Wease Electrical and Information Engineering E800G001 Miracast Dongle with 802.11b/g/n User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2151616
Application ID	jdMbpTwvpGYaHbaAyHPTpw==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.98kB (287232 bits)
Date Submitted	2013-12-26 00:00:00
Date Available	2013-12-26 00:00:00
Creation Date	2013-12-19 14:48:01
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2013-12-25 12:42:11
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

Quick Start Guide
Miracast Dongle
Package List：
Miracast dongle 1pc
Quick Start Guide 1pc
5V/1A power adapter 1pc
System Requirement:
1. TV Set with HDMI port
2. USB power output on TV set or other USB
power adapter
3. The mobile device supports Miracast
Quick Start:
1. Insert MiraVision to TV HDMI port and connect
USB power line from TV USB port or USB power
adapter.
2. Switch on TV set and choose the corresponding
HDMI signal source, MiraVision device name and
MiraVision status will be played on TV screen as
“WFD_DONGLE_XXX XXX”
3. To start miracast, from your mobile device set
menu/display/wireless display, open wireless display
and search for MiraVision device name, choose it
and wait the connection
until Miracast
“connecting…”is displayed on the TV screen;
4.
When the connection is successful, the display
of mobile device will be copy to TV screen
synchronously.
Troubleshooting ：
1. When no image is displayed on TV screen,
please check:
1 . If MiraVision USB power is available.
2 . If the corrent HDMI input signal source is
choosed..
2. Any error happens when Miracast connects, you
can disconnect USB power line and retry to
connect MiraVision.
3. when the display size have not matched on TV
screen well,adjust the display length-width ratio
to the proper parameter.
FCC RF Statement.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this devic e may not cause harmful i nterference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: The manufacturer is not responsib le for any radio or TV interference
caused by unauthoriz ed modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digit al device, pursuant to p art 15 of the FCC Rules. These limits
are designed to provi de reasonable protection against harmful interference in
a residential inst allation. This equi pment generates uses and can radiate
radio frequency energy and, if not inst alled and used in accordance with the
instructions, may ca use harmful interference to radio communications.
However, there is no guarant ee that interference will not occur in a particular
installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by turning the equipment of f and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a ci rcuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The users manual or instruction manual for an intentional or unintentional radiator
shall caution the user that changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate the
equipment. In cases where the manual is provided only in a form other than paper,
such as on a computer disk or over the Internet, the information required by this
section may be included in the manual in that alternative form, provided the user
can reasonably be expected to have the capability to access information in that form.
Note:The minimum separation distance is 5mm for the normal using.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2013:12:19 14:48:01+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2013:12:25 12:42:11+08:00
Metadata Date                   : 2013:12:25 12:42:11+08:00
Format                          : application/pdf
Title                           : <5C5C7073665C486F6D655CB9A4D7F75C5354535CB9A4B3CCCEC4BCFE5CCFEEC4BFB0B8BCFE5C313331325C453830305CD7CAC1CF5C45383030D3A2CEC4CBB5C3F7CAE92E646F63>
Creator                         : Administrator
Document ID                     : uuid:849a3e17-cf68-478b-9f38-512afb420867
Instance ID                     : uuid:8b59abfb-b6ac-4916-ae3d-029d5e240da6
Has XFA                         : No
Page Count                      : 5
Author                          : Administrator

EXIF Metadata provided by EXIF.tools