WINIA Electronics DPN4274NH 42 Inches Plasma Display Panel User Manual 3

Download:
Mirror Download [FCC.gov]
Document ID	441681
Application ID	hBNKty/lWS1raL6Mub7xkg==
Document Description	User Manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	243.33kB (3041658 bits)
Date Submitted	2004-06-17 00:00:00
Date Available	2004-06-16 00:00:00
Creation Date	2004-06-10 22:25:53
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2004-06-10 22:26:42
Document Title	User Manual 3

• Press the “Main Power” button
of the pdp set.
• The main power lamp turns on in
red color.
• Press the "POWER" button of
the remote control or any button
in the keypad of the main body.
• The LED of the pdp set turns on
in “green” color and the set turns
on.
Power
POWER
Press the “▼CH▲” button.
ZO
ZO
CH
CH 09
MONO PM
12 : 00
PR
SI
ZE
MENU
CH
CH
RE
SC
Adjust volume.
ZO
ZO
CH
PR
SI
ZE
MENU
•Sound reduces if pressing the
“◀VOL” button.
• Sound increases if pressing the
“VOL▶” button.
• Select the desired channel by
pressing the “▼CH▲” button or
the number button.
Ex) Channel 09
Press the “Main Power” button.
CH
CH
RE
SC
Vo l u m e
10
Press the “POWER” button to turn off the pdp set.
POWER
• TV turns off and he LED of
the pdp set changes to red
color.
21
Channel Setup
Automatic Channel Memory
- With this fuction, channels can easily be selected with “▼CH▲” button.
- Only channels with a signal can be memorized.
PO W
TV
VID
DVDO/
SAT
ER
CAT
DIS
PLA
TV/V
IDE
MU
LTIM
EDIA
CH
OM
ZO
OM
ZO
ME
NU
PRE
VC
SIZ
EN
SCRE
CH
MU
TE
F.R
/SL
OW
PLA
REC
STO
Press the “Menu” button.
ZO
ZO
CH
PIC
V O
PEN
/CLO
SE
• The menu screen appears as
follows.
• Press the “▼CH▲” button until
coming on the channel.
• Press the “◀VOL▶” to enter the
sub menu.
PAU
Normal
Mode
Picture
Sound
Screen
Brightness
31
Contrast
31
Color
31
Tint
31
Sharpness
31
PR
SI
ZE
MENU
PRE
CAP
F.F/S TION
LOW
CH
CH
RE
SC
Color Temp.
Normal
Function
Channel
Move
Select
MENU
Exit
Select the “Air/Cable” by pressing the “▼CH▲” button.
ZO
ZO
CH
Ch Mode
Picture
Sound
Air
Channel
42
Memory
Add
Fine Tune
Auto Search
Screen
PR
SI
ZE
MENU
• Select the “Air/Cable” by
pressing the “▼CH▲” button.
• Select “Air” to watch the general
broadcasting, and select “Cable”
to watch the cable TV by using
the “◀VOL▶” button.
CH
CH
RE
SC
Function
Channel
Move
22
Adjust
MENU
Exit
3
Select the “Auto Search”.
• Select the “Auto Search” with
the “▼CH▲” button.
ZO
Ch Mode
Air
ZO
CH
Picture
MENU
Sound
Channel
42
Memory
Add
Fine Tune
PR
SI
ZE
Auto Search
Screen
CH
CH
RE
SC
Function
Channel
Move
MENU
Exit
Press the “VOL▶” button.
PR
SI
ZE
MENU
• By pressing the “VOL▶” button
automatically searches OnAir
Channel as in the right.
• On Air TV, searches from 2
channels through 69 channels,
and on Cable TV, searches from 1
channels through 125 channels.
• In this case, if pressing the menu
button, the automatic Channel
search is channels searched by
that time are saved.
ZO
ZO
CH
RE
SC
CH
CH
Auto Searching
Air 42
15%
Please wait ...
MENU
Exit
Auto Search is completed.
• If auto search is completed, first
momorized channel appears on
the screen.
• You can search only the
memorized channels.
CH
ZO
12 : 00
CH 09
MONO PM
SI
ZE
PR
12 : 00
MENU
CH 09
MONO PM
Check by pressing the “▼CH▲” button.
