Wavetrend Technologies TGF-A Active Duo RFID Tag TGF-A User Manual Manual

Wavetrend Technologies Limited Active Duo RFID Tag TGF-A Manual

Manual

© 2012 Wavetrend Europe Limited | All Rights Reserved | All specifications are subject to change without notice. Europe, Australasia and Middle East – Corporate Office USA, Canada and South America +44 (0)20 8614 7779 +1 (703) 539 8502 Key fob Tag TGF-A 0 The TGF Active Key fob can be operated in two modes both sleep and wake. Whilst awake both buttons operate and the tag has its standard beacon rate, when asleep both buttons operate and there is no beacon rate. The LED will flash once when button one which is closest to the LED is pressed and twice when button 2 is pressed in both Asleep and Awake settings. Personnel  Beacon tag transmitting a unique ID & data at pre-set intervals  Ultra long-range transmitter  Low battery warning  2 Push Button alarms  Flashing LED on Alarm  Replaceable Battery KEY FEATURES BUSINESS BENEFITS Tag can be configured to hold standard 26-bit Wiegand numbering Allows tag to be used with existing access control systems separately or together with the active RFID system. Configurable settings include: Site / Vendor ID Tag ID Various transmission repetition intervals (default 10s) Panic Button 1 Panic Button 2 Replaceable coin cell battery Flashing LED Sealed to IP50 standards A unique code that can be allocated by Wavetrend to each customer on request. Readers can be set to ignore tags with incorrect site codes. 4.2 billion tag ID’s are available per site code. Different status transmission intervals allow tags to be used in diverse applications while offering the best battery life spans in the market. Transmits Motion Alert Transmits Tamper Alert Lifespan at 30 seconds is 3 years Provides user visual confirmation that an alarm has been transmitted. Best Usage Guide
© 2012 Wavetrend Europe Limited | All Rights Reserved | All specifications are subject to change without notice. Europe, Australasia and Middle East – Corporate Office USA, Canada and South America +44 (0)20 8614 7779 +1 (703) 539 8502 Key fob Tag TGF-A The TGF-A Key fob tag can be used for both security and control purposes. In security applications it is often used awake with its beacon being used to locate personnel within and zone and to detect any alarms. In control applications the TGF tag can be combined with the RX211 access reader which when suitably configured can open either set of relays corresponding to either button 1 or button 2 being pressed on the TGF-A. Model Range The tag can be ordered using the part number listed below: L-Series TGF : Standard tag Ordering & Further Information For more information on purchasing the Activ TGF-A Tag please email Wavetrend’s Sales team: sales@wavetrend.net For more information on Wavetrend® visit our website. Specifications IP Information Wavetrend and the Wavetrend logo are either registered trademarks or trademarks of Wavetrend Technologies Limited in the United States and/or other countries. All other trademarks are the property of their respective owners. The product(s) described in this document are protected by various patents held by Wavetrend. Refer to the URL www.wavetrend.net/IPR for information on all patents and trademarks held, and for Wavetrend's Policy on Intellectual Property Rights. Typical Applications Environmental Operating temperature Storage temperature Humidity : -30°C to +60°C : -40°C to +70°C : 5% to 90% (non-condensing) Physical Size Weight Colour Material : 57 x 35 x 10 mm : 14 grams : Black : Nylon IP64 Radio Frequency Transmit Frequency Power Output (avg.) Range : 433.92 MHz : 77 dBV/m @ 3m : 1 to 100+ meters (actual range is determined by the choice of reader & antenna used to detect the tag and the environment it is used in) Electrical Power : Internally powered by Replaceable lithium battery FCC Statement of Conformity Wavetrend , TGFA Active Duo , FCC ID: 06XTGF-A This device complies with Part 15 of the FCC rules subject to the following three conditions: 1) This device may not cause harmful interference. 2) This device must accept all interference received, including interference that may cause undesired operation. 3) This device is for commercial use only and intended for use in a confined area with an appropriate system receiver Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu