WINIA Electronics DLA37C7 37" LCD TV Monitor User Manual DLA 32C7 1of2

Dongbu Daewoo Electronics Corporation 37" LCD TV Monitor DLA 32C7 1of2

Contents

Manual 2

Selection of MultimediaInput Signal31When connecting PC, STB, DVD with Multimedia1. Pressing the "MULTIMEDIA" button on the remote controller.• Screen changes as follows whenever pressing the “MULTIMEDIA” button.Comp.1 => Comp.2 => HDMI => PC => Comp.1Note:• If sound signal is mono method, connect it to the L-terminal of the soundinput terminal.DISPLAYGUIDE TV/VIDEOMULTIMEDIAPOWER123456PC Comp.1Comp.2HDMI
Selection of MultimediaInput Signal321. If the message ‘No signal’ appears on the screen, adjust the PC output to a format listed in the MultimediaInput table.Multimedia Input FormatHDMI & PC modeNote :1. When you connect with component, PC (D-Sub), and HDMI, you must check the input resolution ofexternal devices.2. So if this mode is used at PC mode, the screen can be enlarged.Resolution V-freq HDMI PC(D-Sub) Component Standard640 X 480 60Hz O O X VESA Standard75Hz O O X VESA Standard800 X 600 60Hz O O X VESA Standard75Hz O O X VESA Standard1024 X 768 60Hz O O X VESA Standard75Hz O O X VESA Standard1280 X 768 60Hz O O X VESA Standard75Hz O O X VESA Standard1280 X 1024 60Hz O O X VESA Standard75Hz O O X VESA Standard720 X 480i 60Hz X X O720 X 480p 60Hz O O O1280 X 720p 60Hz O O O1920 X 1080i 60Hz O O O1920 X 1080p 60Hz O O O
Picture Adjustment33Note :• 16:9 : 16:9 will display a true 16:9 (anamorphic) picture with no aspectdistortions.• 4:3 : General TV screen currently broadcasted.• LB(16:9) : Enlarge vertical size of the 16:9 picture.• LBS(16:9) : Move the LB(16:9) picture to the upper direction.• LB(16:9) and LBS(16:9) screen are not available in PC and HDMI mode.• "Screen Size" function is not available in PIP mode.Adjustment of Aspect ratio in TV/Video/Component mode1. Press the "SCREEN SIZE" button• The screen changes as below whenever pressing the "SCREENSIZE" button.16:9 => 4:3 => LB[16:9] => LBS[16:9] => 16:916 : 9MUTESCREENSIZE CAPTIONPIP CH PIP CHPIPSWAP SOURCE POSITIONSLEEPCHSTILLADD/ERASELB(16:9)LBS(16:9)4 : 3
Picture Adjustment34Note.• You can adjust the PC menu only in the PC mode.• During the Auto Adjust, you must not alter a screen on the monitor.• During a moving picture, Auto Adjust is liable to incorrectly work. So you must execute Auto Adjust on astill image.• When Auto Adjust is not working correctly, you can adjust with H. Position, V. Position, Frequency andPhase.Adjustment of the screen in the PC mode1. Select Picture by pressing the "Menu" button.• The menu screen appears as follows.2. Select PC Screen Mode• Move to PC Screen Mode in the Picture menu bypressing the ” CH ” buttons.• Press the ” VOL ” button.Color tempPC Screen ModeOffN.RUserSelect506063. Select and adjust each items.• Move to item what you want by pressing the ” CH ”button.• Adjust each items by pressing the ” VOL ” button.Auto SetPhaseH. PositionV. PositionPC Screen ModeFrequencyAdjust505060100MENUFAVPREV.CHMUTEVOL VOLCHCHSTILL
Picture Adjustment35- The user may select various screens designed for a good picture without adjusting the brightness, contrastor color individually.Note.• Normal : For a highly defined image in a normally bright room• Dynamic : For a clear-cut image emphasizing high contrast for sports viewing• Cinema : Ideal for movies• User : Allows the user to customize settings as desiredColor tempOffGRN.RDynamicAdjust43806010Color tempOffGRN.RCinemaAdjust5060506Color tempOffGRN.RAdjust4570558Color tempOffGRN.RUserAdjust5060606When setting up various screen modes1. Picture Mode selects what you want. • Move to Mode in the Picture menu and Select desirable mode using the”VOL ” buttons.• Or press the “PICTURE MODE” button, then the screen status changes asfollowed: Normal => Dynamic => Cinema => User => Normal• The screen adjustment status changes as the following screens aredisplayed sequentially whenever pressing the “PICTURE MODE” button.• The screen returns to the mode prior to turning power off when thenturning power on again.CCSWAPP.MODE S.MODE S.EFFECTMTSSOURCE POSITION
Picture Adjustment36- You can enjoy various screens by adjusting Brightness, Contrast, Color, Sharpness, etc to the user’s taste.- Through color temperature control, you can change the tone of colorColor tempOffGRN.RSelect4570558Color tempOffGRN.RAdjust4570558When adjusting the screen to taste1. Select Picture by pressing the “Menu” button.• The menu screen appears as follows.2. Select and adjust each items. • Move to the PICTURE menu.• Whenever pressing the ” CH ” button, you canselect in order of Brightness, Contrast, Color, Tint,Sharpness and Noise Reduction.• You can adjust all items by pressing the ” VOL ”buttonsNote:• Brightness : Adjust the whole of screen brighter or darker.• Contrast : Adjust difference between brightness and darkness between objects and background on the screen.• Color : Adjust color thinly or thickly.• Tint : Adjust the natural tint of the image.• Sharpness : Adjust outline of the screen smoothly or sharply.• N . R : Reduce the noise in the picture due to poor reception or poor picture quality (Only IN TV (Analogmode) and AV1/2 mode).Note:• Tint actives when receiving a NTSC signal.• The adjusted levels are stored automatically in User mode.1. Move to the Color Temp. menu with ”CH ”buttons.• Using the ” VOL ” buttons, select the desired ColorTemperature.Note:• Normal : Normal White• Warm : Reddish white• Cool : Bluish whiteAdjustment of Color Temperature in TV
Sound Adjustment37When selecting various sound Effects1. Sound mode selects what you want. • Move to Effect in the Sound menu.• Select desirable Effect using the ” VOL ” buttons.• Or press the “S.EFFECT” button, then the sound status changes as followed:Off => Voice Effect => Dynamic Bass => OffAdjustEqualizerOnOffNormalSpeakerBBEAdjustEqualizerOnOffNormalSpeakerOffAdjustEqualizerOnOffNormalSpeakerM. VoiceNote.• Voice Effect : Allows human voice to be heard more clearly.• Dynamic Bass : Suitable for the bass effect.SWAPP.MODE S.MODE S.EFFECTMTSSOURCE POSITION
Sound Adjustment38When adjusting sound to taste1. Adjust the Balance • Move to Balance in the Sound menu.• Adjust the balance level by using the ” VOL ” buttons.AdjustEqualizerOnOffNormalSpeakerOff2. Select AVC (Auto Volume Control) • Move to AVC in the Sound menu.• Select either AVC On/Off using the ” VOL ”buttons.AdjustEqualizerOnOffNormalSpeakerOff- The user can enjoy various sounds by adjusting Balance, AVC, Effect, Equalizer and Digital Volume.