ZO
Select
CH
CH
RE
SC
23
Additional Channel Memory
Additional
Channel Memory
Select the Channel to memorize.
• Select the Channel by pressing the
number button.
Ex) “13” channel
• This is method for
additionally memorizing
channels not
memorized due to weak
broadcasting signal.
• This function is
available even in the
[Menu] - [Channel] [Memory] [ADD/ERASE].
CH 13
MONO PM
12 : 00
POWER
VIDEO/
DVD
TV
SAT
CATV
Press the “ADD/ERASE” button.
ADD/
ERASE
• “ADD/ERASE” character alternatively appears
whenever pressing this button.
• Add appears in green color and Erase appears in
red color.
• Add 13 channel by pressing the "ADD/ERASE"
button.
DISPLAY
TV/VIDEO
MULTIMEDIA
CH 13
Add
ZO
PR
SI
ZE
MENU
RE
SC
CH
CH
PLAY
REC
STOP
CAPTION
F.F/SLOW
PAUSE
Check the Channel by pressing the “▼CH▲” button.
CH
• “13” is selected by pressing the “▼CH▲” button.
ZO
MUTE
F.R/SLOW
ZO
ZO
CH
PREV OPEN/CLOSE NEXT
SI
ZE
PR
CH
CH
MTS
24
ADD/
ERASE SLEEP
MENU
STILL
PICTURE SOUND
MODE
MODE
RE
SC
CH 13
MONO PM
12 : 00
Erase of Memorized Channel
Select the Channel to erase.
ZO
ZO
CH
PR
SI
ZE
MENU
• Select the Channel to erase with the
“▼CH▲” button.
• You may select the Channel by pressing
the number button.
Ex) “13” channel
CH
CH
RE
SC
Erase of Memorized
Channel
• This is function to
erase unnecessary
memorized channel.
• This function is
available even in the
[Menu] - [Channel] [Memory] [ADD/ERASE].
Press the “ADD/ERASE” button.
ADD/
ERASE
POWER
• If pressing the “ADD/ERASE” button,
the Channel number changes from
green color to red color.
• “ADD/ERASE” character alternatively
appears whenever pressing this button.
• After selecting the channel to want to
erase, press the "ADD/ERASE"
VIDEO/
DVD
TV
SAT
CATV
DISPLAY
TV/VIDEO
MULTIMEDIA
SI
ZE
MENU
PR
• Menu disappears if not operating any button for 10 seconds.
Press the menu button to erase the menu.
• Only automatically searched channels is memorized and unsearched
channels become erase status.
Cautions in menu setup
ZO
Notices:
ZO
CH
RE
SC
CH
CH
MUTE
F.R/SLOW
PLAY
REC
STOP
CAPTION
F.F/SLOW
PAUSE
PREV OPEN/CLOSE NEXT
PICTURE SOUND
MODE
MODE
MTS
STILL
ADD/
ERASE SLEEP
25
Fine Tune
When color looks separated
PO W
• Use fine tune function to adjust the
screen when picture is unclear or
lines appear.
TV
VID
DVDO/
SAT
ER
CAT
DIS
PLA
TV/V
IDE
MU
LTIM
CH
OM
ZO
EDIA
OM
ZO
ME
NU
PRE
VC
SIZ
EN
SCRE
CH
MU
TE
F.R
/SL
OW
PLA
CAP
F.F/S TION
LOW
REC
STO
PRE
V O
PEN
/CLO
SE
PIC
MO URE
DE
SO
MOUND
DE
PAU
NEX
STIL
MTS
AD
ERA D/
SE
SLE
EP
Select the [Channel] with the “Menu” button and the “◀VOL▶” button.
• Enter the sub menu of [Channel]
by pressing the “◀VOL▶”
button.
ZO
ZO
CH
MENU
Ch Mode
Picture
Sound
Air
Channel
42
Memory
Add
Fine Tune
PR
SI
ZE
Auto Search
Screen
CH
CH
RE
SC
Function
Channel
Move
26
Select
MENU
Exit
2
Select “Air/Cable” in [Ch Mode].
