Wacom Co STU520A LCD Signature Tablet User Manual
Wacom Co Ltd LCD Signature Tablet Users Manual
Wacom Co >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1356569 |
| Application ID | oxylA+MOG801oaLkZIC8yw== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 27.25kB (340607 bits) |
| Date Submitted | 2010-10-09 00:00:00 |
| Date Available | 2010-11-30 00:00:00 |
| Creation Date | 2010-09-28 18:56:09 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2010-09-28 18:56:09 |
| Document Title | Users Manual |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | LCDﾀﾌﾞﾚｯﾄｸﾞﾙｰﾌﾟ |
Instruction Manual LCD Signature Tablet STU-520A Ver. 1 26 Sep, 2010 WACOM Co., Ltd WACOM Co., Ltd. Table of contents 1. SCOPE ...........................................................................................................................................................2 2. SUMMARY .....................................................................................................................................................2 3. PRECAUTIONS ON USE AND HANDLING .................................................................................................2 4. OPERATION ....................................................................................................................................................4 5. NOTE ON USING THIS PRODUCT ..............................................................................................................4 5. PRODUCT SPECIFICATION...........................................................................................................................5 5-1 5-2 5-3 5-4 5-5 5-6 5-7 GENERAL SPECIFICATIONS........................................................................................................................................... 5 COMPLIANCE................................................................................................................................................................ 5 COORDINATE................................................................................................................................................................ 6 INTERFACE SPECIFICATIONS ........................................................................................................................................ 6 STATUS LED ............................................................................................................................................................... 6 LCD ............................................................................................................................................................................ 6 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 6. ACCESSORIES ..............................................................................................................................................7 6-1 ACCESSORY LIST (STU-520A).................................................................................................................................... 7 6-2 PEN SPECIFICATION..................................................................................................................................................... 8 6-3 USB CABLE(STJ-A299) .............................................................................................................................................. 9 7. FIXING STU-520A .........................................................................................................................................10 8. REPLACING THE PEN TIP .........................................................................................................................13 9. HOW TO INSTALL PEN TETHER ..............................................................................................................14 WACOM Co., Ltd. 1. Scope This instruction manual applies to the LCD Signature tablet STU-520A. 2. Summary The Wacom® STU-520A LCD signature tablet combines the benefi ts of a liquid crystaldisplay (LCD) with the control, comfort, and productivity of Wacom’s cordless, batteryfree pen technology. This gives you a direct pen-on-screen interface that leads to a truer pen-on-paper writing experience. The basic components of the LCD signature tablet include a Wacom pen tablet internally mounted behind a 4.7" diagonal TFT color LCD display, and a Wacom pen. The LCD signature tablet is equipped with a USB interfaces. 