WOOSIM SYSTEMS WSP-R240 Thermal Printer User Manual

Woosim System Inc. Thermal Printer Users Manual

Users Manual

http://www.woosim.com MODEL WSP-R240 WOOSIM SYSTEMS Inc. #501, Daerung Technotown 3th, 448, Gasan-Dong, GeumChun-Ku, Seoul, Korea Tel : +82-2-2107-3700 Fax : +82-2-2107-3707 URL: http://www.woosim.com (2inch Mobile Printer) Rev. 2.0 All specifications are subjected to change without notice
WSP-R240 Rev. 2.0 http://www.woosim.com 2  Copyright WSP-R240 2inch mobile printer operator’s manual. Copyright ⓒ2011 by Woosim Systems Inc. All rights reserved. The information contained in this manual is the property of Woosim Systems Inc. And may not be reproduced in whole or in part without the prior written permission of Woosim Systems Inc.  Trademark a registered trademark of Woosim Systems Inc. All other trademark are the properties of their respective companies.  Caution Some semiconductor devices are easily damaged by static electricity. You should turn the printer “OFF”, before you connect or removed the cable on the rear side, in order to guard the printer against the static electricity. If the printer is damaged by the static electricity, you should turn the printer “OFF”.  Notice The contents of this manual are subject to change without notice.
WSP-R240 Rev. 2.0 http://www.woosim.com 3  Introduction The WSP-R240 is suitable designed for use with a growing variety of mobile devices. Bluetooth/Serial interfaces make the WSP-R240 the perfect comrade for applications such as point of transaction warehousing, distribution, point of sales, hospitality, gaming and healthcare. The general features of WSP-R240 printer are as follows:  Pocket size (79.5 X 114.3 X 43.6mm)  Light weight (217g) for true mobility.  Very silent printing thru direct thermal printing method.  High speed(80mm/sec, MAX)  High resolution(203dpi : 8dots/mm)  UART(RS-232C or TTL), Bluetooth Ver 2.1 + EDR USB [option] Interface  Intuitive LED’s indicate Power(on/off),Error, Bluetooth status, Battery status  Support Magnetic Stripe Reader [option].  Support text and graphic printing.  Easier paper loading by CLAMSHELL design.  Easier maintenance with self-diagnostics.  In field programming – Update Firmware, Download Fonts and Logos  Microsoft Windows XP / VISTA / 7 / CE / Linux / Android compatible.  Free fall: 1.5 meter onto concrete  Flow control : Software (XON/XOFF) ※ Hardware flow control not supported in printer.
WSP-R240 Rev. 2.0 http://www.woosim.com 4  Operating Precautions Please follow the precautions below to enjoy and maintain the full performance of the printer.  Using the Printer ● Be careful not to drop or bump the printer on a hard surface. ● Do not install the printer in direct sunlight or such areas. Suitable environment for the use of the printer is as follows: ◆ Operating temperature :-10°C to 50°C ◆ Relative humidity : 30% to 80% ● Do not install the printer near devices that generate strong electromagnetic fields such as a copy machine. ● Do not open the platen cover during printing . ● Do not remove or reinstall the communication cable during printing or transmission. ● Do not touch the connectors of the communication during printing. ● Switch the POWER OFF when not in use. ● Do not use alcohol or other solvent. ● The AC adapter, the battery charger and the battery pack may become warm when in use. This is normal and is not a malfunction. ● When the battery pack is used at low temperature, the length of time the printer can be used may be shortened.  Thermal Paper Handling ● Store the thermal paper in a cool, dry and dark place. ● Do not rub the paper with hard object. ● Do not leave the paper with hard object. ● Do not allow plastic film, erasers, or adhesive tape to touch the paper for long periods. ● Do not stack the thermal paper with diazo copies immediately after copying or wet-type copies. ● Do not use chemical glue. ● Always use the clean thermal paper.