Sound Adjustment39AdjustEqualizerOnOffUserSpeakerOffAdjustEqualizerOnOffNewsSpeakerOffAdjustEqualizerOnOffNormalSpeakerOffAdjustEqualizerOnOffMovieSpeakerOffAdjustEqualizerOnOffMusicSpeakerOffWhen adjusting sound to taste3. Sound mode selects what you want.• Move to Mode in the Sound menu.• Select desirable Sound mode using the ” VOL ” buttons.• Or press the “SOUND MODE” button, then the sound statuschanges as followed:Normal => Movie => Music => News => User => NormalNote :• "Mode" function is available when the Effect is Off.SWAPP.MODE S.MODE S.EFFECTMTSSOURCE POSITION
Sound Adjustment40When adjusting sound to taste4. Adjust the audio Equalizer • Move to Mode in the Sound menu.• Select User mode using the ” VOL ” buttons.• Select and use the relevant frequency by pressing the ”CH ”buttons.• You can adjust the degree of the frequency by using the ” VOL ”buttons.5. Adjust the Digital Volume (Digital TV mode only) • Move to Digital volume in the Sound menu.• Adjust the Digital volume level by using the ” VOL ”buttons. Note:• Equalizer adjustment is available in User mode.• Equalizer: High quality sound range adjustment method usedfor audio product.100/330 Hz: Low sound range1/1.3 kHz: Middle sound range10 kHZ: High sound rangeNote:• Digital volume is available in DTV mode.AdjustEqualizer17OffUserDigital Vol.OnSpeakerOffSelectEqualizerOnOffUserSpeakerOffAdjust100 Hz330 Hz1 kHz3.3 kHz10 kHzEqualizer Setting
Sound Adjustment41Note: The availability of these additional audio tracks depends on the program.• In DTV broadcast reception, you can select audio tracks(simultaneous translations of the program into foreignlanguages) by pressing the “MTS” button.Choosing a Multi-Channel Sound (MTS) in analog and digital1. Mono Sound Selection (Mono/Stereo/Mono&SAP/Stereo&SAP) – AnalogTV Mode• In Stereo reception if the stereo is weak, you can switch to MONO bypressing the “MTS” button. Then the OSD character will be change to“Mono”.In Mono reception the depth of sound is improved.• To switch back to stereo, press the “MTS” button again.Note: The availability of these additional audio tracks depends on the program.2. Audio track Selection – Digital TV ModeSWAPP.MODE S.MODE S.EFFECTMTSSOURCE POSITIONSWAPP.MODE S.MODE S.EFFECTMTSSOURCE POSITION
Features - Closed Caption42SelectCaptionPIPBackground 7LanguageMGDI plusParental ControlISMInitializeOnEnglishOffCC on MuteAdjustNote.• The Closed Caption feature doesn’t work in Component, HDMI and PC modes• Closed Caption: The availability of captions depends on the program being broadcastCC1 : The Primary Synchronous Caption Service. These are captions in the primary language thatmust be in sync with the sound, preferably matched to a specific frame.CC2 : The Special Non-Synchronous Use Captions.This channel carries data that is intended to augment information carried in the program.CC3 : Secondary Synchronous Caption Service.Alternate program-related caption data, typically second language captions.CC4 : Special Non-Synchronous Use Captions. Similar to CC2.• The Closed Caption feature doesn’t work in PIP/POP mode.Viewing Closed Caption (On-Screen Text Messages) - Analog1. Caption mode selects what you want. • Move to Caption in the Features menu.• Select Caption using the ” VOL ” buttons.• Select desirable Analog CC using the ” VOL ” buttons.• The Analog CC changes as followed:Off => CC1 => CC2 => CC3 => CC4 => TX1 => TX2 => TX3 => TX4
Features - Closed Caption43SelectCaptionPIPBackground 7LanguageMGDI plusParental ControlISMInitializeOnEnglishOffCC on MuteAdjustSelectCaptionCaption StylePIPBackground 7LanguageMGDI plusParental ControlISMInitializeOnEnglishOffText SizeText FontText FontBG ColorBG OpacityAdjust1. Caption mode selects what you want. • Move to Caption in the Features menu.• Select Caption using the ” VOL ” buttons.• Select desirable Digital CC using the ” VOL ”buttons.• The Digital CC changes as followed:Off => Service1~6 => CC1~4 => Off2. Caption Style selects what you want. (In Digital TVmode Only) • Move to Caption Style in the Features menu.• Select Caption Style using the ” VOL ” buttons.• Press the ” CH ” buttons to select the desired sub-menu options (see options below), and then pressesthe ” VOL ” buttons.Note:• Service 1~6 in digital caption mode may not beavailable depending on the broadcast.Note:• The Closed Caption feature doesn’t work in PIP/POP mode.