ZO
Sound
Air
Channel
42
Memory
Add
Fine Tune
Auto Search
Screen
CH
CH
RE
SC
Function
Channel
Move
CH
ZO
Adjust
MENU
Exit
Select Fine Tune
MENU
PR
SI
ZE
PR
SI
ZE
MENU
Ch Mode
Picture
• Select [Fine Tune] by using the
“▼CH▲” button.
• Until the screen becomes best
condition, adjust the screen by
pressing the “◀VOL▶” button.
Ch Mode
Picture
Sound
Air
Channel
42
Memory
Add
Fine Tune
Auto Search
Screen
• This function is used for
selecting “Air TV” and “Cable
TV”
• The screen is changed to “Air
TV” and “Cable TV” whenever
pressing the “◀VOL▶” button.
ZO
ZO
CH
CH
CH
RE
SC
Function
Channel
Move
Adjust
MENU
Exit
27
Watching Digital Broadcasts
Watching Digital
Broadcasts
• To watch digital
broadcasts:
- Purchase a separate
digital Broadcasting
Receiver(SET-TOP
BOX)
- Connect the PDP to a
Digital Broadcasting
Receiver as shown
below.
Connect a Digital Broadcasting Receiver to the
PDP
• Prepare supplied A/V cables.
• Connect the cables from the Digital TV Receiver output terminal to the
PDP(Component 1, 2) input terminal.
• When connecting the cables, be sure to match the cable colors.
POWER
VIDEO/
DVD
TV
SAT
CATV
DISPLAY
TV/VIDEO
MULTIMEDIA
Audio
Video
ZO
ZO
CH
PR
SI
ZE
MENU
RE
SC
CH
CH
MUTE
F.R/SLOW
PLAY
REC
STOP
CAPTION
F.F/SLOW
PAUSE
Digital Broadcasting Receiver
PREV OPEN/CLOSE NEXT
PICTURE SOUND
MODE
MODE
MTS
28
ADD/
ERASE SLEEP
(Set-Top Box)
STILL
Press the Power Buttons
POWER
• Turn the PDP and the Receiver ON.
3
Input Select
MULTIMEDIA
• Select [Component 1 or Component 2] by
pressing the “Multimedia” button of the
Remote Control or the "INPUT SELECT"
Key in KeyPad of the pdp set.
• Each time you press the “Multimedia”
button, different input modes appear. The
sequence is as follows:
Component1
Component2
DVI
PC
Select a Desired Channel and Function
• Select a desired channel and function by
using the Remote Control of Digital
Broadcasting Receiver.
NOTES:
1) Possible Digital Broadcasting signals: 1080i, 720p, 480p.
2) Antenna Connection:
Apartment : Check if community antenna receives digital broadcasts.
Private Houses: Set the indoor/outdoor UHF antenna to the direction
of the digital broadcasting transmitting company.
3) For detailed connection method, refer to the Owner’s Manual of Digital
Broadcasting Receiver.
4) What is a component? : Signals with which brightness and color are
separated, producing a sharp picture.
5) If the Digital Broadcasting Receiver has PC Output terminal or DVI
Output terminal, connect to ‘PC INPUT’ or ‘DVI INPUT’ at the back
panel of the PDP.
When watching the PDP by PC or DVI Input, some undesired signals
may be seen at the top and bottom area of the screen. In this case,
select [Menu] --> [Screen] --> [V. Size] to adjust.
29
Watching Cable Broadcasts
Watching Cable
Broadcasts
• To watch cable
broadcasts,
subscribe to your
local Cable TV
Broadcasting, and
then connect a cable
Broadcasting
Receiver TV to the
PDP as shown
below.
Connect a Cable Broadcasting Receiver to the
PDP.
• Prepare the A/V cable.
• Connect the receiver(Output) to PDP(Video Input) as shown below.
• When connecting to an external AV source, be sure to match the colors.
POWER
VIDEO/
DVD
TV
SAT
CATV
DISPLAY
TV/VIDEO
MULTIMEDIA
Video/Audio
ZO
ZO
CH
PR
SI
ZE
MENU
RE
SC
CH
CH
MUTE
F.R/SLOW
PLAY
REC
STOP
CAPTION
F.F/SLOW
PAUSE
Cable Broadcasting Receiver
PREV OPEN/CLOSE NEXT
PICTURE SOUND
MODE
MODE
MTS
30
ADD/
ERASE SLEEP
STILL
Press the Power Buttons
POWER
• Turn the PDP and the Receiver ON.
