Walker Mc 16 Hp Users Manual Parts 12012000
!! Walker-24 Walker Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection
MC (16 HP) to the manual a2e4376f-fa81-40da-9f76-66500564e6c0
2015-02-03
: Walker Walker-Mc-16-Hp-Users-Manual-476323 walker-mc-16-hp-users-manual-476323 walker pdf
Open the PDF directly: View PDF 
.
Page Count: 64
| Download | |
| Open PDF In Browser | View PDF |
ILLUSTRATED PARTS MANUAL Model MC (16 HP) (Covers Serial Numbers 01-49733 and on) TM Effective Date: 12-01-00 P/N 6000-6 Price $5.00 KEY TO ABBREVIATIONS USED IN THIS MANUAL Abbreviation What it Represents º (Dimension) .................................................................................................................................... Degrees (Angle) " (Dimension) .................................................................................................................................................... inches (-) ...................................................................................................................................................Negative (Polarity) (+).................................................................................................................................................... Positive (Polarity) AT................................................................................................................................................................ All-Terrain CCW .............................................................................................................................................. Counter-clockwise Conn. ..........................................................................................................................................................Connector CW .............................................................................................................................................................. Clockwise D ...................................................................................................................................................................Diameter DGHS...................................................................... Deck, Grass Handling System (number refers to size in inches) DML ............................................................................................... Deck, Mulching (number refers to size in inches) DSD ..................................................................................... Deck, Side Discharge (number refers to size in inches) DU ................................................................................................................................................... Garlock (Bearing) ESNA (Fastener).........................................................................................................................Nylon Insert Locknut FSC ........................................................................................................................................ Forward Speed Control GA .....................................................................................................................................................................Gauge gal. .....................................................................................................................................................................gallon GHS .......................................................................................................................................Grass Handling System GR (Fastener) ................................................................................................................................................... Grade HP ...........................................................................................................................................................Horse Power HT .......................................................................................................................................................... Heat-Treated ID ..............................................................................................................................Identification or Inside Diameter L ....................................................................................................................................................................... Length LH ..........................................................................................................Left Hand (orientated with operator on seat) LP...............................................................................................................................................................Low Profile mm (Dimension)......................................................................................................................................... millimeters MS (Fastener) .....................................................................................................................................Machine Screw NS (as part number) ...................................................................................Item is not sold by Walker Manufacturing OD................................................................................................................................................... Outside Diameter oz. ......................................................................................................................................................................ounce PFH (Fastener) ............................................................................................................................... Phillips Flat Head P/N .......................................................................................................................................................... Part Number PPH (Fastener) ............................................................................................................................... Phillips Pan Head PTH (Fastener) .............................................................................................................................Phillips Truss Head PTO.....................................................................................................................................................Power Take-Off QKS .......................................................................................................................................................... Quick Slide qt. ........................................................................................................................................................................ quart RH ....................................................................................................... Right Hand (orientated with operator on seat) SAE (Fastener) ....................................................................................................... Society of Automotive Engineers SBH (Fastener) ..................................................................................................................Socket Button Head (Bolt) SD ....................................................................................................................................................... Side Discharge SFH (Fastener) ................................................................................................................................Slotted Flat Head SHC (Fastener) ............................................................................................................................... Socket Head Cap SHL (Fastener) ................................................................................................................................... Shoulder (Bolt) SM (Fastener) .............................................................................................................................Sheet Metal (Screw) S/N ....................................................................................................................................................... Serial Number Spg.................................................................................................................................................................... Spring SQH (Fastener)...................................................................................................................................... Square Head SS (Fastener).......................................................................................................................................Stainless Steel ST (Fastener) ............................................................................................................................. Self-Tapping (Screw) Term. ..............................................................................................................................................................Terminal V...........................................................................................................................................................................Volts NOTE: In some instances, combinations of abbreviations may be used (e.g. PPHMS - Phillips Pan Head Machine Screw). Use only genuine Walker® replacement parts. Effective Date 12-01-00 ILLUSTRATED PARTS LIST Section of Mower Covered Page Section of Mower Covered Decals Electrical Components Tractor Decals.......................................................... 2 Electrical Assemblies Page (Chassis Components) .................................... 32 Body / Chassis Assemblies (Body Components)......................................... 34 (GHS 6.7 Bushel Components) ....................... 36 Body / Chassis Assembly (GHS Models)................. 4 (GHS 9.5 Bushel Components) ....................... 38 Body Assembly Electrical Connectors....................................... 40 (GHS 9.5 Bushel Models).................................. 6 (SD Models)....................................................... 8 Tractor Components Options and Kits Armrest Kit / Touch-Up Paint ................................. 42 Comfort Seat / Armrest Kit ..................................... 44 Main Component Power Transmission Suspension Seat Kit............................................... 46 (GHS Models).................................................. 10 Light Kit .................................................................. 48 (SD Models)..................................................... 12 Case-Hardened Blower Kit .................................... 50 Engine Group ......................................................... 14 No Catch Deflector Kit (6.7 Bushel) ....................... 52 Hydrostatic Ground Drive Assemblies ................... 16 No Catch Deflector Kit (9.5 Bushel) ....................... 54 Steering Control Assemblies.................................. 18 All-Terrain Tire Kit & Tire Chain Sets ..................... 56 Throttle & Choke Control Assemblies .................... 20 Parking Brake Assembly ........................................ 22 Maintenance GHS Group ............................................................ 24 GHS Powerfil® Assembly....................................... 26 Lubrication Points .................................................. 58 GHS 6.7 Bushel Catcher & Wiring Schematic ................................................... 60 Exhaust Deflector Assemblies ............................... 28 GHS 9.5 Bushel Catcher & Warranty Exhaust Deflector Assemblies ............................... 30 Limited Warranty .................................................... 61 Effective Date 12-01-00 Use only genuine Walker® replacement parts. 1 TRACTOR DECALS ITEM NO. PART NO. DESCRIPTION LOCATION NO. REQ’D. GHS NO. REQ’D SD Walker Product and Operation Decals 1 2 3 4 5 6 7 7802 5856 5803 5813-1 5801 5802-2 5800 RH Fender Made in USA Walker Manufacturing Logo Powerfil® GHS LH Fender Walker Mower (4 x 7-1/2) Body, RH near Seat Body, Spring Bracket Body 6.7 / 9.5 Bushel Catcher, Front 6.7 / 9.5 Bushel Catcher (one on each side) Body, LH near Seat Utility Bed (one on each side) 1 1 1 1 2 1 0 1 1 1 0 0 1 2 Body, LH Side Body - Underside, Center Body near Body Chute Engine 6.7 / 9.5 Bushel Catcher Mounting Frame Assembly (one on each side) 1 1 1 1 2 1 1 0 1 0 Rear Bumper Engine Hydrostatic Drives (one on each) Gear Axle Drive Assemblies (one on each) Blower Housing Universal Joint Tube Assembly Jackshaft Support 6.7 / 9.5 Bushel Catcher Removable Screen 6.7 / 9.5 Bushel Catcher Safety Latch Body Body, RH below seat 1 1 2 2 1 1 1 1 1 1 1 1 1 2 2 0 1 1 0 0 1 1 1 1 1 0 1 0 Danger Decals Warning Decals Caution Decals 8 9 10 11 12 5805 5861 5804 6810 5868 Caution, Engine Exhaust Danger, Raised Body Danger, Rotating Blower Blades Danger, Engine Exhaust Danger, Pinch Point Maintenance Decals 13 14 15 16 17 18 19 20 21 22 23 5815 5855 5810-2 5810-1 5819 6875 7827 5869 5874 6807 7809 Body Lift Important, Engine Cooling Reservoir Axle Oil Level Blower Maintenance PTO Alignment Arrow Oil Level Removable Screen Push to Release Oil Pressure Parking Brake Option Decals (applied only to units with corresponding Options installed) 24 5877 8500-8 Lights, On-Off No Catch Deflector 8500-9 No Catch Deflector, Off-On Body 6.7 / 9.5 Bushel No Catch Deflector, LH Side (Refer to 6.7 or 9.5 Bushel No Catch Deflector Kit Listing) Body, RH above fender (Refer to 6.7 Bushel No Catch Deflector Kit Listing) NOTE: All parts requiring decals are shipped with decals applied. Use only genuine Walker® replacement parts. 2 Effective Date 12-01-00 TRACTOR DECALS Effective Date 12-01-00 Use only genuine Walker® replacement parts. 3 BODY / CHASSIS ASSEMBLY (GHS MODELS) ITEM NO. PART NO. DESCRIPTION NO. REQ’D Seat Assembly 1 2 3 4 5 6 7 5103 7203 7223 7845 7846 7204 7440-5 Seat Seat Spring Plate Compression Spring (1/2 x 1) Rubber Bumper (1.375 OD x .63) Rubber Washer (3/8 ID x 1-1/4 OD x 1/8) Shoulder Bolt, Seat Mount Shock Mount (1.25 D x .75) 1 1 2 2 2 2 2 5566 5516 7516-5 5162 7517-2 PART NO. 36 5075 5070-2 5070-4 5033-2 5030-2 5031-2 5030-4 6307-1 37 Tilt Stop Strap Rear Bumper (6.7) Catcher Pivot Bushing Roller Wheel (5") Catcher Pivot Plate 1 1 2 2 2 Welded Body Dome Plug (5/16) Dome Plug (3/8) 13mm Ball Stud Gas Spring Assembly (Includes Items # 16 & 18) Spring Clip Edge Molding, Lever Opening Dome Plug (7/16) Body ID Plate 1 2 2 2 1 F002 F004 F009 F012 F013 F014 F016 F020 F026 F027 F029 F034 F040 F042 F048 F051 F059 F085 F087 F093 F113 F151 F157 F206 F227 F241 F292 F341 F342 Body Assembly 13 14 15 16 17 6100-7 5989-3 5989-4 7146 5145 18 19 20 21 7147 5180 5989-5 NS 2 2 1 1 Tilt-Up Latch Assembly 22 23 24 25 26 27 28 5847 5744-20 5744-10 5744-15 5744-13 5744-12 5744-14 Plastic Tip Tilt-Up Latch Spring Arm Spring Pivot Bushing Compression Spring (3/8 x 5/8) Mount Angle, LH Hook, Tilt-Up Latch Mount Angle, RH 1 1 1 1 1 1 1 Chassis Assembly 29 30 5845 5267-1 31 32 33 34 5270-1 5420-2 5037-1 5035 5035-1 5036 5038-1 35 Rubber Bumper (1.50 OD x 1.25) Retainer Collar (1") (Includes Item # F113) Pivot Bearing Tail Wheel Fork Bearing Tail Wheel & Tire Assembly (13 x 6.50-6) Tire Only (13 x 6.50-6) Wheel & Hub Only (6 x 4.5) Axle Spacer Tube (6-5/8) Use only genuine Walker® replacement parts. 4 DESCRIPTION NO. REQ’D Wheel & Tire Assembly LP (18 x 8.50-10) 2 Tire Only (18 x 8.50-8) ** Wheel Only (8 x 7) ** Wheel & Tire Assembly (18 x 6.50-8) *** Tire Only (18 x 6.50-8) ** Wheel Only (8 x 5.5) ** Tire Tube (18 x 8.50-8) ** Chassis Frame 1 Fasteners Rear Bumper Assembly (GHS 6.7 Bushel Models Only)* 8 9 10 11 12 ITEM NO. 2 1 2 1 2 1 ** ** 1 * 10-24 Keps Nut 1/4-20 Keps Nut 5/16-18 Whiz Locknut 3/8-16 Keps Nut 3/8-16 Whiz Locknut 3/8-16 ESNA Nut 1/2-13 Self-Locking Nut 5/16-18 ESNA Nut 10-24 x 1/2 PPHMS 10-24 x 5/8 PPHMS 1/4-20 x 1/2 Hex Bolt 5/16-18 x 3/4 Hex Bolt 3/8-16 x 1-1/2 Hex Bolt 3/8-16 x 2 1/4 Hex Bolt 1/2 SAE Washer 3/8 SAE Washer 3/8 Wave Spring Washer 3/16 Rivet Backup Washer #10 x 7/8 Fender Washer 5/16-18 x 1 Hex Bolt 5/16-18 x 5/16 Set Screw 3/8-16 x 7/8 Hex Bolt 1/2-20 x 1-1/4 Wheel Lug Bolt #2 x 3/16 Drive Pin 3/8 x 1-1/4 x 1/8 Plastic Washer .375 x .875 x .10 Washer 1/2-13 x 8-1/2 Hex Bolt GR 2 Coil Roll Pin (7/64 x 9/16) 5/16 Conical Washer 2 2 10 2 2 4 1 1 1 1 2 4 2 2 2 2 2 1 2 1 2 2 8 2 2 4 1 1 2 Rear Bumper Assembly for GHS 9.5 Bushel Models is not shown here. Refer to BODY ASSEMBLY (GHS 9.5 BUSHEL MODELS), Page 6. Rear Bumper Assembly for SD Models is not shown here. Refer to BODY ASSEMBLY (SD MODELS), Page 8. ** Service Part Only *** May be ordered as a factory-installed option or for dealer installation. Narrow Drive Tires are used when installing a 36" Deck. Contact your Walker dealer. Effective Date 12-01-00 BODY / CHASSIS ASSEMBLY (GHS MODELS) Effective Date 12-01-00 Use only genuine Walker® replacement parts. 5 BODY ASSEMBLY (GHS 9.5 BUSHEL MODELS) ITEM NO. PART NO. DESCRIPTION NO. REQ’D Body Assembly (GHS 9.5 Bushel Models Only)* 1 2 3 4 5 6 7 5566 5516-15 7516-5 5162 7517-2 5845 5516-10 Tilt Stop Strap Rear Bumper (9.5) MC Twin Catcher Pivot Bushing Roller Wheel (5") Catcher Pivot Plate Rubber Bumper (1.50 OD x 1.25) Bumper Mount (C-Twin) ITEM NO. PART NO. DESCRIPTION NO. REQ’D Fasteners F002 F009 F012 F013 F014 F026 F027 F034 F042 F059 F085 F087 F151 F213 F241 2 1 2 2 2 1 2 * 10-24 Keps Nut 5/16-18 Whiz Locknut 3/8-16 Keps Nut 3/8-16 Whiz Locknut 3/8-16 ESNA Nut 10-24 x 1/2 PPHMS 10-24 x 5/8 PPHMS 5/16-18 x 3/4 Hex Bolt 3/8-16 x 2-1/4 Hex Bolt 3/8 Wave Spring Washer 3/16 Rivet Backup Washer #10 x 7/8 Fender Washer 3/8-16 x 7/8 Hex Bolt 3/4-10 Jam Nut .375 x .875 x .10 Washer 4 5 2 2 2 2 2 4 2 2 2 4 2 2 4 Rear Bumper Assembly for GHS 6.7 Bushel Models is not shown here. Refer to BODY / CHASSIS ASSEMBLY (GHS MODELS), Page 4. Rear Bumper Assembly for SD Models is not shown here. Refer to BODY ASSEMBLY (SD MODELS), Page 8. NOTE: Refer to BODY / CHASSIS ASSEMBLY (GHS MODELS), Page 4 for all common parts used on both GHS and SD models. Use only genuine Walker® replacement parts. 6 Effective Date 12-01-00 BODY ASSEMBLY (GHS 9.5 BUSHEL MODELS) Effective Date 12-01-00 Use only genuine Walker® replacement parts. 7 BODY ASSEMBLY (SD MODELS) ITEM NO. PART NO. DESCRIPTION NO. REQ’D 8650-10 5656 3 4 5 5845 5652-1 5651-1 Bed Liner Utility Bed (Includes Items # 1 & 3) Rubber Bumper (1.50 OD x 1.25) Utility Bed Mount, LH Utility Bed Mount, RH F002 F005 F009 F014 F020 F033 F034 F042 F050 F059 F084 F091 F128 1 1 2 1 1 Rear Bumper Assembly (SD Models Only)* 6 7 8 9 7153-3 5112 5161 5162 Cover Plate Rear Bumper Bumper Pad Roller Wheel (5") PART NO. DESCRIPTION NO. REQ’D Fasteners Utility Bed Assembly 1 2 ITEM NO. 1 1 2 2 * 10-24 Keps Nut 1/4-20 ESNA Nut 5/16-18 Whiz Locknut 3/8-16 ESNA Nut 5/16-18 ESNA Nut 1/4-20 x 1 PTH Bolt 5/16-18 x 3/4 Hex Bolt 3/8-16 x 2-1/4 Hex Bolt 1/4 SAE Washer 3/8 Wave Spring Washer 5/16 Wave Spring Washer 5/16-18 x 5/8 Hex Bolt 10-24 x 3/8 PTHMS 4 2 10 2 2 2 8 2 2 2 2 2 4 Rear Bumper Assembly for GHS Models is not shown here. Refer to BODY / CHASSIS ASSEMBLY (GHS MODELS), Page 4, or BODY ASSEMBLY (GHS 9.5 BUSHEL MODELS), Page 6. NOTE: Refer to BODY / CHASSIS ASSEMBLY (GHS MODELS), Page 4 for all common parts used on both GHS and SD models. Use only genuine Walker® replacement parts. 8 Effective Date 12-01-00 BODY ASSEMBLY (SD MODELS) Effective Date 12-01-00 Use only genuine Walker® replacement parts. 9 MAIN COMPONENT POWER TRANSMISSION (GHS MODELS) ITEM NO. PART NO. DESCRIPTION NO. REQ’D Clutch Lever Assembly 1 2 3 4 5 6 7 8 9 6358-1 5830 7860 7303-10 7380-5 7226-10 5841 6130-5 6130-10 10 11 12 13 7201-3 8368 7201-5 8243-1 8243 14 15 16 17 18 19 20 21 22 23 24 5265 8243-3 8375 7377 7378 5281-5 5280 8305 8370 8250 8369 Clutch Lever (Includes Items # 2 & 3) Grease Fitting Handle Grip Clutch Actuator Bolt (3/8) Knuckle Joint, 3/8 ID Compression Spring (3/4 x 2-1/2) Retainer Washer Push Rod, Clutch Actuator Clutch Actuator Rod Assembly (Includes Items # 2, 4-6, 8, F054, F336 & F353) DU Bearing PTO Belt Tightener Inner Race (2-1/4) Clutch Idler Pulley Clutch Idler Pulley Assembly (Includes Items # 14, 15 & F070) Bearing (3/4) Hub, Idler Pulley PTO Belt Tightener Stop Plastic Washer (1 x .438 x .025) Pivot Bearing (7/16 x 9/16) Clevis Pin (1/4 x 0.80) Clevis (1/4) Brake Actuator Rod Bearing, Brake Actuator Brake Spring (1/2 x 2-1/2) Brake Actuator (Includes Items # 2 & 22) 1 6 1 1 1 1 4 1 1 ITEM NO. PART NO. 43 44 45 5268 7833 7241-2 46 47 48 49 50 8539 8349 8393 8273 7240-1 7240-2 7050-1 8371-1 8377 8050 5245 7248 7275-15 7523-2 8304 6250 7236 36 37 8237 8230 Dipstick, Gearbox Mount Bracket, Brake Band Brake Band Guide PTO Gearbox Idler Pulley (3") Ground Drive Belt, Micro-V Universal Joint Tube Assembly Clevis Pin (1/4 x 5/8) Brake Band (14-1/2) Drive Belt (3VX375) PTO Drive Pulley (Includes Items # F075 & F114) Engine Pulley (Includes Item # F163) Engine PTO Belt F002 F003 F004 F005 F009 F012 F025 F029 F034 F040 F041 F042 F043 F047 F054 F061 F067 F069 F070 F075 F114 F116 F121 F131 F132 F135 F163 F168 F171 F178 F182 F186 F226 F240 F241 F325 F336 F353 1 1 1 2 1 2 2 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 Jackshaft Assembly 38 39 40 41 42 7245-1 6325-2 7349-13 7210-4 5221 Idler Pulley (3/8 Groove) Spacer Bushing (5/16) Idler Arm Inner Race (1-1/2) Extension Spring (3/4 x 4) Use only genuine Walker® replacement parts. 10 NO. REQ’D Bearing (3/4) Cable Clamp (7/8 x 1/4) Transmission Drive Pulley, Micro-V (Includes Item # F171) Starter Relay Mount Transmission Belt Tightener Arm Jackshaft Support Jackshaft (3/4 x 7-1/2) Jackshaft Drive Pulley (Includes Item # F171) Jackshaft Drive Pulley (2-3/4 / 3V) 2 1 1 10-24 Keps Nut 1/4-28 Hex Nut 1/4-20 Keps Nut 1/4-20 ESNA Nut 5/16-18 Whiz Locknut 3/8-16 Keps Nut 10-24 x 3/8 PPHMS 1/4-20 x 1/2 Hex Bolt 5/16-18 x 3/4 Hex Bolt 3/8-16 x 1-1/2 Hex Bolt 3/8-16 x 1-3/4 Hex Bolt 3/8-16 x 2-1/4 Hex Bolt 3/8-16 x 3 Hex Bolt 3/8-16 x 4-1/2 Hex Bolt AN960616 Washer 1/4 Internal Star Lock Washer 3/16 x 3/16 x 1 Key 3/32 x 1/2 Cotter Pin 1-3/4 Internal Snap Ring 5/16-18 x 1/2 SQH Set Screw 5/16-18 x 5/8 SQH Set Screw 1/4-20 x 1-1/4 Hex Bolt 5/16-18 x 3/8 x 1 SHL Bolt 5/16-18 x 1/2 Hex Bolt 1/4-20 x 2-3/4 Hex Bolt 3/16 x 3/16 x 1-3/4 Key 5/16-18 x 3/4 SQH Set Screw 5/16 Split Lock Washer 5/16-18 x 3/8 Set Screw 1/4 x 1 Fender Washer 5/8 x 1/4 x 1/8 Washer 5/64 x 1/2 Cotter Pin 5/16-18 x 7/8 Hex Bolt 1/4 x 1/4 x 2-1/4 Key .375 x .875 x .10 Washer 1/4-20 x 3 Hex Bolt 3/8-16 Jam Nut 3/8-16 ESNA LP Nut 1 2 3 1 3 8 1 1 2 1 2 3 1 1 4 1 2 2 1 1 1 1 1 2 1 1 2 6 4 1 2 1 6 1 1 1 1 1 1 1 1 1 1 * Fasteners 6 1 1 1 1 PTO Drive Shaft Assembly 25 26 27 28 29 30 31 32 33 34 35 DESCRIPTION 1 2 1 2 2 * May be ordered as a kit for dealer installation. Contact your Walker dealer. Effective Date 12-01-00 MAIN COMPONENT POWER TRANSMISSION (GHS MODELS) Effective Date 12-01-00 Use only genuine Walker® replacement parts. 11 MAIN COMPONENT POWER TRANSMISSION (SD MODELS) ITEM NO. PART NO. DESCRIPTION NO. REQ’D Clutch Lever Assembly 1 2 3 4 5 6 7 8 9 6358-1 5830 7860 7303-10 7380-5 7226-10 5841 6130-5 6130-10 10 11 12 13 7201-3 8368 7201-5 8243-1 8243 14 15 16 17 18 19 20 21 22 23 24 5265 8243-3 8375 7377 7378 5281-5 5280 8305 8370 8250 8369 Clutch Lever (Includes Items # 2 & 3) Grease Fitting Handle Grip Clutch Actuator Bolt (3/8) Knuckle Joint, 3/8 ID Compression Spring (3/4 x 2-1/2) Retainer Washer Push Rod, Clutch Actuator Clutch Actuator Rod Assembly (Includes Items # 2, 4-6, 8, F054, F336 & F353) DU Bearing PTO Belt Tightener Inner Race (2-1/4) Clutch Idler Pulley Clutch Idler Pulley Assembly (Includes Items # 14, 15 & F070) Bearing (3/4) Hub, Idler Pulley PTO Belt Tightener Stop Plastic Washer (1 x .438 x .025) Pivot Bearing (7/16 x 9/16) Clevis Pin (1/4 x 0.80) Clevis (1/4) Brake Actuator Rod Bearing, Brake Actuator Brake Spring (1/2 x 2-1/2) Brake Actuator (Includes Items # 2 & 22) 1 6 1 1 1 1 4 1 1 ITEM NO. PART NO. 43 7241-2 44 45 46 47 48 49 50 7833 8539 5268 8349 8393 8273 7240-1 7240-2 7050-1 8371-1 8377 8050 5245 7248 7275-15 7523-2 8304 6250 7236 36 37 8237 8230 Dipstick, Gearbox Mount Bracket, Brake Band Brake Band Guide PTO Gearbox Idler Pulley (3") Ground Drive Belt, Micro-V Universal Joint Tube Assembly Clevis Pin (1/4 x 5/8) Brake Band (14-1/2) Drive Belt (3VX375) PTO Drive Pulley (Includes Items # F075 & F114) Engine Pulley (Includes Item # F163) Engine PTO Belt F002 F003 F004 F005 F009 F012 F025 F029 F034 F040 F041 F042 F043 F047 F054 F061 F067 F069 F070 F075 F090 F114 F116 F121 F131 F132 F135 F163 F168 F171 F178 F182 F186 F226 F240 F241 F336 F353 1 1 1 2 1 2 2 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 Jackshaft Assembly 38 39 40 41 42 7245-1 6325-2 7349-13 7210-4 5221 Idler Pulley (3/8 Groove) Spacer Bushing (5/16) Idler Arm Inner Race (1-1/2) Extension Spring (3/4 x 4) Use only genuine Walker® replacement parts. 