Weider Club Sidekick Bench Webe2496 Users Manual

Weider-Webe24961-Owner-S-Manual weider-webe24961-owner-s-manual

2015-05-18

: Weider Weider-Club-Sidekick-Bench-Webe2496-Users-Manual-733452 weider-club-sidekick-bench-webe2496-users-manual-733452 weider pdf

Open the PDF directly: View PDF PDF.
Page Count: 16

Model No. WEBE2496.1
Serial No.
Write the serial number in the
space above for future reference.
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
missing or damaged, PLEASE
DO NOT CONTACT THE STORE.
For assistance, contact our
Customer Service Department.
CALL TOLL-FREE:
1-877-992-5999
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.weiderservice.com
USER’S MANUAL
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial Number Decal (Under Seat)
Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
Visit our website at
www.healthrider.com
new products, prizes,
fitness tips, and much more!
Visit our website at
www.nordictrack.com
new products, prizes,
fitness tips, and much more!
Visit our website at
www.weiderfitness.com
new products, prizes,
fitness tips, and much more!
V
2
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
TABLE OF CONTENTS
WEIDER is a registered trademark of ICON IP, Inc.
WARNING DECAL PLACEMENT
The decals shown here have
been applied to the weight
bench. If a decal is missing or
illegible, call the telephone
number on the front cover of
this manual and request a
free replacement decal. Apply
the decal in the location
shown. Note: The decals may
not be shown at actual size.
3
1. Before beginning this or any exercise pro-
gram, consult your physician. This is espe-
cially important for persons over the age of
35 or persons with pre-existing health prob-
lems. Read all instructions before using.
2. Read all instructions in this manual and all
warnings on the weight bench before using
the weight bench. Use the weight bench and
the weight stand only as described in this
manual.
3. It is the responsibility of the owner to ensure
that all users of the weight bench and the
weight stand are adequately informed of all
precautions.
4. The weight bench and the weight stand are
intended for home use only.Do not use the
weight bench or the weight stand in any
commercial, rental, or institutional setting.
5. Keep the weight bench and the weight stand
indoors, away from moisture and dust. Place
the weight bench and the weight stand on a
level surface, with a mat beneath it to protect
the floor or carpet.
6. Make sure that there is enough clearance
around the weight bench to mount, dis-
mount, and use the weight bench.
7. Inspect and properly tighten all parts regular-
ly. Replace any worn parts immediately.
8. Keep hands and feet away from moving parts.
Do not place your fingers between the dumb-
bells and the weight stand.
9. Keep children under age12 and pets away
from the weight bench and the weight stand
at all times.
10. Always wear athletic shoes for foot protec-
tion while exercising.
11. The weight bench is designed to support a
maximum user weight of 300 lbs. (136 kg)
and a maximum total weight of 510 lbs. (231
kg) Do not use the weight bench with more
than 210 lbs. (95 kg) of weight.
12. Place only the included dumbbells on the
weight stand.
13. If you feel pain or dizziness while exercising,
stop immediately and begin cooling down.
IMPORTANT PRECAUTIONS
WARNING: Toreduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on the weight bench before using the weight bench.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of the weight bench.
4
Adjustable-weight
Dumbbells
Tray Support
Post Knob
Tray
Backrest
Large Plate
Base Knob
Bench Stabilizer
Bench Frame
Backrest Bracket
Seat
Upright
Thank you for selecting the versatile WEIDER®CLUB
SIDEKICK™ weight bench. The weight bench offers a
selection of exercise stations designed to develop the
major muscles of the upper body. Whether your goal is
to tone your body, build dramatic muscle size and
strength, or improve your cardiovascular system, the
weight bench will help you to achieve the specific
results you want.
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, please note the product
model number and serial number before calling. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Toavoid a registration fee for any service needed
under warranty, you must register the weight
bench at www.weiderservice.com/registration.
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
ASSEMBLED DIMENSIONS:
Height: 48 in. (122 cm)
Width: 44 in. (112 cm)
Depth: 52 in. (132 cm)
BEFORE YOU BEGIN
5
M10 Nylon
Locknut (34)
M8 Washer (41)
M8 Nylon
Locknut (43)
M8 x 90mm Bolt (38)
M6 Washer (44)
M10 x 180mm Bolt (32)
M6 x 15mm
Screw (48)
M8 x 15mm
Screw (36)
M4 x 15mm
Screw (46)
M10 x 65mm Carriage Bolt (42)
M6 x 55mm Screw (35)
M8 x 70mm Carriage Bolt (37)
M8 x 65mm Carriage Bolt (40)
M6 x 35mm Screw (49)
M8 x 40mm Bolt (50)
M8 x 45mm Bolts (39)
M10 Washer (45)
M5 x 15mm
Screw (33)
PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may
have been pre-assembled. If a part is not in the parts bag, check to see if it has been preassembled.
6
1.
Insert two M8 x 70mm Carriage Bolts (37) up
through the Bench Stabilizer (3). Attach a
Small Plate (12) to the Bench Stabilizer with
two M4 x 15mm Screws (46). Attach the other
Small Plate (12) to the Bench Stabilizer in the
same way.
1
Before beginning assembly, make sure
that you understand the information in
the box above. For help identifying
small parts, see page 5.
12
37
3
12
Warning
Decal
46
Before beginning assembly, carefully read the fol-
lowing information and instructions:
• To hire an authorized service technician to
assemble the weight bench, call 1-800-445-2480.
• Assembly requires two persons.
• Because of its size, the weight bench should be
assembled in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• Assembly requires the included hex key(s)
and the following tools (not included):
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Assembly Easier
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by almost anyone. However, the weight
bench has many parts and the assembly
process will take time. By setting aside plenty of
time, assembly will go smoothly.
ASSEMBLY
7
3. Attach the Front Leg (24) to the Bench Frame
(4) with four M8 x 15mm Screws (36).
See step 2 and tighten the M8 Nylon
Locknuts (43).
4. Attach the Backrest Bracket (14) to the two
Backrest Frames (15) with four M8 x 40mm
Bolts (50), four M8 Washers (41), and four
M8 Nylon Locknuts (43). Do not tighten the
Nylon Locknuts yet.
3
4
24
36 36
50
50
41
41
43
43
15
14
4
2. Attach the Bench Frame (4) to the Bench
Stabilizer (3) with the M8 x 70mm Carriage
Bolts (37) and two M8 Nylon Locknuts (43).
Do not tighten the Nylon Locknuts yet.
43
37
43
4
3
2
8
6. Attach the Seat (17) and the Seat Carriage
(11) to the Seat Frame (5) with two M6 x
15mm Screws (48), two M6 x 35mm Screws
(49), and two M6 Washers (44).
7. Insert the Backrest Bracket (14) into the
Bench Frame (4). Apply a portion of the
included grease to an M10 x 180mm Bolt
(32). Attach the Backrest Frames (15) and the
Seat Carriage (11) to the Bench Frame with
the Bolt, two M10 Washers (45), and an M10
Nylon Locknut (34). Do not overtighten the
Nylon Locknut; the Backrest Frames and
the Seat Carriage must pivot freely.
Tighten the Backrest Knob (28) into the
Bench Frame (4). Make sure that the
Backrest Knob engages a hole in the
Backrest Bracket (14).
Tighten the M8 Nylon Locknuts (43) used
in step 4 and the M6 x 55mm Screws (35)
used in step 5.
617
11
44
49
48
5
11
34 45
45
32
15
14
28
4
7
5. Attach the Backrest (16) to the Backrest
Frames (15) with four M6 x 55mm Screws
(35) and four M6 Washers (44). Donot tight-
en the Screws yet.
44
35
44
35
5
16
15
9
9. Insert two M8 x 65mm Carriage Bolts (40) up
through a Rack Stabilizer (1). Attach the Left
Post (6) and the Left Base (2) to the Rack
Stabilizer with the Carriage Bolts, two M8 x
90mm Bolts (38), and four M8 Nylon
Locknuts (43).
Repeat this step with the other Rack
Stabilizer (not shown), the Right Base (not
shown), and the Right Post (not shown).
9
6
43
43
2
1
40
38
43
43
10. Insert the Right Base (51) into the Left Base
(2). Insert an M10 x 65mm Carriage Bolt (42)
up through the Left and Right Bases. Next,
tighten the Base Knob (31) onto the Carriage
Bolt.
10
51 31
42
2
11. Attach a Tray (18) to a Tray Support (10) with
two M8 x 45mm Bolts (39) and two M8 Nylon
Locknuts (43). Next, insert the Tray Support
(10) into the Left Upright (8).
Repeat this step for the other side of the
weight rack.
11 39
18
10
43
43
8
12. Make sure that all parts are properly tight-
ened before you use the weight bench
and the weight rack. The use of all remain-
ing parts will be explained in ADJUST-
MENT on page 10.
8. Insert the Seat Pin (29) into the Seat Frame
(5) and through the Bench Frame (4). 8
4
29
5
10
This section explains how to adjust the weight bench. See the accompanying exercise guide to see the correct
form for each exercise. Make sure that all parts are properly tightened each time the weight bench is used.
Replace any worn parts immediately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive
detergent. Do not use solvents.
ADJUSTING THE BACKREST AND THE SEAT
To adjust the position of the Backrest (16), pull
out on the Backrest Knob (28). Then, adjust the
angle of the Backrest and reinsert the Backrest
Knob.
To adjust the angle of the Seat (17), pull the Seat
Pin (29) out of the Seat Frame (5) and move the
Seat up or down. Then, reinsert the Seat Pin
through the Seat Frame.
14
29
5
17
28
16
ADJUSTMENT
18
19
18
19
10
30
30
52
31
8
21
9
6
7
ADJUSTING THE POSITION OF THE TRAYS
Toadjust the height of the Trays (18), first remove
the Adjustable-Weight Dumbbells (19). Next,
loosen the Post Knobs (30) and raise or lower the
Left and Right Uprights (8, 9) to the desired
height. Then, retighten the Post Knobs. Make
sure that the Post Knobs are inserted into
adjustment holes in the Uprights; in addition,
make sure that the Uprights are at the same
height.
To adjust the angles of the Trays (18), first
remove the Adjustable-Weight Dumbbells (19).
Next, lift the Tray Supports (10) and turn them to
the desired angles. Then, set the pins on the Tray
Supports into the desired notches in the Left and
Right Upright Bushings (21, 52).
To adjust the width of the Trays (18), loosen the
Base Knob (31) and slide the Left and Right
Posts (6, 7) closer together or farther apart. When
the Posts are at the desired width, tighten the
Base Knob.
Pin
Notches
11
USING THE WEIGHT BENCH WITH THE
WEIGHT RACK
The weight bench can be used with the weight
rack in the position shown for some exercises. The
weight rack can also be set in front of the weight
bench for other exercises.
HOW TO USE THE ADJUSTABLE-WEIGHT
DUMBBELLS
Each handle can hold two, four, six, or eight
weight plates. Always attach the same number
of weight plates to both sides of the handle.
To select the desired number of weight plates, first
set a dumbbell on a Tray (18) as shown. Next, lift
one of the selector pins, slide the selector pin to
one of the adjustment holes between the weight
plates, and then release the selector pin. Rock the
selector pin from side to side to make sure that it
is fully inserted into one of the adjustment holes.
Adjust the other selector pin on the dumbbell in
the same way.
To use the dumbbell, lift it straight up off the Tray
(18), making sure that the unattached weight
plates remain in the Tray.
Handle
Weight
Plates
Selector
Pin
18
12
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
Muscle Building
Toincrease the size and strength of your muscles,
push them close to their maximum capacity. Your mus-
cles will adapt and grow as you progressively increase
the intensity of your exercise. You can adjust the inten-
sity level of an individual exercise in two ways:
• by changing the amount of weight used
•by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
The proper amount of weight for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of weight that is right
for you. Begin with 3 sets of 8 repetitions for each
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty,increase the amount of weight.
Toning
You can tone your muscles by pushing them to a mod-
erate percentage of their capacity.Select a moderate
amount of weight and increase the number of repeti-
tions in each set. Complete as many sets of 15 to 20
repetitions as possible without discomfort. Rest for 1
minute after each set. Work your muscles by complet-
ing more sets rather than by using high amounts of
weight.
Weight Loss
Tolose weight, use a low amount of weight and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
Cross Training
Cross training is an efficient way to get a complete and
well-balanced fitness program. An example of a bal-
anced program follows:
•Plan strength training workouts on Monday,
Wednesday, and Friday.
•Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an exercise cycle
or an elliptical exerciser,on Tuesday and Thursday.
•Rest from both strength training and aerobic exercise
for at least one full day each week to give your body
time to regenerate.
The combination of strength training and aerobic exer-
cise will reshape and strengthen your body, plus devel-
op your heart and lungs.
PERSONALIZING YOUR EXERCISE PROGRAM
Determining the appropriate length of time for each
workout, and the numbers of repetitions and sets to
complete, is an individual matter. It is important to
avoid overdoing it during the first few months of your
exercise program. Progress at your own pace and be
sensitive to your body’s signals. If you experience pain
or dizziness at any time while exercising, stop immedi-
ately and begin cooling down. Find out what is wrong
before continuing. Remember that adequate rest and a
proper diet are important factors in any exercise pro-
gram.
WARMING UP
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
your body for more strenuous exercise by increasing
circulation, raising your body temperature and deliver-
ing more oxygen to your muscles.
WORKING OUT
Each workout should include 6 to 10 different exercis-
es. Select exercises for every major muscle group,
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from session to session.
Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
moving only the appropriate parts of the body.