WSP-R240 Rev. 2.0 http://www.woosim.com 5 Note FCC ID : QDDWSP-R240 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void the user’s authority to operated the equipment under FCC rules. This Device has been evaluated to comply with RF exposure requirement for general use limit in portable condition. It is safe to be used in sold condition.
WSP-R240 Rev. 2.0 http://www.woosim.com 6CONTENTS 1. Outline ..........................................................................................................................................7 1.1. Model classifications..........................................................................................................7 1.2. Product Part Number System...........................................................................................7 1.3. Specifications.......................................................................................................................8 2. Setting up the printer.............................................................................................................10 2.1. Printer & Accessories.......................................................................................................10 2.2. Printer Features.................................................................................................................11 2.3. Replacing the paper roll..................................................................................................13 2.4. Power supply .....................................................................................................................14 2.4.1. Internal power supply.............................................................................................14 2.4.2. Installing the Battery ..............................................................................................14 2.4.3. Recharging the battery ..........................................................................................15 2.5. Set operation mode.........................................................................................................16 3. Interface......................................................................................................................................20 3.1. UART(RS-232C or TTL) or USB .......................................................................................20 3.2. Bluetooth............................................................................................................................21 3.3. Card Reading.....................................................................................................................21 4. Using the printer......................................................................................................................22 4.1. Control panel.....................................................................................................................22 4.2. The self test .......................................................................................................................23 5. Consumable Parts ....................................................................................................................24 5.1. Recommended paper ......................................................................................................24 5.2. Printing position ...............................................................................................................24 6. Revision History .......................................................................................................................25
WSP-R240 Rev. 2.0 http://www.woosim.com 711.. OOuuttlliinnee 11..11.. MMooddeell ccllaassssiiffiiccaattiioonnss 11..22.. PPrroodduucctt PPaarrtt NNuummbbeerr SSyysstteemm WSP-R240 ( ) ( ) Model Interface A1:UART/Bluetooth Power None : DC 8.4V Model name / Interface Spec. Example) 1. Porti-S40 UART/Bluetooth Part No. ⇒ S40/A1 2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1 Note) The above table is the interface format which is supported. But some of the interfaces are not supported according to the product and please contact us, if you have any questions regarding the interface. S40 SC30 W25 . . .Wired Wireless A RS-232C 1 Bluetooth B TTL 2 IrDA C USB 0 None D RS-485 E Parallel Z None
