Wanstonic Electronics WBT310-RX Home Stereo Receiver with Bluetooh User Manual

Wanstonic Electronics Ltd. Home Stereo Receiver with Bluetooh Users Manual

Users Manual

Download: Wanstonic Electronics WBT310-RX Home Stereo Receiver with Bluetooh User Manual
Mirror Download [FCC.gov]Wanstonic Electronics WBT310-RX Home Stereo Receiver with Bluetooh User Manual
Document ID588562
Application IDyI8Hagk9K1Uh2WY8feqMRg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize16.31kB (203898 bits)
Date Submitted2005-10-04 00:00:00
Date Available2005-10-04 00:00:00
Creation Date2005-10-03 11:00:33
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2005-10-03 11:00:33
Document TitleMicrosoft Word - WBT310 User Manual - ENG_06-29_.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: elisa_chen

Stereo Audio Kit
(WBT310 Home Receiver )
User Manual
Version 1.0
PALM GARDEN ENTERPRISES CORP..
Copyright © 2005. All rights reserved
PALM GARDEN
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause
undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions
for satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
PALM GARDEN
Bluetooth Introduction
Bluetooth is a global wireless standard for enabling short-range wireless
connections. It is a simple and instant radio solution that allows different
devices to talk to one another. Bluetooth eliminates the need for
cables/wires/cords between devices such as mobile phones and headphones.
Bluetooth facilitates fast and secure transmissions of both voice and data
between devices even if they are not in line-of-sight. Most Bluetooth devices
are described as 'Class 2'. These are very low power and have a range of
about 10 meters. Some devices are Class 1. These have range comparable to
that of Wi-Fi and have a range up to 100 meters.
A limited, but growing number of devices use Bluetooth at present. Devices
that are starting to have Bluetooth connectivity built in include:
•
•
•
•
•
•
•
•
•
•
•
•
Headsets
Headphone
Cell Phones
PDAs
Laptops
Digital cameras and camcorders
Printers
Scanners
Keyboards and Mice
In-car handsfree kits
GPS navigation receivers
Home appliances (microwaves, washers, driers, refrigerators)
In addition, add on Bluetooth adapters are available for computers (i.e. with a
USB interface) and for PDAs.
PALM DARDEN
Copyright © 2005. All rights reserved
Package List
The following checked items should be in the package.
Items
Quantity
Receiver Box (Home Received)
WANSTONIC Stereo Audio Kit
Thank you for choosing WANSTONIC Stereo Audio Kit. It is unique and
different from most Bluetooth products in the market for its good integration of
AV t Profiles.
Stereo RX Box Features
Superior audio quality - Delivers 44.1 kHz and 48 kHz, 16 bit stereo music
(near CD quality audio).
Listen to music and respond to phone calls – Enable switching between
music and calls made to your Bluetooth enabled cell phone.
Wireless mobility – It is very convenient without being restricted by cables.
No “Line-of-sight” restriction - Unlike infrared devices, it offers you a wide
transmission range (up to 10 meters).
Supported profiles - Supports A2DP, Headset and Handsfree profiles of
the Bluetooth specification.
PALM DARDEN
Copyright © 2005. All rights reserved
BluePacket Stereo Audio Kit Outline
LED indicator
Volume Down
Volume Up
Power On / Off
WBT310 (Home Received)
How to Use
BluePacket RX Box performs well with the Bluetooth TX dongle and can be
used to demonstrate the following usage scenarios:
Enjoying the superior music quality
Connect the TX dongle to PC or CD player, workman etc. Let the music
be streamed to the Stereo RX box. Users can also use another Bluetooth
enabled device that minimally supports the A2DP profile of the Bluetooth
specification, version 1.1 to play music. In this scenario the ability of the
RX box to pick up / drop phone calls is not utilized.
PALM DARDEN
Copyright © 2005. All rights reserved
Enjoying the Superior Music Quality
