Weider 8510 System Wesy8510 Users Manual .SYOM WESY85101 135112

Weider-8510-Users-Manual-233633 weider-8510-users-manual-233633

8510 to the manual bd6369b9-7ca2-4850-bd5e-47a8dcf8829c

2015-05-18

: Weider Weider-8510-System-Wesy8510-Users-Manual-734175 weider-8510-system-wesy8510-users-manual-734175 weider pdf

Open the PDF directly: View PDF .
Page Count: 27

USER'S MANUAL

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you have

questions, or find there are miss-

ing or damaged parts, we will

guarantee you complete satisfac-

tion through direct assistance

from our factory.

TO AVOID UNNECESSARY

DELAYS, PLEASE CALL DIRECT

TO OUR TOLL-FREE CUSTOMER

HOT LINE. The trained techni-

cians on our customer hot line

will provide immediate assis-

tance, free of charge to you.

CUSTOMER HOT LINE:

1-800-225-0653

Mon.ÐFri., 6 a.m.Ð6 p.m. MST

Model No. WESY85101

Serial No.

(Write the serial number in the space

above for reference.)

Serial Number Decal

PATENT PENDING

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

TABLE OF CONTENTS

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

TROUBLE-SHOOTING AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

CABLE DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: a PART IDENTIFICATION CHART is attached to the center of this manual. Remove the PART

IDENTIFICATION CHART before beginning assembly.

LIMITED WARRANTY

ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and

material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-

chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-

ited to replacing or repairing, at ICON's option, the product at one of its authorized service centers. All

products for which warranty claim is made must be received by ICON at one of its authorized service cen-

ters with all freight and other transportation charges prepaid, accompanied by sufficient proof of purchase.

All returns must be pre-authorized by ICON. This warranty does not extend to any product or damage to

a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or

repairs not provided by an ICON authorized service center or for products used for commercial or rental

purposes. No other warranty beyond that specifically set forth above is authorized by ICON.

ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-

nection with the use or performance of the product or damages with respect to any economic loss, loss

of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other

consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-

dental or consequential damages. Accordingly, the above limitation may not apply to you.

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of

merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth

herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above

limitation may not apply to you.

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813

1. It is the responsibility of the owner to ensure

that all users of the home gym system are

adequately informed of all precautions.

2. Read all instructions in this manual and in

the accompanying literature before using the

home gym system.

3. If you feel pain or dizziness at any time while

exercising, stop immediately and begin cool-

ing down.

4. Use the home gym system only on a level

surface. Cover the floor or carpet beneath

the home gym system for protection.

5. Inspect and tighten all parts often. Replace

any worn parts immediately.

6. Keep small children and pets away from the

home gym system at all times.

7. Always wear athletic shoes for foot protec-

tion.

8. Keep hands and feet away from moving parts.

9. Always stand on a foot plate when perform-

ing an exercise that could cause the home

gym system to tip.

10. Never release the press arm, butterfly arms,

leg lever, lat bar, or nylon strap while weights

are raised. The weights will fall with great

force.

11. Make sure that the cables remain on the pul-

leys at all times. If the cables bind while you

are exercising, stop immediately and make

sure that the cables are on all of the pulleys.

12. Always disconnect the lat bar from the home

gym system when performing an exercise

that does not use the lat bar.

13. The home gym system is intended for home

use only. Do not use the home gym system in

any commercial, rental, or institutional set-

ting.

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions before

using the home gym system.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially

important for persons over the age of 35 or persons with pre-existing health problems. Read all

instructions before using. ICON assumes no responsibility for personal injury or property damage

sustained by or through the use of this product.

BEFORE YOU BEGIN

ASSEMBLED

DIMENSIONS:

Height: 76 in.

Width: 38 in.

Length: 53 in.

Foot Plate

Low Pulley Station

High Pulley Station

Lat Bar

Leg Lever

Butterfly Arms

Press Arm

Weight Stack

Seat

Backrest

Weight Pin

Thank you for selecting the versatile WEIDER¨8510

Home Gym System. The WEIDER¨8510 offers a

selection of weight stations designed to develop every

major muscle group of the body. Whether your goal is

to tone your body, build dramatic muscle size and

strength, or improve your cardiovascular system, the

WEIDER¨8510 will help you to achieve the specific

results you want.

