output
Dynamic
V SURR
VCR Reception
Tape Playback
ENTER
OK
• Off
Low
High
SETUP
Exit
Virtual Surround
You can enjoy a simulated 3D effect from two speakers by setting ‘V SURR
(Virtual Surround)’ to On.
Follow the same procedure as ‘Digital Output‘ to set the Virtual Surround
option.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
22
Choose
Digital Output
Dynamic
V SURR
VCR Reception
Tape Playback
ENTER
OK
• Off
On
SETUP
Exit
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지23
Initial Setup
VCR Reception
Select your desired audio source for VCR recording (Stereo, Mono, or SAP).
Follow the same procedure as ‘Digital Output‘ to set the VCR Reception
option.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
Choose
Digital Output
Dynamic
V SURR
VCR Reception
Tape Playback
ENTER
OK
• Stereo
Mono
SAP
SETUP
Exit
Tape Play Back
Select your desired audio signal for VHS tape playback (Hi-Fi or Linear).
Follow the same procedure as ‘Digital Output‘ to change the Tape Play Back
option.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
Choose
ENTER
OK
• Hi-Fi
Linear
SETUP
SETUP
…
œ√†
Digital Output
Dynamic
V SURR
VCR Reception
Tape Playback
Exit
23
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지24
Initial Setup
PREFERENCE / Parental Controls
Set Parental Level
The Parental Controls feature allows you to prevent DVDs from being played based on their ratings or to have
certain discs played with alternative scenes. You can set the parental level from 1 to 8.
Press [SETUP]. The Setup menu appears.
While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page.
Use [œ/√] to select ‘Preference Page
‘.
- - Preference Page - -
While ‘Preference Page
Ctrl‘.
‘ is selected, press [†] to select ‘Parental
Video
Audio
•Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
Press [√] to select ‘Parental‘. Then press [√] again to change parental
level.
Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
Use […/†] to select the desired parental level and press [ENTER] to
confirm.
Off : If you select Unlock, the Lock feature is not active. All discs will
play in full.
Level 1 to 8: Some discs contain scenes not suitable for children. If you
Choose
ENTER
OK
8 ADULT
SETUP
Exit
- - Preference Page - -
œ√†
Parental
Password
• Parental
Password
Choose
ENTER
OK
8 ADULT
SETUP
Exit
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
Parental
Password
Off
1 KID SAFE
2G
3 PG
4 PG 13
5 PGR
6R
•7 NC 17
8 ADULT
set a rating for the DVD Recorder+VCR, all scenes with the same rating
Choose
OK
Exit
or lower will be played. Higher rated scenes will not be played unless
an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If
no suitable alternative is found, playback will stop. You must enter the 4-digit password or change the
rating level in order to play the disc.
…
ENTER
œ√†
The Password Input dialog will appear. Enter a 4-digit password using the 0-9
buttons. If this is the first time you have entered a password, you will be prompted to
enter the password again to confirm it.
Input Password
Old Password
0-9
…
œ√†
The initial password is ‘0000‘. You must enter this password before you can
change the Parental Level.
After setting the password, press [ENTER] while 'Set Parental Level' is
displayed.
Press [ENTER] to confirm your rating selection, then press [SETUP] to
exit the menu.
OK
Input digits
Select
Cancel
ENTER
OK
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
24
SETUP
Choose
• Parental
Password
ENTER
OK
7 NC 17
SETUP
Exit
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지25
Initial Setup
Change Password
1 While ‘Preference Page
‘ is selected, press [†] to select ‘Parental
Ctrl‘.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
Parental
• Password
Choose
ENTER
Change
OK
SETUP
Exit
Select ‘Password‘ then press [√] to select ‘Change‘.
- - Preference Page - -
…
œ√†
Choose
Press [ENTER]. The Input Password submenu appears. Enter your current 4-digit
password then press [ENTER].
Enter a new 4-digit password, then press [ENTER]. Re-enter the new password to
confirm, press [ENTER].
Parental
Password
ENTER
• Change
OK
SETUP
SETUP
Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
Exit
Input Password
Old Password
New Password
Confirm Password
OK
0-9
…
œ√†
Input digits
Select
Cancel
ENTER
OK
• Master Password : If you forget your password, press 3,3,0,8 on the remote
control and then press [ENTER].
• Set the new password to something other than '0000'.
25
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지26
Initial Setup
Various PREFERENCE Settings
Auto Clock
Auto Clock enables the DVD Recorder+VCR to set the clock automatically
whenever it is in Standby mode (plugged in but powered off).
Use […/†] to select ‘Auto Clock‘.
Press [√] to go to the second level.
Use […/†] to set the Auto Clock Status to On or Off.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
• Off
On
Choose
ENTER
OK
SETUP
Exit
SETUP
Exit
Press [ENTER] to confirm.
VCR
This feature enables you to search for Index marks or specific times on your VHS tapes.
Use […/†] to select ‘VCR‘.
Press [√] to display the submenu.
Select ‘Index Search’ or ‘Go-To Search’.
If you select ‘Index Search’ and press [ENTER], a submenu appears.
- - Preference Page - -
Use […/†] to select the index number you want to search and press
[REW] or [FF].
Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
• Index Search
Go-To Search
Choose
ENTER
OK
Index Search
Press REW or FF to begin search or
enter a specific index number.
…
01
†
If you select ‘Go-To Search’ and press [ENTER], a submenu appears.
Use […/†] to change the time counter number and press [REW] or
[FF].
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
The VCR menu is activated only when a video cassette tape is inserted.
26
Choose
Index Search
• Go-To Search
ENTER
OK
SETUP
Go-To Search
Current Tape Counter is
00 : 00 : 00
Press REW or FF to go to
…
01 : 01 : 00
†
Exit
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지27
Initial Setup
AutoPlay
With Auto Play turn ON (the factory default setting), the VCR automatically
starts playback when you insert a tape with its safety tab removed.
Use […/†] to select ‘AutoPlay‘.
Press [√] to go to the second level.
Use […/†] to set the AutoPlay Status to On or Off.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
• Off
On
Choose
ENTER
OK
SETUP
Exit
OK
SETUP
Exit
Press [ENTER] to confirm.
YourDVD
???????
- - Preference Page - -
Use […/†] to select ‘YourDVD‘.
Press [√] to go to the second level.
Use […/†] to set the YourDVD Status to On or Off.
Press [ENTER] to confirm.
Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
SETUP
• Off
On
Choose
ENTER
Your DVD
Audio Language
Subtitle Language V
Surround Mode
OK
System Information
System Information helps service personnel identify key firmware
information about your DVD Recorder+VCR in case service is required.
- - System Info Page - Version
Main Build
Micom Software
Loader Version
…
œ√†
Choose
0000BBBBTT
VER0049.04
1.0.1
AA0600 A100
ENTER
OK
SETUP
Exit
SETUP
Exit
Restore Defaults
If you wish, you can reset the DVD Recorder+VCR to its original factory
settings.
Press [SETUP].
Use [œ/√] to select ‘Restore Defaults Page
‘.
Press [ENTER].
- - Restore Defaults Page - If you select this function all settings
will be removed and the product will be
set into initial (factory) mode.
…
œ√†
Choose
The Initialize menu will appear. Use the […†œ √] buttons to select
‘OK‘ and press [ENTER].
• Some options cannot be reset, including Parental Controls, Password, and Country Code.
• After Restoring Defaults the unit reboots automatically and the Installation menu
appears. You must set the country, language, channel, and clock settings again.
ENTER
OK
Restore Defaults
Are you sure you want to restore
default settings?
OK
Cancel
27
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지28
On-Screen Display Overview
The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded
disc or tape. To access the On-Screen Display (or OSD), press the [DISPLAY] button.
Displaying DVD Information
During disc playback, press [DISPLAY] to show information about the current disc.
While the disc information is displayed, press [DISPLAY] again to show the disc status window.
√√
DVD Video
00:00:25
» STOP
01:04:02
Changing menu options in display menu
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
•
Displaying icons on DVD disc
Use [œ√] to select the desired icon on the on-screen display. Press [ENTER] to display a submenu.