Exercising in an uncontrolled way will leave you feel-
ing exhausted. On the exercise guide accompanying
this manual you will find photographs showing the cor-
rect form for several exercises, and a list of the mus-
cles affected. Refer to the muscle chart on the next
page to find the names of the muscles.
The repetitions in each set should be performed
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
during the return stroke. Never hold your breath.
13
Rest for a short period of time after each set. The
ideal resting periods follow:
•Rest for three minutes after each set for a muscle
building workout.
•Rest for one minute after each set for a toning work-
out.
•Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.
STAYING MOTIVATED
For motivation, keep a record of each workout. List the
date, the exercises performed, the resistance used,
and the numbers of sets and repetitions completed.
Record your weight and key body measurements at
the end of every month. Remember, the key to achiev-
ing the greatest results is to make exercise a regular
and enjoyable part of your everyday life.
O
P
Q
R
S
T
U
V
X
W
N
M
J
G
F
H
I
K
E
C
D
B
A
L
MUSCLE CHART
A. Sternomastoid (neck)
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
L. Anterior Deltoid (shoulder)
M. Rectus Abdominus (stomach)
N. Adductor (inner thigh)
O. Trapezius (upper back)
P. Rhomboideus (upper back)
Q. Posterior Deltoid (shoulder)
R. Triceps (back of arm)
S. Latissimus Dorsi (mid back)
T. Spinae Erectors (lower back)
U. Gluteus Medius (hip)
V. Gluteus Maximus (buttocks)
W. Hamstring (back of leg)
X. Gastrocnemius (back of calf)
14
Key No. Qty. Description Key No. Qty. Description
1 2 Rack Stabilizer
2 1 Left Base
3 1 Bench Stabilizer
4 1 Bench Frame
5 1 Seat Frame
6 1 Left Post
7 1 Right Post
8 1 Left Upright
9 1 Right Upright
10 2 Tray Support
11 1 Seat Carriage
12 2 Small Plate
13 1 Right Post Bushing
14 1 Backrest Bracket
15 2 Backrest Frame
16 1 Backrest
17 1 Seat
18 2 Tray
19 2 Adjustable-weight Dumbbell
20 16 Weight Plate
21 2 Left Upright Bushing
22 1 Left Post Bushing
23 2 56mm Square Cap
24 1 Front Leg
25 4 50mm x 75mm Endcap
26 4 60mm Square Cap
27 4 40mm x 25mm Cap
28 1 Backrest Knob
29 1 Seat Pin
30 2 Post Knob
31 1 Base Knob
32 1 M10 x 180mm Bolt
33 4 M5 x 15mm Screw
34 1 M10 Nylon Locknut
35 4 M6 x 55mm Screw
36 4 M8 x 15mm Screw
37 2 M8 x 70mm Carriage Bolt
38 4 M8 x 90mm Bolt
39 4 M8 x 45mm Bolt
40 4 M8 x 65mm Carriage Bolt
41 4 M8 Washer
42 1 M10 x 65mm Carriage Bolt
43 18 M8 Nylon Locknut
44 6 M6 Washer
45 2 M10 Washer
46 5 M4 x 15mm Screw
47 1 40mm x 20mm Endcap
48 2 M6 x 15mm Screw
49 2 M6 x 35mm Screw
50 4 M8 x 40mm Bolt
51 1 Right Base
52 1 Right Upright Bushing
* – User’s Manual
* – Hex Key
* – Grease Packet
* – Exercise Guide
PART LIST—Model No. WEBE2496.1 R0607A
Note: Specifications are subject to change without notice. See the back cover of this manual for information
about ordering replacement parts. *These parts are not illustrated.
15
EXPLODED DRAWING—Model No. WEBE2496.1 R0607A
LIMITED WARRANTY
Part No. 255667 R0607A Printed in China © 2007 ICON IP, Inc.
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and mate-
rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing
or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for which
warranty claims are made must be pre-authorized by ICON. If the product is shipped to a service center,
freight charges to and from the service center will be the customer’s responsibility. For in-home service, the
customer will be responsible for a minimal trip charge. This warranty does not extend to any product or dam-
age to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or
repairs not provided by an ICON authorized service center; products used for commercial or rental purposes;
or products used as store display models. No other warranty beyond that specifically set forth above is author-
ized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection
with the use or performance of the product or damages with respect to any economic loss, loss of property,
loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other consequential
damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or conse-
quential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
ORDERING REPLACEMENT PARTS
Toorder replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro-
vide the following information when contacting us:
•the model number and serial number of the product (see the front cover of the manual)
•the name of the product (see the front cover of this manual)
•the key number and description of the part(s) (see the PART LIST and the EXPLODED DRAWING near the
end of this manual)

Navigation menu