Before using the RX box to listen to music, you should make a music
connection as follows:
1. Setting Up Music Source
Please make sure you have plugged in the music source rightly to TX dongle.
2.Connecting AV dongle / RX box
(1) Turn on the RX box. Meanwhile, you can hear the opening sound from the
earphone or speaker.
(2) The TX dongle and the RX box will be paired automatically after a few
seconds.
(3) When the pairing is done, the LED indicator on the RX box will start
flashing.
(4) Play music from computer or music Player.
(5) You can hear music from the RX box.
*Note:
1. It may take you a few seconds in paring RX box with AV dongle for the first
time. It will be quicker in searching after that.
2. During the pairing mode, the status LED indicator onTX dongle will flash
quickly. When the pairing is done, the LED indicator onTX dongle will flash
slowly and steadily.
3.Turning Off
(1) If you don’t want to use the RX box, turn off the RX box by the power
switch.
(2) Unplug of the TX dongle or turn off the power switch.
PALM DARDEN
Copyright © 2005. All rights reserved
Specification
Product Name
BluePacket Bluetooth Receiver
Photo
Standard
Bluetooth 1.2 compliant
Power Class
Class 2
Frequency Band
2.402~2.480 GHZ unlicensed ISM band
Profile Supported
A2DP, Headset and Hands Free Profiles
Audio Format
SBC
Memory
8M flash external memory
Rx Sensitivity
< 0.1% BER at -86 dBm
RF Output Power
-6dBm to 4 dBm
Sampling Rate
48 KHz
SNR
<90dB
Antenna
embedded antenna
Working Distance
Up to 10 meters (in open space)
Note: The maximum operating range depends on
the paired phone model, battery power, and
environmental factors.
Power Supply
3 AA Batteries (1.5V x 3)
Operating Temperature -10 ℃ ~ +55 ℃
Dimensions
84mm (L)x 64mm (W)x 28mm(H)
Antenna: 98mm(H)
Weight
Around 30 grams
PALM DARDEN
Copyright © 2005. All rights reserved
FAQ
1. Q : How do I know that the battery of the AV dongle have insufficient
power?
A : The battery power is almost exhausted when one or more following
scenarios happen:
(1) The RX box starts to reset automatically.
(2) You can constantly hear breaks on the audio link, or
(3) You cannot connect the RX box to the AV dongle after several tries.
2. Q : Why cannot I create a connection to the RX box?
A:
(1) Verify that the battery power of RX box is not running low.
(2) Verify that the RX box is within the specified range of 10 meters from the
audio source.
(3) Check if any other Bluetooth device has connected to the RX box. If RX
box is connected with other devices, the indicator LED on the RX box will
flash slowly.
(4) Turn both the RX box and unplug the AV dongle. Power on the RX box on
and then power on the audio source and try connecting again.
3. Q : Why do I hear beep from the RX box?
A: The beep means the RX box is in the low power status. The RX box will
beep every 20 seconds to remind you to charge it. Meanwhile, the charging
LED indicator is flashing.
5. Q : How do I know the maximum and minimum volume?
A: You can hear beep if you adjust the volume up key to the maximum. If you
adjust the volume down key to the minimum, you can also hear beep.
PALM DARDEN
Copyright © 2005. All rights reserved
Technical Support
If you have further questions, please contact our Technical Support Department.
Thank you!
PALM DARDEN
Copyright © 2005. All rights reserved

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2005:10:03 11:00:33+08:00
Modify Date                     : 2005:10:03 11:00:33+08:00
Page Count                      : 9
Creation Date                   : 2005:10:03 03:00:33Z
Mod Date                        : 2005:10:03 03:00:33Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : elisa_chen
Metadata Date                   : 2005:10:03 03:00:33Z
Creator                         : elisa_chen
Title                           : Microsoft Word - WBT310 User Manual - ENG_06-29_.doc
EXIF Metadata provided by EXIF.tools
FCC ID Filing: S76-WBT310-RX

Navigation menu