Use […†] to change the numbers. Press [ENTER] to confirm.
Title : Shows the current title number and total number of titles, and skips to the desired title
number.
Chapter : Shows the current chapter number and total number of chapters, and skips to the
desired chapter number.
Time Elapsed : Shows the elapsed playing time, and skips to the desired time.
Audio : Shows the current audio soundtrack language, encoding method, and channel number,
and changes the setting; AC3 5.1 CH English or AC3 2 CH English
Subtitle : Shows the current subtitle language, and changes the setting; Off, English, French or
Spanish
Repeat : Shows the current repeat mode, and changes the setting; Chapter, All or Off
A-B Repeat : Shows the current A-B repeat mode, and changes the setting; A-, A-B or Off
Random Repeat : Shows the current random repeat mode, and changes the setting; On or Off
OSD Language : Shows the current OSD language, and changes the setting; English, French or
Spanish
28
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지29
On-Screen Display Overview
•
Displaying icons on CDDA disc
Track : Shows the current track number and total number of tracks, and skips to the desired
track number.
Time Elapsed : Shows the elapsed playing time, and skips to the desired time.
Audio Effect : Shows the current audio effect, and changes the setting; L-Mono, R-Mono, Stereo
or Mix-Mono
Sound Effect : Shows the current sound effect, and changes the setting; Off, Concert, Living
Room, Hall, Bathroom, Cave, Area or Church
Repeat : Shows the current repeat mode, and changes the setting; Track, All or Off
A-B Repeat : Shows the current A-B repeat mode, and changes the setting; A-, A-B or Off
Random Repeat : Shows the current random repeat mode, and changes the setting; On or Off
OSD Language : Shows the current OSD language, and changes the setting; English, French or
Spanish
PLAYBACK
•
Displaying icons on DivX, Mpeg disc
Track : Shows the current track number and total number of tracks, and skips to the desired
track number.
Time Elapsed : Shows the elapsed playing time, and skips to the desired time.
Audio Effect : Shows the current audio effect, and changes the setting; MPEG
Subtitle : Shows the current DivX subtitle language, and changes the setting.
A-B Repeat : Shows the current A-B repeat mode, and changes the setting; A-, A-B or Off
Repeat : Shows the current repeat mode, and changes the setting;Folder, Single, Repeat One,
Repeat Folder or Random
Sound Effect : Shows the current sound effect, and changes the setting; Off, Concert, Living
Room, Hall, Bathroom, Cave, Area or Church
OSD Language : Shows the current OSD language, and changes the setting; English, French or
Spanish
29
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지30
On-Screen Display Overview
Displaying TV Information
While watching TV, press [DISPLAY] to display/remove the on-screen display.
If no rewritable DVD disc is inserted, you would see a screen like the following:
If a DVD+R or DVD+RW disc is inserted, the disc information is displayed at the
first key press. If you press [DISPLAY] again then the TV information is
displayed.
Input : Tuner
DVD-Video
CH-6
02:26 AM
■ STOP
Displaying VCR Information
The On-Screen Display provides feedback on the status of the DVD
Recorder+VCR and/or the currently loaded tape. To access the On-Screen
Display (or OSD), press the [DISPLAY] button.
Input : Tuner
CH-6
02:26 AM
■ STOP
Changing the TV Audio Channel
Some TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change the
TV audio using the [AUDIO] button.
Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
• STEREO+SAP Audio Signal : Stereo ➝ Mono (No display) ➝ SAP ➝ Stereo
• STEREO Audio Signal : Stereo ➝ Mono (No display) ➝ Stereo
• SAP Audio Signal : Mono ➝ SAP ➝ Mono
• MONO Audio Signal : Mono (No display)
The current audio channel is displayed on-screen.
• If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio channel.
• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.
• When an external input is selected, the audio channel can be switched only to Stereo.
Changing TV Channels
If no disc is playing, you can change TV channels using the [0-9] or [CH +/-] buttons on the remote control or [CH
…/†] buttons on the front panel.
Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125.
30
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지31
DVD Playback
Before You Begin
Press the [DVD] button to set the remote control to operate the DVD deck.
Turn the TV on and select the video input source connected to the DVD Recorder+VCR.
DVD Selected
Audio system: Turn the audio system on and select the input source connected to the DVD
Recorder+VCR.
Actions are now
for DVD
■ Stop
Playing a DVD
1 Press [EJECT] to open the disc tray.
2 Load your disc in the tray with the playback side down (label side up).
3 Press [EJECT] to close the tray.
4 READING appears on the front panel display, and playback starts automatically. If playback does not start,
press [PLAY (√)]. In some cases, the Disc menu might appear instead.
When a DVD+RW or unfinalized DVD+R is inserted, no title is played automatically but the current TV channel
displays on the screen.
1 If you want to play a title on the DVD+R (+RW), you must press
[MENU] or [PLAY] to display the disc menu of a thumbnail index for
each recorded title on the disc.
The index picture screen of the title will be displayed. Also title
information (name of recording, recorded day, time, recording
quality) will be displayed.
TITLE CH10
10:29AM 12/21/04
0:01:00SEP
TITLE CH10
10:34AM 12/25/04
0:01:00HQ
EMPTY
1:50:54SP
● Press REC to overwrite title(s).
2 Select a title to play using [œ √] then press [ENTER] or [PLAY].
If a Disc menu is displayed
• A Disc menu may be displayed when you load a DVD. Use the [œ √…†] buttons to select the title/chapter you
want to view, then press [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu.
• If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code must
be entered and/or the disc must be authorized; see ‘Set Parental Level‘ on page 24.
• The DVD Recorder+VCR will not play discs with Region codes different from the DVD Recorder+VCR. The Region
code for this DVD Recorder+VCR is 1 (one).
• Unless stated otherwise, all operations described below use the remote control. Some features may also be
available in the Setup menu.
• A disc which is recorded by computer at high speeds (greater than or equal to 2x) may not be recognized.
• A disc which is recorded with unauthorized movie material may not be played.
• A disc which is recorded by other recorder or not recorded correctly may not be recognized or played.
31
PLAYBACK
Playing a DVD+R (+RW)
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지32
DVD Playback
Still Picture and Frame-by-Frame Playback
1 Press [PLAY/PAUSE] during playback. The DVD Recorder+VCR will go into Pause mode.
2 You can back up or advance the picture frame-by-frame by pressing [FF (√√)] repeatedly during Pause
mode.
Fast Forward/Backward
1 Press [REW (œœ)] or [FF (√√)] during playback. The DVD Recorder+VCR will go into Search mode.
2 Press [REW] or [FF] to select the desired speed: √√ X2, √√ X4, √√ X8, √√ X16, √√ X32, √√ X64, √
(forward) or œ, œœ X2, œœ X4, œœ X8, œœ X16, œœ X32, œœ X64 (backward).
Slow Motion
Press [SLOW+] or [SLOW–] to enter Slow Motion mode. The default speed is 1/2. When you press [SLOW+] or
[SLOW–] repeatedly, the speed will be set to 1/4, 1/8, 1/16, and normal speed.
Changing the Audio Language
Press [AUDIO] and then press [AUDIO] repeatedly during playback to hear a different audio language or audio
track.
Subtitles
Press [SUBTITLE] and then press [SUBTITLE] repeatedly during playback to select among all available subtitle
languages.
Camera Angle
If a DVD contains scenes recorded at different camera angles, angle icon displays automatically. You can select
among these angles during playback.
Press [ANGLE] and then press it repeatedly during playback to select the desired angle.
The number of the current angle appears on the TV screen.
The Camera Angle icon is displayed on the TV screen when alternate angles are available.
Zoom
The Zoom function allows you to magnify the video image and scroll around the enlarged image.
Press [ZOOM] during Play mode to activate the Zoom function.
Each press of the [ZOOM] button changes the Zoom level as follows: X1 (normal size) ➝ X2 ➝ X3 ➝ X4 ➝
X1/2 ➝ X1/3 ➝ X1/4 ➝ X1 (normal size)
Use the [œ √…†] buttons to scroll around the zoomed picture.
To resume normal playback, press [ZOOM] repeatedly until the X1 (normal picture) appears.
• The Zoom function may not work on some DVDs.
• The Zoom function does not work in PAUSE mode.
32
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지33
DVD Playback
Repeat
1 To repeat the currently playing chapter, press [REPEAT]. REPEAT CHAPTER appears on the TV screen.
2 To repeat the currently playing title, press [REPEAT] a second time. REPEAT TITLE appears on the TV
screen.
To repeat the whole disc, press [REPEAT] a third time. REPEAT DISC appears on the TV screen.
You can play in other modes (including Repeat, A-B, Shuffle, or Scan) by pressing [REPEAT] repeatedly.
You can repeat a scene that starts when ‘Repeat A-‘ displays on the screen. To mark the end point, press [A-B]. Press
[A-B] again to repeat the scene.
A-B
You can repeat a scene between two points (A and B):
Press [PLAY/PAUSE] play to the start of the desired scene.
Press [A-B] to mark the start point.
Use [FF], [NEXT] to search the end point.
Press [A-B] to mark the end point.
The marked scenes are repeated continuously until you stop the repeat by pressing [A-B] key again.
Search
1 Press [SEARCH] to display the Search menu.
2 Use [œ √] to move to Title (T) or Chapter (C) and use […†] to set the title or chapter
number.
T/
œ
PLAYBACK
…
√
†
Selecting Titles
When a disc has more than one title, you can select among all available titles as follows:
Press [DISPLAY] and use […†] to select the Title icon. Press [ENTER] to display a submenu. Use […†] to
select the desired title number and press [ENTER] to confirm.
Selecting Chapters
When a title on a disc has more than one chapter, you can select among all available chapters as follows:
Press [PREV (§)] or [NEXT (∞)] briefly during playback to select the next or previous chapter.
To skip directly to any chapter during playback, press [DISPLAY]. Use […†] to select the Chapter icon, then
press [ENTER] to display a submenu. Use […†] to select the desired chapter number and press [ENTER] to
confirm.
33
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지34
DVD Playback
Disc Menus
Many DVDs contain Disc menus that allow you to access special features. To open a Disc menu, press [MENU].
Then use the [0-9] buttons to directly select the desired options, or use the […†] buttons to highlight your
desired selection and press [ENTER].
Press [MENU]. The Disc menu is displayed.
To exit the Disc menu, press [STOP] or [TV VIEW].
Title Menus
1 Press [TITLE]. If the current title has a menu, the Title menu will appear on the TV screen. Otherwise, the
Disc menu may appear.
The Title menu may contain camera angles, spoken languages and subtitle options, as well as the chapters
for the title.
Digest
*****
Press [DIGEST]. The Digest menu is displayed.
To exit the Disc menu, press [STOP] or [TV VIEW].
Digest
Title Digest
Chapter Digest
Title Interval
Chapter Interval
…† Select
34
■ Exit
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지35
VCR Playback
Before You Begin
Press the [VCR] button to set the remote control to operate the VCR deck.
Turn the TV on and select the video input source connected to the DVD Recorder+VCR.
Audio system: Turn the audio system on and select the input source connected to the DVD
Recorder+VCR.
VCR Selected
Actions are now
for VCR
■ Stop
Playing a VHS Tape
1 Insert a prerecorded video cassette.
If the DVD Recorder+VCR is powered off, it will power on automatically.
Make sure the TIMER indicator on the front panel display is not lit. If it is, press [POWER] once.
If a tape without a safety tab is inserted, the DVD Recorder+VCR will start playback automatically.
If the DVD Recorder+VCR is powered on by inserting a video cassette, playback will not start automatically.
2 Press [PLAY].
3 Press [STOP] to stop playback.
The STOP icon appears on the TV screen. If the tape reaches the end before [STOP] is pressed, the DVD
Recorder+VCR will automatically stop, rewind, and eject the tape.
Tracking Control
Auto Tracking
The automatic tracking function adjusts the picture to remove snow or streaks. It works in the following cases:
• When a tape is played for the first time.
• When the tape speed (SP, SLP) changes.
• When streaks or snow appear because of scratches on the tape.
Manual Tracking
If noise appears on the screen during playback, press the [TRACKING +/-] buttons on the remote control until
the noise on the screen is reduced.
• In case of vertical jitter, adjust these controls very carefully.
• Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more
than 3 seconds.
35
PLAYBACK
The PLAY icon appears on the TV screen. It is not necessary to select the tape speed (SP, SLP) for playback.
It will be automatically selected by the DVD Recorder+VCR.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:4 AM 페이지36
VCR Playback
Special Playback Features
Notes on special playback features
Horizontal lines (noise bars) will appear on the TV screen. This is normal.
The audio is automatically muted during special playback modes, so there is no sound during search, slow motion, etc.
During high-speed picture search, a short time is needed to stabilize tape speed when re-entering Play mode. Slight
interference may be observed during this time.
Fast Forward/Backward
This function lets you visually search forward and backward for a desired scene on your tape.
Press [REW] or [FF] during playback.
Search mode will be activated.
If the DVD Recorder+VCR is left in Search mode for more than 3 minutes, the DVD Recorder+VCR will
automatically resume Play mode to protect the tape and video heads.
To return to normal playback, press [PLAY].
Still Picture
1 Press [PLAY/PAUSE] during playback.
A still picture appears on the TV screen.
If a still picture vibrates vertically, stabilize it by using the [TRACKING +/-] buttons on the remote control.
If the DVD Recorder+VCR is left in Still mode for more than 5 minutes, the DVD Recorder+VCR will
automatically enter Stop mode to protect the tape and video heads.
To return to normal playback, press [PLAY].
Slow Motion
1 Press [SLOW+] for Slow Motion playback.
2 Press [SLOW+] and [SLOW-] repeatedly to adjust the Slow Motion playback speed.
Counter Memory Function
This is useful if there is a section of tape you want to view immediately after recording or if you want to return
to the same point several times.
Begin recording or playing a tape.
Press [STOP] when recording or playback finishes.
36
At the point you want to locate later, reset the real-time counter to 0:00:00 by pressing [CLEAR]. Continue
to play or record.
You can make the tape automatically stop when the counter returns to about ‘0:00:00‘ by setting the
counter to ‘0:00:00‘ in the ‘Go-To Search‘ function under ‘Setup’ ➝ ‘Preference’ ➝ ‘VCR’; see page 26.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지37
Other Disc Playback
Audio CD/MP3 PLAYBACK
The DVD Recorder+VCR can play audio CDs and MP3 files on CD-ROM, CD-R or CD-RW discs.
Insert the CD disc and close the tray. The Audio CD or MP3 CD menu
appears on the TV screen after a few moments to load the disc.
Use […†] to select a track or a file, then press [PLAY] or [ENTER].
••• Audio CD •••
During playback, the current track's elapsed playing time will appear
on the front panel display and menu. Playback will stop at the end of
the disc.
On the MP3 CD menu, you can display the folders on the disc.
Use […†œ √] to select the folder icon on the MP3 CD menu then press
[ENTER] or [PLAY].
You can also display just the tracks in the folders.
Use […†œ √] to select a folder then press [ENTER].
••• MP3 •••
While playing an Audio CD, use [FF] or [REW] for 2x speed playback.
Use [PLAY/PAUSE] to pause playback while the disc is playing.
To stop playback at any time, press [STOP].
PLAYBACK
• Press [REPEAT] to repeat a track (file) and press again to repeat the
whole disc.
• If the disc contains JPEG files as well as MP3 files, you can change the
Play mode to display JPEG image files by pressing [TITLE].
JPEG / Kodak Picture CD PLAYBACK
The DVD Recorder+VCR can display JPEG files on CD-R/RW and Kodak Picture CDs.
Insert your CD and close the tray. The JPEG CD or Kodak Picture CD
folder tree appears.
If there are folders which contain JPEG files (e.g., pictures on a Kodak
Picture CD), select the desired folder using […†œ √] and press
[ENTER].
37
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지38
Other Disc Playback
Select the thumbnail you want to display using […†œ √] and press
[ENTER].
The full size image will be displayed and a slide show starts
automatically with a time interval of 10 seconds.
