Wave Wireless AIRPRO-SE Data modem User Manual MPE and TX Power Settings
Wave Wireless Corporation Data modem MPE and TX Power Settings
Contents
- 1. User Manual Part 1
- 2. User Manual Part 2
- 3. MPE and TX Power Settings
MPE and TX Power Settings
ADDENDUM TO THE AIRPRO-SE USER MANUAL TRANSMITTER POWER SETTINGS The maximum output power allowed by FCC Rule Part 15 depends on power spectral density (PSD) at a given output power setting, on antenna gain, and on the amplitude of emission bandedge energy in restricted bands starting at 2483.5 MHz and 2390 MHz. Data Rate: 19.2 kB/s Frequency/Channel (MHz, Plan, Channel) Maximum Ouput Power 0 dBi 8 dBi 15 dBi 24 dBi 2401.868, P3, C1 (lowest) 2478.227, P3, C48 2479.851,P3, C49 2481.476,P3, C50 (highest) All others not listed 23 dBm 23 dBm 23 dBm 23 dBm 23 dBm 23 dBm 5 dBm not used not used 23 dBm 23 dBm 23 dBm 8 dBm 0 dBm 23 dBm 23 dBm 15 dBm 0 dBm not used 23 dBm Data Rate: 64 kB/s Frequency/Channel (MHz, Plan, Channel) Maximum Ouput Power 0 dBi 8 dBi 15 dBi 24 dBi 2404.468, P2, C1 (lowest) 2474.652, P1, C14 2478.552, P2, C20 2479.851,P3, C49 (highest) All others not listed 26 dBm 25 dBm 16 dBm 3 dBm 25 dBm 26 dBm 25 dBm not used 0 dBm 25 dBm 24 dBm 23 dBm not used not used 25 dBm Frequency/Channel (MHz, Plan, Channel) Maximum Ouput Power 0 dBi 8 dBi 15 dBi 24 dBi 2407.067, P1, C1 (lowest) 2472.053, P3, C7 (highest) All others not listed 27 dBm 25 dBm 28 dBm 26 dBm 23 dBm 27 dBm 24 dBm 15 dBm 24 dBm Frequency/Channel (MHz, Plan, Channel) Maximum Ouput Power 0 dBi 8 dBi 15 dBi 24 dBi 2411.446,P1, C1 (lowest) 2461.476, P1, C6 2472.107, P3, C4 (highest) All others not listed 25 dBm 26 dBm 8 dBm 28 dBm 8 dBm 17 dBm not used 24 dBm 26 dBm 25 dBm 0 dBm 8 dBm 25 dBm Data Rate: 128 kB/s 26 dBm 25 dBm 28 dBm Data Rate: 256 kB/s 23 dBm 26 dBm not used 28 dBm 23 dBm 23 dBm not used 27 dBm Compliance with RF Exposure Guidelines in FCC Rule para. 1.1307(b)1 The AIRPRO transmitter must meet the RF exposure requirements described in paragraph 1.1307(b)1 of FCC’s Rules. The specific requirement for a transmitter of this type is that the maximum permissible exposure level (MPE) meets the limits for “General Population/Uncontrolled Exposure “ (Table 1, para. 1.1310). The required MPE is 1.0 mW/cm2. For each antenna used with the AIRPRO transmitter, the antenna gain and maximum output power are used to calculate the distance from the antenna at which MPE is exceeded. The installer shall take all reasonable steps to maintain this separation distance between the antenna and personnel. Calculating Minimum Separation Distances to meet MPE Requirements E2/377 = S, W/m2 Specification: 1 mW/cm2 = 10 W/m2, Emax = 61.4 V/m Ev/m = (30*P*G)0.5 / d, P= power in watts, G = ant. gain over isotropic, d = distance, meters d = (30*P*G)0.5 /61.4 Ant Gain, dBi RF In, dBm 0.0 8.0 15.0 24.0 Minimum Dist, cm 28.0 28.0 27.0 24.0 7.1 17.8 35.5 70.9
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:07:16 11:18:27 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:07:16 11:18:28+01:00 Page Count : 2EXIF Metadata provided by EXIF.tools