3
Input Select
TV/VIDEO
• Select [Video 1 or Video 2] by pressing
the TV/VIDEO button of the Remote
Control or the "INPUT SELECT" Key in
KeyPad of the pdp set.
• Each time you press the TV/VIDEO
button, different input modes appear. The
sequence is as follows:
Video1
Video2
TV
Select a Desired Channel and Function
• Select a desired channel and function by
using the Remote Control of the Cable
Broadcasting Receiver.
NOTES:
1) If your local cable company re-transmits digital broadcasts,
you may watch normal broadcasts or digital broadcasts
simultaneously. For detailed information, refer to your local
cable company.
31
Watching Satellite Broadcasts
Watching Satellite
Broadcasts
• To watch satellite
broadcasting,
subscribe to Digital
Satellite
Broadcasting, then
connect satellite
Broadcasting
Receiver to the PDP
as shown below.
Connect a Satellite Broadcasting Receiver to
the PDP.
• Prepare the A/V cable.
• Connect the receiver(Output) to PDP(Video Input) as shown below.
• When connecting to an external AV source, be sure to match the colors.
POWER
VIDEO/
DVD
TV
SAT
CATV
DISPLAY
TV/VIDEO
MULTIMEDIA
PR
SI
ZE
MENU
Video/Audio
ZO
ZO
CH
RE
SC
CH
CH
MUTE
F.R/SLOW
PLAY
REC
STOP
CAPTION
F.F/SLOW
PAUSE
Satellite Broadcasting Receiver
PREV OPEN/CLOSE NEXT
PICTURE SOUND
MODE
MODE
MTS
32
ADD/
ERASE SLEEP
STILL
Press the Power Buttons
POWER
• Turn the PDP and the Receiver ON.
3
Input Select
TV/VIDEO
• Select [Video 1 or Video 2] by pressing
the TV/VIDEO button of the Remote
Control or the "INPUT SELECT" Key in
KeyPad of the pdp set.
• Each time you press TV/VIDEO button, a
different input mode appears.
The sequence is as follows:
Video1
Video2
TV
Select a Desired Channel and Function
• Select a desired channel and function by
using the Remote Control of the Satellite
Broadcasting Receiver.
33
Watching a DVD Image
Watching a DVD
Image
• Component Input is
set to 480i and 480p
mode.
• Connect the cable
from the DVD Video
Output (Y, Pb/Cb,
Pr/Cr) to the
Component Input at
the back of PDP, and
connect the cable
from DVD Audio
output (Left, Right)
to the Audio Input at
the back of PDP.
Connect a DVD Player to the PDP.
• Prepare the AV cable.
• Connect the DVD(Output) to the PDP(Component or Video Input) as shown below.
• When connecting to an external AV source, be sure to match the colors.
POWER
VIDEO/
DVD
TV
SAT
CATV
DISPLAY
TV/VIDEO
Video
MULTIMEDIA
Audio
Video/
Audio
S-Video
ZO
ZO
CH
PR
SI
ZE
MENU
RE
SC
CH
CH
MUTE
F.R/SLOW
PLAY
REC
STOP
PICTURE SOUND
MODE
MODE
34
DVD
PAUSE
PREV OPEN/CLOSE NEXT
MTS
DVD
CAPTION
F.F/SLOW
ADD/
ERASE SLEEP
STILL
Press the Power Buttons
POWER
• Turn the PDP and the DVD ON.
3
Input Select
MULTIMEDIA
TV/VIDEO
• Select [Component 1 or Component 2,
Video1, Video2] by pressing the
“MULTIMEDIA or TV/VIDEO” button of the
Remote Control or the "INPUT SELECT"
Key in KeyPad of the pdp set.
• Each time you press the “MULTIMEDIA or
TV/VIDEO” button, a different input mode
appears. The sequence is as follows:
”button
• “MULTIMEDIA”
Component1
Component2
DVI
PC
”button
• “TV/VIDEO”
Video1
Video2
TV
Select a Desired Title and Function
• Select a desired title and function by
using the Remote Control of the DVD.
