Watchguard Technologies Wireless Office Headset Firebox X5W Users Manual X Edge De Manufacturing Instructions

Firebox X5W to the manual 7eadc181-b503-4572-b7c9-2843399318df

: Watchguard-Technologies Watchguard-Technologies-Watchguard-Technologies-Wireless-Office-Headset-Firebox-X5W-Users-Manual-454227 watchguard-technologies-watchguard-technologies-wireless-office-headset-firebox-x5w-users-manual-454227 watchguard-technologies pdf

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

Design for Manufacturing and Environment Document

EDGE Wireless
De-manufacturing
Instructions
\

Document Number: 480-2521-001

WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 1 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system

Design for Manufacturing and Environment Document

1.0 Purpose
This instruction defines the de-manufacturing process for the recovery of this product
family as it pertains to recycling of the major product components.
2.0 Scope
This instruction applies to the following product family and family part numbers.
Product Family Name
Family part #’s (not necessarily inclusive)
Firebox X Edge Wireless
• Firebox X5W; all revisions
• Firebox X15W; all revisions
• Firebox X50W; all revisions

WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 2 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system

Design for Manufacturing and Environment Document

3.0 Instruction
3.1 -Remove wireless antenna and antenna hardware
Material removed (P/N
& material type)

Instruction visual

Antenna
1305-002 - TPE, PC,
reverse SMA connector, RG178 coaxial cable; 2.4Ghz; 2
ea.

Remove antenna by
unscrewing from chassis
post, 2 sides

Post cover
1366-001- Rubber Santoprene 10155A
Washer
No p/n - Gold plated brass
Nut
No p/n - Gold plated brass

Remove post cover and
hardware; 2 sides

3.2 -Remove labels, rubber feet and screw, and separate top from bottom
WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 3 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system

Design for Manufacturing and Environment Document

Material removed (P/N
& material type)
Labels
Cert. label:
1791-0xx – Metalized
poly-film
Serial number:
1789-00x – Poly-film
Transmit Cert/FCC/CE:
2111-00x – Metalized
Poly-film
Made in Taiwan (if appl):
1794-00x - Metalized
poly-film
CM identifier:
No p/n – Poly-film

Instruction visual

Remove rubber feet

Remove labels

Rubber Feet
1422-002 - Polyurethane
Remove screw
2130-002 - Torx pin-head
security screw; stainless
steel

Remove screw,
security head

Separate top from bottom

WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 4 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system

Design for Manufacturing and Environment Document

3.3 – Remove serial connector standoffs
Material removed (P/N
& material type)

Instruction visual

Stand-offs
No p/n – Hex-head;
stainless steel

Remove stand-offs

3.4 – Remove bezel from unit top - depress tabs to disengage; remove light pipe
from bezel
Material removed (P/N
& material type)

Instruction visual

Painted metal enclosure
1768-001 - 22Ga. EG
w/powder coat (Interpon 700
-epoxy/polyester)
Light-pipe
1587-001 - PC
Bezel
1590-001 - PC/ABS

Depress tabs to
disengage
Remove light pipe; clear PC

WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 5 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system

Design for Manufacturing and Environment Document
3.5 –Remove battery; remove screws and separate main PCBA from chassis
bottom
Material removed (P/N
& material type)

Instruction visual

Battery –coin cell
0301-001– Manganese
oxide / Lithium CR2032

Remove battery from clip

Remove screws
0863-002 - Phillips head,
stainless steel, 4 ea.

Remove PCBA screws -4 ea.

Separate PCBA from
chassis bottom

3.6 –Remove insulator shields from bottom chassis
WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 6 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system

Design for Manufacturing and Environment Document

Material removed (P/N
& material type)

Instruction visual

Painted metal enclosure;
chassis bottom
1769-001 - 22Ga. EG
w/powder coat (Interpon 700
-epoxy/polyester)
Insulator shields
1780-001 - Insulator,
31.3mm round, Mylar, 2 ea.
1767-001 - Insulator,
42x221mm, Mylar, 1 ea.

Remove EMI shields

3.7 –Bend RF PCBA clip (up) and remove RF PCBA from main PCBA
Material removed (P/N
& material type)

Instruction visual

Main PCBA
1724-001 - Printed circuit
assembly

Remove RF PCBA
by pulling out

Release connector, 2 sides

Bend clip up

3.8 –Disconnect RF cables from RF PCBA
WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 7 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system

Design for Manufacturing and Environment Document
Material removed (P/N
& material type)

Instruction visual

RF PCBA
1771-001 - RF PCBA
RF Cable
1772-001 - Coaxial cable
assembly. 6cm

Remove RF Cables from
RF PCBA

RF Cable
1772-002 - Coaxial cable
assembly. 19.5cm

4.0 Applicable Documents
5.0 Revision History
REV.
NO.
A

REV. DATE

10/10/2005

REVISED SECTION
n/a

REASON
Initial Release

ECO#
0712

WatchGuard Technologies.
Doc #480-2521-001 Rev. A
Page 8 of 8
Authorization and Revision History for this document is available in the WatchGuard ECO system



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Keywords                        : watchguard, firebox, edge, wireless, instructions
Create Date                     : 2005:10:10 13:46:06-07:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2005:11:07 09:57:11-08:00
Metadata Date                   : 2005:11:07 09:57:11-08:00
Format                          : application/pdf
Title                           : WatchGuard Firebox X Edge Wireless De-manufacturing Instructions
Creator                         : WatchGuard Technologies, Inc.
Description                     : WatchGuard Firebox X Edge Wireless De-manufacturing Instructions
Subject                         : watchguard, firebox, edge, wireless, instructions
Document ID                     : uuid:d4b8b604-0b02-4c31-adec-b5a9b1acd4ea
Instance ID                     : uuid:03c6cd4d-0ec6-4d79-9d8f-a9b844800cc7
Page Count                      : 8
Author                          : WatchGuard Technologies

EXIF Metadata provided by EXIF.tools