3. Precautions on use and handling Be sure to follow all instructions, cautions, and warnings found within this guide. Failure to do so could cause the loss of data or damage to your computer. Failure to do so could also void your warranty, in which case Wacom shall have no responsibility to repair or replace the product. WARNING Do not use the STU-520A LCD signature tablet in a facility control system that requires extremely high reliability; it may cause other electronic devices to malfunction, or other devices may cause the LCD signature tablet to malfunction. Where use is prohibited, power off the STU-520A to prevent the possibility of it causing other electronic devices to malfunction. Wacom does not accept any liability for direct or consequential damages. High Voltage. Do not open or disassemble the STU-520A LCD signature tablet. There is a risk of electrical shock when the casing is open. This will also void your warranty and Wacom shall have no responsibility to repair or replace the product. If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking from it; this liquid is an irritant. In case of contact with skin, eyes, or mouth, rinse immediately with running water for at least 15 minutes or more. If contact is made with the eyes or mouth, also consult a physician. Prevent children from swallowing the pen tip. The pen tip may accidentally be pulled out if children are biting on them. CAUTION Do not use or store the LCD signature tablet where: • Temperature changes are severe or exceed specifi cations (e.g., outdoors or inside a vehicle). • The LCD signature tablet and pen are exposed to direct sunlight or heat from an appliance, or are exposed to water or any other kind of liquid. Do not use the LCD signature tablet in a dusty environment; this may damage the unit. Do not disassemble the pen. This may cause the device to malfunction. In this case, Wacom shall have no responsibility to repair or replace the product. Do not scratch the display screen. Avoid placing sharp objects on the display screen surface. Avoid intensive shock or vibration to the STU-520A or the pen. Hitting or dropping the LCD signature WACOM Co., Ltd. tablet may damage the display screen or other components. Do not put heavy articles on the LCD signature tablet or push against it with a strong force; This may damage the display screen. Do not place heavy articles on the STU-520A cabling, repeatedly bend the cables sharply, or apply heavy stress to the cable connectors; this may damage the unit or cabling. If the pen tip becomes sharp or angular, it may damage the coating on the display screen. Please replace the pen tip if necessary. Do not expose the STU-520A to high voltage electrostatic discharges or to a buildup of an electrostatic charge on the LCD screen. This may result in a temporary blotching of the LCD monitor. If blotching occurs, leave the STU-520A’s display on and the blotching should disappear within a few hours. Wacom LCD signature tablet products comply with the European Union RoHS Directive 2002/95/EC (RoHS Directive). Federal Communications Commission (FCC) notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. You can determine whether the equipment is causing interference by powering it off. If the interference stops, it was probably caused by the equipment. If the equipment does cause interference to radio or television reception, you may be able to correct the interference by using one or more of the following measures: • Rotate the television or radio antenna until the interference stops. • Move the equipment farther away from the television or radio. • Plug the equipment and computer into an outlet that is on a different circuit from the television or radio. If necessary, consult your Wacom dealer or an experienced radio/television technician for help. Changes or modifications to this product not authorized by Wacom could void the FCC Certification and negate your authority to operate the product. INDUSTRY CANADA (CANADA ONLY) Industry Canada, Class B “This Class (B) digital apparatus complies with Canadian ICES-003” WACOM Co., Ltd. “Cet appareil numérique de la classe (B) est conforme à la norme NMB-003 du Canada.” Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. RF exposure compliance 1) To comply with FCC/IC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. 2) This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 4. Operation Connecting the tablet The STU-520A can be connected to a host computer via a USB cable. Consult your Wacom Signature Solution Partner for the STU-520A and host computer connection. Software / Driver Wacom does not provide any driver or application software for the STU-520A. Any application needed to connect and run the STU-520A as a signature capturing device must be delivered by a third party. 5. Note on using this product Replacing the pen tip For replacement of the pen tips please contact your Wacom Signature Solution Partner. The spare part number for the pen nibs is PSI-A007. Note on use When LCD panel is operated continuously for long period, a trace of electric charge remains near the electrode inside the LCD, and residual or “ghost” image of the previous image may be observed (Image persistence). To avoid image persistence, Wacom recommends the use of a moving screen saver when the screen is turned on but idle. Caring for your LCD signature tablet Keep the pen and LCD screen surface clean. Dust and dirt particles can stick to the pen and cause wear to the display screen surface. Regular cleaning will help prolong the life of your LCD screen surface and pen. Keep the tablet and pen in a clean, dry place and avoid extremes in temperature. Room temperature is best. The STU-520A and pen are not made to come apart. Taking apart the product will void your warranty. WACOM Co., Ltd. 5. Product specification 5-1 General Specifications Main body exterior color Size Mass Pen holder Main body fixation Status display Power Supply Voltage Black 160.0mm(W) X 177.3mm(D) X 15.5mm(H) 300g Tray and penholder hole Bottom fixation hole LED +5V DC Power Consumption 2.5 W Max Externals drawing 5-2 Compliance VCCI Class B FCC (Part 15 Subpart B Class B, Part 15 Subpart C) IC CE (EN55024, EN55022 CLASS B, EN61000-3-2, EN61000-3-3) C-tick KCC BSMI RoHS WACOM Co., Ltd. 5-3 Coordinate Coordinate Specifications Technology Active Area Maximum Coordinate Resolution Coordinate Accuracy Accuracy Assurance Height Reading Height Tilt range *1) Pen pressure Maximum Report Rate *2) Electro-magnetic resonance technology 103.92 x 60.48 mm (X)10400 (Y)6048 0.01mm(2540ppi) ±0.5mm（tilted ±50°from vertical） 0mm(Height from the protective plate) 5mm or more(Height from the protective plate) ±50 degrees (from vertical) 512 level 200 points/sec *1) The pen held in the center of the active area. *2) The report rate may be lower depending on the application or the operating system of the computer. 5-4 Interface Specifications (1) USB Communication Method USB Revision2.0 Full-Speed USB miniB Type connector Pin Signal Assignment VBUS DD+ GND 5-5 Status LED Status(blue) The pen was found, and the penpoint was pushed. 5-6 LCD Type Color TFT Pixels 800 × 480 dot Pixel Pitch 0.1299 x 0.126 mm Display Size 103.92 x 60.48 mm Viewing Angle 160 degree (H) 130 degree (V) Contrast Ratio (White/Black) 570 typ WACOM Co., Ltd. 5-7 Environmental Conditions Ambient Temperature Relative Humidity Operation +5C ~ +35C Storage -10C ~ +60C Operation 20 ~80%(noncondensing) Storage 20 ~90%(noncondensing) 6. Accessories 6-1 Accessory List (STU-520A) Parts number QTY USB cable(1.5m) STJ-A299 1 pcs Manual PRN-A769 1 pcs Pen UP-610-88A-1 1 pcs Pen tether PKB-A038 1 pcs WACOM Co., Ltd. 6-2 Pen Specification NAME MODEL NUMBER REMARK Main body UP-610-88A-1 Electronic pen Physical dimensions Φ9×140.5 mm Weight 11 g Color Black Rear case Front case Tip Material Color Material Color Material Color ABS Black ABS Black POM White WACOM Co., Ltd. 6-3 USB cable(STJ-A299) NAME MODEL NUMBER Length color TYPE USB Cable STJ-A299 1.5m Black USB standard WACOM Co., Ltd. 7. Fixing STU-520A STU-520A can be fixed on the table etc. Please refer for fixing STU-520A. The following; wood screw is recommended for fixing. Φdk Φk Φdk: 4 ~ 5.8mm K: Less than 2mm L: 10mm is recommended (more than 10mm) Φd: 2 ~ 3mm a) Screw wood screws to the table etc. by following dimensions. Note) Screwing will be easier by pre hole for screwing. 3.5mm The table 10 WACOM Co., Ltd. Dimension of screwing (Top view) 11 WACOM Co., Ltd. b) Put STU-520A on the table and screws are match with fixation hole of STU-520A Please make sure that STU-520A isn’t lifted up or stressed. It may cause of damage of inside or case. Note) If STU-520A is stressed or tight, don’t force to fix. Please adjust height of screws again. Bottom of STU-520A b) Pull STU-520A to forward and fix. Note) If STU-520A is stressed or tight, don’t force to fix. Please adjust height of screws again. Pull to forward 12 WACOM Co., Ltd. 8. Replacing the pen tip The pen tip (nib) can wear with normal use. In the unlikely case that the nib gets too short or develops a sharp edge, you can replace it with spare nibs. To remove the old nib: To insert a new nib: Clasp it with a pair of tweezers, needle-nosed Slide it straight into the barrel of the pen. plier, or similar instrument and pull the old nib Firmly push the nib until it stops. The new nib straight out of the pen. will slide into the correct position. WARNING Prevent children from swallowing the pen tip. The pen tip (nib) may accidentally be pulled out if children are biting on them. In the unlikely case a nib becomes angular due to wear off, it may damage the coating on the STU-520A display screen. To avoid any damage, nib replacement is recommended in this case. Important: When the pen is not in use, place it in the pen tray, the pen storage compartment, or lay it flat on your desk. To maintain the sensitivity of your pen, do not store the tool in a container where it will rest on its tip. 13 WACOM Co., Ltd. 9. How to install pen tether For avoiding drop or lost the pen, using the pen tether which came with the pen is recommended. a) Thread the end of the pen tether through hole of pen top. And Thread the other end of the pen tether through a lope of opposite pen tether end. b) Thread the end of the pen tether through the pen tether hole on the back side of STU-520A. And thread the pen through the end lope of the pen tether. 14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 15 Language : ja-JP Tagged PDF : Yes Title : Ａ４図面用紙 Author : LCDﾀﾌﾞﾚｯﾄｸﾞﾙｰﾌﾟ Creator : Microsoft® Office Word 2007 Create Date : 2010:09:28 18:56:09 Modify Date : 2010:09:28 18:56:09 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools