Users Manual
WIZnet Co., Ltd WizFi310 SPECIFICATION V1.0 WizFi310 UART WiFi Module Specification V1.0 WiZnet Co.,Ltd main8096@wiznet.co.kr © 2015 WiZnet all rights reserved. Mentioned in this document , the actual company and product names, trademarks are their respective owners. After update the new version, this document without prior notice. COPYRIGHT © WIZNET CO., LTD ETDX1602191815 WIZnet Co., Ltd WizFi310 SPECIFICATION V1.0 Content 1. General Description.................................................................................................................. 1 2. Features.........................................................................................................................................2 3. System Block Diagram............................................................................................................. 4 4. Module Hardware Description..............................................................................................5 4.1 Module photo........................................................................................................................................... 5 4.2 Package information.............................................................................................................................. 5 4.3 Pin definition.............................................................................................................................................6 4.4 Reference design..................................................................................................................................... 7 5. Electrical Specification............................................................................................................. 8 5.1 General specification..............................................................................................................................8 5.2 802.11b Mode...........................................................................................................................................8 5.3 802. 11g Mode..........................................................................................................................................9 5.4 802. 11n HT20 Mode..............................................................................................................................9 5.5 802. 11n HT40 Mode............................................................................................................................10 6. Order information....................................................................................................................11 6.1 Order part number................................................................................................................................11 6.2 Module size..............................................................................................................................................11 7. Contact information................................................................................................................12 8. Modification records.............................................................................................................. 12 COPYRIGHT © WIZNET CO., LTD ETDX1602191815 WIZnet Co., Ltd WizFi310 SPECIFICATION V1.0 1. General Description WizFi310 module is a Wi-Fi module that fully compliant with IEEE 802.11b/g/n wireless standards, It combines an ARM-CM3 MCU, WLAN MAC, a 1T1R capable WLAN baseband, and RF in the module. It have onboard antenna, and external antenna interface, RF output PIN also exist in the board. WizFi310 internally integrated TCP / IP protocol stack, supporting numerous protocols such as ARP, IP, ICMP, TCP, UDP, DHCP CLIENT, DHCP SERVER, DNS and other etc. It supports AP mode, Station mode. It also support rich AT command for all kinds of application. Users can easily and quickly use it to wifi networking and data transmission. The baud rate of module serial port is up to 921600bps, which can fully meet the low-rate applications. In network part, WizFi310 supports storing network parameters in the module, and reduce time connect to network. The module has built-in WEB server, supporting