Weider Club 290 Power Tower Bench Webe1998 Users Manual PFEL39031 208048

Weider-Webe19980-Owner-S-Manual weider-webe19980-owner-s-manual

2015-05-18

: Weider Weider-Club-290-Power-Tower-Bench-Webe1998-Users-Manual-733439 weider-club-290-power-tower-bench-webe1998-users-manual-733439 weider pdf

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

www.weiderfitness.com
Model No. WEBE1998.0
Serial No.

Write the serial number in the
space above for future reference.
Serial
Number
Decal

QUESTIONS?

As a manufacturer, we are committed to providing complete customer satisfaction. If you have
questions, or if parts are missing,
DO NOT CONTACT THE STORE;
please contact Customer Care.
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:

1-877-992-5999
CALL TOLL-FREE:

Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.weiderservice.com

CAUTION

Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.

USERʼS MANUAL

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible,
call the telephone number on the front
cover of this manual and request a free
replacement decal. Apply the decal in the
location shown. Note: The decal(s) may not
be shown at actual size.

IMPORTANT PRECAUTIONS
WARNING:

To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your exercise tower before using your exercise
tower. ICON assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.

6. Keep children under age 12 and pets away
from your exercise tower at all times.

1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over the age of 35 or
persons with pre-existing health problems.

7. Your exercise tower should not be used by
persons weighing more than 300 lbs.
(136 kg).

2. It is the responsibility of the owner to ensure
that all users of the exercise tower are adequately informed of all precautions.

8. Wear appropriate exercise clothes while
exercising; do not wear loose clothes that
could become caught on your exercise
tower. Always wear athletic shoes for foot
protection while exercising.

3. Your exercise tower is intended for home
use only. Do not use your exercise tower in
a commercial, rental, or institutional setting.

9. The exercise tower is not designed to be
used with weights. Do not use weights or
other forms of resistance with the exercise
tower.

4. Keep the exercise tower indoors, away from
moisture and dust. Place the exercise tower

on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the exercise tower to mount, dismount, and use it.

10. If you feel pain or dizziness while exercising,
stop immediately and begin cooling down.

5. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.

11. Use your exercise tower only as described in
this manual.

BEFORE YOU BEGIN

Thank you for selecting the versatile WEIDER CLUB™
290 POWER TOWER. The exercise tower is
designed to develop the muscles of the upper body.
Whether your goal is to tone your body, build dramatic
muscle size and strength, or improve your cardiovascular system, the exercise tower will help you to
achieve the specific results you want.

this manual. To help us assist you, note the product
model number and serial number before contacting us.
The model number and the location of the serial number decal are shown on the front cover of this manual.

To avoid a registration fee for any service needed
under warranty, you must register the exercise
tower at www.weiderservice.com/registration.

For your benefit, read this manual carefully before
you use the exercise tower. If you have questions
after reading this manual, please see the front cover of

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

ASSEMBLED DIMENSIONS:
Height: 7 ft. (213 cm)
Width: 3 ft. 5 in. (104 cm)
Depth: 3 ft. 8 in. (112 cm)

Pull-up Frame

Arm Pad

Upright

Handles

Backrest

Dip Arm

Footrest
Handle

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts
may have been preattached. If a part is not in the hardware kit, check to see if it has been preattached.

M10 x 95mm Bolt (10)

M10 x 90mm Bolt (26)

M6 Washer (25)

M6 x 70mm Screw (28)

M10 x 65mm Screw (30)

M10 x 30mm
Screw (27)
M10 Washer (24)

M4 x 16mm
Self-tapping
Screw (8)

M10 x 200mm Bolt (31)

M10 Locknut (23)

M10 x 70mm Screw (29)

ASSEMBLY

• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.

Make Assembly Easier

Everything in this manual is designed to ensure
that the exercise tower can be assembled successfully by almost anyone. By setting aside
plenty of time, assembly will go smoothly.

• As you assemble the exercise tower, make sure
all parts are oriented as shown in the drawings.

• Tighten all parts as you assemble them, unless
instructed to do otherwise.

Before beginning assembly, carefully read the
following information and instructions:

• Assembly requires the following tools:

• To hire an authorized service technician to
assemble the exercise tower, call 1-800-4452480.

two adjustable wrenches

one rubber mallet

• Assembly requires two persons.

one standard screwdriver

one Phillips screwdriver

• Because of its size, the exercise tower should be
assembled in the location where it will be used.
Make sure that there is enough clearance to walk
around the exercise tower as you assemble it.

Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.

• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.

Before beginning assembly, make sure you
understand the information in the box
above.

23
24

Orient the Center Base (2) so that the warning
decal is in the position shown. Attach one side of
the Center Base to the Base (1) with two M10 x
90mm Bolts (26), two M10 Washers (24), and two
M10 Locknuts (23). Do not tighten the
Locknuts yet.

Repeat this step for the other side of the
Center Base (2).

24
2
26

Decal

2. Attach the Upright Base (3) to the Center Base
(2) with two M10 x 95mm Bolts (10) and two
M10 Locknuts (23). Do not tighten the
Locknuts yet.

3
23
10

2
3. Attach the Upright Support (5) to the Base (1)
with two M10 x 90mm Bolts (26) and two M10
Locknuts (23). Do not tighten the Locknuts yet.

Insert the Upright (4) into the Upright Base (3).
Attach the Upright and the Upright Support (5) to
the Upright Base with four M10 x 30mm Screws
(27).

See steps 1–3. Tighten the M10 Locknuts (23).

5
3

23
1

4. Attach the Left Handle (12) to the Pull-up Frame
(6) with an M10 x 65mm Screw (30), an M10 x
70mm Screw (29), and two M10 Washers (24).
Press a 50mm Round Inner Cap (14) into the
Pull-up Frame. Make sure that the thick side of
the Round Inner Cap is on the side shown.

4
13

Thick
Side

Attach the Right Handle (13) in the same way.

Thick
Side

12
30

5. Insert the Pull-up Frame (6) into the Upright (4).
Attach the Pull-up Frame with four M10 x 30mm
Screws (27) and four M10 Washers (24).

6. Apply a small portion of the included grease to
the M10 x 200mm Bolt (31). Attach the Dip Arm
(7) to the Upright (4) with the Bolt and an M10
Locknut (23). Do not overtighten the Locknut;
the Dip Arm must pivot easily. Pivot the Dip
Arm to the horizontal position.

Attach the tether on the Pin (22) to the Upright (4)
with an M4 x 16mm Self-tapping Screw (8). Insert
the Pin into the Upright.

7
8

Grease

Tether

7. Attach an Armrest (11) to the Dip Arm (7) with two
M6 x 70mm Screws (28) and two M6 Washers (25).

Wet a Short Foam Grip (21) and the indicated
handle on the Dip Arm (7) with soapy water. Press
an Armrest Cap (19), the Short Foam Grip, and a
28mm Round Inner Cap (15) onto the handle on
the Dip Arm.

Repeat this step for the other side of the Dip
Arm (7).

Handle

8. Attach the Backrest (9) to the Upright (4) with two
M6 x 70mm Screws (28) and two M6 Washers (25).

25
28

8
25

9. Make sure that all parts have been properly
tightened before you use the exercise tower.

ADJUSTMENT

This section explains how to adjust the exercise tower. See the EXERCISE GUIDELINES on page 11 for important information about how to get the most benefit from your exercise program. Also, refer to the accompanying
exercise guide to see the correct form for several exercises.

Make sure all parts are properly tightened each time the exercise tower is used. Replace any worn parts immediately. The exercise tower can be cleaned with a damp cloth and a mild, non-abrasive detergent; do not use solvents.
ADJUSTING THE DIP ARM

To adjust the Dip Arm (7) to the up or down position,
first remove the Pin (22). Move the Dip Arm to the
new position and reinsert the Pin into the Dip Arm.
Note: The Pin must be inserted into the Dip Arm
and the Upright (4) when the Dip Arm is in the up
position, as shown in the drawing. The Pin will be
behind the Upright when the Dip Arm is in the
down position.

EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS

The combination of strength training and aerobic exercise will reshape and strengthen your body, plus develop your heart and lungs.

Muscle Building
To increase the size and strength of your muscles,
push them close to their maximum capacity. Your muscles will continually adapt and grow as you progressively increase the intensity of your exercise. You can
adjust the intensity level of an individual exercise in
two ways:
• by changing the amount of resistance used
• by changing the number of repetitions or sets performed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)

PERSONALIZING YOUR EXERCISE PROGRAM

Determining the appropriate length of time for each
workout, and the numbers of repetitions and sets to
complete, is an individual matter. Avoid overdoing it
during the first few months of your exercise program.
Progress at your own pace and be sensitive to your
bodyʼs signals. If you experience pain or dizziness
while exercising, stop immediately and cool down.
Find out what is wrong before continuing. Remember
that adequate rest and a proper diet are important factors in any exercise program.

The proper amount of resistance for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of resistance that is
right for you. Begin with 3 sets of 8 repetitions for each
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of resistance.

WARMING UP

Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
your body for more strenuous exercise by increasing
circulation, raising your body temperature, and delivering more oxygen to your muscles.

Toning
You can tone your muscles by pushing them to a moderate percentage of their capacity. Select a moderate
amount of resistance and increase the number of repetitions in each set. Complete as many sets of 15 to
20 repetitions as possible without discomfort. Rest for
1 minute after each set. Work your muscles by completing more sets rather than by using high amounts of
resistance.
Weight Loss
To lose weight, use a low amount of resistance and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.

WORKING OUT

Each workout should include 6 to 10 different exercises. Select exercises for every major muscle group,
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from workout to workout.

Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.

Cross Training
Cross training is an efficient way to get a complete and
well-balanced fitness program. An example of a balanced program follows:
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an elliptical exerciser or exercise cycle, on Tuesday and Thursday.
• Rest from both strength training and aerobic exercise
for at least one full day each week to give your body
time to regenerate.

EXERCISE FORM

Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
moving only the appropriate parts of the body.
Exercising in an uncontrolled way will leave you feeling exhausted. On the exercise guide accompanying
this manual you will find photographs showing the correct form for several exercises, and a list of the muscles affected. See the muscle chart on the next page
to find the names of the muscles.

COOLING DOWN

The repetitions in each set should be performed
smoothly and without pausing. The exertion stroke of
each repetition should last about half as long as the
return stroke. Proper breathing is important. Exhale
during the exertion stroke of each repetition and
inhale during the return stroke. Never hold your
breath.

End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.

Rest for a short period of time after each set. The
ideal resting periods follow:
• Rest for three minutes after each set for a muscle
building workout.
• Rest for one minute after each set for a toning workout.
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.

STAYING MOTIVATED

For motivation, keep a record of each workout. Write
the date, the exercises performed, the resistance
used, and the numbers of sets and repetitions completed. Record your weight and key body measurements at the end of every month. The key to achieving
the greatest results is to make exercise a regular and
enjoyable part of your everyday life.

M
N

MUSCLE CHART
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.
O.
P.
Q.
R.
S.
T.
U.
V.
W.
X.

Sternomastoid (neck)
Pectoralis Major (chest)
Biceps (front of arm)
Obliques (waist)
Brachioradials (forearm)
Hip Flexors (upper thigh)
Abductor (outer thigh)
Quadriceps (front of thigh)
Sartorius (front of thigh)
Tibialis Anterior (front of calf)
Soleus (front of calf)
Anterior Deltoid (shoulder)
Rectus Abdominus (stomach)
Adductor (inner thigh)
Trapezius (upper back)
Rhomboideus (upper back)
Posterior Deltoid (shoulder)
Triceps (back of arm)
Latissimus Dorsi (mid back)
Spinae Erectors (lower back)
Gluteus Medius (hip)
Gluteus Maximus (buttocks)
Hamstring (back of leg)
Gastrocnemius (back of calf)

EXERCISE LOG

Make copies of this page, and use the copies to schedule and record your strength and aerobic workouts.
Scheduling and recording your workouts will help you to make exercise a regular and enjoyable part of your life.

Strength
Date:

Exercise
1.

Lbs. Sets Reps

Strength
Date:

10.

Exercise

Exercise
1.

Time

Lbs. Sets Reps

Strength
Date:

Exercise
1.

5.
Exercise

Lbs. Sets Reps

Exercise

4.
Aerobic
Date:

Distance Speed

10.

Time

Lbs. Sets Reps

Distance Speed

Lbs. Sets Reps

Exercise
6.
7.

5.
Aerobic
Date:

6.
7.

Aerobic
Date:

Lbs. Sets Reps

Exercise

10.

Exercise

Time

Distance Speed

PART LIST—Model No. WEBE1998.0
Key No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

Qty.
1
1
1
1
1
1
1
1
1
2
2
1
1
2
8
2
1

Description

Key No.

Base
Center Base
Upright Base
Upright
Upright Support
Pull-up Frame
Dip Arm
M4 x 16mm Self-tapping Screw
Backrest
M10 x 95mm Bolt
Armrest
Left Handle
Right Handle
50mm Round Inner Cap
28mm Round Inner Cap
70mm x 50mm Outer Cap
50mm x 127mm Inner Cap

18
19
20
21
22
23
24
25
26
27
28
29
30
31
*
*
*

Qty.
2
2
6
2
1
9
12
6
6
8
6
2
2
1
—
—
—

Description

50mm Round Outer Cap
Armrest Cap
Long Foam Grip
Short Foam Grip
Pin
M10 Locknut
M10 Washer
M6 Washer
M10 x 90mm Bolt
M10 x 30mm Screw
M6 x 70mm Screw
M10 x 70mm Screw
M10 x 65mm Screw
M10 x 200mm Bolt
Userʼs Manual
Exercise Guide
Grease Packet

R1108A

Note: Specifications are subject to change without notice. See the back cover of this manual for information
about ordering replacement parts. *These parts are not illustrated.

EXPLODED DRAWING—Model No. WEBE1998.0
29
15 20
14

28
22

26
23

5
2

20
16
15

23
25

11
19

R1108A

1
16

ORDERING REPLACEMENT PARTS

To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)

• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING
near the end of this manual)

LIMITED WARRANTY

ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. Parts and labor are warranted for ninety (90) days
from the date of purchase.

This warranty extends only to the original purchaser. ICONʼs obligation under this warranty is limited to
repairing or replacing, at ICONʼs option, the product through one of its authorized service centers. All
repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped to
a service center, freight charges to and from the service center will be the customerʼs responsibility. For
replacement parts shipped while the product is under warranty, the customer will be responsible for a
minimal handling charge. For in-home service, the customer will be responsible for a minimal trip
charge. This warranty does not extend to any damage to a product caused by or attributable to freight
damage, abuse, misuse, improper or abnormal usage, or repairs not provided by an ICON authorized
service center; products used for commercial or rental purposes; or products used as store display
models. No other warranty beyond that specifically set forth above is authorized by ICON.

ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in connection with the use or performance of the product; damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, or costs of removal or installation; or
other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.

The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties
of merchantability or fitness for a particular purpose are limited in their scope and duration to the terms
set forth herein. Some states do not allow limitations on how long an implied warranty lasts.
Accordingly, the above limitation may not apply to you.

This warranty gives you specific legal rights. You may also have other rights that vary from state to state.
ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813

Part No. 273533 R1108A

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2008:11:24 08:34:24Z
Creator Tool                    : QuarkXPress(R) 7.31
Modify Date                     : 2008:11:24 08:36:21-07:00
Metadata Date                   : 2008:11:24 08:36:21-07:00
Producer                        : QuarkXPress(R) 7.31
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments
Format                          : application/pdf
Title                           : PFEL39031-208048
Document ID                     : uuid:a527c550-ba3d-11dd-8829-0017f2050332
Instance ID                     : uuid:a527d5ea-ba3d-11dd-8829-0017f2050332
Page Count                      : 16
Creator                         : QuarkXPress(R) 7.31

EXIF Metadata provided by EXIF.tools

Weider Club 290 Power Tower Bench Webe1998 Users Manual PFEL39031 208048

Weider-Webe19980-Owner-S-Manual weider-webe19980-owner-s-manual

Navigation menu

Versions of this User Manual:

Views

Navigation