User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4040430 |
| Application ID | puNMHrbrAMYQBhIFCvY8sQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 58.7kB (733749 bits) |
| Date Submitted | 2018-10-18 00:00:00 |
| Date Available | 2018-10-19 00:00:00 |
| Creation Date | 2018-09-21 14:24:39 |
| Producing Software | Microsoft® Office PowerPoint® 2007 |
| Document Lastmod | 2018-09-25 13:15:55 |
| Document Title | V-JETn ì‚¬ìš©ìž ë©”ë‰´ì–¼ |
| Document Creator | Microsoft® Office PowerPoint® 2007 |
| Document Author: | Windows ì‚¬ìš©ìž |
V-JETm2 / JET-R User’s Manual Package Contents Transmitter Receiver Specifications Product Usage Wireless Video Streaming Connector Type HDMI / USB-C Operating Frequency Range Wireless Distance Max. Resolution 57GHz ~ 64GHz Max. 10 meters (in Line of Sight) 4K/30Hz (3840 x 2160) Temperature Operating Temp: 0 °C ~ 50 °C Storage Temp: -20 °C ~ 70 °C Dimensions (W x D x H) Transmitter: 70 x 72 x 18 (mm) Receiver: 70 x 72 x 24 (mm) Power Input Transmitter: DC 5V / 900mA Receiver: DC5 V / 1A Panel Layout Transmitter Receiver ⓐ ⓓ ⓑ ⓒ ⓓ ⓑ ⓐ ⓒ ⓐ Charging Port (USB-C) ⓐ Display Device Connecting Port (HDMI) ⓑ Source Device Connecting Port (USB-C) ⓑ Power Input (micro USB) ⓒ LED Indicator ⓒ Re-set Button ⓓ Re-set Button ⓓ LED Indicator *Reset – If re-pairing is required, hold down the reset button of the transmitter until the LED light turns off then release it. Also, reset the receiver in the same way. LED Indicators LED Off The unit is in sleep mode or turned off LED Slow Blink The unit is on but not paired LED Fast Blink The unit is trying to be paired LED On The both units are paired and wirelessly connected Transmitter LED Indicator (wireless connection status) 2 LED lights: Weak / 3 LED lights: Good / 4 LED lights: Strong Installation ① Receiver Installation 1. Turn on your display device 2. Connect the receiver and the display device using the HDMI+USB cable provided - If the USB power from the display device is not sufficient, please use a separate 5V power adapter 3. Check if input mode of the display device is set to the HDMI port connected with the receiver 4. Make sure that the receiver faces to the transmitter ② Transmitter Installation 1. Turn on your source device 2. Connect the transmitter and the source device using the USB-C cable provided 3. Make sure that the transmitter faces to the receiver * You can charge the source device trough the charging port on the transmitter when its battery is low How to mount Receiver on TV Pull off the brackets at the bottom of the receiver Receiver mounted on the top of TV Federal Communication Commissi on Interference Statement • • • • • • • • • • • • • This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer ence, and (2) this device must accept any interference received, including inte rference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a re sidential installation. This equipment generates, uses and can radiate radio fre quency energy and, if not installed and used in accordance with the instructio ns, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If t his equipment does cause harmful interference to radio or television receptio n, which can be determined by turning the equipment off and on, the user is e ncouraged to try to correct the interference by one of the following measures: m that elp. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different fro to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for h FCC Caution: Any changes or modifications not expressly approved by t he party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction wit h any other antenna or transmitter. • • • • Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set f orth for an uncontrolled environment. This equipment should be install ed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the follow ing conditions: • 1) The antenna must be installed such that 20 cm is maintained bet ween the antenna and users, and • 2) The transmitter module may not be co-located with any other tra nsmitter or antenna. • As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed • IMPORTANT NOTE: In the event that these conditions can not be met (f or example certain laptop configurations or co-location with another tra nsmitter), then the FCC authorization is no longer considered valid and t he FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end produc t (including the transmitter) and obtaining a separate FCC authorization. • End Product Labeling • This transmitter module is authorized only for use in device where the a ntenna may be installed such that 20 cm may be maintained between t he antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: 2ALI9V-VJETM2”. The grantee 's FCC ID can be used only when all FCC compliance requirements are m et. • Manual Information To the End User • The OEM integrator has to be aware not to provide information to the e nd user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. • The end user manual shall include all required regulatory information/ warning as show in this manual.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2018:09:21 14:24:39+08:00 Creator Tool : Microsoft® Office PowerPoint® 2007 Modify Date : 2018:09:25 13:15:55+08:00 Metadata Date : 2018:09:25 13:15:55+08:00 Format : application/pdf Creator : Windows 사용자 Title : V-JETn 사용자 메뉴얼 Producer : Microsoft® Office PowerPoint® 2007 Document ID : uuid:b0081a17-bead-49c6-aa94-3ac474fdefad Instance ID : uuid:1a296b97-626e-4fe7-913a-e2db445245df Page Count : 6 Language : zh-TW Author : Windows 사용자EXIF Metadata provided by EXIF.tools