wireless network parameters configuration, supporting wireless firmware upgrade. It also supports WPS and EasyConfig. In application part, HTTP, MQTT, MDNS and SSL also be supported. It also provides a bunch of configurable GPIOs which are configured as SPI ,UART, I2C, I2S, PWM, for different applications and control usage. WizFi310M integrates internal 2M SRAM ,and 512KB DRAM and 2MB flash for complete WIFI protocol functions. COPYRIGHT © WIZNETCO., LTD ETDX1602191815 WIZnet Co., Ltd WizFi310 SPECIFICATION V1.0 2. Features Application UART serial AT command set operation Support for multiple baud rate Support wireless configuration and OTA upgrade firmware Support the UART interface, OTW(over the wire) upgrade function Support for fast networking, easyconfig, WPS function Support MDNS, MQTT, HTTP, TLS applications Support TSL1.2 Standards Supported 802.11b/g/n compatible WLAN 802.11e QoS Enhancement (WMM) 802.11i (WPA, WPA2). Open, shared key,and pair-wise key authentication services WIFI WPS support Light Weight TCP/IP protocol WLAN MAC Features CMOS MAC, Baseband PHY, and RF in a single chip for 802.11b/g/n compatible WLAN Complete 802.11n solution for 2.4GHz band 72.2Mbps receive PHY rate and 72.2Mbps transmit PHY rate using 20MHz bandwidth 150Mbps receive PHY rate and 150Mbps transmit PHY rate using 40MHz bandwidth Backward compatible with 802.11b/g devices while operating in 802.11n mode Compatible with 802.11n specification Frame aggregation for increased MAC efficiency (A-MSDU, A-MPDU) Low latency immediate High-Throughput Block Acknowledgement (HT-BA) Long NAV for media reservation with CF-End for NAV release PHY-level spoofing to enhance legacy compatibility Power saving mechanism WLAN PHY Feature 802.11n OFDM One Transmit and one Receive path (1T1R) COPYRIGHT © WIZNETCO., LTD ETDX1602191815 WIZnet Co., Ltd WizFi310 SPECIFICATION V1.0 20MHz and 40MHz bandwidth transmission Short Guard Interval (400ns) DSSS with DBPSK and DQPSK, CCK modulation with long and short preamble OFDM with BPSK, QPSK, 16QAM, and 64QAM modulation. Convolutional Coding Rate: 1/2, 2/3,3/4, and 5/6 Maximum data rate 54Mbps in 802.11g and 150Mbps in 802.11n Fast receiver Automatic Gain Control (AGC) Peripheral Interfaces Maximum 2 PCM with 8/16KHz sample rate Maximum 2 SPI supported with baud rate up to 41.5MHz. Support 4 PWM with configurable duration and duty cycle from 0 ~ 100% Support 4 External Timer Trigger Event (ETE function) with configurable period in low power mode Maximum 20 GPIO pins A high speed UART interface with baud rate up to 4MHz COPYRIGHT © WIZNETCO., LTD ETDX1602191815 WIZnet Co., Ltd WizFi310 SPECIFICATION V1.0 3. System Block Diagram Figure 3-1 WizFi310 System Diagram COPYRIGHT © WIZNETCO., LTD ETDX1602191815 WIZnet Co., Ltd WizFi310 SPECIFICATION V1.0 4. Module Hardware Description 4.1 Module photo Figure 4-1 WizFi310 Top View Figure 4-2 WizFi310 Bottom View 4.2 Package information Figure 4-3 Module Pin Size (mm) COPYRIGHT © WIZNETCO., LTD ETDX1602191815 WIZnet Co., Ltd 4.3 WizFi310 SPECIFICATION V1.0 Pin definition Table 4-1: Pin Definition Pin Serial No. Name Type GND Ground 22 VCC3.3V Power RF_OUT VDDIO Power 11 RESET 17 LINK O,PU 23 TXD 26 RXD 1,3,12,13,14,16,2 0,21,33 Description All ground pins are connected to ground pad or the copper. 3.3V power supply. 2.4GHz RF output 3.3V for Digital IO or digital blocks Module reset pin, Active low. Work status indicator pin of module, output low effective. Serial data communication interface send Serial flow control pin, ready to receive, Active low. Serial flow control pin, The default output low. 24 RTS Active low, ready to receive data / request the other party to send data. Serial flow control pin, Input pull. Active low, 25 CTS ready to send data/request each other to send data. High level cannot send data, low level can send data. Others NC NC Remain disconnected when no use Note: 1. I - input O - output PU – pulling up 2. Pin in NC, remains disconnected PD - pulling down NC - not connected Link indicator: OTA upgrade ——50 ms high-speed flashing EasyConfig, WPS configuration After the network connection ——200ms fast flash ——On (Output Low) COPYRIGHT © WIZNETCO., LTD ETDX1602191815 WIZnet Co., Ltd Idle WizFi310 SPECIFICATION V1.0 ——1S slow flash 4.4 Reference design Figure 4-4 Module Typical Design Reference COPYRIGHT © WIZNETCO., LTD ETDX1602191815 WIZnet Co., Ltd WizFi310 SPECIFICATION V1.0 5. Electrical Specification 5.1 General specification ITEMS CONTENTS Operating Frequency 2.400-2.4835GHz WiFi Standard 802.11b/g/n 11b: CCK / DSSS 11g: OFDM Modulation 11n: OFDM Host Interface UART Dimension Typical (L x W):25mm x 19mm Operation Temperature -20℃ to +55℃ Storage Temperature -55℃ to +125℃ Operation Voltage 3.3V±0.2V 5.2 802.11b Mode ITEMS CONTENTS Specification IEEE802.11b Mode DSSS/CCK Channel CH 1to CH13 1.Power Levels (calibrated) Min. Typ. Max. Unit 1)13dBm Target (For each antenna Port) 11 13 14 dBm Frequency error -25 +25 kHz 3. Minimum input level sensitivity Min. Typ. Max. Unit 1)11Mbps(FER≤8%) --- -82 --- dBm 2)Maximum input level (FER≤8%) --- -10 --- dBm Note Note COPYRIGHT © WIZNETCO., LTD ETDX1602191815 WIZnet Co., Ltd WizFi310 SPECIFICATION V1.0 5.3 802. 11g Mode ITEMS CONTENTS Specification IEEE802.11g Mode OFDM Channel CH 1to CH13 1.Power Levels (calibrated) Min. Typ. Max. Unit 10 11 12 dBm Min. Typ. Max. Unit 1)54Mbps --- -30 -28 dB 3.Frequency error -25 +25 kHz 4.Minimum input level sensitivity Min. Typ. Max. Unit 1)54Mbps(PER≤10%) --- -78 --- dBm 5.Maximum input level (PER≤10%) --- -10 --- dBm 1)11dBm Target (For each antenna Note Port) 2.Constellation error(EVM)@target Note power 5.4 802. 11n HT20 Mode ITEMS CONTENTS Specification IEEE802.11n HT20@2.4GHz Mode OFDM Channel CH 1to CH13 1.Power Levels Min. Typ. Max. Unit 11 12 dBm Min. Typ. Max. Unit 1)MCS7 --- -30 -28 dB 3.Frequency error -25 +25 kHz 1)11dBm Target (For each antenna Note Port) 2.Constellation error(EVM)@target Note power COPYRIGHT © WIZNETCO., LTD ETDX1602191815 WIZnet Co., Ltd WizFi310 SPECIFICATION V1.0 4.Minimum input level sensitivity Min. Typ. Max. Unit 1)MCS7(PER≤10%) --- -76 --- dBm 5.Maximum input level (PER≤10%) --- -10 --- dBm 5.5 802. 11n HT40 Mode ITEMS CONTENTS Specification IEEE802.11n HT40@2.4GHz Mode OFDM Channel CH 1to CH9 1.Power Levels (calibrated) Min. Typ. Max. Unit 10 11 dBm Min. Typ. Max. Unit -30 -28 dB 1)10dBm Target (For each antenna Note Port) 2.Constellation error(EVM)@target Note power 1)MCS7 3.Frequency error -25 +25 kHz 4.Minimum input level sensitivity Min. Typ. Max. Unit 1)MCS7(PER≤10%) --- -74 --- dBm 5.Maximum input level (PER≤10%) --- -10 --- dBm 10 COPYRIGHT © WIZNETCO., LTD ETDX1602191815 WIZnet Co., Ltd WizFi310 SPECIFICATION V1.0 6. Order information 6.1 Order part number Table 6-1:Order model Product WizFi310MA-XXXX WizFi310MB-XXXX WizFi310MC-XXXX Antenna Describe UART interface module, with on-board antenna On-board External, with external antenna U.fl/i.PEX with RF output interface Evaluation Board UART interface module, UART interface module, MOQ(PCS RF output 400 400 WizFi310-EVB 400 6.2 Module size Packaging: Hard plastic pallets Weight: <= 3 g/pcs Table 6-2: Thickness (Height) WizFi310 Thickness (Height) With Shield 3.15±0.15mm Note: In considering height design of the product, please consider your motherboard thickness error and product fit gap (recommended 0.10-0.15mm). 11 COPYRIGHT © WIZNETCO., LTD ETDX1602191815 WIZnet Co., Ltd WizFi310 SPECIFICATION V1.0 7. Contact information Korea FAE mailbox: main8096@wiznet.co.kr Tel:+82-31-8023-5679 Fax:+82-31-8022-8090 Address: 5F Humax Village, 216 Hwangsaeul-ro, Bundang-Gu,Seongnam-Si, Gyeonggi-Do, Korea 8.Modification records Edition V1.0 Author LucidMinsu Jeun Date Modification content 2015/12/4 Creating document FCC Caution Any Changes or modifications not expressly approved by the party responsible for compliance could void the userʹs authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module The final end product must be labeled in a visible area with the following” Contains FCC ID:2AKKWWIZFI310. 12 COPYRIGHT © WIZNETCO., LTD ETDX1602191815
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:20fb10e8-a311-11f2-0000-02c7314339d4 Producer : GPL Ghostscript 9.18 Modify Date : 2017:07:17 13:33:55Z Create Date : 2017:07:17 13:33:55Z Creator Tool : UnknownApplication Document ID : uuid:20fb10e8-a311-11f2-0000-02c7314339d4 Format : application/pdf Title : UntitledEXIF Metadata provided by EXIF.tools