Press [NEXT] or [PREV] to manually skip to the next or previous image.
Press [√] (or [œ]) to rotate the image (counter) clockwise.
Press [STOP] to exit the slideshow.
• If the disc contains MP3 files as well as JPEG files, you can change the
Play mode to play MP3 files by pressing [TITLE].
• When a CD contains both MP3 files and JPEG files, the default Play
mode is JPEG image files.
• The DVD Recorder+VCR can playback up to 1000 files per disc.
• MP3 files encoded below 64kbps are not supported.
Playing MP3 Files During a Slide Show
You can enjoy a slide show while listening to MP3 music files.
38
Prepare a CD which includes both MP3 and JPEG files.
Insert the CD and play an MP3 file.
Press [TITLE] while playing the MP3 file to change the Play mode. The music playback will not stop.
Select an image file and press [ENTER] to start the slide show.
The MP3 file you selected continues to play during the JPEG slide show.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지39
Basic Recording
Recording from TV
Follow the instructions below to record a TV program.
1 Turn on the DVD Recorder+VCR and load a recordable disc or tape.
Make sure your TV input is set to view the DVD Recorder+VCR.
2 Set the desired Recording mode by pressing [REC MODE] repeatedly.
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Average Quality - 4 hrs/disc), or
SLP (Low Quality - 6 hrs/disc).
VCR: SP (Standard Play), SLP (Super Long Play - 3 times SP)
3 If your DVD Recorder+VCR does not show a TV program, press [TV VIEW] on the remote control. Use [CH … /
†] to select the TV channel you wish to record.
4 Press [AUDIO] to select the audio channel to record (Stereo, SAP, or Mono).
The table below shows what audio channel will be recorded with different settings and different types of
broadcasts.
The last column (Monitor Audio) shows what you will hear during recording. For example, if the TV
broadcast is in Stereo, then setting the DVD Recorder+VCR to Stereo will record the broadcast in Stereo,
and the Monitor Audio will also be in Stereo.
• If you set the audio channel to SAP, but no SAP channel is broadcast, the main audio (Mono or Stereo) will
be recorded.
MONO
MONO
STEREO
Left
Right
MONO
MONO
SAP
STEREO
SAP
MONO
STEREO
MONO+ SAP
STEREO+SAP
Broadcast Audio
L Ch
R Ch
MONO
MONO
MONO
MONO
MONO
MONO
SAP
SAP
SAP
SAP
MONO
MONO
Monitor
Audio
MONO
STEREO
Left
Right
MONO
MONO
SAP
STEREO
SAP
MONO
RECORDING
Selected Audio
PLAYBACK
TV Broadcast
5 Press [REC (●)] once.
Recording will start. The REC indicator lights on the front panel display.
Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see One Touch Record on the next page.
6 Press [STOP (■)] to stop recording.
• The maximum number of DVD titles per disc is 49. If the DVD Recorder+VCR is powered off during DVD recording,
the recording will not be saved.
• If a DVD+RW or unfinalized DVD+R disc is inserted in the tray, no title is played automatically after loading is
finished.
• If you are recording to a blank DVD+R (+RW) disc, it may take up to 7 minutes for post processing after recording.
39
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지40
Basic Recording
One Touch Record (OTR)
One Touch Recording allows you add recording time in fixed increments at the touch of a button.
1 Follow steps 1-4 under Recording from TV.
2 Press [REC (●)] repeatedly to set the length of the recording.
Recording starts after the first press. Each subsequent press increases the recording time by 30 minutes
(DVD, to a maximum of 6 hours) within the available space or 30 minutes (VCR, to a maximum of 240
minutes). The recording time is displayed on the front panel display.
Checking the Recording Time
Total time and recorded time are displayed on the TV screen after pressing [DISPLAY] twice. Recorded time is
displayed on the front panel display.
To Pause the Recording
Press [PLAY/PAUSE] to pause the disc or tape during recording.
When you want to continue recording, press [PLAY/PAUSE] or [REC (●)].
Note
• To quit One Touch Recording, press and hold [STOP] for 3 seconds.
• The DVD Recorder+VCR will automatically power off when One Touch Recording ends.
Tip (VCR mode only)
• Always use [PLAY/PAUSE] for best results when making changes during recording.
For example: To change channels during recording, first press [PLAY/PAUSE] to put the unit in Pause mode. Then
select the desired channel on the DVD Recorder+VCR, and press [PLAY/PAUSE] again to resume recording.
• You cannot record on the VCR deck and DVD deck at the same time.
• While the VCR is recording, DVD playback is possible. However, while the DVD is recording, all VCR functions are
disabled.
40
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지41
Basic Recording
One Touch Copy - DVD to VHS
• If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted to
copy Macrovision encoded DVDs.
• Copy to VCR does not work in Progressive Scan Mode.
1 Insert a Disc.
Insert the disc you wish to copy in the DVD deck and close the disc tray.
2 Insert a VHS Tape.
Insert a blank VHS videotape into the VCR deck.
3 Press [COPY] on the remote control.
4 Select (DVD ➝VCR) and press [ENTER] or [COPY] to confirm.
5 Press [REC SPEED] to select the desired Record Mode in ‘Copy to Tape’
Quick-Copy Menu
menu:
• SP (Standard Play)
• LP (Long Play, 2 times SP).
Please Select Quick Record Option
DVD -> VCR
VCR -> DVD
Instructions
Enter-Confirm Move …†
6 Press [COPY] again to start copying.
7 Stop the Copy Process
To stop copying at any time, press [STOP]. You must stop the Copy process manually
when the DVD movie ends, or the unit may replay and record over and over again.
If you want to start copy any point of disc
Choose speed then
press COPY:
LP
SP
■ ■ ■ Stop
RECORDING
Find the place on the DVD (or Disc) from which you want to start recording using the
[PLAY/PAUSE], [REW] and [FF] functions.
Press [COPY] while DVD is in pause mode or in resume stop ( » STOP) mode.
Follow the same procedure 5-7.
Copy to Tape
Copy Edit (DVD ➝VCR)
During one touch copy you can search or change REC SPEED and resume copy.
During One Touch Copy press [PLAY/PAUSE] to enter COPY EDIT mode.
Search with [FF/REW] or [NEXT/PREV] button.
Press [COPY] and you can change REC SPEED.
Press [COPY] again to resume copy.
41
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지42
Basic Recording
One Touch Copy - VHS to DVD
You can copy the contents of a VHS tape to a DVD+R or DVD+RW using the [COPY] button. This allows you to
archive your old VHS tapes to DVD.
If the VHS videotape you are attempting to copy is copy-protected, you will not be able to copy the tape. It is not
permitted to copy Macrovision encoded tapes.
1 Insert a VHS Tape.
Insert the VHS videotape you wish to copy into the VCR deck.
2 Insert a DVD+R or DVD+RW disc.
Insert a blank DVD+R or DVD+RW disc in the DVD deck and close the disc tray.
When using a DVD+RW disc, you must initialize before copying; see page 46.
3 Find the place on the VHS tape from which you want to start recording using the [PLAY/PAUSE], [FF] and [REW]
functions. And press [STOP].
4 Press [COPY] on the remote control.
5 Select (VCR➝DVD) and press [ENTER] or [COPY].
6 Press [REC SPEED] to select the desired Record
Quick-Copy Menu
Mode in ‘Copy to Disc’ menu:
•
•
•
•
HQ (High Quality - 1 hr/disc)
SP (Standard Play - 2 hrs/disc)
EP (Extended Play - 4 hrs/disc)
SLP (Super Long Play - 6 hrs/disc)
Please Select Quick Record Option
DVD -> VCR
VCR -> DVD
Instructions
Enter-Confirm Move …†
7 Press [COPY] again to start copying.
8 Stop the Copy Process
To stop copying at any time, press [STOP].
Copying will stop automatically when the VHS tape ends.
42
Press [PLAY/PAUSE] to enter COPY EDIT mode.
Press [PLAY/PAUSE] again to playback.
Search with [FF/REW] button.
Press [COPY] to resume copy.