• The digital caption feature is available only in Digital TV mode. • The availability of captions depends on the program being broadcast.• Default means to follow the standard set by the broadcaster.• Text Size: This option consists of Default, Small, Standard, and Large. The default is Standard.• Text Font: This option consists of Default, Font1~7. You can change the font you want. The default is Style 0.• Text Color: This option consists of Default, Black, White, Red, Green, Blue, Yellow, Magenta, and Cyan. You canchange the color of the letter. The default is White.• BG Color: This option consists of Default, Black, White, Red, Green, Blue, Yellow, Magenta, and Cyan. You canchange the background color of the caption. The default is Black.• BG Opacity: This option consists of Default, Light, and Transparent. You can change the Background opacity of thecaption.Viewing Closed Caption (On-Screen Text Messages) - Digital
Features - PIP/POP441. Watching PIP/POP • By pressing the “PIP” button on the remote controllerrepeatedly, you can select one of the following settings:• If you want to change the position of sub picture, press the“POSITION” button.PIP (Picture-In-Picture) / POP (Picture-Of-Picture)SCREENSIZE CAPTIONPIP CH PIP CHPIPSWAP SOURCE POSITIONSLEEPCHADD/ERASESCREENSIZE CAPTIONPIP CH PIP CHPIPSWAP SOURCE POSITIONSLEEPCHADD/ERASE
Features - PIP/POP45PIP (Picture-In-Picture) / POP (Picture-Of-Picture)• If you want to swap main for sub, press the “SWAP” button.To swap main for sub change as followed: PIP/POP table• If you want to change sub screen input, press the “SOURCE” button.Sub screen change as followed: PIP/POP table• POP is available only in PC mode.(PIP is not available in PC mode.)PIP/POP mode table.Main\Sub ATV DTV Video1 Video2 Comp.1 Comp.2 HDMI PCATV X X X X X X O XDTV X X O O O O X XVideo1 X O X X X X O XVideo2 X O X X X X O XComp.1 X O X X X X O XComp.2 X O X X X X O XHDMI O X O O O O X XPC X O X X X X O XSIZE CAPTIONPIP CH PIP CHPIPSWAP SOURCE POSITIONSLEEPADD/ERASEPIP CH PIP CHPIPSWAPP.MODE S.MODE S.EFFECTMTSSOURCE POSITION
Features - Parental Control46SelectCaptionPIPBackground 7LanguageMGDI plusParental ControlInitializeOnEnglishOffAdjust0~9Enter PasswordSelectChange PasswordBlock OffUnblockMovie RatingTV RatingNO RatingAdjust0~9Enter a New Password1. Setting up your password • Move to Parental control in the Features menu.• The message “Enter password” will appear. Enteryour 4 digit password Note:• The default password of a new TV set is “2-2-1-1”.• Move to Change Password in the Parental Control• Press the ” VOL ” buttons to change thepassword.• The Change password screen will appear. Chooseany 4 digits for new password and enter them.Note:• If you forget the password, you must call the Service Center.Adjustment of Parental Control- The Parental control feature automatically looks out programs that are deemed inappropriate for children.- "Parental control" function is not available in PIP/POP mode.FAVPREV.CH CHOK1234567809FAVPREV.CH CHOK1234567809
Features - Parental Control47SelectChange PasswordBlock OffUnblockMovie RatingTV RatingNO RatingAdjustChange PasswordBlock OffUnblockMovie RatingTV RatingNO RatingSelectChange PasswordBlock OffUnblockMovie RatingTV RatingNO Rating2. Setting up Block • Move to Block in the Parental Control• Select either On or Off using ing the ” VOL ” buttons.SelectGPG NC NRRXPG13Movie RatingDISPLAYDISPLAYGUIDE TV/VIDEOMULTIMEDIAPOWER123Adjustment of Parental Control3. Setting up Movie ratings• Move to Movie ratings in the Parental Control and pressthe ” VOL ” buttons.• The Movie ratings screen will appear.Press the ” VOL ” buttons to select the MPAA categories:G: General audiencePG: Parental guidancePG-13: Viewers 14 and overR: Mature audienceNC: No children under age 17X: Adults onlyNR: Not rated• Press the “DISPLAY” button. Depending on your existingsetup, the “ “ symbol will be selected. (blank = unblocked“ “ = Blocked)Note:• The Parental Control will automatically block anycategories that are “more restrictive”. For example, if youblock PG-13 category, then R, NC and X will automaticallybe blocked also.
Features - Parental Control484. Setting up TV Rating • Move to Block and select Block to On.• Move to TV Rating in the Parental Control and press the ”VOL ” buttons.• The TV Rating screen will appear.Press the ” CH ” buttons to select one of the six agedbased categories:Y: Young children 14: Viewers 14 and overY7: Children 7 and overMA: Mature audienceG: General audiencePG: Parental guidance• Press the “DISPLAY” button. Depending on your existingsetup, the “ “ symbol will be selected. (blank =Unblocked “ “ = Blocked)Note:• The Y, Y7, G, PG, 14 and MA have additional options.FV: Fantasy violence / D: Sexually Suggestive Dialog / L: Adult Language / S: Sexual situation / V: Violence• The Parental Control will automatically block certain categories that are “more restrictive”. For example, if you block “Y”category, then Y7 will automatically be blocked. Similarly, if you block the G category, then all the categories in the “youngadult” group will be blocked (G, PG, 14, and MA). The Sub-ratings (D, L, S, and V) work together similarly.SelectYY7GPG14MAFVD L S VDLSVLSVTV RatingDISPLAYSelectChange PasswordBlock OffUnblockMovie RatingTV RatingNO RatingSelectYY7GPG14MAFVD L S VDLSVLSVTV RatingDISPLAY• Select on of these TV-Ratings(Y, Y7, G, PG, 14 and MA)and press the ” VOL ” buttons.• Press the “DISPLAY” button to select the sub-rating.5. Setting up No Rating• Move to No Rating in the Parental Control.• Select either Block or Unblock using the ” VOL ”buttons.Note:• The Parental Control will automatically block irregularcategories when No rating is setting.Note:• The Parental Control will automatically block certain categories that are “more restrictive”. For example,if you block “L” subrating in PG, then the L sub-rating in 14 and MA will automatically be blockedAdjustChange PasswordBlock OffUnblockMovie RatingTV RatingNO RatingAdjustment of Parental ControlDISPLAYGUIDE TV/VIDEOMULTIMEDIAPOWER
Features - ETC49AdjustCaptionPIPBackgroundLanguageMGDI plusParental ControlInitializeOnEnglishOff7AdjustCaptionPIPBackgroundLanguageMGDI plusParental ControlInitializeOnEnglishOff71. Setup of MGDi plus• Move to MGDi plus in the Features menu.• Press the ” VOL ” buttons, and then MGDi plus modeis On.• Press the “MENU” buttons, and then MGDi plus mode isOff.1. Setup of Menu Opacity• Move to Background in the Features menu.• Adjust the translucent level of OSD background using the”VOL ” buttons.Note:• DAEWOO's new technology, MGDI plus, brings viewers moredetailed, clearer and more natural image with picturecompensation algorithm.• MGDi plus is not available in PC and HDMI mode.When viewing how MGDi improves the picture.When adjusting the transparency of the menu screen
Features - ETC50Selection of LanguageAdjustCaptionPIPBackgroundLanguageMGDI plusParental ControlInitializeOnEnglishOff71. Select Language• Move to Language in the Features menu.• Select your desired language by pressing the ” VOL ”button. Then it will be setting automatically.• The language change as the followed:English => Français => Español => English
Time Setting51AdjustClockAuto Clock OnOffOffOff2EasternAM 12:00AM 12:00Off TimerOff TimeWake TimerWake TimeWake CH.Wake Vol.Time zoneDST1. Setting the Clock• Move to Clock in the Time menu.• To go to the Clock, press the ” VOL ”buttons.• Place the cursor to AM / PM / Hour / Min. / Month / Day/Year. with ” VOL ”buttons.• Set the AM / PM / Hour / Min. / Month / Day /Year.with the ” CH ” buttons and then presses the “MENU”button to complete.2. Setup of Auto Clock• Move to Auto Clock in the Time menu.• Select "On / Off" using the ” VOL ” buttons.Note:• Information of Auto Clock is required to DTV signal.3. Setting the Off Timer/ Off Time Setup• Move to Off Timer in the Time menu.• Select the Off timer to “On” using the ” VOL ”button.• Move to Off Time with the ” CH ” buttons.• To go to Off Time, press the ” VOL ”buttons.• Place the cursor to AM/PM / Hour / Min. with ” VOL ”buttons.• Set the AM/PM / Hour / Min. with the ” CH ” buttonsand then press the “MENU” button to complete.Note:• Confirm the Current Time is set. The Off Timer is onlyavailable when the Current Time is set.• The set will be turned off at selected time.• If adjusted once, the Off Time continues to operateeveryday unless canceling setup or turn the AC power off.AdjustClockAuto Clock OnOffOffOff2EasternAM 12:00AM 12:00AM 12:00Off TimerOff TimeWake TimerWake TimeWake CH.Wake Vol.Time zoneDSTAdjustClockAuto Clock OnOnOffOff2EasternAM 12:00AM 12:00AM 12:00Off TimerOff TimeWake TimerWake TimeWake CH.Wake Vol.Time zoneDSTMoveAdjustClockAuto Clock OnOnOffOff2EasternAM 12:00AM 12:00Off TimerOff TimeWake TimerWake CH.Wake Vol.Time zoneDSTOff Time AM 12 00Adjustment of TimeOff Time 12 00AM
Time Setting52AdjustClockAuto Clock OnOnOnOff2EasternAM 12:00AM 12:00AM 12:00Off TimerOff TimeWake TimerWake TimeWake CH.Wake Vol.Time zoneDSTAdjustClockAuto Clock OnOnOnOff2EasternAM 12:00AM 12:00AM 12:00Off TimerOff TimeWake TimerWake TimeWake CH.Wake Vol.Time zoneDSTAdjustClockAuto Clock OnOnOnOff2EasternAM 12:00AM 12:00AM 12:00Off TimerOff TimeWake TimerWake TimeWake CH.Wake Vol.Time zoneDSTAdjustClockAuto Clock OnOnOnOff2EasternAM 12:00AM 12:00AM 12:00Off TimerOff TimeWake TimerWake TimeWake CH.Wake Vol.Time zoneDST4. Setting the Wake Timer / Wake Time / Wake CH / WakeVolume• Move to Wake Timer in the Time menu.• Select the Wake Timer to "On" using the ” VOL ”button.• Move to Wake Time with the ” CH ” buttons.• To go to Wake Time, press the ” VOL ”buttons.• Place the cursor to AM/PM / Hour / Min. with ” VOL ”buttons.• Set the AM/PM / Hour / Min. with the ” CH ” buttonsand then press the “MENU” button to complete.• Move to Wake CH. in the Time menu.• Select the Wake CH. to desirable Channel using the ” VOL ”buttons.• Move to Wake Vol. in the Time menu.• Select the Wake Vol. to desirable Volume using the ” VOL ”buttons.Note:• Confirm the Current Time is set. The Wake Timer is only available when the Current Time is set.• The set will be turned on at selected time.• If adjusted once, the Wake Time continues to operate everyday unless canceling setup or turn the AC power off.• It is a convenient method to wake you up in the morningAdjustment of Wake Time
Time Setting53AdjustClockAuto Clock OnOnOnOff2EasternAM 12:00AM 12:00AM 12:00Off TimerOff TimeWake TimerWake TimeWake CH.Wake Vol.Time zoneDST5. Setting the Timezone and DST• Move to Timezone in the Time menu.• Select the Timezone to desirable Timezone using the ”VOL ”button.• The Timezone change as the followed:Central => Mountain => Pacific => Alaska => Hawaii =>Newf. => Atlantic => Eastern => Central• Move to DST in the Time menu. and select On, Off with ”VOL ”buttons.Note: Timezone and DST is available in Auto Clock mode6. Press the "SLEEP" button• By pressing the “SLEEP” button on the remote controllerrepeatedly, you can select one of the following settings:Sleep Timer: Off => 15 => 30 => 60 => 90 => 120 => Off• The set will turn off after the time you select.Note:• If an active signal is not present for about 30 minutes, theset will automatically turn to Stand-by mode.AdjustClockAuto Clock OnOnOnOff2EasternAM 12:00AM 12:00AM 12:00Off TimerOff TimeWake TimerWake TimeWake CH.Wake Vol.Time zoneDSTAdjustment of Off TimeMUTESCREENSIZE CAPTIONPIP CH PIP CHPIPSWAP SOURCE POSITIONSLEEPCHSTILLADD/ERASE