For your benefit, read this manual carefully before

using the WEIDER¨8510 Home Gym System. If you

have additional questions, please call our Customer

Service Department toll-free at 1-800-225-0653,

Monday through Friday, 6 a.m. until 6 p.m. Mountain

Time (excluding holidays). To help us assist you,

please note the product model number and serial

number before calling. The model number is

WESY85101. The serial number can be found on a

decal attached to the WEIDER¨8510 (see the front

cover of this owner's manual).

Before reading further, please review the drawing

below and familiarize yourself with the parts that are

labeled.

ASSEMBLY

High Side of

Bracket

51 14

Before beginning assembly, carefully read the

following information and instructions:

¥Place all parts of the home gym system in a

cleared area and remove the packing materials;

do not dispose of the packing materials until

assembly is completed.

¥ The assembly is divided into four stages: 1)

frame assembly, 2) press and butterfly arm

assembly, 3) cable and pulley assembly, and 4)

seat and backrest assembly. The hardware for

each stage is packaged separately.

¥ Wait until you begin each assembly stage to open

that parts bag.

¥For help identifying the small parts used in

assembly, use the PART IDENTIFICATION

CHART located in the center of this manual.

Note: Some small parts may have been pre-

attached for shipping. If a part is not in the parts

bag, check to see if it has been pre-attached.

¥As you assemble the home gym system, be sure

that all parts are oriented as shown in the

drawings.

¥Tighten all parts as you assemble them, unless

instructed to do otherwise.

THE FOLLOWING TOOLS (NOT INCLUDED) ARE

REQUIRED FOR ASSEMBLY:

¥ Two (2) adjustable wrenches

¥ One (1) standard screwdriver

¥ One (1) phillips screwdriver

¥ One (1) rubber mallet

¥ Lubricant, such as grease or petroleum jelly,

and soapy water will also be needed.

Assembly will be more convenient if you have the

following tools: A socket set, a set of open-end or

closed-end wrenches, or a set of ratchet wrenches.

1. Before beginning assembly, be sure that

you have read and understand the infor-

mation in the box above.

Press a 2Ó Square Outer Cap (51) onto each

end of the Stabilizer (5). Press a 2Ó Square

Inner Cap (27) into the end of the Base (4).

Insert two 5/16Ó x 2 3/4Ó Carriage Bolts (14)

up through the Stabilizer (5). Insert two 5/16Ó

x 2 1/2Ó Carriage Bolts (1) up through the

Base (4).

Slide the indicated end of the Base (4) onto

the 5/16Ó x 2 3/4Ó Carriage Bolts (14) in the

Stabilizer (5). Slide the Rear Upright (56)

onto the Carriage Bolts. Hand tighten a 5/16Ó

Nylon Locknut (3) onto each Carriage Bolt.

The high side of the bracket on the Rear

Upright must be on the side shown. Do

not tighten the Nylon Locknuts yet.

FRAME ASSEMBLY

2. Slide the Front Upright (42) onto the 5/16Ó x

2 1/2Ó Carriage Bolts (1) in the Base (4).

Hand tighten a 5/16Ó Nylon Locknut (3) onto

each Carriage Bolt. Do not tighten the

Nylon Locknuts yet.

Press a 1Ó Square Inner Cap (65) into the

Front Upright (42).

3. Press a 2Ó Square Inner Cap (27) into each

end of the Top Frame (55). Press a 1 3/4Ó

Square Inner Cap (44) into each end of the

crossbar on the Top Frame. Press two 1Ó

Round Inner Caps (49) into the top of the

crossbar.

Attach the Top Frame (55) to the Front Upright

(42) and the Rear Upright (56) with four 5/16Ó

x 2 3/4Ó Bolts (11), four 5/16Ó Flat Washers

(8), and four 5/16Ó Nylon Locknuts (3).

Tighten all Nylon Locknuts used in steps 1

through 3.

4. Set two Weight Bumpers (19) onto the brack-

et on the Base (4) as shown.

Stack six Weights (25) on the Weight

Bumpers (19). Be sure that all of the Weights

are turned so the pin grooves are on the

same side. Be careful not to tip the stack

of Weights.

11 11

56 42

Crossbar

Pin Groove

4ÑBracket

FRAME ASSEMBLYARM ASSEMBLY

5. Press the Weight Tube Bumper (64) into the

end of the Weight Tube (63). Insert the

Weight Tube into the stack of Weights (25).

