Weider 831150462 User Manual PRO 125 Manuals And Guides L0807008

WEIDER Weight System Manual L0807008 WEIDER Weight System Owner's Manual, WEIDER Weight System installation guides

User Manual: Weider 831150462 831150462 WEIDER WEIDER PRO 125 - Manuals and Guides View the owners manual for your WEIDER WEIDER PRO 125 #831150462. Home:Fitness Equipment Parts:Weider Parts:Weider WEIDER PRO 125 Manual

Open the PDF directly: View PDF .
Page Count: 15

Download
Open PDF In Browser	View PDF

USER'S
MANUAL

Model No. 831.150462
Serial No.
Write the serial number in the space
above

for reference,

Serial

Number

Decal (under

seat)

EXERCISE:
EQUIPMENT

HELPLINE!

1-800-736-6879

SEARS, ROEBUCK AND CO.,
HOFFMAN ESTATES, IL
60179

PATENT PENDING

www.weiderfitness.com
new products, prizes,
fitness tips, and much more!

Warning Decal Placement ................................................................
Important Precautions ...................................................................
Before You Begin .......................................................................
Assembly ............................................................................
Adjusting the Weight Bench ...............................................................
Exercise Guidelines ....................................................................
Ordering Replacement Parts ......................................................
Full 90 Day Warranty ............................................................

2
3
4
5
9
f0
Back Cover
Back Cover

Note: A Part List, Exploded Drawing and Part Identification Chart is attached to the center of this manual.
Remove these four pages before beginning assembly.

The decal shown below has been placed on the weight bench. If the decal is missing, or if it is not legible, please call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m.
Central Time, to order a replacement decal. Apply the replacement decal to the location shown.

Do not use this tube
to pin seat in upright
position:

Do not allow children on or around machine.
Replace label if damaged, illegible, or removed.

Thank you for selecting the versatile WELDER ® PRO
125 Weight Bench.The WELDER c_PRO 125 is
designed to help you develop every major muscle
group of the body. Whether your goal is a shapely figure, dramatic muscle size and strength or a healthier
cardiovascular system, the PRO 125 Weight Bench will
help you achieve the specific results you want.

Saturday, 7 a.m. until 7 p.m. Central Time (excluding
holidays). To help us assist you, please note the product model number and serial number before calling.
The model number is 831.150462. The serial number
can be found on a decal attached to the WELDER ®

For your benefit, read this manual carefully before
using the WELDER® PRO 125 Weight Bench. If you
have additional questions, please call our toIFfree
HELPLINE at 1-800-736-6879, Monday through

Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.

PRO 125 Weight Bench (see the front cover of this
manual).

Right Side

Foam Pad
Seat Adjustment Bracket
Seat

Backrest

Foam Pads--

Adjustment
Bracket

Leg

Main Frame

Adjustment Knob
Adjustment Leg

Left Side

Note: The terms "right side" and "left side" are
determined relative to a person sitting on the
bench, and they do not correspond to what is right
and left on the drawings in the manual.

Before beginning assembly, carefully read the
following information and instructions:

• For help identifying the small parts, use the PART
IDENTIFICATION CHART in the center of the
manual.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
The following tools (not included)
for assembly:

are required

• Two (2) adjustable wrenches
• One (1) rubber mallet
• One (1) standard screwdriver
• Assembly requires two people.
• One (1) phillips screwdriver
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.

• Lubricant, such as grease or petroleum jelly
plus soapy water.

• Tighten all parts as you assemble them, unless
instructed to do otherwise.

Assembly will be more convenient if you have the
following tools: A socket set, a set of open-end or
closed-end wrenches or a set of ratchet wrenches.

Before assembling this product, make sure you
understand the information in the box above.
Position the Rear Stabilizer (2) with the warning decal
facing as shown. Note that on one side of the Rear
Stabilizer there is an indentation around each of the
two holes. Push two M10 x 72mm Carriage Bolts (21)
through the holes in the Stabilizer so the bolt heads fit
into the indentations.
Slide the bracket on the Main Frame (1) onto the two
M10 x 72mm Carriage Bolts (21) in the Stabilizer (2)
and secure it with two M10 Nylon Locknuts (18).

18
I

Decal

Press a 60mm Round Endcap (10) onto each end of
the Stabilizer (2).

2
21 _

.....

Push two M10 x 70mm Bolts (19) through the holes in
the Support Plate (27) and then through the indicated
holes in the Main Frame (1).