Channel Banner54DISPLAYGUIDE TV/VIDEOMULTIMEDIAPOWER1234561. General InformationChannel Mode: Display the current channel mode (Air/Cable/DTV).Channel Number: Displays the current channel number.Channel Name: Displays the current channel name. (Digital TV mode only)Program Name: Displays the current program name. (Digital TV mode only)Program information: Displays the current program information. (Digital TV mode only)Program time: Display the current / next program time (start ~ end). (Digital TV mode only)Icon: Displays the service items (Channel State, Screen Size, Audio Service, Dolby Digital, FavoriteChannel, and ETC) in the current program.Note: Owing to our policy of continuous improvement, the availability of icon which depends uponthe program may change.Current time: Displays the current time.Channel Banner- The channel banner displays information about a channel number, name,broadcasting time, audio service and more. You can see this banner by pressing“DISPLAY” button on the Remote Control.45678
Channel Banner55Electronic Program Guide (EPG) (Digital TV mode only)- The DTV Electronic Program Guide (EPG) displays program informationabout each channel, up to seven days ahead.- You can edit your own profiles, and record programs.- By pressing the “GUIDE” button to access EPG directly, you can see allchannels broadcasting now.Note:• The EPG channel is only available when watching DTV channels.DISPLAYGUIDE TV/VIDEOMULTIMEDIAPOWER1234561. Select a desired channel• Select a channel with the ” CH ” buttons.• Press the “GUIDE” button and move a program with the ” CH ”buttons.• If you need detail information, press the ” VOL” button.Program Guide12:45 pm Mon May 1Service10:00 am DTV Program11:00 am DTV Program12:00 pm DTV Program01:00 pm DTV Program02:00 pm DTV Program03:00 pm DTV Program06:00 pm DTV Program08:00 pm DTV Program09:00 pm DTV Program10:00 pm DTV Program14-1[P.M. 12 : 00 ~ P.M. 01 : 00]
Troubleshooting56Please check the following items before asking for repair service.Symptoms and SolutionsSymptom Check itemsNeither picture - Check the contact of sockets is all right.nor sound - Check the TV main power is on.Picture is OK - Check the Volume control is set to minimum or mute.but no soundSound is OK, but - Check the colour control and adjust it properly.no colour. - Check the program is in colour and not in black & white.The picture has - Check the antenna is installed correctly and if not, adjust the overlappedimage. antenna toward the broadcasting station.Picture has “snow - Check the antenna or its connection is correct and if not, correct thenoise”. antenna fault or connection cable fault.- Check if car traffic or neon sign disturbs the sound effect.Stripes on - Check the susceptible interference by other electronic devices such picture. as radio and television and keep magnetic or electronic devices away from the TV.Bad stereo or Dual - Long distance from the station or other radio waves can generate sound. bad sound reception. If so, change the mode to Mono.Remote control - Check if the batteries in the Remote control are dead.does not - Check if any object between IR sensor of the TV and the Remote work. control does not obstruct.123456789POWERMUTEPREV.CH0100
57TroubleshootingIn Digital TV mode• AFTER SALES SERVICEDo not hesitate to contact your retailer or service agent if a change in the perfomance of your productindicates that a faulty condition may be present.Some Problems will only occur when viewing DTV channels.Due to the different techniques involved in digital reception, DTV signal quality can be poor even if youappear to have a strong signal when viewing analogue programs.The DTV system requires a good quality signal to provide the best picture. When viewing analoguepictures, interference such as signal reflection from nearby buildings or