Be sure that the pins on the Weight Tube are

resting in the pin grooves in the upper

Weight.

Lubricate the insides of the holes in the Top

Weight (76). Set the Top Weight onto the

stack of Weights (25).

Insert both Weight Guides (62) into the stack

of Weights (25). Be sure that the holes in

the Weight Guides are at the top, as

shown.

6. Attach the upper ends of the Weight Guides

(62) to the Top Frame (55) with the 5/16Ó x 6Ó

Bolt (60), two 1/2Ó x 3/4Ó Spacers (61), and a

Nylon Locknut (3).

Be sure that the Pulley Bracket (20) is in

front of the right Weight Guide (62) as

shown.

7. Press a 1Ó x 7/8Ó Plastic Bushing (75) onto

each welded spacer on the Press Frame (17).

Slide the Press Frame into place on the Base

(4). Note: This will be a tight fit. The

Plastic Bushings should fit onto each end

of the indicated tube in the Base. Be sure

that the pulleys are on the indicated side.

Lubricate the 3/8Ó x 8Ó Bolt (59). Attach the

Press Frame (17) to the Base (4) with the

3/8Ó x 8Ó Bolt and a 3/8Ó Nylon Locknut (21).

Lubricate

60 20

4ÑTube

Welded

Spacers

Lubricate

Pulleys

Holes

ARM ASSEMBLY

8. Press a 1 3/4Ó Square Inner Cap (44) into the

top of a Press Arm (46). Press a 1Ó Round

Inner Cap (49) into each end of the handle on

the Press Arm. Attach the Press Arm to one

side of the Press Frame (17) with two 5/16Ó x

2 1/2Ó Bolts (22) and two 5/16Ó Nylon

Locknuts (3).

Assemble the other Press Arm (46) in the

same manner.

9. Identify the Right Arm (48) and the Left Arm

(47). Note the position of the welded bracket

on each Arm. Arm identification is very

important for step 10.

Note: The ÒVÓ-Pulleys (6), Long Cable Traps

(50), 3/8Ó x 2 1/2Ó Bolts (7), and 3/8Ó Nylon

Locknuts (21) are pre-attached. These have

been shown disassembled for easy part iden-

tification.

10. Lubricate both axles on the Top Frame (55).

Slide the Right Arm (48) onto the right axle.

Note: Be careful not to confuse the Right

Arm with the Left Arm (47); refer to step 9

to identify the Right Arm. Be sure that the

upper end of the Right Arm is behind the

indicated bracket on the Top Frame (55).

Tap two 1Ó Retainers (69) and a 1Ó Round

Cover Cap (70) onto the right axle. Be sure

that the teeth on the Retainers bend

toward the Cover Cap, as shown in the

inset drawing.

Attach the Left Arm (47) in the same manner.

Press 1 3/4Ó Square Inner Caps (44) into the

lower ends of the Right and Left Arms (47,

48). Wet the lower end of each Arm with

soapy water. Slide a 10Ó Pad (45) onto the

lower end of each Arm.

Bracket

Lubricate Axle

Welded

Brackets

CABLE ASSEMBLY

11. During steps 11 through 25, refer to the

CABLE DIAGRAM on page 20 of this manual

to verify proper cable routing. Before begin-

ning this section, identify the Long Cable (23)

and the Short Cable (58) by comparing the

lengths and ends of the cables.

IMPORTANT: While assembling the cables,

do not overtighten the bolts and nuts

securing the pulleys. The pulleys must be

able to turn freely.

12. Locate the Long Cable (23). Route the Long

Cable around the indicated 3 1/2Ó Pulley (15)

attached to the Top Frame (55). Be sure that

the end of the Cable with the ball is on the

indicated side of the Pulley and that the

Cable is between the Pulley and the hook.

Tighten the 3/8Ó x 3 3/4Ó Bolt (71) and the 3/8Ó

Nylon Locknut (not shown).

13. Wrap the Long Cable (23) around a ÒVÓ-Pulley

(6). Attach the ÒVÓ-Pulley and a Long Cable

Trap (50) to the indicated bracket on the

Front Upright (42) with a 3/8Ó x 2 1/2Ó Bolt (7)

and a 3/8Ó Nylon Locknut (21). Be sure that

the Long Cable Trap is positioned to hold

the Cable in place.