12 NO. REQ’D Transmission Drive Pulley, Micro-V (Includes Item # F171) Cable Clamp (7/8 x 1/4) Starter Relay Mount Bearing (3/4) Transmission Belt Tightener Arm Jackshaft Support Jackshaft (3/4 x 7-1/2) Jackshaft Drive Pulley (Includes Item # F171) Jackshaft Drive Pulley (2-3/4 / 3V) 1 1 1 2 1 1 1 1 10-24 Keps Nut 1/4-28 Hex Nut 1/4-20 Keps Nut 1/4-20 ESNA Nut 5/16-18 Whiz Locknut 3/8-16 Keps Nut 10-24 x 3/8 PPHMS 1/4-20 x 1/2 Hex Bolt 5/16-18 x 3/4 Hex Bolt 3/8-16 x 1-1/2 Hex Bolt 3/8-16 x 1-3/4 Hex Bolt 3/8-16 x 2-1/4 Hex Bolt 3/8-16 x 3 Hex Bolt 3/8-16 x 4-1/2 Hex Bolt AN960616 Washer 1/4 Internal Star Lock Washer 3/16 x 3/16 x 1 Key 3/32 x 1/2 Cotter Pin 1-3/4 Internal Snap Ring 5/16-18 x 1/2 SQH Set Screw 1/4-20 x 2-1/2 Hex Bolt 5/16-18 x 5/8 SQH Set Screw 1/4-20 x 1-1/4 Hex Bolt 5/16-18 x 3/8 x 1 SHL Bolt 5/16-18 x 1/2 Hex Bolt 1/4-20 x 2-3/4 Hex Bolt 3/16 x 3/16 x 1-3/4 Key 5/16-18 x 3/4 SQH Set Screw 5/16 Split Lock Washer 5/16-18 x 3/8 Set Screw 1/4 x 1 Fender Washer 5/8 x 1/4 x 1/8 Washer 5/64 x 1/2 Cotter Pin 5/16-18 x 7/8 Hex Bolt 1/4 x 1/4 x 2-1/4 Key .375 x .875 x .10 Washer 3/8-16 Jam Nut 3/8-16 ESNA LP Nut 1 2 3 1 3 8 1 1 2 1 2 3 1 1 4 1 2 2 1 1 1 1 1 1 2 1 1 2 6 4 1 2 1 6 1 1 1 1 * Fasteners 6 1 1 1 1 PTO Drive Shaft Assembly 25 26 27 28 29 30 31 32 33 34 35 DESCRIPTION 1 2 1 2 2 * May be ordered as a kit for dealer installation. Contact your Walker dealer. Effective Date 12-01-00 MAIN COMPONENT POWER TRANSMISSION (SD MODELS) Effective Date 12-01-00 Use only genuine Walker® replacement parts. 13 ENGINE GROUP ITEM NO. PART NO. DESCRIPTION NO. REQ’D Precleaner Assembly 1 2 3 4 5 6 7 8 9 10 7026-2 7840 6028-1 7027 6029 6087 6090 5088-1 5090-1 6090-10 11 12 13 14 15 16 5090-3 5088-11 5090-2 5088-5 5091-9 5091-10 Remote Precleaner (Includes Item # 2) Hose Clamp (1-5/16 to 2-1/4) Precleaner Tube Elbow, Precleaner Hose Clamp (2-1/2) Air Intake Hose Air Cleaner (Includes Item #11) Air Cleaner Band Air Cleaner Cartridge Air Cleaner Assembly (Includes Items # 7, 9, 11-13, 15 & 16) Safety Filter Air Cleaner Cap Vacuator Valve Air Cleaner Draw Latch Elbow, Brass 90° Air Flow Indicator & Nipple ITEM NO. 5082 18 19 5082-2 6046 20 21 22 23 24 25 26 8023 8015-2 5879-3 5020 6015-3 5083-1 5083 Fuel Tank Cap (Includes Item # 18) Fuel Cap Seal Fuel Tank, 3.0 gal., Gas (Includes Items # 17, 18, 25 & 26) Fuel Tank Support Fuel Line, Tank (1/4 x 15) Hose Clamp (1/2) Fuel Filter Fuel Line, Engine (1/4 x 12-1/2) Bushing, Rubber Fuel Shut-Off Valve & Filter Use only genuine Walker®replacement parts. 14 DESCRIPTION NO. REQ’D Engine & Exhaust Assemblies 1 3 1 1 2 1 1 1 1 * 1 1 1 1 1 1 27 NS 28 29 30 31 32 33 34 35 36 37 38 NS NS NS 8897 6052 6051 8013-1 8013-5 8013-7 NS 6327 F004 F009 F029 F031 F061 F091 F184 F185 F218 F219 * * 1 1 1 4 1 1 * * 16 HP Engine (Kohler TH16S, Spec. # 52518) Oil Filter (Kohler 2805001) Gasket (Kohler 2404102) Nut (Kohler M-0841080) Muffler Band Clamp Exhaust Pipe, Rear Exhaust Pipe, Front Muffler Muffler Heat Shield Muffler Heat Deflector Starter Solenoid (Kohler 2543502) Solenoid Mount 1 1 2 4 2 1 1 1 1 1 1 1 1/4-20 Keps Nut 5/16-18 Whiz Locknut 1/4-20 x 1/2 Hex Bolt 1/4-20 x 5/8 Hex Bolt 1/4 Internal Star Lock Washer 5/16-18 x 5/8 Hex Bolt 1/4-20 x 1/2 Hex Bolt SS 1/4 Internal Star Lock SS 7/16 Split Lock Washer 7/16-14 x 1-1/4 Hex Bolt 5 2 4 3 2 2 6 6 4 4 Fasteners Fuel Tank Assembly 17 PART NO. * Service Part Only NOTE: Refer to Kohler Engine Decal (NS) for Engine Identification Numbers. Effective Date 12-01-00 ENGINE GROUP Effective Date 12-01-00 Use only genuine Walker® replacement parts. 15 HYDROSTATIC GROUND DRIVE ASSEMBLIES ITEM NO. PART NO. DESCRIPTION NO. REQ’D 5027 5028 5057 4 5 5847 5028-3 Lockout Mount Lockout Lever Lockout Cam (Includes Item # F081) Plastic Tip Transmission Lockout Assembly (Includes Items # 1-4, F023 & F027) 2 2 2 2 * Ground Drive Assemblies 6 7 8 9 10 6209-1 6243-2 5026 6206 6200-7 11 5126 12 13 14 15 16 17 6233-1 6234 6201 7244 6243-1 5025 Bridge Assembly Hydro Fan, CCW Hydrostatic Drive, CW (700-041) Pressure Relief Valve Gear Axle Drive Assembly (Includes Item # 9) Cable Retainer (Uses Existing Bolt on Gear Axle Drive Assembly) Pinion Gear Spacer, Pinion Gear O-Ring Seal Hydro Pulley (3-7/8) Hydro Fan, CW Hydrostatic Drive, CCW (700-042) 1 1 1 25 26 27 28 29 30 31 5025-5 5025-8 5025-7 5025-2 5022 5024 5023 32 33 34 5023-1 5025-6 5025-3 6430-10 6430-2 20 21 5775-2 6430-1 22 23 24 6430-9 5830 6840-1 Outboard Mount, LH Deck Support Arm, LH (Includes Item # 23) Hitch Pin (#6) Deck Support Arm, RH (Includes Item # 23) Outboard Mount, RH Grease Fitting Support Arm Bushing Use only genuine Walker® replacement parts. 16 DESCRIPTION NO. REQ’D Input Shaft Bearing, Input Snap Ring Seal, Input Shaft Reservoir to Casting Gasket Reservoir Cap and Gasket Transmission Reservoir Kit (Includes Items # 29, 30 & 32) Rubber Bladder O-Ring & Plug Assembly Seal, Control Shaft * * * * * * * * * * Fasteners * F012 F023 F027 F036 F038 F040 F043 F053 F063 F064 F081 F160 F178 F194 F200 F244 F262 F359 2 1 2 2 2 2 1 1 Deck Support Arm Assemblies 18 19 PART NO. Transmission Repair Parts* Transmission Lockout Assembly 1 2 3 ITEM NO. 1 1 2 1 1 2 2 * 3/8-16 Keps Nut 10-24 ESNA Nut 10-24 x 5/8 PPHMS 1/4-20 x 1/2 SBH Screw 3/8-16 x 1 Hex Bolt 3/8-16 x 1-1/2 Hex Bolt 3/8-16 x 3 Hex Bolt 7/16 Internal Star Lock Washer 3/8 Internal Star Lock Washer 1/8 x 1/2 Woodruff Key (#3) A/A45D Aluminum Pop Rivet External Snap Ring (.669 Shaft) 1/4 x 1 Fender Washer 7/16 x 1-1/4 x 1/8 Washer 7/16-20 x 3 Grade 8 Bolt 7/16-20 x 3/4 Hex Bolt 3/8-16 x 4 Hex Bolt (Spec) All Thread 5/16-18 x 5/16 Set Screw (Unbrako Knurl Point) 1 2 2 2 4 4 7 4 16 4 2 2 2 2 2 2 1 4 Service Part Only Effective Date 12-01-00 HYDROSTATIC GROUND DRIVE ASSEMBLIES Effective Date 12-01-00 Use only genuine Walker® replacement parts. 17 STEERING CONTROL ASSEMBLIES ITEM NO. PART NO. DESCRIPTION NO. REQ’D Transmission Spring Assemblies 1 2 3 4 5 6 7 8 9 10 11 6199 5552 5192-1 5194 6191 5195 6196 5197 5193 5191 5199 Transmission Spring Assembly (RH) (Includes Items # 2-7, F003, F287, F320 & F352) Ball Joint (1/4-28) Spring Plunger (5/32) Hole Plunger Sleeve Spring Slide (4-3/4) Compression Spring (1 x 5-1/8) Spring Slide Cap J-Bolt Washer (.750 ID x 1.00 OD x .085) Spring Slide (3-5/8) Transmission Spring Assembly (LH) (Includes Items # 2-4, 6, 8-10, F003, F146, F287 & F352) * 2 2 2 1 2 1 1 1 1 ITEM NO. PART NO. 33 34 35 5281-5 5470-1 5450-3 36 5450-5 5453-10 37 38 5862 7170 39 5213-1 5214-2 5173 14 15 16 17 18 19 5172 5142-2 5830 6212 5141 5140-15 20 5142-7 5140-13 21 22 23 24 25 26 27 28 29 30 5850-2 5212-2 5213-2 5223 5450 5463 5214-1 5391-3 5217 5451-3 31 32 5451-5 5219 5280 Ball Joint (5/16-24), Nylon Lined FSC Actuator Rod (Includes Items # 33 & F003) Bearing, Nylon (.255 ID x .379 OD x .250) FSC Actuator Cam Grease Fitting Transmission Control Arm, RH FSC Friction Washer FSC Friction Body (Includes Item # 16) FSC Key FSC Control Assembly (Includes Items # 16, 18-20, 31, F192 & F193) Handle Grip, Foam (5-1/2) Transmission Control Arm, LH Control Rod, LH (6") Extension Spring (1/4 x 5-1/2) D-Clip Steering Lever Actuator Bearing, Steering Lever Actuator Steering Lever Support Pivot Pin, Steering Lever Steering Lever Assembly, LH (Includes Items # 16, 21, 36, F188, F198 & F345) Adjustable Steering Lever Arm, LH FSC Extension Spring (3/4 x 6-3/4) Clevis (1/4) Use only genuine Walker® replacement parts. 18 NO. REQ’D Clevis Pin (1/4 x 0.80) Speed Control Stop Steering Lever Assembly, RH (Includes Items # 16, 21, 36, F188, F198 & F345) Adjustable Steering Lever Arm, RH Adjustable Steering Lever Handle (Includes Items # 21 & F345) FSC Knob FSC Lever Assembly (Includes Item # 16) Control Rod, RH (15") 1 1 1 1/4-28 Hex Nut 1/4-20 Keps Nut 5/16-18 Jam Nut 5/16-24 Keps Nut 5/16-18 Whiz Locknut 5/16-24 ESNA Nut 3/8-16 Keps Nut 5/16-24 Jam Nut 1/4-20 x 1/2 Hex Bolt 1/4-20 x 3/4 Hex Bolt 5/16-18 x 3/4 Hex Bolt 1/4 SAE Washer 3/8 SAE Washer 1/8 x 1/2 Woodruff Key (#3) 1/8 x 1 Cotter Pin 3/32 x 1/2 Cotter Pin 5/16-18 x 1 Hex Bolt AN960816L Washer 1/4-20 Jam Nut 1/4 x 5/8 x 1/8 Washer .312 x .700 x .074 Washer 5/64 x 1/2 Cotter Pin 1/4-20 Self-Locking Nut 3/8-24 Self-Locking Nut 3/8 Belleville Spring Washer .250 x .625 x .040 Washer, SS 1/4-28 Keps Nut 1/8 x 3/4 Split Spring Pin 1/4-20 x .770 Knurled Bolt 5/32 x 1 Hvy Duty Roll Pin 3 8 1 2 1 2 2 2 2 4 1 3 2 2 1 1 1 3 1 3 2 1 4 1 3 2 2 1 4 2 1 2 1 1 1 Fasteners * F003 F004 F007 F008 F009 F010 F012 F024 F029 F032 F034 F050 F051 F064 F068 F069 F093 F134 F146 F182 F183 F186 F188 F192 F193 F198 F287 F320 F345 F352 Steering Lever & FSC Assemblies 12 13 DESCRIPTION 2 1 1 1 6 1 2 1 1 * 2 1 1 2 2 2 2 1 1 1 1 1 1 * Service Part Only Effective Date 12-01-00 STEERING CONTROL ASSEMBLIES Effective Date 12-01-00 Use only genuine Walker® replacement parts. 19 THROTTLE & CHOKE CONTROL ASSEMBLIES ITEM NO. PART NO. DESCRIPTION NO. REQ’D Throttle & Choke Control Assemblies 1 2 3 4 5 6 7 8 9 10 8121-1 8122-1 5172 5108-7 5108-10 5108-1 5108-5 5108-11 5108-8 7108 8121 8122 Throttle Cable Choke Cable Nylon Bearing Control Lock Tab Friction Washer (.125) Control Lever, Throttle & Choke Throttle Control Knob, Red Friction Washer (.062) Control Bracket Control Assembly, Throttle and Choke Complete Throttle Control and Cable Assembly (Includes Item # 7) Complete Choke Control and Cable Assembly (Includes Item # 11) Use only genuine Walker® replacement parts. 