mountains causes ‘ghosting’, butstill provides a viewable picture. For the DTV system, Interference such as this can disrupt the flow of datacausing the picture to appear to be made up of large blocks, or to freeze intermittently. If the picturedisappears completely, this could mean that signal quality is very poor. If this happens often, you may needto improve your aerial system to provide a better signal. This TV contains a complex microprocessor whichenables you to view enhanced digital services. Occasionally this device may need to be reset. This can bedone by pressing the stand-by button on your remote control or the power switch on the front panel.SYMPTOM CHECKSCheck that DTV transmissions are available fromthe transmitter you are currently using. If not, trydirecting the aerial at another local transmitter.No DTV Channels listed in the TV Guide after Auto SetupCheck analogue transmissions. If picture qualityis poor, you will need to improve or change youraerial system to receive DTV channels. Consult alocal installer.Blocky interference. Blocky interference indicates that the signalquality is poor.Picture freezes intermittently. You should consider improving your aerialsystem.To check the quality of your signal use the Signalstrength (See page 29)SYMPTOM CHECKS- Check the resolution and frequency of your PC.Then, adjust them to optimum condition for LCD TV.“NO SIGNAL” appears on the screen. - Refer to the table of PC mode input format. (Ifregistered resolution and Frequency on the table nolisted then no picture will be displayed.)“Not available” appears on the screen. - Ensure that the signal cable is firmly connected to PCand TV.Image is not clear. - Adjust the PHASE control.Image is not centered. - Run the Auto setup.In PC mode
58Standard ofProductOwing to our policy of continuous improvement, specifications may change.Model C32HDGB C37HDGB C42HDGBLCD Panel Screen Size 32” 37” 42” Aspect Ratio 16:9 16:9 16:9Resolution 1366 x 768 (WXGA) 1366 x 768 (WXGA) 1366 x 768 (WXGA)Pixel Pitch 170.25 x 510.75 x RGB 0.200 x 0.600 mm x RGB 0.227 x 0.681mm x RGBContrast Ratio 3000:1 3000:1 3000:1Dimension(W x H x D) Set Dimension 806 x 626.5 x 230mm 940 x 720 x 328.5mm 1060 x 823 x 328mmPower Consumption Max. 120W 150W 200WTV System NTSC, ATSCPower Source 120V~, 60Hz
LimitedWarranty59Daewoo Electronics America Inc. warrants this product to be free from defects in material andworkmanship and agrees to remedy any such defect. This warranty covers 1 year labor and 1 year parts from the date of original purchase. This warranty applies only to product purchased from authorized DEAM dealer and used within theboundaries of U.S.A.This warranty does not apply to product that has been improperly installed, subjected to usage forwhich the product was not designed, misused or abused, damaged during transportation, or which hasbeen altered or repaired in any way that affects the reliability or detracts from its performance.How you get warranty serviceWarranty service can only be provided by an authorized DEAM service center. For the closestauthorized service center to you, please contact your Dealer. In order to receive warranty service youmust provide the authorized service center with a copy of proof of purchase, signifying the date ofpurchase and the name of the Dealer from whom you purchased the product.Statutory warrantiesThe purchase may have rights under existing provincial or federal laws, and where any terms of thiswarranty are prohibited by such laws, they are deemed null and void, but the remainder of thewarranty shall remain in effect.If you require further assistance, please call:1-877-393-7823(1-877-DWESVC3)www.e-daewoo.com
P/N : 48586900E100-R0

Navigation menu