WOOSIM SYSTEMS PORTI-P340 Thermal Printer User Manual P340
Woosim System Inc. Thermal Printer P340
Users Manual
MODEL PORTI-P340 WOOSIM SYSTEMS Inc. #501, Daerung Technotown 3th, 448, Gasan-Dong, GeumChun-Ku, Seoul, Korea Tel : +82-2-2107-3700 Fax : +82-2-2107-3707 URL: http://www.woosim.com All specifications are subjected to change without notice Copyright PORTI-P340 THERMAL PRINTER operator’s manual. Copyright ⓒ2007 by Woosim Systems Inc. All rights reserved. The information contained in this manual is the property of Woosim Systems Inc. And may not be reproduced in whole or in part without the prior written permission of Woosim System Inc. Trademark a registered trademark of Woosim Systems Inc. All other trademark are the properties of their respective companies. Caution Some semiconductor devices are easily damaged by static electricity. You should turn the printer “OFF”, before you connect or removed the cable on the rear side, in order to guard the printer against the static electricity. If the printer is damaged by the static electricity, you should turn the printer “OFF” Notice The contents of this manual are subject to change without notice. "Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment." All specifications are subjected to change without notice http://www.woosim.com 2007-10-26 Introduction The PORTI-P340 is an extremely simple and functional thermal printer. It is the ideal solution for applications which require the immediate printing of data on a paper, whether they be of an industrial,professional or laboratory nature. Medical analyzer, Industrial instrument, Recorder, Geological analyzer, Underground analyzer, Chemical analyzer, Metallic analyzer, etc. The general features of PORTI-P340 printer are as follows: X Ultra small size rack mount printer. X Very silent printing thru direct thermal printing method. X High speed(40mm/sec) X UART interface X Support text and graphic printing. X Support bit-image(logo) download. X Easier paper loading by CLAMSHELL design. X Easier maintenance with self-diagnostics. X Flow control : Software (XON/XOFF) ※ Hardware flow control not supported in printer. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 the FCC Rules. These limits are designed to provide reasonable protection against farmful interference in a residential installation. Thes equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfrernce to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause farmful interference to radio or television reception , which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the reciver is connected. --Consult the dealer or an experienced radio/TV technician for help. http://www.woosim.com 2007-10-26 Operating Precautions Please follow the precautions below to enjoy and maintain the full performance of the printer. X Using the Printer ● Be careful not to drop or bump the printer on a hard surface. ● Do not install the printer in direct sunlight or such areas. Suitable environment for the use of the printer is as follows : ◆ Operating temperature : -10°C to 40 °C ◆ Relative humidity ● : 10% to 90% (no condensation) Do not install the printer near devices that generate strong electromagnetic fields such as a copy machine. ● Do not remove or reinstall the communication cable during printing or transmission. http://www.woosim.com 2007-10-26 CONTENTS 1. Outline ............................................................................................................................................6 1.1. Model classifications .................................................................................................................6 1.2. Product Part Number System.....................................................................................................6 1.3. Specifications ............................................................................................................................7 2. Setting up the printer ....................................................................................................................8 2.1. Printer & Accessories ................................................................................................................8 2.2. Printer Features..........................................................................................................................9 2.3. Installation ...............................................................................................................................10 2.4. Replacing paper roll.................................................................................................................11 2.5. Set operation mode ..................................................................................................................12 2.6. Specified power supply ...........................................................................................................15 3. Interface........................................................................................................................................16 3.1. UART ......................................................................................................................................16 4. Using the printer ..........................................................................................................................17 4.1. Control panel ...........................................................................................................................17 4.2. The self test..............................................................................................................................18 5. Consumable Parts........................................................................................................................19 5.1. Recommended paper ...............................................................................................................19 5.2 Printing position .......................................................................................................................19 http://www.woosim.com 2007-10-26 1. Outline 1.1. Model classifications PORTI–P340 Model name Interface None : UART Power None : DC 9V 1.2. Product Part Number System Model name 2. PORTI-SC30 Interface Spec. Wired S40 SC30 W25 Example) 1. PORTI-S40 Serial/Bluetooth Wireless RS-232C Bluetooth TTL IrDA USB HPIR RS-485 None Parallel None Part No. ⇒ S40/A1 Bluetooth Only Part No. ⇒ SC30/Z1 http://www.woosim.com 2007-10-26 1.3. Specifications Item Specification Print method Direct thermal line printing Characters per line 64cpl (MAX) Character size Eng. : 9×24dots, 12×24dots Resolution 203dpi, 8dots/mm Print width 3-inch (72mm, 576dots) Print speed 40mm/sec Dimension 110 × 77.7 × 48 mm Weight 300g (including paper roll) Interface UART Paper roll Thermal paper roll (80mm wide, 38ø) Kor. : 16×24dots, [24×24dots] PDF417(2-dimension), Code128, Code39, I2/5, Code93 Barcodes Receive buffer size UPC, EAN(KAN, JAN), CODABAR 10K bytes Printing speed may be slower, depending on the data Note Input Power transmission speed and the combination of control commands. 9VDC, Standby 60mA and Max 3A Temperature Environment conditions MCBF (Mean Cycle Between failure) Humidity Mechanical Head -10°C ~ 40°C (operating) -10°C ~ 70°C (storage) 30% - 80% (operating) 10% - 90% (storage) 37,000,000 lines Approximately 50 Km http://www.woosim.com 2007-10-26 2. Setting up the printer 2.1. Printer & Accessories When unpacking your printer box make sure it contains the printer and all accessories. If any accessories are missing or damage, please contact your dealer for assistance. Roll paper PORTI-P340 http://www.woosim.com 2007-10-26 2.2. Printer Features http://www.woosim.com 2007-10-26 2.3. Installation http://www.woosim.com 2007-10-26 10 2.4. Replacing paper roll Note : Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly. 1. Make sure that the printer is not receiving data; otherwise, data may be lost. 2. Open the paper roll cover using your finger on both side of printer and remove the remaining paper. 3. Insert a new paper roll as shown. 4. Tear the excess paper off using the edge of paper door as a tear bar. http://www.woosim.com 2007-10-26 11 2.5. Set operation mode 1. Press the Mode Button until the Error Lamp twinkles 5 times 2. Change the mode and option using the Mode Button and the Feed Button according to the MODE code(Table1) z Feed button : use for changing MODE status z Mode button : use for changing OPTION status [Example] The defaults of the printer are:RS-232C/9600 BPS/8 DATA BIT/NO PARITY/ DENSITY LOW If a user wants to modify the defaults with RS-232C / 38400 BPS/7 DATA BIT/ EVEN PARITY / DENSITY HIGH Press the Mode Button until the Error Lamp twinkles 5 times and release the button. → You will see the Power Lamp twinkles one time and the Error Lamp twinkles 1 time. → This mode is RS-232C mode. Press the Feed button one time, the Power Lamp twinkles twice and the Error Lamp winkles 4 times. → Press the Mode Button one time, the Error Lamp twinkles 5 times and press the Mode Button one more time, the Error Lamp twinkles 6 times. (The baud rate has set to 38,400 bps) Press the Feed Button one time, the Power Lamp twinkles 3 times and the Error Lamp twinkles 2 times. → Press the Mode Button one time, the Error Lamp twinkles one time. (The Data Bit has set to 7 data bit.) Press the Feed Button one time, the Power Lamp twinkles 4 times and the Error Lamp twinkles 1 time. http://www.woosim.com 2007-10-26 12 → Press the Mode Button one time, the Error Lamp twinkles 2 times. (The Parity bit has set to even parity bit.) Press the Feed Button one time, the Power Lamp twinkles 5 times and the Error Lamp twinkles 1 time. → Press the Mode Button one time, the Error Lamp twinkles 2 times after then press the Mode Button again, the Error Lamp will twinkle 3 times (The density has set to High) If all mode have set, press the Mode Button and the Feed button at the same time after then release the buttons at the same time. The printer will print out the mode status which has modified. (RS-232C/ 38,400 BPS/ 7 DATA BIT/ EVEN PARITY/ DENSITY HIGH) If the status is not correct, please try it again according to the procedure. http://www.woosim.com 2007-10-26 13 MODE Communication Port Baud Rate Data Bit Parity Bit Stop Bit Density Mark Sensor POWER Lamp ERROR Lamp (Green) (Red) Option UART Protocol UART 9600 bps 19200 bps 38400 bps 57600 bps 115200 bps 7 Data bit 8 Data bit No Parity Even Parity Odd Parity 1 Stop Bit 2 Stop Bit Density Low Density Medium Density High No use Use Low Medium1 Medium2 High TABLE 1 http://www.woosim.com 2007-10-26 14 2.6. Specified power supply The following specifications are requested for power supply. Input : DC 9V / Max 3A Avoid using power supply which its power capacity of power current is extremely high. http://www.woosim.com 2007-10-26 15 3. Interface 3.1. UART The PORTI-P340 printer has UART interface and power connector is connected by 6 pin female connector. In the following table, the signals present on the connector are listed: Pin no. Signal name Direction Function INPUT TxD Output Transmit Data RxD Input Receive Data N.C N.C GND 9VDC/3A GroundApplicable connector : MOLEX 5264-06P or equivalent. WARNING A wrong connection of power supply connector could be damage the printer. http://www.woosim.com 2007-10-26 16 4. Using the printer 4.1. Control panel X Button - FEED : When the printer is on, paper can be feed manually by pressing and holding the FEED button for more than one second. - MODE : MODE Button is for use to change communication mode. Do not operate the mode button without instructions. X Panel lamp - Power(Green) : Printer is ON and ready to receive data. - Error (Red) : Indicates a fault condition or a printer error. (i.e : no paper, paper cover opened. etc.) http://www.woosim.com 2007-10-26 17 4.2. The self test The Self-Test checks whether the printer has any problems. If the printer does not function properly, contact your dealer. For Self-Test, turn on the power while holding down the FEED Button. The Self-Test checks the following : 1) Make sure paper roll has been installed properly. 2) The Self-Test prints the current printer status, which provides the control ROM version and the communication method setting. 3) After printing the current printer status, Self-Test will print a pattern using the built-in character set. 4) The Self-Test automatically ends. The printer is ready to receive data as soon as it complete the Self-Test. http://www.woosim.com 2007-10-26 18 5. Consumable Parts 5.1. Recommended paper Type : Thermal Paper Paper width : 80mm Paper thickness : 60±5㎛ Outer diameter : Ø38mm or less Recording side : Outside of roll Cautions 1. Do not paste the paper to the core. And the roll paper which has near end mark printing on its near end is recommended. 2. Chemicals or oil may change the color of paper, or printed characters may fade. 3. Change of paper color starts from approx . 70℃. Pay attention to heat, humidity and sun light. 4. Color of paper may be changed by being scratched by nail or hard metal, etc. 5.2 Printing position http://www.woosim.com 2007-10-26 19
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2007:11:12 14:56:33+09:00 Create Date : 2007:10:26 10:41:46+09:00 Metadata Date : 2007:11:12 14:56:33+09:00 Format : application/pdf Title : Microsoft Word - P340 매뉴얼.doc Creator :EXIF Metadata provided by EXIF.toolsDocument ID : uuid:a27e6985-ebe6-4d89-938b-126bbe7a3e38 Instance ID : uuid:0094732b-fe8b-4178-a62a-a175520d4cf0 Page Count : 19 Author :