14. Route the Long Cable (23) around the ÒVÓ-

Pulley (6) on the Left Arm (47). Be sure that

the Cable is in the groove of the Pulley

and that the Long Cable Trap (50) is posi-

tioned to hold the Cable in place. Tighten

the 3/8Ó x 2 1/2Ó Bolt (7) and the 3/8Ó Nylon

Locknut (not shown).

Hook

Ball

650

15. Route the Long Cable (23) around the ÒVÓ-

Pulley (6) on the Right Arm (48). Be sure

that the Cable is in the groove of the ÒVÓ-

Pulley and that the Long Cable Trap (50) is

turned to hold the Cable in place. Tighten

the 3/8Ó x 2 1/2Ó Bolt (7) and the 3/8Ó Nylon

Locknut (not shown).

16. Route the Long Cable (23) around the 3 1/2Ó

Pulley (15) attached to the Pulley Bracket

(20). Be sure that the Cable is in the

groove of the Pulley and that the Cable

Trap (66) is turned to hold the Cable in

place. Tighten the 3/8Ó x 2Ó Bolt (12) and the

3/8Ó Nylon Locknut (not shown).

Be sure that the 5/16Ó x 5Ó Bolt (68) is proper-

ly tightened and that the Pulley Bracket (20)

can move freely.

17. See the inset drawing. Attach a 3 1/2Ó Pulley

(15) and a Cable Trap (66) to the indicated

hole in the Long ÒUÓ-Bracket (57) with a 3/8Ó x

2Ó Bolt (12) and a 3/8Ó Nylon Locknut (21). Be

sure that the Cable Trap is inside the ÒUÓ-

Bracket. Note: This may come pre-assem-

bled.

Route the Long Cable (23) around the 3 1/2Ó

Pulley (15) and through the Long ÒUÓ-Bracket

(57). Be sure that the Cable is in the

groove of the Pulley and that the Cable

and Pulley move smoothly.

18. Note: The Pulley (15) in this drawing is

pre-assembled. It is shown disassembled

for easy part identification.

Route the Long Cable (23) around the 3 1/2Ó

Pulley (15) attached to the bracket on the Top

Frame (55). Tighten the 3/8Ó x 2Ó Bolt (12)

and the 3/8Ó Nylon Locknut (21). Be sure that

the Cable is in the groove of the Pulley

and that the Cable and Pulley move

smoothly.

CABLE ASSEMBLY

50 76

Bracket

CABLE ASSEMBLY

19. Note: This assembly step shows how to

complete the assembly of several pre-

attached parts.

The 5/8Ó x 9/16Ó Spacer (73) has been pre-

attached on the outside of the 3 1/2Ó Low

Pulley (77) for shipping purposes. Remove

the 3/8Ó Nylon Locknut (21), the Spacer, and

the Pulley from the 3/8Ó x 3 3/4Ó Bolt (71). Do

not remove the Bolt. The Bolt has been

shown removed for part identification.

Reattach the 3 1/2Ó Low Pulley (77), with the

5/8Ó x 9/16Ó Spacer (73) between the Pulley

and the Press Frame (17). Do not tighten

the 3/8Ó Nylon Locknut (21) yet. Be sure

that the 3/8Ó x 3 3/4Ó Bolt (71), the 3/8Ó Flat

Washer (9), the 5/8Ó x 9/16Ó Spacer (73),

the 3 1/2Ó Low Pulley (77), and the 3/8Ó

Nylon Locknut (21) are oriented as shown.

20. Locate the Short Cable (58). Route the

Short Cable (58) under the 3 1/2Ó Low Pulley

(77). Be sure that the end of the Cable with

the ball is on the indicated side of the

Press Frame (17) and that the Cable is

between the Pulley and the crossbar on

the Press Frame. Tighten the 3/8Ó Nylon

Locknut (21) and the 3/8Ó x 3 3/4Ó Bolt (not

shown).

17 77

971

Crossbar

Ball

21. Route the Short Cable (58) around the 3 1/2Ó

Pulley (15) attached to the lower hole in the

Front Upright (42). See the inset drawing.

Be sure that the Cable Trap (66) is turned

to hold the Cable in place and that the

Cable is routed around the Pulley as

shown. Tighten the 3/8Ó Nylon Locknut (21)

and the 3/8Ó x 3 3/4Ó Bolt (71).