20 1 1 2 2 2 2 1 2 2 2 ITEM NO. PART NO. 11 12 13 14 5108-6 8123 5975-3 5975-1 NO. REQ’D Choke Control Knob, Black Insulation Sleeve (3/8 x 6) Cable Tie (50# x 7") Cable Tie (18# x 3-3/4") 1 1 1 1 10-24 Keps Nut 1/4-20 ESNA Nut 10-24 x 3/8 PPHMS 1/4 SAE Washer 10-24-1/4 x 3/8 SHL Bolt 1/4 Belleville Spring Washer 6 2 4 2 2 4 Fasteners F002 F005 F025 F050 F164 F201 * * DESCRIPTION * Service Part Only Effective Date 12-01-00 THROTTLE & CHOKE CONTROL ASSEMBLIES Effective Date 12-01-00 Use only genuine Walker® replacement parts. 21 PARKING BRAKE ASSEMBLY ITEM NO. PART NO. DESCRIPTION NO. REQ’D 7406-1 7406-5 7406-2 5830 7407 7404 7405 7402 7408 7415 5567-3 7403 7404-1 7412 5833 7410 7409 7401-3 7401-1 5552 Handle Grip, Red Parking Brake Lever Lever Mount Grease Fitting Clevis Pin (3/16 x 1/2) Brake Actuator Arm Pin, Transmission Lock Clevis Compression Spring (1/2 x 3/4) Rubber Dust Shield (5/8 x 3/8 x 1/32) O-Ring Seal (1/4 x 3/8) Plunger Bushing, Gear Axle Brake Actuator Mount Clevis Pin (3/16 x 3/4) Cable Clamp (1/4) Brake Control Cable, LH (27") Brake Control Cable, RH (21") Cable Mount Bracket Cable Pull Rod Ball Joint (1/4-28) Use only genuine Walker® replacement parts. 22 PART NO. DESCRIPTION NO. REQ’D Fasteners Parking Brake Assembly 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ITEM NO. 1 1 1 1 2 2 2 2 2 2 4 2 2 2 2 1 1 1 1 1 F002 F003 F004 F025 F029 F032 F054 F072 F086 F109 F111 F112 F127 F261 F287 10-24 Keps Nut 1/4-28 Hex Nut 1/4-20 Keps Nut 10-24 x 3/8 PPHMS 1/4-20 x 1/2 Hex Bolt 1/4-20 x 3/4 Hex Bolt AN960616 Washer 1/4 “E” Retainer Ring #10 SAE Washer 1/8 x 5/8 Roll Pin 1/8 x 3/4 Cotter Pin 5/8 x 1-1/4 x .03 Washer 1/16 x 1/2 Cotter Pin AN960616L Washer 1/4-28 Keps Nut 2 1 4 2 3 1 1 2 4 2 1 2 4 6 1 Effective Date 12-01-00 PARKING BRAKE ASSEMBLY Effective Date 12-01-00 Use only genuine Walker® replacement parts. 23 GHS GROUP ITEM NO. PART NO. DESCRIPTION NO. REQ’D Delivery Chute Assembly When Optional 9.5 Bushel Catcher Assembly is purchased, Item # 6 is replaced by P/N 7530 (Body Chute), and Item # 8 is replaced by P/N 8511-1 (Delivery Chute Assembly, 9.5). 1 2 3 4 5 6 7 8 5515-2 5592-13 5592-12 5578 5577 6530 5578-10 5511-3 Elbow Delivery Spout Assembly Backing Plate, Grass-Pak® Switch Mount Plate, Grass-Pak® Switch Rear Clip, Chute Mount Side Clip, Chute Mount Body Chute (10") Front Clip, Chute Mount Delivery Chute Assembly, (6.7) (Includes Items # 4, 5, 7, F079, F085 & F362) ITEM NO. 7238 7234 7239-2 7201-3 5221 7364 7201-4 5841 7245 Blower Drive Pulley (4-1/4 / 3V) Blower Belt (3VX280) Blower Pulley (3-3/8 / 3V) DU Bearing Extension Spring (3/4 x 4) Blower Belt Tightener Arm Inner Race (1-1/2) Retainer Washer Idler Pulley (1/2 Groove) F002 F004 F009 F012 F025 F026 F034 F038 F040 F042 F054 F067 F074 F075 F079 F085 F102 F114 F128 F163 F217 F218 F219 F231 F362 1 1 1 1 2 1 1 1 1 1 1 2 1 1 1 1 1 * Blower Assembly 18 19 20 21 22 23 24 25 5268 6543 6542 7528 6545 6525-2 6526 5595-2 7833 Bearing (3/4) Includes Locking Collar Housing (10" Blower) Blower Assembly (10") Skid Bar (10" Blower) Blower Wheel (10") Faceplate (10" Blower) Intake Tube (6-1/2 x 2-1/2) Intake Cover Cable Clamp (7/8 x 1/4) Use only genuine Walker® replacement parts. 24 2 1 * DESCRIPTION NO. REQ’D Fasteners Blower Belt Tightener Assembly 9 10 11 12 13 14 15 16 17 PART NO. 10-24 Keps Nut 8 1/4-20 Keps Nut 6 5/16-18 Whiz Locknut 1 3/8-16 Keps Nut 3 10-24 x 3/8 PPHMS 2 10-24 x 1/2 PPHMS 2 5/16-18 x 3/4 Hex Bolt 1 3/8-16 x 1 Hex Bolt 1 3/8-16 x 1-1/2 Hex Bolt 1 3/8-16 x 2-1/4 Hex Bolt 1 AN960616 Washer 1 3/16 x 3/16 x 1 Key 1 1/4-20 x 3/8 Set Screw 2 5/16-18 x 1/2 SQH Set Screw 1 A/A66D Aluminum Pop Rivet 12 3/16 Rivet Backup Washer 6 10-24 x 1-1/2 PTHMS 2 5/16-18 x 5/8 SQH Set Screw 2 10-24 x 3/8 PTHMS 4 5/16-18 x 3/4 SQH Set Screw 1 7/16-14 Hex Nut 1 7/16 Split Lock Washer 1 7/16-14 x 1-1/4 Hex Bolt 1 1/4 x 3/4 Woodruff Key (#806) 1 A/A62D Alum. Pop Rivet (3/16D x 13/32L) 2 Service Part Only ** Plugs blower when GHS is not in use. Furnished only with Mulching Decks, SD Decks used on a GHS Tractor, Rotary Broom Attachment and Snowblower Attachment. 1 1 1 1 ** 1 Effective Date 12-01-00 GHS GROUP Effective Date 12-01-00 Use only genuine Walker® replacement parts. 25 GHS POWERFIL® ASSEMBLY ITEM NO. PART NO. DESCRIPTION NO. REQ’D GHS Powerfil® Assembly 1 2 3 4 5 6 7 8 9 5557 5551-3 5551-1 5552 5518-2 5517-2 5558-1 5553-3 5558-2 5549 10 11 12 13 14 5553-1 5554 5519-3 5519-2 5519 15 5977 Motor Mount, Powerfil® Bearing Cap, Powerfil® Pivot Bearing (#S3PP) Ball Joint (1/4-28) Pivot, Delivery Spout Pivot Mount Powerfil® Push Rod Bushing, Powerfil® Actuator Powerfil® Actuator Rod Actuator Rod Assembly (Includes Items # 4, 7-10 & F003) Spring, Powerfil® Actuator Actuator Arm Motor Mount Nut (5/8-24 Panel Nut) Motor Mount Washer Actuator Motor (12/24V) (Includes Items # 12 & 13) Grommet (1/2 ID x 7/8 OD x 1/16) Use only genuine Walker® replacement parts. 26 ITEM NO. PART NO. DESCRIPTION NO. REQ’D Fasteners F002 F003 F025 F054 F061 F085 F101 F109 F129 F261 F287 1 1 2 2 1 1 1 4 1 * 2 1 * 10-24 Keps Nut 1/4-28 Hex Nut 10-24 x 3/8 PPHMS AN960616 Washer 1/4 Internal Star Lock Washer 3/16 Rivet Backup Washer 10-24 x 1-1/4 SHC Screw 1/8 x 5/8 Roll Pin 10-24 x 1/2 PTHMS AN960616L Washer 1/4-28 Keps Nut 9 4 1 1 1 1 1 1 7 1 1 Service Part Only * * 1 1 Effective Date 12-01-00 GHS POWERFIL® ASSEMBLY Effective Date 12-01-00 Use only genuine Walker® replacement parts. 27 GHS 6.7 BUSHEL CATCHER & EXHAUST DEFLECTOR ASSEMBLIES ITEM NO. PART NO. DESCRIPTION NO. REQ’D Upper Baffle Screen Assembly (Removable) 1 2 3 4 5 6 7 8 7509-3 7505 6507 6856-1 7509-2 6512-2 7506 6509-4 Channel Bottom Mustache Spring Screen Seal, 6.7 (24") Edge Molding, 6.7 (21-3/4) Channel Top Removable Screen (6.7) Knob C-Channel (6.7) 2 2 1 1 2 1 2 1 ITEM NO. PART NO. 26 27 28 29 30 31 7533 5155-15 5522-1 6508 5522-2 5584 DESCRIPTION NO. REQ’D Backing Plate, Handle Box Support, Gas Spring Hinge Backup Plate, LH Safety Latch Hinge Hinge Backup Plate, RH Reinforcing Strap, Catcher Top 2 2 1 1 1 1 5598 Optional Dump Bag (Not Shown) May be ordered as an option. Contact your Walker dealer. Fasteners Exhaust Deflector Assembly 9 10 11 5504 5504-3 5504-1 5504-8 Exhaust Deflector Kit, 6.7 Hinge, Exhaust Deflector Exhaust Deflector (Two Piece Set) Deflector Mount Doubler F002 F004 F009 F020 F025 F027 F035 F037 F049 F061 F079 F085 F129 F172 F188 F195 F196 F198 F203 F230 F242 F252 F255 F329 F330 F351 * 1 1 2 GHS 6.7 Bushel Catcher Assembly 12 13 14 15 16 5583 5588 5130 5514-10 5510-1 5502-1 5502-2 5502-3 17 18 19 20 21 5503-2 5513-1 5155-12 5147 5155-10 22 23 24 25 5524-1 5155-13 5523-6 7532 7534 Handle Rubber Bumper (.75 OD x .50) Side Strap, Door (6.7) Door Frame, Catcher (6.7) 6.7 Bushel Catcher, Including Door 6.7 Catcher, Without Powerfil® (Includes Door) 6.7 Catcher Assembly (Includes Powerfil® ) 6.7 Catcher Assembly and Bumper Mount (Includes Bumper & Powerfil®) Mounting Frame, Catcher (6.7) Mounting Frame Doubler (6.7) 5/16 Ball Stud Spring Clip, Gas Spring Catcher Gas Spring Assembly (Includes Items # 19, 20 & 23) Flanged Hinge Bearing 3/4 Ball Stud Gas Spring Plate Handle, Catcher Lift Catcher Handle Kit (Includes Items # 25, 26, F004 & F172) Use only genuine Walker® replacement parts. 28 1 2 2 1 1 ** ** ** 1 1 2 4 2 2 2 2 2 * * 10-24 Keps Nut 1/4-20 Keps Nut 5/16-18 Whiz Locknut 5/16-18 ESNA Nut 10-24 x 3/8 PPHMS 10-24 x 5/8 PPHMS 5/16-18 x 1-1/4 Hex Bolt 10-24 x 5/8 PTH Screw 5/16 SAE Washer 1/4 Internal Star Lock Washer A/A66D Aluminum Pop Rivet 3/16 Rivet Backup Washer 10-24 x 1/2 PTHMS 1/4-20 x 3/4 Carriage Bolt 1/4-20 Self Locking Nut 1/4-20 x 3/4 PPHMS SS 1/4-20 x 1 PPHMS SS .625 x .250 x .040 Washer, SS 1/4-20 x 5/8 PPHMS SS 1/4-20 x 1-1/4 PPHMS SS 1/4-20 x 7/8 PPHMS SS 10-24 x 3/4 PFHMS 5/16-18 x 1-1/2 Hex Bolt .260 ID x 1.939 OD Washer 3/16 D x 21/32 L Rivet, SS Aluminum Pop Rivet 15 16 2 2 4 4 1 4 4 2 27 13 4 4 17 8 2 9 4 1 14 1 1 2 2 6 This kit is sold as a complete assembly, including mounting hardware. ** Service Part Only Effective Date 12-01-00 GHS 6.7 BUSHEL CATCHER & EXHAUST DEFLECTOR ASSEMBLIES Effective Date 12-01-00 Use only genuine Walker® replacement parts. 29 GHS 9.5 BUSHEL CATCHER & EXHAUST DEFLECTOR ASSEMBLIES ITEM NO. PART NO. DESCRIPTION NO. REQ’D Upper Baffle Screen Assembly (Removable) 1 2 3 4 5 6 7 8 7509-3 7505 7507 7856-1 7509-2 7512-2 7506 7509-4 Channel Bottom Mustache Spring 7.0 / 9.5 Screen Seal, (27-1/2) 7.0 / 9.5 Edge Molding, (26”) Channel Top 7.0 / 9.5 Removable Screen Knob 7.0 / 9.5 C-Channel 2 2 1 1 1 7504 7504-3 7504-1 7504-8 Exhaust Deflector Kit, 7.0 / 9.5 Hinge, Exhaust Deflector Exhaust Deflector (Two Piece Set) Deflector Mount Doubler PART NO. 27 7532 7534 28 29 30 31 32 33 5583 8516 5588 7514-1 8514-11 17 8510-1 8502-1 8502-2 8502-4 18 8513-3 19 8503-2 20 21 22 5155-12 5147 5155-10 23 24 25 26 5524-1 5155-13 5523-6 7533 Handle Backup Plate, Door Sides Rubber Bumper (.75 OD x .50) Backup Plate, Catcher Door Door Frame, Catcher (9.5) (Begin S/N 49198) 9.5 Bushel Catcher, Including Door 9.5 Catcher Assembly, Without Powerfil® (Includes Door) 9.5 Catcher Assembly (Includes Powerfil®) 9.5 Catcher Assembly (Includes Frame & Powerfil®) Mount Frame Doubler (9.5) (Begin S/N 49198) Mounting Frame (9.5) (Begin S/N 49198) 5/16 Ball Stud Spring Clip, Gas Spring Catcher Gas Spring Assembly (Includes Items # 20, 21 & 24) Flanged Hinge Bearing 3/4 Ball Stud Gas Spring Plate Backing Plate, Handle NO. REQ’D Handle, Catcher Lift Catcher Handle Kit (Includes Items # 26, 27, F004 & F172) Box Support, Gas Spring Hinge Backup Plate, LH Pivot Bushing 7.0 / 9.5 Safety Latch Hinge Hinge Backup Plate, RH Reinforcing Strap, Catcher Top 2 * 2 1 2 1 2 2 5598 Optional Dump Bag (Not Shown) May be ordered as an option. Contact your Walker dealer. * Fasteners 1 1 2 F002 F004 F009 F020 F025 F027 F035 F037 F049 F061 F079 F085 F129 F172 F188 F195 F196 F198 F230 F242 F252 F255 F329 F330 F351 GHS 9.5 Bushel Catcher Assembly** 12 13 14 15 16 5155-15 5522-1 7503-9 7508 5522-2 7584 DESCRIPTION 1 Exhaust Deflector Assembly 9 10 11 ITEM NO. 1 2 2 1 1 1 *** *** *** 1 1 2 4 2 2 2 2 2 * 10-24 Keps Nut 1/4-20 Keps Nut 5/16-18 Whiz Locknut 5/16-18 ESNA Nut 10-24 x 3/8 PPHMS 10-24 x 5/8 PPHMS 5/16-18 x 1-1/4 Hex Bolt 10-24 x 5/8 PTH Screw 5/16 SAE Washer 1/4 Internal Star Lock Washer A/A66D Aluminum Pop Rivet 3/16 Rivet Backup Washer 10-24 x 1/2 PTHMS 1/4-20 x 3/4 Carriage Bolt 1/4-20 Self Locking Nut 1/4-20 x 3/4 PPHMS SS 1/4-20 x 1 PPHMS SS .625 x .250 x .040 Washer, SS 1/4-20 x 1-1/4 PPHMS SS 1/4-20 x 7/8 PPHMS SS 10-24 x 3/4 PFHMS 5/16-18 x 1-1/2 Hex Bolt .260 ID x 1.939 OD Washer 3/16 D x 21/32 L Rivet, SS Aluminum Pop Rivet 15 19 2 2 4 4 1 4 4 2 33 16 4 4 20 8 3 5 1 23 1 1 2 2 6 This kit is sold as a complete assembly, including mounting hardware. ** May be ordered as a factory-installed option. Contact your Walker dealer. *** Service Part Only Use only genuine Walker® replacement parts. 30 Effective Date 12-01-00 GHS 9.5 BUSHEL CATCHER & EXHAUST DEFLECTOR ASSEMBLIES Effective Date 12-01-00 Use only genuine Walker® replacement parts. 31 ELECTRICAL ASSEMBLIES (CHASSIS COMPONENTS) ITEM NO. PART NO. DESCRIPTION NO. REQ’D 5932 5975-1 5933 5910 5844 6392 5839 6390 6923 8943 PART NO. DESCRIPTION NO. REQ’D 10-24 Keps Nut 1/4-20 Keps Nut 5/16-18 Whiz Locknut 1/4-20 ESNA Wing Nut 10-24 x 1/2 PPHMS 10-24 x 5/8 PPHMS 1/4-20 x 5/8 Hex Bolt 1/4-20 x 3/4 Hex Bolt 1/4 SAE Washer 5/16-18 x 1 Hex Bolt 10-24 x 1/2 PTHMS 9 5 1 2 3 4 2 3 5 1 1 Fasteners Battery Assembly 1 2 3 4 5 6 7 8 9 10 ITEM NO. Battery Terminal Insul., Black (-) Cable Tie (18# x 3-3/4") Battery Terminal Insul., Red (+) Battery (12V U1-SP30, Dry) Battery Hold-Down Bar Battery Protector Plate Hook Bolt Battery Pan Negative Battery Cable Positive Battery Lead Wire 1 2 1 1 1 1 2 1 1 1 F002 F004 F009 F019 F026 F027 F031 F032 F050 F093 F129 Harness Assembly 11 12 13 14 15 16 17 18 8941 7672 7948-1 6941 7948-5 5975-3 5942-5 6940-4 Circuit Breaker (30 Amp) with Reset Mount Bracket Time Delay Module Relay Switch (30/40 Amp) Time Delay Harness Cable Tie (50# x 7") Safety Switch Wire Harness Use only genuine Walker® replacement parts. 32 1 1 1 1 1 6 2 1 NOTE: Refer to ELECTRICAL CONNECTORS, Page 40 for identification of all Electrical Wiring Service Parts. Effective Date 12-01-00 ELECTRICAL ASSEMBLIES (CHASSIS COMPONENTS) Effective Date 12-01-00 Use only genuine Walker® replacement parts. 33 ELECTRICAL ASSEMBLIES (BODY COMPONENTS) ITEM NO. PART NO. DESCRIPTION NO. REQ’D 8960-2 8960-21 3 4 5 6 7 8 9 10 11 5940-3 5975-3 5983 5975-5 5941-5 7203-6 5977-6 6940-10 8996-4 12 8996-3 13 8996 14 15 16 17 18 5991-1 8990 5991-2 6941 7941-1 19 20 7941-3 7854 Ignition Key (1 Set) Ignition Switch (with Keys) (Includes Items # 1, 20 & F349) Ignition Switch Cover Cable Tie (50# x 7") Power Lead Wire, Body Wire Clip, Self-Mount Safety Switch Riser Plate Grommet Jumper Wire Red Indicator Lens (Includes Item # 12) Indicator Bulb (Replacement for P/N 8996) Oil Pressure Light Assembly (Includes Items # 11 & 12) Hourmeter Power Lead Wire Hourmeter Hourmeter Ground Wire Relay Switch (30/40 Amp) Circuit Breaker (5 Amp) (Includes Item # 19) Boot, Circuit Breaker Key Tip Protector Use only genuine Walker® replacement parts. 34 PART NO. DESCRIPTION NO. REQ’D Fasteners Electrical Assemblies (Body Components) 1 2 ITEM NO. F002 F025 F026 F349 1 1 1 3 1 1 1 1 1 1 1 * 10-24 Keps Nut 10-24 x 3/8 PPHMS 10-24 x 1/2 PPHMS Washer .835 ID 1.122 OD, SS 4 3 1 1 Service Part Only NOTE: Refer to ELECTRICAL CONNECTORS, Page 40 for identification of all Electrical Wiring Service Parts. * 1 1 1 1 2 1 1 1 Effective Date 12-01-00 ELECTRICAL ASSEMBLIES (BODY COMPONENTS) Effective Date 12-01-00 Use only genuine Walker® replacement parts. 35 ELECTRICAL ASSEMBLIES (GHS 6.7 BUSHEL COMPONENTS) ITEM NO. PART NO. DESCRIPTION NO. REQ’D Horn & Powerfil® Wiring Assemblies 1 2 3 4 5 6 7 8 9 5599 5857 5975-3 5536-2 5984 5982-2 5982-1 5985-2 5988-1 5988-4 Pigtail Wire Set, Horn Wire Clamp (1/8 J-Clip) Cable Tie (50# x 7") Horn, Full Signal Electric Contact Spring Insulator Bushing, Plastic Insulator Washer, Plastic (2") Power Lead Wire, Catcher Conduit Assembly, Powerfil® Wiring Powerfil® Tube & Wire Assembly (Includes Item # 8) 14 5833 5980-3 5592-11 5592-10 5592-4 5594-5 Cable Clamp (1/4) Wire, Grass-Pak® Switch Liquid Tight Plug Grass-Pak® Switch Module Grass-Pak® Switch Assembly (Includes Items # 3 & 10-14) Vane Assembly, Grass-Pak® Switch (Includes Items # F144 & F145) Use only genuine Walker® replacement parts. 36 PART NO. DESCRIPTION NO. REQ’D Fasteners F002 F025 F037 F085 F086 F129 F144 F145 F147 F148 1 1 2 * 2 1 1 1 1 * * Grass-Pak® Switch Assembly 10 11 12 13 ITEM NO. 2 1 1 1 10-24 Keps Nut 10-24 x 3/8 PPHMS 10-24 x 5/8 PTH Screw 3/16 Rivet Backup Washer #10 SAE Washer 10-24 x 1/2 PTHMS 4-40 x 1/4 PPHMS 4-40 Keps Nut 10-24 x 1/2 PPHMS SS 10-24 x 3/8 PPHMS SS 11 1 1 1 1 3 1 1 3 3 Service Part Only NOTE: Refer to ELECTRICAL CONNECTORS, Page 40 for identification of all Electrical Wiring Service Parts. * 1 1 1 Effective Date 12-01-00 ELECTRICAL ASSEMBLIES (GHS 6.7 BUSHEL COMPONENTS) Effective Date 12-01-00 Use only genuine Walker® replacement parts. 37 ELECTRICAL ASSEMBLIES (GHS 9.5 BUSHEL COMPONENTS) ITEM NO. PART NO. DESCRIPTION NO. REQ’D 5599 5976 5975-3 5536-2 8117 Pigtail Wire Set, Horn Grommet (3/8 ID x 11/16 OD) Cable Tie (50# x 7") Horn, Full Signal 9.5 Wire Harness Channel F002 F025 F037 F079 F085 F129 F144 F145 1 2 2 * 1 Harness & Grass-Pak® Switch Assemblies 6 7 8 9 10 11 12 13 14 15 5833 5977-2 8950-1 7835 7834 8950 5980-3 5592-11 5592-10 5592-4 5594-5 Cable Clamp (1/4) Grommet, Cut (1/8 x 3/8) Extension Wire 9.5 Catcher Frame Clip Nylon Clamp Wire Harness, 9.5 Catcher Wire, Grass-Pak® Switch Liquid Tight Plug Grass-Pak® Switch Module Grass-Pak® Switch Assembly (Includes Items # 3, 6 & 12-15) Vane Assembly, Grass-Pak® Switch (Includes Items # F144 & F145) Use only genuine Walker® replacement parts. 38 PART NO. DESCRIPTION NO. REQ’D Fasteners Horn & Harness Channel Assemblies 1 2 3 4 5 ITEM NO. 4 2 1 2 4 1 1 1 1 * 10-24 Keps Nut 10-24 x 3/8 PPHMS 10-24 x 5/8 PTH Screw A/A66D Aluminum Pop Rivet 3/16 Rivet Backup Washer 10-24 x 1/2 PTHMS 4-40 x 1/4 PPHMS 4-40 Keps Nut 10 1 3 4 4 6 1 1 Service Part Only NOTE: Refer to ELECTRICAL CONNECTORS, Page 40 for identification of all Electrical Wiring Service Parts. * 1 1 1 Effective Date 12-01-00 ELECTRICAL ASSEMBLIES (GHS 9.5 BUSHEL COMPONENTS) Effective Date 12-01-00 Use only genuine Walker® replacement parts. 