NOTES:
1) Y/Cb/Cr, which stands for DVD Player’s Output Terminal, can
also be written as Y/B-Y/R-Y, Y/Pb/Pr depending on the kinds
of DVD devices.
2) The way of connecting the DVD to the PDP is as follows:
Y <---> Y Cb <---> Pb, B-Y, Cr <---> Pr, R-Y
3) The DVD output can be Video, S-Video and/or Component
Video depending on the DVD devices. There are various
output modes, so be sure to check when you purchase it.
4) When connecting S-Video and Video simultaneously, only SVideo will be displayed on the screen.
35
Watching a VCR Image
Watching a
VCR Image
Connect a VCR to the PDP.
• Prepare the AV cable.
• Connect the Video(Output) to PDP(Video Input) as shown below.
• Video can use either
the video terminal or
the S-video terminal.
POWER
VIDEO/
DVD
TV
SAT
CATV
DISPLAY
TV/VIDEO
MULTIMEDIA
ZO
Video/Audio
PR
SI
ZE
MENU
S-Video
ZO
CH
RE
SC
CH
CH
MUTE
F.R/SLOW
PLAY
REC
STOP
CAPTION
F.F/SLOW
PAUSE
PREV OPEN/CLOSE NEXT
VCR
PICTURE SOUND
MODE
MODE
MTS
36
ADD/
ERASE SLEEP
STILL
Press the Power Buttons
POWER
• Turn the PDP and the VCR ON.
3
Input Select
TV/VIDEO
• Select [Video 1 or Video 2] by pressing
the “TV/VIDEO” button of Remote
Control or the "INPUT SELECT" Key
in KeyPad of the pdp set.
• Each time you press the “TV/VIDEO”
button, a different input mode appears.
The sequence is as follows:
Video1
Video2
TV
Select a Desired Title and Function
• Select a desired title and function by
using the Remote Control of the
VCR.
NOTES:
1) When connecting a Video, the S-Video terminal provides a
better image than the Video terminal.
2) When connecting to the Video terminal, connect 3 color AV
cables (video, left audio, right audio) to the PDP; for the SVideo terminal, connect the Audio terminal (Left, Right) in the
same way, and connect the S-Video cable (sold separately).
3) When connecting the Video terminal and the S-Video
simultaneously, the S-Video terminal is selected. This can be
checked by the “Display” button of the Remote Control.
37
Watching a Camcorder/Game Console Image
Watching a
Camcorder/Game
Console Image
• Enjoy images
recorded by
camcorder or the
game console after
connecting to the
PDP.
Connect a Camcorder/Game Console to the
PDP.
• Prepare the AV cable.
• Connect the Video(Output) to the PDP(Video Input) as shown below.
• When connecting to an external AV source, be sure to match the colors.
POWER
VIDEO/
DVD
TV
SAT
CATV
DISPLAY
TV/VIDEO
MULTIMEDIA
Video/Audio
ZO
ZO
CH
PR
SI
ZE
MENU
RE
SC
CH
CH
MUTE
F.R/SLOW
PLAY
REC
STOP
CAPTION
F.F/SLOW
PAUSE
PREV OPEN/CLOSE NEXT
PICTURE SOUND
MODE
MODE
MTS
38
ADD/
ERASE SLEEP
Game Console/Camcorder
STILL
Press the Power Buttons
• Turn the PDP and the
Camcorder/Game Console ON.
3
Input Select
TV/VIDEO
• Select [Video 1 or Video 2] by pressing
the “TV/VIDEO” button of the Remote
Control or the "INPUT SELECT" Key in
KeyPad of the pdp set.
• Each time you press the “TV/VIDEO”
button, a different input mode appears.
The sequence is as follows:
Video1
Video2
TV
Select Function
• Select the Function by using the
Remote Control of Camcorder or
Game Console.
NOTES:
1) When connecting a Video, the S-Video terminal provides a
better image than the Video terminal.
2) When connecting to the Video terminal, connect 3 color AV
cables (video, left audio, right audio) to the PDP; for the SVideo terminal, connect the Audio terminal (Left, Right) in the
same way, and connect the S-Video cable(sold separately).
3) When connecting a component, refer to “Watching a DVD
Image” on page 34-35.
39
Connecting PC(15pin D-sub)
Connecting PC
• DAEWOO PLASMA
supports resolution
of VGA, SVGA,
XGA, SXGA.
• Before connecting a
PC to the PDP, be
sure to adjust the
resolution of PC.
Before connecting to the PDP, set the
resolution of the PC.
• Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen
of the PC.
• Choose the SETTINGS tab in the DISPLAY Menu.
• In the SETTINGS Menu, select 640 x 480 or 800 x 600.
Connect the PC to the PDP.
• Prepare the PC cable (D-sub 15pin) and
the PC audio cable(Sold separately).
• Connect the PC(Output) to the
PDP(Input) as shown below.
POWER
VIDEO/
DVD
TV
SAT
CATV
DISPLAY
TV/VIDEO
MULTIMEDIA
ZO
ZO
CH
PR
SI
ZE
MENU
RE
SC
CH
CH
MUTE
F.R/SLOW
PLAY
REC
STOP
CAPTION
F.F/SLOW
PAUSE
Audio
15 PIN D-sub
PREV OPEN/CLOSE NEXT
PICTURE SOUND
MODE
MODE
MTS
STILL
ADD/
ERASE SLEEP
PC
40
3
Press the Power Buttons.
• Turn on the PDP and the PC.
Input Select
MULTIMEDIA
• Select [PC] by pressing the “MULTIMEDIA”
button of the Remote Control or PDP unit.
• Each time you press the “MULTIMEDIA”
button, a different input mode appears. The
sequence is as follows:
Component1
Component2
DVI
PC
Enjoy Dynamic Ultra Screen Monitor by
Using PC’s Keyboard or Mouse.
NOTES:
1) The resolution of the PC monitor is best at 640 x 480 (VGA).
2) If there is a [Vertical Frequency]setting menu in the [Display]
Menu of the PC, adjust the frequency to 60Hz.
3) If the PC resolution is too high, it may be hard to read letters.
Select a suitable resolution.
41
Connecting PC(DVI)
Connecting PC
• DAEWOO PLASMA
supports resolution
of VGA, SVGA,
XGA, SXGA.
• Before connecting a
PC to the PDP, be
sure to adjust the
resolution of PC.
• This product is not
supported by Plug
and Play, so select
Standard Monitor
when setting PC
monitor.
Before connecting to the PDP, set the
resolution of the PC.
• Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen
of the PC.
• Choose the SETTINGS tab in the DISPLAY Menu.
• In the SETTINGS Menu, select 640 x 480 or 800 x 600.
Connect the PC to the PDP.
• Prepare the DVI cable and the PC audio
cable(Sold separately).
• Connect the PC(Output) to the
PDP(Input) as shown below.
POWER
VIDEO/
DVD
TV
SAT
CATV
DISPLAY
TV/VIDEO
MULTIMEDIA
ZO
PR
SI
ZE
MENU
DVI-D INPUT
ZO
CH
RE
SC
CH
CH
MUTE
F.R/SLOW
PLAY
REC
STOP
Audio
DVI
CAPTION
F.F/SLOW
PAUSE
PREV OPEN/CLOSE NEXT
PICTURE SOUND
MODE
MODE
MTS
STILL
ADD/
ERASE SLEEP
PC
42
3
Press the Power Buttons.
• Turn on the PDP and the PC.
Input Select
MULTIMEDIA
• Select [DVI] by pressing the
“MULTIMEDIA” button of the Remote
Control or PDP unit.
• Each time you press the “MULTIMEDIA”
button, a different input mode appears. The
sequence is as follows:
Component1
Component2
DVI
PC
Enjoy Dynamic Ultra Screen Monitor by
Using PC’s Keyboard or Mouse.
NOTES:
1) The resolution of the PC monitor is best at 640 x 480 (VGA).
2) If there is a [Vertical Frequency]setting menu in the [Display]
Menu of the PC, adjust the frequency to 60Hz.
3) If the PC resolution is too high, it may be hard to read letters.
Select a suitable resolution.
4) DVI input port receives only Digital Signal.
5) Depending on the graphic card when plug & unplug the DVI
connection the screen may not display correctly.
Restart the computer if this happens.
43
PC and DVI Input Resolution Available in PDP
• Depending on graphic card, problems like no signal detected or line noises can happen. If these
problems happen, contact the graphic card company for help.
Resolution
640x350
640x400
640x480
720x400
720x480
720x576
800x600
832x624
1024x768
1152x864
1152x900
1280x720
1280x960
1280x1024
44
Horizontal Frequency(KHz) Vertical Frequency(Hz)
31.469
37.861
24.823
30.48
31.469
37.861
31.469
35
37.861
37.5
39.375
43.269
31.47
31.469
37.927
31.54
15.63
35.156
35.16
37.879
48.077
46.875
53.674
49.726
48.193(48.077)
48.363
53.95
56.476
60.241
60.023
68.677
80.66
70.84
54
63.851
67.5
77.094
61.796
71.713
45
60
75
85.938
46.433
63.981
70.66
70.1
85.1
56.4
60.0
70.1
85.1
59.9
66.7
72.8
75.0
75.0
85.0
60.1
70.1
85.1
60.0
25.0
56.3
57.2
60.3
72.2
75.0
85.1
74.0
59.3(59.8)
60.0
66.1
70.1
74.9(74.6)
75.0
85.0
100.0
84.0
60.0
70.0
75.0
85.0
66.0
76.0
60.0
60.0
75.0
85.0
43.4
60.0
66.5
Remark
IBM
VESA
NEC
PGA
IBM (DOS)
VESA
DOS
Macintosh
VESA
VESA
IBM
VESA
VGA
IBM
VESA
480P
PAL
VESA
VESA
VESA
VESA
VESA
VESA
Macintosh
Macintosh (OAK)
VESA
XGA
HP & VESA
Macintosh
VESA
VESA
Fujitsu
SUN
VAX
VESA
VESA
VESA
SUN
SUN
720P
VESA
VESA
VESA
VESA
VESA
VAX
DVI
PC
Selecting Picture Mode
Selecting Picture Mode
PICTURE
MODE
Selecting Picture
Mode
• Press the [PICTURE MODE] on the
Remote Control.
• First time, the current picture mode is
displayed by pressing the [PICTURE
MODE]
• Select the picture mode
that is appropriately set
depending on the kinds
of pictures, and enjoy
them.
Each Press of the Button Will Select
One of Four Picture Modes.
PICTURE
MODE
• Each time you press the button, a
different picture mode appears. The
sequence used is as follows:
POWER
VIDEO/
DVD
TV
* Dynamic:
For a highly defined image in a normally bright
room
For a clear-cut image emphasizing high contrast
for sports viewing
For a movie
Allows the user to customize settings as desired.
DISPLAY
TV/VIDEO
NOTES:
1) Normal, Dynamic, and Cinema Modes are factory preset values.
2) When adjusting sub-menus while you are in Normal, Dynamic,
and Cinema Modes, the Picture Mode will be automatically
converted to User Mode, and the adjustments will be made.
3) Selecting press the button of the [Initialize] in the [Features]
Menu will allow the Brightness, Contrast, etc. to return to the
factory preset values.
ZO
• After selecting a desired picture mode, the
menu on the screen will disappear.
• Normal, Dynamic, and Cinema Modes are
factory preset values.
If you want to customize the picture modes,
refer to the following page.
Menu on the Screen Will Disappear.
MULTIMEDIA
CH
MENU
PR
User
ZO
* Cinema:
* User:
Cinema
SI
ZE
* Normal :
Dynamic
CATV
Normal
SAT
RE
SC
CH
CH
MUTE
F.R/SLOW
PLAY
REC
STOP
CAPTION
F.F/SLOW
PAUSE
PREV OPEN/CLOSE NEXT
PICTURE SOUND
MODE
MODE
MTS
STILL
ADD/
ERASE SLEEP
45

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2004:06:10 22:26:42+09:00
Create Date                     : 2004:06:10 22:25:53+09:00
Producer                        : Acrobat Distiller 4.0 for Macintosh
Page Count                      : 25
Mod Date                        : 2004:06:10 22:26:42+09:00
Creation Date                   : 2004:06:10 22:25:53+09:00
Metadata Date                   : 2004:06:10 22:26:42+09:00

EXIF Metadata provided by EXIF.tools