19
27

Slide the bracket on the Leg (6) onto the two M10 x
70mm Bolts (19) and secure it with two M10 Nylon
Locknuts (18).

24
18

Press a Square Bushing (22) onto the lower end of
the Leg (6).
Press a 25mm Square Inner Cap (24) into the end of
the sidearm on the Leg (6).

Locate the second Stabilizer (2). Note the indentations around the holes. Push two M10 x 72mm

Carriage Bolts (21) through the holes in the Stabilizer
so the bolt heads fit into the indentations.
18

Slide the bracket on the Adjustment Leg (7) onto the
two M10 x 72mm Carriage Bolts (21) in the Stabilizer
(2) and secure it with two M10 Nylon Locknuts (18).

Press a 60mm Round Endcap (10) onto each end of
the Stabilizer (2).

Slide the Adjustment Leg (7) up into the Leg (6) and
line up one of the adjustment holes in the Adjustment
Leg with the indicated hole in the Leg.
Insert the Adjustment Knob (23) through the holes in
both the Leg (6) and the Adjustment Leg (7). Tighten
the Adjustment Knob fully into the welded nut.

Welded
Nut

Attach a 30mm x 25mm Bumper (26) to the indicated
hole in the Main Frame (1) with a Bumper Screw (25).
Bracket

Press a 25mm x 50mm Inner Cap (14) into the end of
the Backrest Frame (4).
Place the Backrest Frame (4) onto the Main Frame
(1) and line up the welded tube on the Backrest
Frame with the bracket on the Main Frame. Secure
the Backrest Frame with an M1O x 80mm Bolt (17)
and an M10 Nylon Locknut (18). Do not overtighten
the Nylon Locknut; it must be easy to pivot the
Backrest Frame.

Welded
Tube

25_
26
1

Note that the bracket on the Backrest Frame (4)
has four sets of oval adjustment holes and one
set of round holes. Position the 15mm x 1O.Smm x
67mm Spacer (28) between the two sides of the
bracket and line it up with the round holes. Insert an
M10 x 85mm Bolt (29) through the round holes in the
bracket and through the Spacer. Secure the Bolt with
an M10 Nylon Locknut (16). Note:The Spacer must
be positioned under the Main Frame (1).

Insert the Locking Pin (16) through one set of adjustment holes in the bracket on the Backrest Frame (4)
and through the welded tube on the Main Frame (1).
Note:The welded tube is not visible in this draw-

ing, but it is marked in drawing 5.
Adjustment
Holes

Attach the Backrest (8) to the brackets on the
Backrest Frame (4) with four M6 x 16ram Screws
(15).
8

Attach a 30ram x 25mm Bumper (26) to the indicated
hole in the Main Frame (1) with a Bumper Screw (25).

Welded Tube (A)

20
Press a 25mm x 50mm Inner Cap (14) into each end
of the Seat Frame (5).
Important: The Seat Frame (5) has two welded
tubes, "Tube A" goes through the Seat Frame
itself, and "Tube B" is welded underneath the Seat
Frame, Do not confuse these two tubes in the following

% 14
,,,

Welded
(B)

....

Bracket

step,

Line up Tube A in the Seat Frame with the upper hole
in the bracket on the Main Frame (1). Insert the M10 x
95mm Bolt (20) through the bracket and the welded
tube in the Seat Frame. Secure the Bolt with an M10
Nylon Locknut (18).
Note: The Locking Pin w/Ring can be inserted through
Tube B to prevent the Seat Frame (5) from pivoting.
9
g,

Attach the Seat (9) to the brackets on the Seat Frame
(5) with four M6 x 16mm Screws (15).
15

10. Press a 19ram Round Inner Cap (13) into each end of
the Short Pad Tube (31) and the Long Pad Tube (12).

10
11

Mount the Long Pad Tube (12) in the hole in the Seat
Frame (5) in the following manner: Slide a Plastic
Spacer (3) and a Foam Pad (11) onto one end of the
Pad Tube. Slide the Pad Tube through the hole in the
Seat Frame. Slide a Plastic Spacer (3) and a Foam
Pad (11) onto the other end of the Pad Tube.

3
12
13

Mount the Short Pad Tube (31) in the hole in the
sidearm on the Leg (6) by following the instructions
given above.

6 /

This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 10 for important information on how to get the most benefit from your exercise program. Also, refer to the accompanying
exercise poster to see the correct form for each exercise.
Inspect and tighten all parts each time you use the weight bench. Replace any worn parts immediately. The
weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
ADJUSTING THE BACKREST
The Backrest (8) can be used in a level position, two
inclined positions and a declined position. To adjust the
Backrest to a level position or an inclined position, insert
the Locking Pin (16) through one of the adjustment holes
in the backrest adjustment bracket and through the welded tube in the Main Frame (1).