39 ELECTRICAL CONNECTORS ITEM NO. PART NO. DESCRIPTION NO. REQ’D Electrical Wiring Service Parts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 5996-1 5996-4 5996-5 5940-4 5940-7 5996 5996-2 7996 5940-5 5996-0 7996-1 5996-8 5996-9 5996-10 5996-12 5996-13 5996-15 5996-16 5996-17 5996-20 5996-21 7942-4 8942 7942-1 16-14 GA Butt Conn. 16-14 GA Bullet Conn., Male 16-14 GA Bullet Conn., Female 16-14 GA Spg. Loaded Term., Female Brass Wire Clip, Female 1/4 x 16-14 GA QKS Term., Female 3/16 x 22-18 GA QKS Term., Female 16-14 GA QKS Term., .187 (Female) 16-14 GA Spg. Loaded Term., Male 1/4 x 22-18 GA QKS Term., Male 1/4 x 16-14 GA QKS Term., Male 6 GA Ring Lug (5/16) 22-18 GA Ring Term., #10 16-14 GA Ring Term. (5/16) 12-10 GA Ring Term. (5/16) 16-14 GA Ring Term., #10 12-10 GA Ring Term. (1/2) 6 GA Ring Terminal (1/4) 16-14 GA Ring Term. (1/4) 12-10 GA Ring Term. (1/4) 12-10 GA Ring Term., #10 Single Connector, Male 2-Way Connector, Male 2-Way Locking Connector, Female Use only genuine Walker® replacement parts. 40 * * * * * * * * * * * * * * * * * * * * * * * * ITEM NO. PART NO. 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 7942-2 7942-3 7942-10 5940-8 7942-9 8944 8944-1 7942-11 7942-12 7942-5 5940-2 8942-1 7942-6 7942-7 7942-8 8942-2 8942-3 * DESCRIPTION NO. REQ’D 2-Way Connector, Male 2-Way Connector, Female 2-Way Locking Connector, Male 3-Way Connector, Male 3-Way Connector, Male 3-Way Locking Connector, Male 3-Way Locking Connector, Female 4-Way Connector, Male 4-Way Connector, Female 5-Way Connector, Male 5-Way Connector, Male 5-Way Connector, Female 6-Way Connector, Male 6-Way Connector, Male 8-Way Connector, Male 8-Way Connector, Female 5-Way Connector, Male * * * * * * * * * * * * * * * * * Service Part Only NOTE: Not all Electrical Connectors are used with all assemblies. NOTE: Refer to ELECTRICAL ASSEMBLIES, Pages 32-39 for locations of Wiring Harness, Electrical Components and of all Electrical Wiring Service Parts. Effective Date 12-01-00 ELECTRICAL CONNECTORS Effective Date 12-01-00 Use only genuine Walker® replacement parts. 41 ARMREST KIT / TOUCH-UP PAINT ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 5885 Armrest Option / Kit Includes Items # 1-5, fasteners listed and instructions. May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. 1 2 3 4 5 5886-1 5886-3 5887 5886-4 5886-2 5888 Armrest, RH 1 Cover Plate, RH 1 Mounting Bracket 1 Cover Plate, LH 1 Armrest, LH 1 Armrest Hardware Kit * (Includes Items # F305, F306, F307 & F308) ITEM NO. 42 DESCRIPTION NO. REQ’D Touch-Up Paint 6 7 8 9 10 11 5866 5871 5871-1 5867 5873 5873-1 Touch-Up Paint, Yellow (12 oz. Aerosol) Touch-Up Paint, Yellow (1 qt.) Touch-Up Paint, Yellow (1 gal.) Touch-Up Paint, Grey (12 oz. Aerosol) Touch-Up Paint, Grey (1 qt.) Touch-Up Paint, Grey (1 gal.) Fasteners F305 F306 F307 F308 * Use only genuine Walker® replacement parts. PART NO. 1/4-20 x 3/8 SH Cap Screw 3/8-16 x 3/4 Hex Bolt #10 x 5/8 PPHST Screw 1-1/4 x 1-5/8 Wave Spring Washer 2 4 2 2 Service Part Only Effective Date 12-01-00 ARMREST KIT / TOUCH-UP PAINT Effective Date 12-01-00 Use only genuine Walker® replacement parts. 43 COMFORT SEAT / ARMREST KIT ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 6103-5 Comfort Seat Option / Kit (Grey) Includes Items # 1, 6, fasteners listed (except as indicated; refer to NOTE) and instructions. May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. 1 2 3 4 5 6 7 8 6103-5 7203 7223 7845 7846 7203-6 7204 7440-5 Comfort Seat Seat Spring Plate Compression Spring (1/2 x 1) Rubber Bumper (1.375 OD x .63) Rubber Washer (3/8 ID x 1-1/4 OD x 1/8) Riser Plate Shoulder Bolt, Seat Mount Shock Mount (1.25 D x .75) 1 1 2 2 2 ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 6103-15 Armrest Option / Kit Includes Items # 9, 10 and instructions. Item # 9 is the Right side armrest only. Item # 10 is the Left side armrest only. Sold only as a complete set and may be ordered together as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. 9 10 NS NS Armrest, Right Side Armrest, Left Side 1 1 5/16 - 18 Whiz Locknut 10-24 x 1/2 PPHMS 3/8-1-1/4 x 1/8 Plastic Washer 2 2 2 Fasteners * F009 F026 F227 2 2 * Only one Riser Plate is included with kit. One is reused from Seat Switch. Refer to ELECTRICAL ASSEMBLIES (BODY COMPONENTS), Page 34. NOTE: Reuse Items # 3-8, F009 and F227 from Seat Assembly. Refer to BODY / CHASSIS ASSEMBLY (GHS MODELS), Page 4. Use only genuine Walker® replacement parts. 44 Effective Date 12-01-00 COMFORT SEAT / ARMREST KIT Effective Date 12-01-00 Use only genuine Walker® replacement parts. 45 SUSPENSION SEAT KIT ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 6103-25 Suspension Seat Option / Kit Includes Items # 1-3, 5-7, 11, 14, fasteners listed (except as indicated; refer to NOTE) and instructions. May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 6103-11 5941-5 6103-33 7223 5975-3 5975-1 6103-23 7846 7204 5977-6 5841 7845 7440-5 6103-34 Suspension Seat Safety Switch (Normal Open) Seat Mount Plate, LH Compression Spring Cable Tie (50# x 7") Cable Tie (18# x 3-3/4") Wire Harness, S/C/T Suspension Seat Rubber Washer 3/8 x 1-1/4 x 1/8 Shoulder Bolt, Seat Mount Grommet (1 x 1-1/4) Retainer Washer Rubber Bumper (1.375 x 0.63) Shock Mount (1.25 x 0.75) Seat Mount Plate, RH Use only genuine Walker® replacement parts. 46 ITEM NO. DESCRIPTION NO. REQ’D Fasteners F002 F009 F026 F168 F227 F357 F358 1 * 1 2 2 1 1 2 2 2 2 2 2 1 PART NO. * 10-24 Keps Nut 5/16-18 Whiz Locknut 10-24 x 1/2 PPHMS 5/16 Split Lock Washer 3/8 x 1-1/4 x 1/8 Washer (Plastic) M8 x 16 Hex Bolt M8 x 25 Hex Bolt 4 6 4 4 2 2 2 Only one Safety Switch is included with kit. One is reused from Electrical Assembly. Refer to ELECTRICAL ASSEMBLIES (BODY COMPONENTS), Page 34. NOTE: Reuse Items # 4, 8-10, 12, two (2) each of Items # F002, F009 and F026, and Item # F227 from Seat Assembly. Refer to BODY / CHASSIS ASSEMBLY (GHS MODELS), Page 4. Effective Date 12-01-00 SUSPENSION SEAT KIT Effective Date 12-01-00 Use only genuine Walker® replacement parts. 47 LIGHT KIT ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 5989 Light Option / Kit Includes Items # 1-10, fasteners listed and instructions. May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. 1 5989-2 2 3 4 5 6 7 8 9 5989-6 7834-1 5977-1 5975-5 5975-1 6940-10 5995 5995-2 7995-3 10 7992 Light Assembly (Includes Sealed Beam Lamp) Sealed Beam Lamp (Fits P/N 5989-2) Half U-Wire Clip Grommet (1/8 x 3/8) Wire Clip, Self-Mount Cable Tie (18# x 3-3/4") Jumper Wire Toggle Switch (Off-On) Switch Boot Power Lead Wire Assembly (Lights) (Includes Item # 5) Mount Bracket, Lights Use only genuine Walker® replacement parts. 48 ITEM NO. PART NO. DESCRIPTION NO. REQ’D 5/16-18 Whiz Locknut 5/16-18 x 5/8 Hex Bolt AN960816L Washer 2 2 2 Fasteners F009 F091 F134 2 * Service Part Only * 4 2 3 1 1 1 1 1 NOTE: Upon installation of kit, Item # 3 replaces P/N 5989-4 (Dome Plug, 3/8), Item # 5 replaces P/N 5989-5 (Dome Plug, 7/16), and Item # F091 replaces P/N 5989-3 (Dome Plug, 5/16). Dome Plugs are not shown here. Refer to BODY / CHASSIS ASSEMBLY (GHS MODELS), Page 4. NOTE: Refer to ELECTRICAL CONNECTORS, Page 40 for identification of all Electrical Wiring Service Parts. 1 Effective Date 12-01-00 LIGHT KIT Effective Date 12-01-00 Use only genuine Walker® replacement parts. 49 CASE-HARDENED BLOWER KIT ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 6542-15 Case Hardened Blower Option / Kit Includes Items # 1-5, fasteners listed and instructions. May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. 1 2 3 4 5 5268 NS 6545-15 6525-2 6526 Bearing (3/4) Includes Locking Collar Blower Housing (10") HT Blower Wheel (10") HT Faceplate (10" Blower) Intake Tube (6-1/2 x 2-1/2) Use only genuine Walker® replacement parts. 50 ITEM NO. PART NO. DESCRIPTION NO. REQ’D 1/4-20 Keps Nut 1/4-20 x 3/8 Set Screw 6 2 Fasteners F004 F074 2 1 1 1 1 Effective Date 12-01-00 CASE-HARDENED BLOWER KIT Effective Date 12-01-00 Use only genuine Walker® replacement parts. 51 NO CATCH DEFLECTOR KIT (6.7 BUSHEL) ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 5500 No Catch Deflector Option / Kit (6.7 Bushel) Includes Items # 1-10, fasteners listed and instructions. May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. 1 2 3 8500-5 8787-2 5500 4 5 6 7 8 9 10 5726-10 8500-8 8500-6 5500-8 5995 8500-9 5995-2 Side Bracket Deflector Knob 6.7 Deflector Assembly (Includes Items # 4 & F340) Hinge, No-Catch (6.7 / 7.0) Decal, No Catch Deflector Spacer Lug Wire Assembly, 6.7 No Catch Deflector Toggle Switch (Off - On) Decal, Off - On Switch Boot Use only genuine Walker® replacement parts. 52 2 1 1 2 1 1 1 1 1 1 ITEM NO. PART NO. DESCRIPTION NO. REQ’D Fasteners F002 F030 F128 F146 F333 F340 10-24 Keps Nut 1/4-20 x 1/2 PPH Bolt 10-24 x 3/8 PTHMS 1/4-20 Jam Nut 1/4-20 x 3/4 PTHMS Rivet, Aluminum 4 1 4 1 1 20 NOTE: Refer to ELECTRICAL CONNECTORS, Page 40 for identification of all Electrical Wiring Service Parts. Effective Date 12-01-00 NO CATCH DEFLECTOR KIT (6.7 BUSHEL) Effective Date 12-01-00 Use only genuine Walker® replacement parts. 53 NO CATCH DEFLECTOR KIT (9.5 BUSHEL) ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 8500 No Catch Deflector Option / Kit (9.5 Bushel) Includes Items # 1-6, fasteners listed and instructions. May be ordered as a factory-installed option or as a kit for dealer installation. Contact your Walker dealer. 1 2 8500-5 8500-1 3 4 5 6 8787-2 7726-10 8500-8 8500-6 Side Bracket Deflector Assembly (9.5) (Includes Items # 4 & F340) Deflector Knob Hinge, No-Catch (9.5) Decal, No Catch Deflector Spacer Lug Use only genuine Walker® replacement parts. 54 2 1 ITEM NO. PART NO. DESCRIPTION NO. REQ’D Fasteners F002 F030 F128 F146 F333 F340 10-24 Keps Nut 1/4-20 x 1/2 PPH Bolt 10-24 x 3/8 PTHMS 1/4-20 Jam Nut 1/4-20 x 3/4 PTHMS Rivet, Aluminum 4 1 4 1 1 24 1 2 1 1 Effective Date 12-01-00 NO CATCH DEFLECTOR KIT (9.5 BUSHEL) Effective Date 12-01-00 Use only genuine Walker® replacement parts. 55 ALL-TERRAIN TIRE KIT & TIRE CHAIN SETS ITEM NO. PART NO. DESCRIPTION NO. REQ’D Kit 8072 All-Terrain Tire Option / Kit Includes Items # 1-3 and instructions. May be ordered as a factory installed option, or as a kit for dealer installation. Contact your Walker dealer. 1 8070 2 3 8070-1 8070-2 8070-31 8071 All-Terrain Wheel & Tire, RH (18 x 11.00-10) AT Tire Only (18 x 11.00-10) AT Wheel Only (10 x 8.5) Wheel Spacer Plate (1/2) All-Terrain Wheel & Tire, LH (18 x 11.00-10) ITEM NO. PART NO. DESCRIPTION NO. REQ’D Optional Tire Chain Sets Includes Items # 2 and 4. Tire Chain Sets are not for use on AllTerrain Tires. Use only with tires listed at Item # 4. Refer also to BODY / CHASSIS ASSEMBLY (GHS MODELS), Page 4. 4 1 * * 5675-2 5675 2 1 Tire Chain Set (18 x 8.50-8) 1 (Includes Item # 2) (For use with Wide Wheel & Tire Assy) Tire Chain Set (18 x 6.50-8) 1 (Includes Item # 2) (For use with Optional Narrow Drive Tires) Fasteners F157 * 1/2-20 x 1-1/4 Wheel Lug Bolt 8 Service Part Only NOTE: Reuse Item # F157 from Wheel & Tire Assembly. Refer to BODY / CHASSIS ASSEMBLY (GHS MODELS), Page 4. Use only genuine Walker® replacement parts. 56 Effective Date 12-01-00 ALL-TERRAIN TIRE KIT & TIRE CHAIN SETS Effective Date 12-01-00 Use only genuine Walker® replacement parts. 57 LUBRICATION POINTS ITEM NO. LOCATION LUBRICATION TYPE NO. PLACES Lubrication Points 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Deck Caster Wheel Fork Pivot Deck Caster Wheel Bearing Tee Gearbox, Deck Blade Drive Gearbox PTO Shaft Guard Hinge Universal Joint Shaft Assembly Pivot Assembly, Tilt-Up Deck Deck Support Arm Socket Body Hinge Point FSC Actuator Rod Pivot Pins FSC Lever Pivot FSC Lever Fork (Grease Slide Area) (FSC) Friction Body Pivot Steering Lever Pivot Deck Roller Wheel Deck Support Arm Pivot Deck-to-PTO Coupling (Grease Slide Area) Universal Joint Tube Assembly Universal Joint Quick Connect Spline (Grease Slide Area) Parking Brake Lever Gear Axle Belt Tightener Pivot, Jackshaft Drive Clutch Actuator Push Rod PTO Clutch Lever Pivot Belt Tightener Pivot PTO Clutch Brake Actuator Rod and Brake Band Pivot Pins (Clevis) Brake Actuator Pivot Grease Grease Oil* Oil* Oil Grease** Grease Grease Oil Oil Grease Grease 2 2 1 2 1 1 4 2 2 2 1 1 Grease Grease Oil Grease Grease 1 4 2 2 1 Grease** Grease 1 1 Grease Oil*** Grease 1 2 1 Grease Grease Grease Oil*** 2 1 1 3 Grease 1 28 29 30 31 32 33 34 35 36 37 38 39 40 41 * LOCATION LUBRICATION TYPE Anti-Scuff Roller Wheel Catcher Hinge Point Engine Oil Choke Control Cable Ends Throttle Control Cable Ends Belt Tightener Pivot, Blower Drive (GHS Models Only) Belt Tightener Pivot, Ground Drive PTO Gearbox Dipstick Hydrostatic Drive Choke Control Pivot Throttle Control Pivot Discharge Chute Hinge Tilt-Up Latch Assembly Steering Lever Support NO. PLACES Oil Oil Oil*** Oil Oil Grease 2 2 1 2 2 1 Grease 1 Oil Oil*** Oil Oil Oil Oil Oil 1 2 1 1 1 1 1 Gearboxes are permanently lubricated and sealed requiring no scheduled lubrication. Oil level should be checked only when an oil leak is noted. ** Grease every eight (8) hours. *** See Owner’s Manual for procedure for checking and chang- Use only genuine Walker® replacement parts. 58 ITEM NO. ing oil in Engine Crankcase, Hydrostatic Transmissions, and Gear Axles. NOTE: See Model MC Owner’s Manual (P/N 6000-1) for proper lubrication intervals. NOTE: DGHS42 Tilt-Up Deck is shown for reference. For other Deck Lubrication Points, refer to Deck and Carrier Frame Illustrated Parts Manual. Effective Date 12-01-00 LUBRICATION POINTS Effective Date 12-01-00 Use only genuine Walker® replacement parts. 59 WIRING SCHEMATIC Use only genuine Walker® replacement parts. 60 Effective Date 12-01-00 LIMITED WARRANTY FOR WALKER COMMERCIAL RIDER MOWER 1. WHAT THIS WARRANTY COVERS, AND FOR HOW LONG: Walker Manufacturing company will, at its option, repair or replace, without charge, any part covered by this warranty which is found to be defective in material and/or workmanship within one (1) year* after date of sale to the original retail purchaser unless the product is used for rental purposes, in which case this warranty is limited to ninety (90) days. At Walker's request, customer will make the defective part available for inspection by Walker and/or return the defective part to Walker, transportation charges prepaid. All parts and components of the Walker Mower are covered by this warranty except the following components which are warranted separately by their respective manufacturers: Kohler Engine Kubota Engine Kawasaki Engine Eaton Hydraulic Transmission Peerless Gearboxes Battery Tires The available warranties covering these items are furnished with each mower. Walker does not assume any warranty obligation, liability or modification for these items, which are covered exclusively by the stated warranty of the respective manufacturers noted above. * An extended three (3) year warranty is offered on the Walker P/N 6200-7 Gear Axle Assembly. 2. 3. WHAT THIS WARRANTY DOES NOT COVER: A. This warranty does not cover defects caused by depreciation or damage caused by normal wear, accidents, improper maintenance, improper use or abuse of the product, alterations, or failure to follow the instructions contained in the Owner’s Manual for operation and maintenance. B. The customer shall pay any charges for making service calls and/or for transporting the mower to and from the place where the inspection and/or warranty work is performed. HOW TO OBTAIN SERVICE UNDER THIS WARRANTY: Warranty service can be arranged by contacting the dealer where you purchased the mower or by contacting Walker Manufacturing Company, 5925 East Harmony Road, Ft. Collins, CO 80528. Proof of the date of purchase may be required to verify warranty coverage. 4. WARRANTY LIMITATION: A. THERE IS NO OTHER EXPRESS WARRANTY. ANY WARRANTY THAT MAY BE IMPLIED FROM THIS PURCHASE INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IS HEREBY LIMITED TO THE DURATION OF THIS WARRANTY AND TO THE EXTENT PERMITTED BY LAW ANY AND ALL IMPLIED WARRANTIES ARE EXCLUDED. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. B. WALKER WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES AND/OR EXPENSES IN CONNECTION WITH THE PURCHASE OR USE OF THE MOWER. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation(s) or exclusion(s) may not apply to you. C. Only the warranty expressed in this limited warranty shall apply and no dealer, distributor, or individual is authorized to amend, modify, or extend this warranty in any way. Accordingly, additional statements such as dealer advertising or presentations, whether oral or written, do not constitute warranties by Walker, and should not be relied upon. D. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 61 WALKER MFG. CO. • 5925 E. HARMONY ROAD, FORT COLLINS, CO 80528 • (970) 221-5614 FORM NO. 030501 www.walkermowers.com PRINTED IN USA ©2001 WALKER MFG. CO
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2001:03:05 10:50:18Z Modify Date : 2001:05:15 22:06:16-04:00 Page Count : 64 Creation Date : 2001:03:05 10:50:18Z Producer : Acrobat Distiller 4.05 for Windows Author : Station-08 Mod Date : 2001:05:15 22:06:16-04:00 Metadata Date : 2001:05:15 22:06:16-04:00 Creator : Station-08 Title : mc parts 12012000.book Page Layout : TwoColumnRightEXIF Metadata provided by EXIF.tools