0 : 00 : 10
Copy to Disc
Updating the disc. This may take a few
minutes. Please wait...
Setup-Exit
During one touch copy you can search and resume copy.
Choose quality then
press COPY:
HQ
SP
EP
SLP
DVD Status
■ Stop
Instructions
Copy Edit (VCR ➝ DVD)
Copy to Disc
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지43
Timer Recording
The Timer Recording function allows you to record up to 8 programs within a period of one month.
1 Insert recordable media such as DVD+R ,DVD+RW, recordable VHS tape.
2 Press [TIMER].
or Press [SETUP] and select ‘Timer REC’. Then press [ENTER].
DVD Recorder
Init Setup ➞
Timer REC
œ √ Select
Init Setup
The ‘Timer Recording’ menu appears.
Use […†] to move to a timer recording slot, and press [ENTER] to modify
it.
Disc Oper
Disc Edit
Timer Recording
Timer REC
01/07 08:08:40 AM
Date Start
Stop Input Media Repeat Mode Result
New Input
1/1 1:00AM 2:00AM CH2
DVD Once
SP Overdus
If you did not set the clock on the DVD Recorder+VCR, you must do so before
programming a timer recording.
■ Delete
§ Prev Page
3 Enter the necessary information for your Timer Recording(s).
Timer Recording
Date
TIMER
Exit
01/07 08:08:40 AM
Start
Stop
Input
Repeat
7 : 0 PM
7 : 0 PM
CH 2
Once
…
1 / 7
†
Wed
Media
Title
Mode
DVD
TITLE CH2
SP
0-9
TIMER
Input Digits
Exit
ENTER
Confirm and Exit
Timer Recording
01/07 08:08:40 AM
Date
Start
Stop
Input
Repeat
1 / 7
7 : 0 PM
7 : 0 PM
CH 2
Once
Wed
[œ √] – Moves the cursor left/right.
[…†] – Changes the setting at the current cursor position.
Press [SETUP] to exit the Timer Record menu.
Press [ENTER] after filling in all the program information.
Press [TIMER] to display the Timer Record List.
Media
Title
DVD
TITLE CH2
ENTER
TIMER
Confirm and Exit
Exit timer rec
■
Mode
Delete
SP
●
Edit
4 Press [ENTER] to save the program.
The Timer Record List will appear.
5 Press [SETUP] to exit the Timer Record List.
6 Timer indicator will light or blinking. Power Off the DVD Recorder+VCR to start the Timer Recording.
43
RECORDING
• Date – Choose a date up to 1 month in advance, or select a daily or weekly
program.
• Start – Set the recording start time.
• End – Set the recording end time.
• Input – Choose the desired channel, or one of the external inputs from
which to record.
• Repeat – Choose frequency of the recording. Once, Daily, Weekly, Weekday.
• Media - Choose desired media (DVD or VHS) using […†].
• Title - Enter into title edit mode pressing [●].
• Mode – Choose a Record mode.
DVD: HQ, SP, SLP or EP
VCR: SP, SLP
Edit
∞ Next Page
ENTER
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지44
Timer Recording
• The Timer indicator lights on the front panel display when the DVD Recorder+VCR is ready for the Timer
Recording.
• The tape timer indicator is blinking if any of the following meets if no recordable tape is inserted.
Both the disc and tape timer indicators are blinking if tape and disc timer recordings are overlapped.
• The DVD Recorder+VCR will record the audio according to the current TV tuner setting (Stereo, Mono or SAP). Use
the [AUDIO] button to set the audio before switching the DVD Recorder+VCR to Standby mode.
• The DVD Recorder+VCR will automatically power off when the Timer Recording ends.
• There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordings
are set to record sequentially (one right after the other), the very beginning of the later program may not be
recorded.
Canceling a Timer Recording
You can clear a Timer Recording any time before the recording actually starts.
• Use […†] to select the program you want to erase on the Timer Recorder List. Press [■STOP] to delete the
program.
Stopping a Timer Recording in Progress
After a Timer Recording has started, you can still cancel the program by pressing and holding [■STOP] for 3
seconds.
Timer Recording Troubleshooting
Even if a Timer Recording is set, the DVD Recorder+VCR will not record if:
•
•
•
•
No disc is loaded.
A non-recordable disc is loaded.
Disc is protected in the ‘Disc Operation’ menu; see page 47.
There are already 49 titles recorded on the disc.
You cannot enter a Timer Recording if:
• A recording is already under way.
• The start time has already passed.
• Eight Timer Recordings have already been set.
If two or more Timer Recordings overlap:
• The earlier program takes priority.
• When the earlier program finishes, the later program starts.
• If two programs are set to start at exactly the same time, the program entered first takes priority.
Confirmation is not possible when:
• Disc is protected in the ‘Disc Operation’ menu; see page 47.
• There are already 49 titles recorded on the disc.
If the disc is damaged, the recording may not complete successfully, even if the Check field shows ‘Rec. OK‘.
Recording Priority
• Timer Recording and OTR (One Touch Record) have the same priority but they have lower priority than manual
recording. During manual recording Timer Recording or OTR will be ignored.
44
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지45
Recording from an External Input
Recording from External Components
You can record from an external component, such as a camcorder or VCR, connected to any of the DVD
Recorder+VCR’s external inputs.
1 Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages
11 and 14.
2 Use [ … †] to select the external input to record from.
•
•
•
•
Tuner: Built-in tuner
LINE1 : Audio/Video on front panel
LINE2 : Audio/Video Input on back panel
DV: DV input on front panel.
3 Load a recordable disc or tape.
4 Set the desired Recording mode by pressing [REC MODE] repeatedly.
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Average Quality - 4 hrs/disc), or
SLP (Low Quality - 6 hrs/disc).
VCR: SP (Standard Play), SLP (Super Long Play - 3 times SP)
5 Press [REC (●)] once.
Recording will start. The REC indicator lights on the front panel display.
Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see ‘One Touch Record‘ on page 39.
6 Press [STOP (■)] to stop recording.
Note
If your source is copy-protected, you will not be able to record it using the DVD Recorder+VCR. See ‘Copyright Notice‘
on page 4 for more details.
RECORDING
45
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지46
Recording from an External Input
Recording from a Digital Camcoder
You can record from a digital camcorder connected to the DV IN jack on the front panel of the DVD
Recorder+VCR.
You can use the DVD Recorder+VCR remote to control both the camcorder and the DVD Recorder+VCR. Before
recording, make sure the digital camcorder is properly connected to the front panel DV IN jack; see page 14.
The source signal must be DVC SD format.
Some camcorders cannot be controlled using the DVD Recorder+VCR remote.
If you connect a second DVD recorder using a DV cable, you cannot control the second recorder from this one.
You cannot control the DVD Recorder+VCR remotely from a component connected to the DV IN jack.
You cannot record date and time information from a DV cassette.
1 Make sure your digital camcorder is connected to the front panel DV IN jack; see page 14.
2 Press [INPUT] repeatedly to select the DV input.
DV appears on the front panel display and the TV screen.
3 Find the place on the camcorder tape from which you want to start recording.
For best results, pause playback at the point you want to start recording. Depending on your camcorder, you
can use the DVD Recorder+VCR remote to control the camcorder using the STOP, PLAY, and PAUSE
functions.
4 Press [REC] once to start recording.
Recording is automatically stopped if the DVD Recorder+VCR detects no signal. You can pause or stop the
recording by pressing [PLAY/PAUSE] or [STOP]. You cannot control the camcorder from the remote control
during recording.
What is DV?
Using DV, also known as i.LINK, you can connect a DV-equipped camcorder to the DVD Recorder+VCR using a
single DV cable for input and output of audio, video, data and control signals.
The i.LINK interface is also known as IEEE 1394-1995.
“i.LINK” and the “i.LINK” logo are trademarks.
• The DVD Recorder+VCR is only compatible with DV-format (DVC-SD) camcorders. Digital satellite tuners
and Digital VHS video recorders are not compatible.
• You cannot connect more than one DV camcorder at a time to the DVD Recorder+VCR.
• You cannot control the DVD Recorder+VCR from external equipment connected via the DV IN jack (including
two DVD Recorders).
• It may not always be possible to control the connected camcorder via the DV IN jack.
• Audio input to the DV IN jack should be 32 or 48kHz (not 44.1kHz).
• Picture disturbance on the recording may occur if the source component pauses playback or plays an
unrecorded section of tape, or if the power fails in the source component, or if the DV cable becomes
disconnected.
46
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지47
Disc Operation
Disc Initialize
• If you load a blank DVD+R (+RW) disc, it will be initialized (formatted to enable recording).
• Do not start recording until disc initialization is complete.
• If you load a DVD+RW that has already been used you can record a program immediately.
Disc Operation in DVD+RW disc
For recordable DVD media, such as DVD+R and DVD+RW discs, you can manage the disc using the Disc Menu.
The DVD+RW Disc Menu allows you to erase, lock, or unlock your disc. You can also make it compatible with
most other DVD players.
At first, go to Disc Operation mode.
Press [SETUP]. The Setup menu appears.
While ‘Disc Oper‘ is selected, press [ENTER] to go to the Disc
Operation page.
DVD Recorder
Init Setup ➞
Disc Operation
œ √ Select
Init Setup
If you select ‘Yes‘ and press [ENTER], all the contents of the disc
will be lost.
Erase
Finalize
Protect
Make Comp
Adapt
Disc Info
Disc Edit
Timer REC
RECORDING
Erase the disc (DVD+RW)
3 Use […/†] to select the ‘Erase’ menu.
4 If you want to erase the whole disc, press [ENTER].
5 To confirm, select ‘Yes‘. To cancel, select ‘No‘.
Disc Oper
Disc Operation
…†
ENTER
DISC
Exit
Select
OK
Exit
Erase
Erase this disc?
OK
Cancel
If you want to protect a disc from accidental recording, editing, or
erasing, you can lock the disc. Later, if you change your mind, you can
unprotect the disc.
Use […/†] to select ‘Protect’ menu.
If you want to protect the whole disc, press [ENTER].
EDITING
Protect Disc (DVD+RW)
Erase
Finalize
Protect
Make Comp
Adapt
Disc Info
Disc Operation
…†
ENTER
DISC
Exit
To confirm, select ‘Yes‘. To cancel, select ‘No‘.
Select
OK
Exit
Protect
Protect this disc?
If you select ‘Yes‘ and press [ENTER], all the contents of the disc will be protected.
OK
Cancel
47
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지48
Disc Operation
Make Compatible (DVD+RW)
'Make Compatible' for a DVD+RW will automatically create a menu
screen for navigating the disc. This menu screen is accessible by
pressing [MENU] or [TITLE].
Press […/†] to select ‘Make Compatible‘.
If you want to make the disc compatible, press [ENTER].
Erase
Finalize
Protect
Make Comp
Adapt
Disc Info
Disc Operation
Select
OK
Exit
…†
ENTER
DISC
Exit
To confirm, select ‘Yes‘. To cancel, select ‘No‘.
Make Compatible
Make Compatible?
If you select ‘Yes‘ and press [ENTER], your disc will be make compatible.
OK
Cancel
• ‘Make Compatible’ can take up to 3-4 minutes depending on the type of disc, how much is recorded on the disc,
and the number of titles on the disc.
• If you do not make your DVD+RW disc compatible, your edits will not be recognized by other DVD players.
Information
3 Press […/†] to select ‘Disc Info.
4 The Disc Info Menu shows you disc information, such as disc type,
number of recordings, total titles, free space, etc.
Erase
Finalize
Protect
Make Comp
Adapt
Disc Info
Select
OK
Exit
…†
ENTER
DISC
Exit
Label
Empty
Media
DVD+RW
Status
Recordable (NTSC)
Close
48
Disc Operation
Title NO.
154/4414MB
Remainder
HQ : 60 (M)
SP : 116 (M)
LP : 174 (M)
EP : 233 (M)
SLP : 349 (M)
SEP : 438 (M)
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지49
Disc Operation
Disc Operation in DVD+R disc
For recordable DVD media, such as DVD+R and DVD+RW discs, you can manage the disc using the Disc Menu.
The DVD+R Disc Menu allows you to rename your disc or finalize it so it will be compatible with most other
DVD players.
Finalize (DVD+R)
Finalizing a DVD+R ‘locks’ its recordings in place so the disc can be
played on most standard DVD players or computers equipped with DVDROM drives.
Use […] to go to the top menu.
Press [√] to display the Disc Information Menu.
Erase
Finalize
Protect
Make Comp
Adapt
Disc Info
Disc Operation
…†
ENTER
DISC
Exit
Select
OK
Exit
Press [√] and select ‘Finalize‘ for a DVD+R.
Finalize
Press [ENTER] as shown on the screen.
Finalize this disc?
OK
Select 'Yes' using […] and press [ENTER] to finalize the disc.
Cancel
Press [ENTER] again.
Press [SETUP] to go to the top disc menu.
• Once you have finalized a DVD+R disc, you cannot edit or record anything else on that disc.
• It may take over 7 minutes for finalizing the edited disk, you'd better wait till the set finish the finalizing operation.
• ‘Finalize’ can take up to 3-4 minutes depending on the type of disc, how much is recorded on the disc, and the
number of titles on the disc.
Change Disc Name (Adapt ???)
You can rename your disc to any name you choose. The default disc
name is ‘MY DVD‘.
Use […] to go tothe top menu.
Press [√] to display the Disc Information Menu.
Press [√] and select ‘Change Disc Name‘.
Press [ENTER] as shown on the screen.
Erase
Finalize
Protect
Make Comp
Adapt
Disc Info
Disc Operation
…†
ENTER
DISC
Exit
Select
OK
Exit
Adapt?
Adapt this disc?
The Keyboard Menu appears.
OK
Cancel
Use [œ √…†] to select and press [ENTER] to enter the name of the disc.
EDITING
CLR : Clear the disc name
SP : Space
DEL : Delete a character
SAVE : Save the disc name
Press [ENTER] again.
To save the name of the disc, select ‘SAVE‘ and press [ENTER].
49
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지50
Disc Edit
Title Menu
You can manage the titles on your DVD+R/RW discs using the Title
menu.
At first, go to Disc Edit mode.
Press [SETUP]. The Setup menu appears.
DVD Recorder
Init Setup ➞
Disc Edit
œ √ Select
Init Setup
Disc Oper
Disc Edit
Timer REC
While ‘Disc Edit‘ is selected, press [ENTER] to go to the Disc Edit
page.
Edit
TITLE CH 10
TITLE CH 10
10:20 am 12/21/04
10:34 am 12/21/04
SEP
HQ
Label
Erase
Divide
Protect
Chap Edit
Index Pic
…
œ√†
Label a Title
ENTER
Select
Confirm
To change the name of a title:
Select the title to be labelled using [ENTER].
SETUP
§
10:20 am 12/21/04
10:34 am 12/21/04
SEP
HQ
Press [ENTER] to change the title name.
After the new title name is complete, select ‘OK’ and press
[ENTER].
Select
Confirm
SETUP
§
Exit
∞ Next Page
Label Title
b c d
k l m
Space
y z _
‘A’
g h i
p q r
u v w
Backspace
‘a’
Input digits
§ Prev Page
several seconds.
Exit
Prev Page
TITLE CH 10
0-9
Erase a Title
2 Select the title to beerased using [ENTER].
3 Then select ‘Erase‘ using [… †].
4 Press [ENTER] to erase the title.
5 Select 'Yes' and press [ENTER] to confirm.
6 The Erase Title progress bar will be displayed. This may takes
Label
Erase
Divide
Protect
Chap Edit
Index Pic
…
œ√†
ENTER
Clear
OK
Cancel
Symbol
Backspace
∞ Next Page
œœ
…
œ√†
■
Select
Delete
Edit
TITLE CH 10
TITLE CH 10
10:20 am 12/21/04
10:34 am 12/21/04
SEP
HQ
Label
Erase
Divide
Protect
Chap Edit
Index Pic
…
œ√†
ENTER
Select
Confirm
SETUP
§
Exit
Prev Page
Exit
∞ Next Page
Erase
After erasing is complete, the erased title remains as an empty title.
Erase the title(s)?
OK
You can erase titles on DVD+RW discs only.
50
∞ Next Page
Select ‘Label’ using [… †] .
The Keyboard Menu will be displayed. Use [œ √…†] to select a
character or function and press [ENTER].
Exit
Edit
TITLE CH 10
TITLE CH 10
Exit
Prev Page
Cancel
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지51
Disc Edit
Divide
This feature allows you to divide a title into two titles.
Select the title to be divided using [ENTER].
Press [ENTER] when the preferred picture is on your TV screen.
Edit
TITLE CH 10
TITLE CH 10
10:20 am 12/21/04
10:34 am 12/21/04
SEP
HQ
Select ‘Divide’ using [… †] .
Press [ENTER] to divide the title.
Label
Erase
Divide
Protect
Chap Edit
Index Pic
Select 'Yes' and press [ENTER] to confirm.
…
œ√†
ENTER
Select
Confirm
§
Exit
Prev Page
ENTER
Confirm
SETUP
Exit
∞ Next Page
Edit
It may take a few minutes to divide the title.
■
Stop
Divide
Please wait....
Protect
If you want to protect a title from accidental recording, editing, or
erasing, you can lock the title. Later, if you change your mind, you can
unprotect the title.
Edit
TITLE CH 10
TITLE CH 10
10:20 am 12/21/04
10:34 am 12/21/04
SEP
HQ
Select the title to be protected using [ENTER].
Select ‘Protect’ using [… †] .
Press [ENTER] to protect the title.
Label
Erase
Divide
Protect
Chap Edit
Index Pic
…
œ√†
ENTER
Select
Confirm
SETUP
§
Select 'Yes' and press [ENTER] to confirm.
Exit
Prev Page
∞ Next Page
Protect
Protect the title(s)?
OK
Exit
The Protect Title progress bar will be displayed. This may takes several seconds.
Protect icon ‘ ’ will appear in front of Title name.
Cancel
Protect
Please wait....
Edit
10:20 am 12/21/04
10:34 am 12/21/04
SEP
HQ
Label
Erase
Divide
Protect
Chap Edit
Index Pic
…
œ√†
ENTER
Select
Confirm
SETUP
§
Exit
Prev Page
EDITING
TITLE CH 10
TITLE CH 10
Exit
∞ Next Page
51
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지52
Disc Edit
Edit Chapters
2 Select the title to be edited using [ENTER].
3 Select ‘Chap Edit’ using [… †] .
4 Press [ENTER] to edit the chapters.
5 Select 'Yes' and press [ENTER] to confirm.
Edit
TITLE CH 10
TITLE CH 10
The Chapter Edit Menu will be displayed. Use [œ √…†] to select
one of the various chapter marker functions (Add, Delete, or Hide).
Press [ENTER] to confirm.
Add/Delete a Marker
You can add a chapter marker anywhere in a title during playback.
Once the chapter is marked, you can use the chapter search feature as
described above.
You can add/delete chapter markers or delete all chapter markers in a
title.
SEP
HQ
Select
Confirm
SETUP
§
Exit
Prev Page
Exit
∞ Next Page
Chap Edit
Title
Play
Add Mark
Del Makr
Hide CH
…
œ√†
ENTER
Select
Confirm
SETUP
§
Exit
Prev Page
Exit
∞ Next Page
Chap Edit
Title
Play
Add Mark
Del Mark
Hide CH
Hide Chapters
This feature allows you to hide or unhide a chapter. After hiding a
chapter, the chapter is not deleted but only hidden. If a chapter is
hidden then it shows ‘Unhide Chapter‘ and vice versa.
Label
Erase
Divide
Protect
Chap Edit
Index Pic
…
œ√†
ENTER
10:20 am 12/21/04
10:34 am 12/21/04
…
œ√†
ENTER
Select
Confirm
SETUP
§
Exit
Prev Page
Exit
∞ Next Page
Change Index Picture
Each title displayed in the Playlist menu is represented by a thumbnail
picture taken from the start of that title or chapter. If you prefer, you
can select a different still picture from within the title.
Edit
TITLE CH 10
TITLE CH 10
10:20 am 12/21/04
10:34 am 12/21/04
Select the title to be edited using [ENTER].
Select ‘Index Pic’ using [… †] .
Press [ENTER] to change the index picture.
Label
Erase
Divide
Protect
Chap Edit
Index Pic
…
œ√†
ENTER
Select
Confirm
§
Exit
Prev Page
ENTER
Confirm
SETUP
Press [ENTER] when the preferred picture is on your TV screen.
Edit
■
52
SEP
HQ
Stop
Exit
∞ Next Page
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지53
Troubleshooting
Check the following guide for the possible cause of a problem before contacting customer support.
Symptom
Cause
Solution
No power.
The power cord is disconnected.
No picture.
The TV is not set to receive DVD
Recorder+VCR signal output.
Plug the power cord into the wall outlet
securely.
Select the appropriate video input on the
TV so the picture from the DVD
Recorder+VCR appears on the TV screen.
Connect the video cable securely.
No sound.
Playback picture is poor.
DVD Recorder+VCR does
not start playback.
The video cable is not connected
securely.
The TV power is turned off.
The equipment connected with the
audio cable is not set to receive
DVD Recorder+VCR signal output.
The audio cables are not connected
securely.
The power on the equipment
connected with the audio cable is
turned off.
The audio cables are damaged.
The disc is dirty.
Tape heads are dirty.
Tape is a rental or was recorded on
another VCR.
No disc is inserted.
No tape is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the
guide.
The disc is dirty.
The Parental Control level is set.
Some channels are skipped
over when using [CH…†].
The skipped channels were deleted
with the CH. Add/Del feature.
Picture or sound of
broadcasting channel is
weak or missing.
Camcorder image not shown.
Antenna or cables are loose.
Wrong Tuning Band is selected in
the DVD Recorder+VCR Setup menu.
Camcorder is off.
Replace with new ones.
Clean the disc.
Clean the video heads.
Use [Tracking +/–] for manual tracking
adjustment while a tape is playing.
Insert a disc or tape. (Check that the disc
indicator on the front panel display is lit.)
Insert a playable disc. (Check the disc
type, color system, and regional code.)
Place the disc with the playback side
down.
Place the disc on the disc tray correctly
inside the guide.
Clean the disc.
Cancel the Parental Control function or
change the rating level.
You cannot connect via the DVD
Recorder+VCR. Connect the component
directly to your TV.
Use the CH. Add/Del feature to restore
channels. See ‘Add/Remove Channels‘ on
page 18.
Tighten connections or replace cable.
Try all ‘Tuning Band‘ options; see page
17 for details.
Turn camcorder on and operate properly.
53
REFERENCE
The video signal from the external
component is copy-protected.
Turn on the equipment connected with
the audio cable.
EDITING
Picture from external input
is distorted.
Turn on the TV.
Select the correct input mode on the
audio receiver so you can listen to the
sound from the DVD Recorder+VCR.
Connect the audio cables securely.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지54
Troubleshooting
Symptom
Cause
Solution
Camcorder image via A/V
input to DVD Recorder+VCR
is not shown on TV screen.
Can’t play disc recorded
on this DVD Recorder+VCR
on another DVD player.
DVD Recorder+VCR’s source is not
set to LINE1/LINE2 composite.
Use INPUT to select AV input channel
(LINE1/LINE2 composite).
The disc was not finalized (or not
made compatible if using a
DVD+RW).
Some players will not play even a
finalized disc.
Discs recorded with copy-once
material cannot be played on other
players.
The remaining blank space on the
Cannot record or did not
disc is insufficient.
record successfully.
The source you are trying to record
is copy-protected.
When setting the recording
channel, the channel is tuned on
your TV’s tuner.
Clock in DVD Recorder+VCR is not
Timer Recording not
set to correct time.
possible.
Timer has been programmed
incorrectly.
TIMER indicator light does not
appear after programming timer.
Stereo Audio Record and/or TV is not Stereo-compatible.
Broadcast program is not in stereo
Playback not present.
format.
DVD Recorder+VCR A/V Out jacks
are not connected to TV A/V In
jacks.
DVD Recorder+VCR Audio/Video
Out is not selected for viewing at
the TV.
DVD Recorder+VCR’s TV audio
channel is set to SAP or MONO.
The remote control is not pointed at
Remote control does not
the remote sensor of the DVD
work properly.
Recorder+VCR.
The remote control is too far from
the DVD Recorder+VCR.
There is an obstacle in the path of
the remote control and the DVD
Recorder+VCR.
54
Finalize the disc; see page 47.
No solution.
No solution.
Use another disc.
You cannot record the source.
Select the channel on the DVD
Recorder+VCR’s built-in TV tuner.
Set clock to correct time. See ‘Set Clock‘
on page 19.
Reprogram Timer. See ‘Timer Recording‘
on page 42.
Reprogram Timer.
No solution.
No solution.
Make A/V connections. Stereo is
available only via A/V output from DVD
Recorder+VCR.
Select AUX or A/V source as TV input.
Set TV audio channel mode to Stereo.
See ‘Changing the TV Audio Channel‘ on
page 29.
Point the remote control at the remote
sensor of the DVD Recorder+VCR.
Operate the remote control within 23 ft
(7m).
Remove the obstacle.
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지55
Troubleshooting
Symptom
Cause
Solution
The batteries in the remote control
are dead.
The remote control is locked.
Replace the batteries.
The DVD Recorder+VCR is in the
abnormal status.
Press and hold POWER key on font over 5
seconds.
Press and hold [DVD/VCR] key for 5
seconds to reset the DVD Recorder+VCR.
Moisture Condensation
Moisture condensation can occur:
In locations where moisture condensation may occur:
When the DVD Recorder+VCR is moved from a cold
place to a warm place.
Keep the DVD Recorder+VCR plugged into an AC
power outlet with the power on. This will help
prevent condensation.
Under extremely humid conditions.
When condensation has occurred, wait a few hours
for the DVD Recorder+VCR to dry before using it.
DVD RESET : If the set is in malfunction, press [DVD/VCR] key on the front panel for 4 seconds. As this set is Digital
Multimedia Product, malfunction may occurs.
REFERENCE
55
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지56
Technical Specifications
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Signal system
AC 120V, 60 Hz
Maximum:25W, Power-OFF:3.4W
Without Leg : 16.9x3.3x12.3(430x85.5x314)(w x h x d) With Leg : 16.9x3.4x12.3(430x86.5x314)(w x h x d)
Net : 11.02 lbs (5.00kg)
Gross : 14.22 lbs (6.45kg)
41°F to 95°F (5°C to 35°C)
5% to 90%
NTSC
Recording
Recording formats
Recordable discs
Recordable time
DVD Video Recording, DVD-VIDEO
DVD+R, DVD+RW, DVD-R, DVD-RW
DVD ; Approx 1 Hour(HQ mode), 2 Hours(SP mode), 3 Hours(LP mode),
4 Hours(EP mode), 6 Hours(SLP mode), 8 Hours(SEP mode)
VCR ; SP: 2 Hours(T-120), SLP:6 Hours(T-120)/8 Hours(T-160)
Video recording format
Sampling frequency
Compression format
27MHz
MPEG 2
Audio recording format
Sampling frequency
Compression format
48kHz
MPEG1 Layer2
VCR Specifications
Head system
Timer
Tape speed
Tape width
Rewind time
Antenna
VHF output signal
Channel coverage
Frequency range
Signal-to-noise ratio
Dynamic range
Channel separation
4 Head Video, 2 Head Hi-Fi helical scan azimuth system
12-hour display type with AM, PM
SP: 33.35 mm/sec, SLP: 11.12 mm/sec
12.7 mm
less than 2 minutes (T-120)
75 ohms (VHF/UHF)
Channel 3 or 4 (Switchable)
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)
20Hz to 20kHz
43 dB
75 dB
45 dB
DVD Specifications
Laser system
Frequency response
Signal-to-noise ratio
Harmonic distortion
Dynamic range
Semiconductor laser, wavelength 650 nm
DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz
More than 90 dB
Less than 0.06%
More than 90 dB
Inputs
ANTENNA IN
VIDEO IN
AUDIO IN
DV IN
56
Antenna or CATV input, 75 Ω
1.0 Vp-p 75 Ω, sync negative, RCA jack x 2
-8.8 dBm more than 47 k, RCA jack (L, R) x 2
4 pin (i.LINK/IEEE 1394 standard)
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지57
Technical Specifications
Outputs
VIDEO OUT
S-VIDEO OUT (Y)
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
Audio output (digital audio)
Audio output (analog audio)
RF OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1
1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
0.5 V (p-p), 75 Ω, RCA jack x 1
1.1 Vrms (1 kHz, -6 dB), 600 Ω, RCA jack (L, R) x 2
Channel 3 or 4 (Switchable)
Design and specifications are subject to change without notice.
Accessories
RCA cable ............................................. 1
RF Coaxial cable ................................... 1
Batteries................................................ 1
Blank DVD+RW disc ............................... 1
Remote control ....................................... 1
Batteries ................................................. 2
Manufactured under license from Dolby Laboratories. ‘Dolby‘, ‘Pro Logic‘ and the double-D symbol are
trademarks of Dolby Laboratories.
DTS and DTS Digital Out are registered trademarks of Digital Theater Systems, Inc.
REFERENCE
57
DF-Q74D2N-LS(GB)_USA 05.1.25 6:5 AM 페이지58
Warranty
DEAM (Daewoo Electronics America) warrants each new electronic product manufactured by it to be free from
defective material and workmanship and agrees to remedy any such defect or to furnish a new part (at the
Company’s option) in exchange for any part of any unit of its manufacture which under normal installation, use
and service disclosed such defect, provided the unit is delivered by the owner to us or to our authorized
distributor from whom purchased or authorized service station intact, for our examination with all transportation
charges prepaid to our factory. To establish and receive warranty service at our factory or authorized service
facilities, proof of purchase/dated sales invoice is required. Written authorization must be obtained before any
merchandise is returned to the factory.
This warranty does not extend to any of our electronic products which have been subjected to misuse, neglect,
accident, incorrect wiring not our own, improper installation, unauthorized modification, or used in violation of
instructions furnished by us, nor units which have been repaired or altered outside of our factory, nor to cases
where the serial number thereof has been removed, defaced or changed.
This warranty is in lieu of all warranties expressed or implied and no representative or person is authorized to
assume for us any other liability in connection with the sale of our electronic products.
Over-the-counter exchange of initially defective units
A unit is described as initially defective when the dealer opens the unit and finds that it is inoperative or a
customer opening a new unit finds that it is initially defective. This unit may be returned to the factory by the
dealer for exchange. Under no circumstances will a customer be permitted to return an initially defective unit
directly to the factory.
Model
Parts
Labor
DVR-S04/DVR-S05
1 Year
3 months
This instrument is listed by Underwriter’s Laboratories, Inc. It is
designed and manufactured to meet rigid U.L. safety standards against
X-radiation, fire, casualty and electrical hazards.
Daewoo Electronics America Inc.
120 Chubb Ave,
Lyndhurst, NJ 07071 USA
For more information about this or other
Daewoo products, call 1-800-DAEWOO8.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 62
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:bb6ae791-bb9f-42cc-a571-7675bec408a0
Producer                        : Acrobat Distiller 4.0 for Macintosh
Create Date                     : 2005:01:25 06:11:46Z
Modify Date                     : 2005:02:28 10:25:44+09:00
Metadata Date                   : 2005:02:28 10:25:44+09:00
Creator Tool                    :   QuarkXPress3.3: LaserWriter 8.4.3 KH1-8.4.3
Document ID                     : uuid:4a86ce3a-4c12-4e8c-8533-2930c087fa6e
Format                          : application/pdf
Creator                         : ±è¼ºÈñ
Title                           : DF-Q74D2N-LS(GB)_USA
Author                          : ±è¼ºÈñ

EXIF Metadata provided by EXIF.tools