Wavetronix SS105 Traffic Sensor User Manual

Wavetronix, LLC Traffic Sensor

Manual

     User Manual  Model: SmartSensorTM 105 10.525 GHz Microwave Traffic Sensor
Wavetronix, LLC    SmartSensor 105 User Manual 2                 FCC COMPLIANCE THIS EQUIPMENT COMPLIES WITH PART 15 OF THE FCC RULES.   ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.  Proprietary Copyright  Wavetronix, LLC. All rights reserved. Wavetronix products are covered under U.S. and foreign patents, issued and pending. Specifications change privileges reserved. SmartSensorTM is a register trademark of Wavetronix, LLC.  Technical Support and Product Information www.wavetronix.com 1-800-764-0277  Wavetronix, LLC, Provo, Utah, 84604
Wavetronix, LLC    SmartSensor 105 User Manual 3Contents
Wavetronix, LLC    SmartSensor 105 User Manual 4Unpacking    The smart sensor packaging should include the following items: 1.  SmartSensor 105 Detector 2. Mounting Plate 3.  (5) Mounting Screws 4.  Sensor Cable (Customer Specific Length) 5. User Manual 6.  CD with Software  If any of these items are missing record the serial number located on the side of the sensor and contact the Wavetronix Support at ??.   Additional products may  be purchased through your distributor, and software and firmware may be downloaded using you Wavetronix customer ID number for free at www.wavetronix.com .   Unit Identification
Wavetronix, LLC    SmartSensor 105 User Manual 5Installing   Physical installation of the SmartSensor   •  Choose a location for the sensor to be mounted.  The sensor can be mounted on a vertical or horizontal placed pole or on a flat vertical surface (i.e. wall, billboard, etc.).  It is recommended that the mounting location be a distance 15-22.5 ft from the nearest point of interest and mounted 20-30 ft above road level as illustrated in figure 1. •  There are 2 available brackets to choose from.  Secure the mounting bracket to the selected surface facing the desired detection area.   1)  Adjustable pole mounting bracket.  This bracket can be used on vertical or horizontal poles and requires three bands to secure it to a pole.  The bracket has 360° of vertical/horizontal adjustability and 70° of tilt adjustability (figure 2a). 2)  Adjustable flat mounting bracket.  This bracket can be used on flat vertical surfaces and requires 4 bolts to secure it to the surface.  The bracket has 70° of tilt adjustability (figure 2b). •  Secure the mounting plate to the bracket with 2 tapered screws (figure 3). •  Secure the SmartSensor to the mounting plate or bracket with five ¼ - 20 screws (figure 3). •  Aim the front of  sensor at the center of the detection area (figure 1 & 3). •  Connect the power/communication cable to the SmartSensor and attach the modem antenna if applicable.      Sensor cable is must be at least 2 m long or the FCC license is void!
Wavetronix, LLC    SmartSensor 105 User Manual 6                                                                              Software Configuration  Tracking Installations     Trouble Shooting
Wavetronix, LLC    SmartSensor 105 User Manual 7 Upgrading Firmware    Specifications     Warranty
Wavetronix, LLC    SmartSensor 105 User Manual 8Notes    Wavetronix Customer ID Number: _____________________ Serial Number: _____________________________________ Date Installed: __________    Installation Site: ______
Wavetronix, LLC    SmartSensor 105 User Manual 9                                             Part Number: XXXXXXXXX    BARCODE

Navigation menu