22. Route the Short Cable (58) around the 3 1/2Ó

Pulley (15) attached to the upper hole in the

Press Frame (17). Be sure that the Cable

Trap (66) is turned to hold the Cable in

place and that the Cable is routed around

the Pulley as shown. Tighten the 3/8Ó Nylon

Locknut (21) and the 3/8Ó x 3 1/2Ó Bolt (not

shown).

23. Route the Short Cable (58) around the 3 1/2Ó

Pulley (15) attached to the upper hole in the

Front Upright (42). See the inset drawing.

Be sure that the Cable Trap (66) is turned

to hold the Cable in place and that the

Cable is routed around the Pulley as

shown. Tighten the 3/8Ó Nylon Locknut (21)

and the 3/8Ó x 3 3/4Ó Bolt (71).

CABLE ASSEMBLY

Inset shows view

from other side

Inset shows view

from other side

24. Attach the end of the Short Cable (58) to the

Long ÒUÓ-Bracket (57) with a 1/4Ó Nylon Lock-

nut (2) and a 1/4Ó Flat Washer (10). Do not

completely tighten the Nylon Locknut. It

should be threaded onto the end of the

Cable so only a couple of threads are

showing above the nut, as shown in the

inset drawing.

25. Attach the Long Cable (23) to the Small ÒUÓ-

Bracket (67) with a 1/4Ó Nylon Locknut (2)

and a 1/4Ó Flat Washer (10). Do not com-

pletely tighten the Nylon Locknut. It

should be threaded onto the end of the

Cable only a couple of turns, as shown in

the inset drawing.

Attach the Small ÒUÓ-Bracket (67) to the

Weight Tube (63) with the 5/16Ó x 1 3/4Ó Bolt

(72) and a 5/16Ó Nylon Locknut (3).

CABLE ASSEMBLY

10 2

26. Attach the Backrest (41) to the Front Upright

(42) with two 1/4Ó x 2 1/2Ó Screws (43) and

two 1/4Ó Flat Washers (10).

27. Press a 1 1/2Ó Square Inner Cap (32) into the

Seat Frame (36).

Insert the 1/4Ó x 2Ó Carriage Bolt (38) into the

center hole in the Seat Plate (37). Attach the

Seat Plate to the Seat (13) with two 1/4Ó x

1/2Ó Screws (18).

Insert the 1/4Ó x 2Ó Carriage Bolt (38) into the

indicated hole in the Seat Frame (36).

Tighten a 1/4Ó Nylon Locknut (2) with a 1/4Ó

Flat Washer (10) onto the Carriage Bolt.

Attach the other end of the Seat (13) to the

Seat Frame (36) with a 1/4Ó Flat Washer (10)

and the 1/4Ó x 2Ó Screw (24).

28. Press a 1 1/2Ó Square Inner Cap (32) into the

Leg Lever (29).

Lubricate the 5/16Ó x 2 1/4Ó Bolt (33). Attach

the Leg Lever (29) to the Seat Frame (36)

with the 5/16Ó x 2 1/4Ó Bolt and a 5/16Ó Nylon

Locknut (3). Do not overtighten the Nylon

Locknut. The Leg Lever must be able to

pivot freely.

Insert the 5/16Ó x 2Ó Eyebolt (35) into the Leg

Lever (29) from the direction shown. Tighten

a 5/16Ó Nylon Locknut (3) with a 5/16Ó Flat

Washer (8) onto the Eyebolt.

SEAT ASSEMBLY

LubricateÐ33

37 32

29. Rest the Seat Frame (36) on the indicated pin

in the Front Upright (42). Attach the Seat

Frame to the Front Upright with a 5/16Ó x

2 3/4Ó Carriage Bolt (14) and the Seat Knob

(40).

30. Press 3/4Ó Round Inner Caps (34) into the

ends of both 12 1/2Ó Pad Tubes (28).

Insert one 12 1/2Ó Pad Tube (28) into the

Seat Frame (36). Slide a 5 1/2Ó Pad (30) onto

each end of the Pad Tube.

Insert the other 12 1/2Ó Pad Tube (28) into the

Leg Lever (29). Slide a 5 1/2Ó Pad (30) onto

each end of the Pad Tube.

SEAT ASSEMBLY

31. Remove the decals from the decal sheet (not shown) and apply them to the home gym system in the loca-

tions shown below.

HIGH PULLEY

BUTTERFLY

8510

BENCH PRESS

LOW PULLEY

LEG CURL

LEG EXTENSION

32. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in

ADJUSTMENT, beginning on page 17 of this manual.

Before using the home gym system, pull each cable a few times to be sure that the cables move smoothly

over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If

the cables are not properly installed, they may be damaged when heavy weight is used. See the

CABLE DIAGRAM on page 20 of this manual for proper cable routing. If there is any slack in the

cables, you will need to remove it by tightening the cables. See TROUBLE-SHOOTING AND MAINTE-

NANCE on page 19.

ADJUSTMENT

The instructions below describe how each part of the home gym system can be adjusted. Refer to the exercise

poster accompanying this manual to see how the home gym system should be set up for each exercise.

IMPORTANT: When attaching the lat bar or nylon strap, make sure that the attachments are in the cor-

rect starting position for the exercise to be performed. If there is any slack in the cables or chain as an

exercise is performed, the effectiveness of the exercise will be reduced.

25 26

CHANGING THE WEIGHT SETTING

To change the weight setting of the weight stack,

insert a Weight Pin (26) under the desired Weight

(25). Be sure to insert the Weight Pin until the bent

end of the Weight Pin is touching the Weights, and

turn the bent end downward. The weight setting of the

weight stack can be changed from 6.5 pounds to 81.5

pounds, in increments of 12.5 pounds. Note: Due to

the cables and pulleys, the actual amount of

resistance at each exercise station may vary from

the weight setting. Use the WEIGHT RESISTANCE

CHART on page 18 to find the actual amount of

resistance at each weight station.

ATTACHING THE LAT BAR OR NYLON STRAP TO

THE HIGH PULLEY STATION

Attach the Lat Bar (54) to the Long Cable (23) with a

Cable Clip (53). For some exercises, the Chain (52)

should be attached between the Lat Bar and the Long

Cable with two Cable Clips. Adjust the length of the

Chain between the Lat Bar and the Long Cable so

the Lat Bar is in the correct starting position for

the exercise to be performed.

The Nylon Strap (39) (not shown) can be attached in

the same manner.

ATTACHING THE LAT BAR OR NYLON STRAP TO

THE LOW PULLEY STATION

Attach the Lat Bar (54) to the Short Cable (58) with a

Cable Clip (53). For some exercises, the Chain (52)

should be attached between the Lat Bar and the

Pulley Cable with two Cable Clips. Adjust the length

of the Chain between the Lat Bar and the Short

Cable so the Lat Bar is in the correct starting

position for the exercise to be performed.

The Nylon Strap (39) (not shown) can be attached in

the same manner.

ATTACHING AND REMOVING THE SEAT

Set the bracket on the Seat Frame (36) onto the indi-

cated pins on the Front Upright (42). Attach the Seat

Frame to the Front Upright with the 5/16Ó x 2 3/4Ó

Carriage Bolt (14) and the Seat Knob (40).

For some exercises, the Seat (13) must be removed.

First, be sure that the chain is not attached to the leg

lever. Next, remove the Seat Knob (40) and the 5/16Ó

x 2 3/4Ó Carriage Bolt (14) from the Seat Frame (36).

Lift the Seat Frame off the Front Upright (42).

ATTACHING THE LEG LEVER TO THE LOW

PULLEY STATION

To use the Leg Lever (29), the seat must be attached

to the front upright (see ATTACHING AND REMOV-

ING THE SEAT above).

Attach one end of the Chain (52) to the Short Cable

(58) with a Cable Clip (53). Attach the other end of

the Chain to the Eyebolt (35) with a Cable Clip.

40 36

WEIGHT PRESS ARM BUTTERFLY ARM LEG LEVER HIGH PULLEY LOW PULLEY

PLATES (lbs.) (lbs.) (lbs.) (lbs.) (lbs.)

Top 20 10 15 14 2 4

145 22 36 28 54

270 33 54 44 82

399 42 75 60 115

4 128 48 96 72 147

5 153 60 115 90 175

6 184 69 137 103 209

WEIGHT RESISTANCE CHART

This chart shows the approximate weight resistance at each station. ÒTopÓ refers to the 6.5 lb. top weight. The

other numbers refer to the 12.5 lb. weight plates. Weight resistance shown for the butterfly arm station is for

each butterfly arm.

The actual resistance at each weight station may vary due to differences in individual weight plates, as well as

friction between the cables, pulleys, and weight guides.

TROUBLE-SHOOTING AND MAINTENANCE

Inspect and tighten all parts each time you use the home gym system. Replace any worn parts immediately. The

home gym system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents.

TIGHTENING THE CABLES

Woven cable, the type of cable used on the home

gym system, can stretch slightly when it is first used.

If there is slack in the cables before resistance is felt,

the cables should be tightened. Slack can be

removed from the cables by tightening the 1/4Ó Nuts

(2) at the end of the Long Cable (23) (see drawing 1)

and at the end of the Short Cable (58) (see drawing

2). To do this you may need to remove the Small ÒUÓ-

Bracket (67) from the Weight Tube (not shown) or

remove the 3 1/2Ó Pulley (15) from the Long ÒUÓ-

Bracket (57). Make sure that the cables are not too

tight, or the Top Weight (76) will be lifted off the

weight stack.

Additional slack can be removed by moving the 3 1/2Ó

Pulley (15) to the other hole in the Long ÒUÓ-Bracket

(57). Remove the 3/8Ó Nylon Locknut (21) and the

3/8Ó x 2Ó Bolt (12) from the Cable Trap (66), Pulley,

and ÒUÓ-Bracket. Re-attach the Pulley and Cable

Trap. Be sure that the Cable trap is in the proper

position and that the Cable and Pulley move smooth-

ly.

Note: If a cable tends to slip off the pulleys often,

the cable may have become twisted. Remove the

cable and re-install it.

If the cables need to be replaced, see ORDERING

REPLACEMENT PARTS on the back cover of this

manual.

CABLE DIAGRAM

The cable diagram below shows the proper routing of the Short Cable (58) and the Long Cable (23). Use the

diagram to be sure that the two cables and the cable traps have been assembled correctly. If the cables have

not been correctly routed, the home gym system will not function properly and damage may occur. The numbers

show the correct route for each cable. The starting and ending points of each cable are labeled. Be sure that

the cable traps do not touch or bind the cables.

Weight StackÑ8

1ÑLow Pulley

1ÑHigh Pulley

Long Cable (23)

5ÑLong ÒUÓ-Bracket

Short Cable (58)

TOP VIEW

NOTES

Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice.