Jstment
Bracket

To use the Backrest (8) in a declined position, remove the
Locking Pin (16) and lower the Backrest until it rests
directly on the Main Frame (1). Re-insert the Locking Pin.
Welded Tube -

ADJUSTING THE HEIGHT OF THE WEIGHT BENCH
To adjust the height of the weight bench, unscrew the
Adjustment Knob (23) and raise or lower the Main Frame
(1) to the desired position. Line up the hole in the Leg (6)
with one of the adjustment holes in the Adjustment Leg
(7). Re-insert the Adjustment Knob and tighten it fully into
the welded nut.

23
Nut

SETTING UP THE WEIGHT BENCH FOR ROMAN
CHAIR EXERCISES
To set up the bench for roman chair exercises, turn the
Seat Frame (5) to the upright position. Insert the Locking
Pin/w Ring (30) through the indicated hole in the adjustment bracket and the hole in the Seat Frame. Now adjust
the height of the weight bench as described above, so the
Seat (9) is in a comfortable position.

Welded

Note: When the Seat (9) is in the lower position, insert the
Locking Pin/w Ring (30) through the welded tube to prevent the seat from pivoting during exercises.

ustment
Bracket

THEFOURBASICTYPESOFWORKOUTS

PERSONALIZING

MuscleBuilding
Theonlywaytoincreasethe sizeandstrengthofyour
musclesis to pushthemclosetotheirmaximum
capacity.
Whenyouprogressively
increasethe intensity ofyourexercise, your muscles will continually adapt

Specifying the exact length of time for each workout,
as well as the number of repetitions or sets for each
exercise, is a highly individual matter. It is very important to avoid overdoing it during the first few months of
your exercise program. You should progress at your
own pace and be sensitive to your body's signals. If
you experience pain or dizziness at any time while
exercising, stop immediately and begin cooling down.
Find out what is wrong before continuing. Remember
that adequate rest and a proper diet are important
factors in any exercise program.

and grow. You can tailor the individual exercise to the
proper intensity level in two ways:
• by changing the amount of weight used
• by changing the number of repetitions or sets performed (A "repetition" is one complete cycle of an
exercise, such as one sit-up. A "set" is a series of
repetitions).

YOUR EXERCISE PROGRAM

WARMING UP

The proper amount of weight for each exercise obviously depends upon the individual user. You must
gauge your limits and select the amount of weight that
is right for you. Begin with 3 sets of 8 repetitions for
each exercise you perform. Rest for 3 minutes after
each set. When you can complete 3 sets of 12 repetitions without difficulty, increase the amount of weight.

Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
your body for more strenuous exercise by increasing
circulation, raising your body temperature and delivering more oxygen to your muscles.
WORKING OUT

Toning

Each workout should include 6 to 10 different exercis-

You can tone your muscles by pushing them to a
moderate percentage of their capacity. Select a moderate amount of weight and increase the number of
repetitions in each set. Complete as many sets of 15
to 20 repetitions as possible without discomfort. Rest
for 1 minute after each set. Work your muscles by
completing more sets rather than by using high
amounts of weight.

es. Select exercises for every major muscle group with
emphasis on the areas that you want to develop the
most. To give balance and variety to your workouts,
vary the exercises from session to session.

Weight Loss

EXERCISE FORM

To lose weight, use a low amount of weight and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.

You will gain the greatest benefits from exercising by
maintaining proper form. This requires moving through
the full range of motion for each exercise and moving
only the appropriate parts of the body. Exercising in
an uncontrolled manner will leave you feeling exhausted. On the exercise poster accompanying this manual,
you will find photographs showing the correct form for
several exercises. A description of each exercise is
also provided, along with a list of the muscles affected. Refer to the muscle chart below to find the locations of the muscles.

Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.

Cross Training
Many people desire a complete and well-balanced fitness program, and cross training is a very efficient
way to accomplish this. One example of a balanced
program is:
• Plan weight training workouts on Monday,
Wednesday and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
cycling, running or swimming on Tuesday and
Thursday.
• Rest from both weight training and aerobic exercise
for at least one full day each week to give your body
time to regenerate.
The combination of weight training and aerobic exercise will reshape and strengthen your body plus
develop your heart and lungs.

The repetitions in each set should be performed
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
during the return stroke. Never hold your breath!