WSP-R240 Rev. 2.0 http://www.woosim.com 811..33.. SSppeecciiffiiccaattiioonnss.. Item Specification Printing method Direct thermal line printing Characters per line 42cpl (MAX) Character size Eng. : 9*24dots, 12*24dots Kor. : 16*24dots, [24*24dots] Optional Characters Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Turkish, Greek, Japanese, Persian, Latin9 and Others upon request. Resolution 203dpi, 8dots/mm Print width 2-inch (48mm, 384dots) Printing speed 80mm / sec (MAX) Dimensions 79.5 X 114.3 X 43.6mm (Standard) 79.5 X 118.2 X 43.6mm (MSR option) Weight 217g (Including battery) Interface UART(RS-232C or TTL) , Bluetooth Ver2.1 + EDR USB[option] Paper supplied Thermal roll paper, Label roll (58mm wide, 40ø) Barcode supplied 1-dimension : Code128, Code39, I2/5, Code93 UPC, EAN, KAN,JAN, CODABAR 2-dimension : PDF417, QR Code, DATA Matrix, Micro PDF417, Truncated PDF417 Driver Microsoft Widows XP / VISTA / 7 Windows CE, Linux, Android OS driver compatible Black mark Support black mark detection H/W spec. MCU : 32bits CISC, FLASH : 64Mbits, RAM : 128Mbits Receive buffer size 1M bytes MSR [option] ISO 7810 / 7811 / 7812 Triple tracks(1&2&3) Reading Battery Rechargeable 7.4V DC , 1100mAh (Li-ion) Battery duration 1 hour continuous printing Battery Charger Input (100~250V AC 50~60Hz) Output(8.4VDC/0.8A), 4hours full charge time (Continue…)
WSP-R240 Rev. 2.0 http://www.woosim.com 9 Item Specification Temperature -10°C ~ 50°C (operating) -10°C ~ 70°C (storage) Environment Conditions Humidity 30% - 80% (operating) 10% - 90% (storage) Mechanical 37,000,000 lines MCBF (Mean Cycle Between failure) Head Approximately 50 Km < Table 1 >
WSP-R240 Rev. 2.0 http://www.woosim.com 1022.. SSeettttiinngg uupp tthhee pprriinntteerr 22..11.. PPrriinntteerr && AAcccceessssoorriieess Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. Battery charger adaptor ▼ OPTIONAL Car charger Thermal roll paperWSP-R240 Communication cable Battery Pack MSR External Battery Cradle
WSP-R240 Rev. 2.0 http://www.woosim.com 1122..22.. PPrriinntteerr FFeeaattuurreess ▶ Part Name
WSP-R240 Rev. 2.0 http://www.woosim.com 12 ▶ Dimensions
WSP-R240 Rev. 2.0 http://www.woosim.com 1322..33.. RReeppllaacciinngg tthhee ppaappeerr rroollll 1. Make sure that the printer is not receiving data; otherwise, data may be lost. 2. Open the paper cover as the “One-Touch” way by pressing the button in the arrow direction like the picture. 3. Insert the paper roll as shown. 4. Tear the excess paper off using the edge of paper door as a tear bar. Note : Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer can not detect the paper end correctly.
WSP-R240 Rev. 2.0 http://www.woosim.com 1422..44.. PPoowweerr ssuuppppllyy 22..44..11.. IInntteerrnnaall ppoowweerr ssuuppppllyy The following specification is requested for Power supply. Battery Charger : DC 8.4V/0.8A Avoid using power supply which its power capacity of power current is extremely high. 22..44..22.. IInnssttaalllliinngg tthhee BBaatttteerryy ① To install battery pack, proceed as follows: -Insert the Battery Connector in the direction of the arrow. ② To remove battery pack, proceed the above order reverse. ③ The battery pack install into External Battery Cradle. - Insert the battery pack in the direction of the arrow. NOTE : ● Before installing or removing the battery pack, ensure the printer is OFF. ● If the printer is not used for long period of time, remove the battery pack from the printer.
WSP-R240 Rev. 2.0 http://www.woosim.com 1522..44..33.. RReecchhaarrggiinngg tthhee bbaatttteerryy For recharging the battery pack, install the battery pack in the printer. Insert the Battery Charger or External Battery Cradle to the charge connector of the printer. NOTE : ● While charging the printer, turn off the printer power. ● Do not remove the battery during charging. ● The battery is consumable parts and when purchasing, compared to the use hour is gradually decreases. (Warranty 6 month) ● If the printer is not used for a long time, unplug the power cord from the printer and outlet. ● The recharging time depends on the voltage level and ambient temperature of the battery. Normally, if takes about 4 to 5 hours to recharge a battery pack. ● You must use only the supplied adapter. ● Red Lamp : charging the battery. Green Lamp: charging is finished.
WSP-R240 Rev. 2.0 http://www.woosim.com 1622..55.. SSeett ooppeerraattiioonn mmooddee In keeping on pressing the Feed and Power button simultaneously until after the ERROR lamp blinks 5 times, the printer comes out at the circumstance to change the printer mode. (refer Table 2)  POWER button : use for changing OPTION status. (Error Lamp)  FEED button : use for changing MODE status. (Power Lamp) [Example] The defaults of the printer are : RS-232C / 9600 bps / 8 data bit / No parity / 1 stop bit / Density low / Mark use / Sensor low / Power down 5 minute If a user wants to modify the defaults with Bluetooth / 57600 bps / 7 data bit / Odd parity / 2 stop bit / Density high / Mark no use / Sensor medium1 / Power down no use  Press MODE & POWER Button during the Error Lamp flickers 5 times.  You will see the Power Lamp and the Error Lamp flickers once.  Press the POWER Button twice and the Error Lamp flickers 3 times. And then, interface mode has set to Bluetooth mode.  When you press POWER button once again, Power Lamp flickers twice and the Error Lamp flickers once.  Press POWER Button 3 times, Error Lamp flickers 4 times. And then, baudrate has set to 57,600 bps.  When you press POWER Button once again, Power Lamp flickers 3 times and the Error Lamp flickers twice.  Press POWER Button once, Error Lamp flickers once. And then Data Bit has set to 7 data bit.  When you press FEED Button once again, Power Lamp flickers 4 times and the Error Lamp flickers once.  Press POWER Button once, Error Lamp flickers twice. And then the Parity bit has set to Odd parity bit.
WSP-R240 Rev. 2.0 http://www.woosim.com 17  When you press FEED Button once again, Power Lamp flickers 5 times and Error Lamp flickers once.  Press POWER Button once, Error Lamp flickers twice. And then the density has set to 2 stop bit.  When you press FEED Button once again, Power Lamp flickers 6 times and Error Lamp flickers once.  Press POWER Button twice, Error Lamp flickers 3 times. And then the density has set to Density high.  When you press FEED Button once again, Power Lamp flickers 7 times and Error Lamp flickers twice.  Press POWER Button once, Error Lamp flickers once And then the mark has set to Mark no use.  When you press FEED Button once again, Power Lamp flickers 8 times and Error Lamp flickers once.  Press POWER Button once, Error Lamp flickers twice And then the sensor has set to Sensor medium1.  When you press FEED Button once again, Power Lamp flickers 9 times and Error Lamp flickers five times.  Press POWER Button once, Error Lamp flickers once And then the power down has set to Power down no use. If all the mode have set, press the POWER Button and the FEED Button at the same time after then release the buttons at the same time. The printer will print out the mode status which has modified. (Bluetooth / 57600 bps / 7 data bit / Odd parity / 2 stop bit / Density high / Mark no use / Sensor medium1 / Power down no use) If the status is not correct, please try it again according to the procedure.
WSP-R240 Rev. 2.0 http://www.woosim.com 18 MODE POWER Lamp (Green) ERROR Lamp (Red) Option 1 UART(RS-232C) 2 Protocol UART(RS-232C) 3 Bluetooth CommunicationPort 1 4 Protocol Bluetooth 1 9600 bps 2 19200 bps 3 38400 bps 4 57600 bps Baud Rate 2 5 115200 bps 1 7 Data bit Data Bit 3 2 8 Data bit 1 No Parity 2 Odd Parity Parity 4 3 Even Parity 1 1 stop bit Stop bit 5 2 2 stop bit 1 Density Low 2 Density Medium Density 6 3 Density High 1 No use Mark 7 2 Use 1 Low 2 Medium1 3 Medium2 4 High Sensor 8 5 AUTO (Continue…)
WSP-R240 Rev. 2.0 http://www.woosim.com 19 MODE POWER Lamp (Green) ERROR Lamp (Red) Option 1 No use 2 1 minute 3 2 minute 4 3 minute 5 4 minute Power Down 9 6 5 minute < Table 2 >
WSP-R240 Rev. 2.0 http://www.woosim.com 2033.. IInntteerrffaaccee 33..11.. UUAARRTT((RRSS--223322CC oorr TTTTLL)) oorr UUSSBB The WSP-R240 printer has a UART(RS-232C or TTL) or USB interface and is connected by means of a 5 pin mini USB socket. In the following table, the signals present on the Mini- USB socket are listed: Pin no Signal Name Direction Function 1 TxD Output Transmit Data2 RxD Input Receive Data3 CTS - - 4 NC. - - 5 GND - Ground ① UART(RS-232C) ② USB NOTE : ● When data receiving, when it removes the communication cable, it loses a data. (Fig.3.1) Pin no Signal Name 1 VCC 2 DATA “+” 3 DATA “-” 4 - 5 GND
WSP-R240 Rev. 2.0 http://www.woosim.com 2133..22.. BBlluueettooootthh 33..33.. CCaarrdd RReeaaddiinngg Category Specification Bluetooth Spec. Bluetooth Ver2.1 +EDR / Class2 (10m) Frequency Range 2.4GHz ISM BAND (2 402 ~ 2 480 MHz) RF POWER Below 10 dBm Modulation method GFSK, PSK Data Transmission Rate 57600bps Fixed. Data bit 8 Data bit Fixed. Parity bit No parity Fixed. Stop bit 1 Stop bit Fixed. Please take notice that Magnetic Stripe Card should be swapped in direction of arrow. Card can be read in both
WSP-R240 Rev. 2.0 http://www.woosim.com 2244.. UUssiinngg tthhee pprriinntteerr 44..11.. CCoonnttrrooll ppaanneell  Button - FEED Button: When the printer is on, paper can be feed manually by pressing and holding the FEED button for more than one second. - POWER Button: ① When of 5 or more seconds presses and power comes to on or off. ② After pressing the POWER and the FEED button simultaneously, if the ERROR lamp 5 turn signals POWER button is converted with MODE functions. : In keeping on pressing the Feed and Power button simultaneously until after the ERROR lamp blinks 5 times, the printer comes out at the circumstance to change the printer mode. (Refer to 2.5. Set operation mode for details about mode conversion) (Fig.4.1)
WSP-R240 Rev. 2.0 http://www.woosim.com 23 44..22.. TThhee sseellff tteesstt The Self-Test checks whether the printer has any problems. If the printer does not function properly, contact your dealer. For Self-Test, turn on the power while holding down the FEED Button. The Self-Test checks the following : 1) Make sure paper roll has been installed properly. 2) The Self-Test prints the current printer status, which provides the control ROM version and the communication method setting. 3) After printing the current printer status, Self-Test will print a pattern using the built-in character set. 4) The Self-Test automatically ends. The printer is ready to receive data as soon as it complete the Self-Test.  Panel lamp - Power : Printer is ON and ready to receive data. (GREEN) - Error : Indicates a fault condition or a printer error. (RED) (i.e : no paper, paper cover opened. etc.) - Bluetooth : Indicates a Bluetooth connection status. (BLUE) - Battery Power : These lamps(Green) indicated the battery power remaining. (GREEN) The battery gain in quantity and these lamps are on the decrease. If so, you must recharge the battery by using the battery charger.
WSP-R240 Rev. 2.0 http://www.woosim.com 2455.. CCoonnssuummaabbllee PPaarrttss 55..11.. RReeccoommmmeennddeedd ppaappeerr 55..22.. PPrriinnttiinngg ppoossiittiioonn Type : Thermal Paper Paper width : 58mm Paper thickness : 60±5㎛ Outer diameter : Ø40mm or less Recording side : Outside of roll Cautions 1. Do not paste the paper to the core, and the roll paper which has near end mark printing on its near end is recommended. 2. Chemicals or oil may change the color of paper, or printed characters may fade. 3. Change of paper color starts from approx. 70 ℃. Pay attention to heat, humidity and sun light. 4. Color of paper may be changed by being scratched by nail or hard metal, etc.
WSP-R240 Rev. 2.0 http://www.woosim.com 2566.. RReevviissiioonn HHiissttoorryy Date Version Comments Mar. 03. 2011 1.0 Initialize May. 03. 2011 2.0 Weight Change

Navigation menu