PART LISTÑModel No. WESY85101 R1196A

Key No. Qty. Description

1 2 5/16Ó x 2 1/2Ó Carriage Bolt

2 3 1/4Ó Nylon Locknut

3 17 5/16Ó Nylon Locknut

4 1 Base

5 1 Stabilizer

6 3 ÒVÓ-Pulley

7 3 3/8Ó x 2 1/2Ó Bolt

8 5 5/16Ó Flat Washer

9 4 3/8Ó Flat Washer

10 6 1/4Ó Flat Washer

11 4 5/16Ó x 2 3/4Ó Bolt

12 3 3/8Ó x 2Ó Bolt

13 1 Seat

14 3 5/16Ó x 2 3/4Ó Carriage Bolt

15 7 3 1/2Ó Pulley

16 1 3/8Ó x 3 1/2Ó Bolt

17 1 Press Frame

18 2 1/4Ó x 1/2Ó Screw

19 2 Weight Bumper

20 1 Pulley Bracket

21 12 3/8Ó Nylon Locknut

22 4 5/16Ó x 2 1/2Ó Bolt

23 1 Long Cable

24 1 1/4Ó x 2Ó Screw

25 6 Weight

26 1 Weight Pin

27 3 2Ó Square Inner Cap

28 2 12 1/2Ó Pad Tube

29 1 Leg Lever

30 4 5 1/2Ó Pad

31 2 Hand Grip

32 2 1 1/2Ó Square Inner Cap

33 1 5/16Ó x 2 1/4Ó Bolt

34 4 3/4Ó Round Inner Cap

35 1 5/16Ó x 2Ó Eyebolt

36 1 Seat Frame

37 1 Seat Plate

38 1 1/4Ó x 2Ó Carriage Bolt

39 1 Nylon Strap

40 1 Seat Knob

Key No. Qty. Description

41 1 Backrest

42 1 Front Upright

43 2 1/4Ó x 2 1/2Ó Screw

44 6 1 3/4Ó Square Inner Cap

45 2 10Ó Pad

46 2 Press Arm

47 1 Left Arm

48 1 Right Arm

49 6 1Ó Round Inner Cap

50 3 Long Cable Trap

51 2 2Ó Square Outer Cap

52 1 Chain

53 2 Cable Clip

54 1 Lat Bar

55 1 Top Frame

56 1 Rear Upright

57 1 Long ÒUÓ-Bracket

58 1 Short Cable

59 1 3/8Ó x 8Ó Bolt

60 1 5/16Ó x 6Ó Bolt

61 2 1/2Ó x 3/4Ó Spacer

62 2 Weight Guide

63 1 Weight Tube

64 1 Weight Tube Bumper

65 1 1Ó Square Inner Cap

66 5 Cable Trap

67 1 Small ÒUÓ-Bracket

68 1 5/16Ó x 5Ó Bolt

69 4 1Ó Retainer

70 2 1Ó Round Cover Cap

71 4 3/8Ó x 3 3/4Ó Bolt

72 1 5/16Ó x 1 3/4Ó Bolt

73 1 5/8Ó x 9/16Ó Spacer

74 2 1 1/8Ó x 2 1/2Ó Plastic Bushing

75 2 1Ó x 7/8Ó Plastic Bushing

76 1 Top Weight

77 1 3 1/2Ó Low Pulley

# 1 UserÕs Manual

# 1 Exercise Poster

27 12

15 44

15 71

57 58

127

15 71

321

70 47

32 28

30 34

49 49

3034

6855

EXPLODED DRAWINGÑModel No. WESY85101 R1196A

1Ó Round Inner Cap (49)Ð6

1Ó Round Cover Cap (70)Ð2

3/4Ó Round Inner Cap (34)Ð4

1/2Ó x 3/4Ó Spacer (61)Ñ2

5/16Ó x 2Ó Eyebolt (35)Ñ1

1 1/2Ó Square Inner Cap (32)Ñ2

1 3/4Ó Square Inner Cap (44)Ð6

2Ó Square Inner Cap (27)Ð3

2Ó Square Outer Cap (51)Ð2

5/8Ó x 9/16Ó Spacer (73)Ð1

1" Retainer (69)Ð4

3/8" x 2" Bolt (12)Ð3

3/8" x 3 1/2" Bolt (16)Ð1

3/8" x 2 1/2" Bolt (7)Ð3

3/8" x 3 3/4" Bolt (71)Ð4

Cable Clip (53)Ð2

1 1/8" x 2 1/2" Plastic Bushing (74)Ð2

1" x 7/8" Plastic Bushing (75)Ð2

5/16" x 2 1/4" Bolt (33)Ð1

5/16" Nylon Locknut (3)Ð17

1/4" Flat Washer (10)Ð6

5/16" Flat Washer (8)Ð5

3/8" Flat Washer (9)Ð4

1/4" x 2 1/2" Screw (43)Ð2

5/16" x 1 3/4" Bolt (72)Ð1

3/8" Nylon Locknut (21)Ð12

1/4" x 2" Screw (24)Ð1

1/4" Nylon Locknut (2)Ð3

5/16" x 2 1/2" Carriage Bolt (1)Ð2

5/16" x 2 3/4" Carriage Bolt (14)Ð3

1/4" x 1/2" Screw (18)Ð2

5/16" x 2 1/2" Bolt (22)Ð4

1/4" x 2" Carriage Bolt (38)Ð1

5/16" x 5" Bolt (68)Ð1

5/16" x 6" Bolt (60)Ð1

5/16" x 2 3/4" Bolt (11)Ð4

ORDERING REPLACEMENT PARTS

To order replacement parts, simply call our Customer Service Department toll-free at 1-800-225-0653, Monday

through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre-

pared to give the following information:

1. The MODEL NUMBER of the product (WESY85101).

2. The NAME of the product (WEIDER¨8510 Home Gym System).

3. The SERIAL NUMBER of the product (see the front cover of this manual).

4. The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 22 of this manual).

Weider 8510 System Wesy8510 Users Manual .SYOM WESY85101 135112

Weider-8510-Users-Manual-233633 weider-8510-users-manual-233633

8510 to the manual bd6369b9-7ca2-4850-bd5e-47a8dcf8829c

Navigation menu

Versions of this User Manual:

Views

Navigation