You should rest for a short period of time after each
set. The ideal resting periods are:
• Rest three minutes after each set for a muscle build-

each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout is
very effective for increasing flexibility.

ing workout
• Rest one minute after each set for a toning workout
• Rest 30 seconds after each set for a weight loss
workout

STAYING MOTIVATED
For motivation, keep a record of each workout. List
the date, the exercises performed, the weight plus the
numbers of sets and repetitions completed. Record
your weight and key body measurements at the end
of every month.

Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
COOLING DOWN

Remember, the key to achieving the greatest results
is to make exercise a regular and enjoyable part of
your everyday life.

End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
slowly as you stretch and do not bounce. Ease into

Muscle Chart

Trapezius
Deltoid

Major
Trapezius

Biceps

Abdominus
Deltoid

Brachioradials --

Abductor

Triceps
- Latissimus Dorsi

Hip Flexors
Spinae Erectors
Quadriceps

Gluteus
Medius

Brachioradials

Adductor
l_u
Soleus

Gluteus
Maximus
Abduc_rs
Hamstring

MIO x 70mmBolt (19)-2
MIO NylonLocknut(18)-9

MIOx 72mmCarriageBolt (21)-4

BumperScrew(25)-2
MIO x 80mmBolt (17)-1

MIO x 85mmBolt (29)-1

MIO x 95mmBolt (20)-1

M6 x 16mmScrew(15)-8

Key No. Qty. Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

1
2
4
1
1
1
1
1
1
4
4
1
4
3
8

Main Frame
Stabilizer
Plastic Spacer
Backrest Frame
Seat Frame
Leg
Adjustment Leg
Backrest
Seat
60mm Round Endcap
Foam Pad
Long Pad Tube
19mm Round Inner Cap
25mm x 50mm Inner Cap
M6 x 16mm Screw

16
17

1
1

Locking Pin
M10 x 80mm Bolt

Key No. Qty. Description
18
19
20
21
22
23
24
25
26
27
28
29
30
31
#

9
2
1
4
1
1
1
2
2
1
1
1
1
1
1

M10 Nylon Locknut
M10 x 70mm Bolt
M10 x 95mm Bolt
M10 x 72mm Carriage Bolt
Square Bushing
Adjustment Knob
25mm Square Inner Cap
Bumper Screw
30mm x 25mm Bumper
Support Plate
15ram x 10.5 x 67mm Spacer
M10 x 85mm Bolt
Locking Pin w/Ring
Short Pad Tube
User's Manual

Exercise Poster

Note: "#" indicates a nonqllustrated part. Specifications are subject to change without notice. See the back cover
of the user's manual for information about ordering replacement parts.

18
28

10
2
2

SEARS

The model number and serial number of your WELDER _ PRO 125
Weight Bench are listed on a decal attached to the frame. See the
front cover of this manual to find the location of the decal.
All replacement parts are available for immediate purchase or
special order when you visit your nearest SEARS Service Center.
To request service or to order parts by telephone, call the toll-free
numbers listed at the left.

QUESTIONS?
If you find that:
• you need help assembling or
operating theWEIDER c_PRO 125
Weight Bench
• a part is missing

When requesting help or service, or ordering parts, please be
prepared to provide the following information:
• The MODEL NUMBER of the product (831.150462).
• The NAME of the product (WELDER ®PRO 125 Weight Bench).

• or you need to schedule repair
• The KEY NUMBER and DESCRIPTION of the PART (see the
PART LIST/EXPLODED DRAWING at the center of this manual).

service

call our toll-free HELPLINE

1-800-736-6879
Monday-Saturday, 7 am-7 pm
Central Time (excluding holidays)

REPLACEMENT
PARTS
If parts become worn and need to
be replaced, call the following tollfree number

1-800-FON-PART
(1-800-366-7278)

For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this
SEARS WEIGHT BENCH EXERCISER, contact the nearest SEARS Service Center throughout the United
States and SEARS will repair or replace the WEIGHT BENCH EXERCISER, free of charge.
This warranty does not apply when the WEIGHT BENCH EXERCISER is used commercially or for rental
purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.
SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179
WELDER is a registered trademark of ICON Health & Fitness, Inc.
Part No. 158270 J02118-C

R0200A

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 15
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Thu Mar 20 09:38:08 2014
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Weider 831150462 User Manual PRO 125 Manuals And Guides L0807008

WEIDER Weight System Manual L0807008 WEIDER Weight System Owner's Manual, WEIDER Weight System installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation