Weider Club Sidekick Bench Webe2496 Users Manual

Weider-Webe24961-Owner-S-Manual weider-webe24961-owner-s-manual

2015-05-18

: Weider Weider-Club-Sidekick-Bench-Webe2496-Users-Manual-733452 weider-club-sidekick-bench-webe2496-users-manual-733452 weider pdf

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

Model No. WEBE2496.1
Serial No.
Write the serial number in the
space above for future reference.

USER’S MANUAL

Visit our website at
Serial Number Decal (Under Seat)

QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if parts are
missing or damaged, PLEASE
DO NOT CONTACT THE STORE.
For assistance, contact our
Customer Service Department.

CALL TOLL-FREE:

www.proform.com
new products, prizes,
fitness tips, and much more!

Visit our website at
www.healthrider.com
new products, prizes,
fitness tips, and much more!

1-877-992-5999
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.weiderservice.com

Visit our website at
www.nordictrack.com
new products, prizes,
fitness tips, and much more!

CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.

Visit our website at
www.weiderfitness.com
new products, prizes,
fitness tips, and much more!

TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

WARNING DECAL PLACEMENT
The decals shown here have
been applied to the weight
bench. If a decal is missing or
illegible, call the telephone
number on the front cover of
this manual and request a
free replacement decal. Apply
the decal in the location
shown. Note: The decals may
not be shown at actual size.

WEIDER is a registered trademark of ICON IP, Inc.

IMPORTANT PRECAUTIONS
WARNING:

To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on the weight bench before using the weight bench.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of the weight bench.
1. Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of
35 or persons with pre-existing health problems. Read all instructions before using.

around the weight bench to mount, dismount, and use the weight bench.
7. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.

2. Read all instructions in this manual and all
warnings on the weight bench before using
the weight bench. Use the weight bench and
the weight stand only as described in this
manual.

8. Keep hands and feet away from moving parts.
Do not place your fingers between the dumbbells and the weight stand.
9. Keep children under age12 and pets away
from the weight bench and the weight stand
at all times.

3. It is the responsibility of the owner to ensure
that all users of the weight bench and the
weight stand are adequately informed of all
precautions.

10. Always wear athletic shoes for foot protection while exercising.

4. The weight bench and the weight stand are
intended for home use only. Do not use the
weight bench or the weight stand in any
commercial, rental, or institutional setting.

11. The weight bench is designed to support a
maximum user weight of 300 lbs. (136 kg)
and a maximum total weight of 510 lbs. (231
kg) Do not use the weight bench with more
than 210 lbs. (95 kg) of weight.

5. Keep the weight bench and the weight stand
indoors, away from moisture and dust. Place
the weight bench and the weight stand on a
level surface, with a mat beneath it to protect
the floor or carpet.

12. Place only the included dumbbells on the
weight stand.
13. If you feel pain or dizziness while exercising,
stop immediately and begin cooling down.

6. Make sure that there is enough clearance

BEFORE YOU BEGIN
Thank you for selecting the versatile WEIDER® CLUB
SIDEKICK™ weight bench. The weight bench offers a
selection of exercise stations designed to develop the
major muscles of the upper body. Whether your goal is
to tone your body, build dramatic muscle size and
strength, or improve your cardiovascular system, the
weight bench will help you to achieve the specific
results you want.

manual. To help us assist you, please note the product
model number and serial number before calling. The
model number and the location of the serial number
decal are shown on the front cover of this manual.

For your benefit, read this manual carefully before
using the weight bench. If you have questions after
reading this manual, please see the front cover of this

Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.

To avoid a registration fee for any service needed
under warranty, you must register the weight
bench at www.weiderservice.com/registration.

ASSEMBLED DIMENSIONS:
Height: 48 in. (122 cm)
Width: 44 in. (112 cm)
Depth: 52 in. (132 cm)

Backrest

Adjustable-weight
Dumbbells
Tray Support
Upright
Bench Frame
Bench Stabilizer

Seat

Tray
Base Knob

Post Knob

Large Plate
Backrest Bracket

PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may
have been pre-assembled. If a part is not in the parts bag, check to see if it has been preassembled.

M4 x 15mm
Screw (46)

M8 x 45mm Bolts (39)

M10 Nylon
Locknut (34)

M5 x 15mm
Screw (33)

M8 Washer (41)

M6 x 15mm
Screw (48)

M6 x 55mm Screw (35)

M8 x 15mm
Screw (36)

M10 x 65mm Carriage Bolt (42)

M8 x 65mm Carriage Bolt (40)

M6 x 35mm Screw (49)
M6 Washer (44)

M8 x 70mm Carriage Bolt (37)

M10 Washer (45)

M8 x 90mm Bolt (38)

M10 x 180mm Bolt (32)

M8 Nylon
Locknut (43)

M8 x 40mm Bolt (50)

ASSEMBLY
packing materials. Do not dispose of the packing
materials until assembly is completed.

Make Assembly Easier
Everything in this manual is designed to ensure
that the weight bench can be assembled successfully by almost anyone. However, the weight
bench has many parts and the assembly
process will take time. By setting aside plenty of
time, assembly will go smoothly.

• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.

Before beginning assembly, carefully read the following information and instructions:

• Assembly requires the included hex key(s)
and the following tools (not included):

• To hire an authorized service technician to
assemble the weight bench, call 1-800-445-2480.

two adjustable wrenches

• Assembly requires two persons.

one rubber mallet

• Because of its size, the weight bench should be
assembled in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight bench as you assemble it.

one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.

• Place all parts in a cleared area and remove the

Before beginning assembly, make sure
that you understand the information in
the box above. For help identifying
small parts, see page 5.

1
3

Warning
Decal

12
Insert two M8 x 70mm Carriage Bolts (37) up
through the Bench Stabilizer (3). Attach a
Small Plate (12) to the Bench Stabilizer with
two M4 x 15mm Screws (46). Attach the other
Small Plate (12) to the Bench Stabilizer in the
same way.

12
46

2. Attach the Bench Frame (4) to the Bench
Stabilizer (3) with the M8 x 70mm Carriage
Bolts (37) and two M8 Nylon Locknuts (43).
Do not tighten the Nylon Locknuts yet.

43
4
43

3
37

3. Attach the Front Leg (24) to the Bench Frame
(4) with four M8 x 15mm Screws (36).

See step 2 and tighten the M8 Nylon
Locknuts (43).
4

4. Attach the Backrest Bracket (14) to the two
Backrest Frames (15) with four M8 x 40mm
Bolts (50), four M8 Washers (41), and four
M8 Nylon Locknuts (43). Do not tighten the
Nylon Locknuts yet.

41
50
41

15
14
43

5. Attach the Backrest (16) to the Backrest
Frames (15) with four M6 x 55mm Screws
(35) and four M6 Washers (44). Do not tighten the Screws yet.

16
44

44
15
35

6. Attach the Seat (17) and the Seat Carriage
(11) to the Seat Frame (5) with two M6 x
15mm Screws (48), two M6 x 35mm Screws
(49), and two M6 Washers (44).

6
17

11
44
49

7. Insert the Backrest Bracket (14) into the
Bench Frame (4). Apply a portion of the
included grease to an M10 x 180mm Bolt
(32). Attach the Backrest Frames (15) and the
Seat Carriage (11) to the Bench Frame with
the Bolt, two M10 Washers (45), and an M10
Nylon Locknut (34). Do not overtighten the
Nylon Locknut; the Backrest Frames and
the Seat Carriage must pivot freely.

28
11 15

Tighten the Backrest Knob (28) into the
Bench Frame (4). Make sure that the
Backrest Knob engages a hole in the
Backrest Bracket (14).

14
4

Tighten the M8 Nylon Locknuts (43) used
in step 4 and the M6 x 55mm Screws (35)
used in step 5.

45
32

8. Insert the Seat Pin (29) into the Seat Frame
(5) and through the Bench Frame (4).

4
5

9. Insert two M8 x 65mm Carriage Bolts (40) up
through a Rack Stabilizer (1). Attach the Left
Post (6) and the Left Base (2) to the Rack
Stabilizer with the Carriage Bolts, two M8 x
90mm Bolts (38), and four M8 Nylon
Locknuts (43).

9
6
43

Repeat this step with the other Rack
Stabilizer (not shown), the Right Base (not
shown), and the Right Post (not shown).

2
43
1

38
40

10. Insert the Right Base (51) into the Left Base
(2). Insert an M10 x 65mm Carriage Bolt (42)
up through the Left and Right Bases. Next,
tighten the Base Knob (31) onto the Carriage
Bolt.

10
51
31
2
42

11. Attach a Tray (18) to a Tray Support (10) with
two M8 x 45mm Bolts (39) and two M8 Nylon
Locknuts (43). Next, insert the Tray Support
(10) into the Left Upright (8).

Repeat this step for the other side of the
weight rack.

10
18
43

12. Make sure that all parts are properly tightened before you use the weight bench
and the weight rack. The use of all remaining parts will be explained in ADJUSTMENT on page 10.

ADJUSTMENT
This section explains how to adjust the weight bench. See the accompanying exercise guide to see the correct
form for each exercise. Make sure that all parts are properly tightened each time the weight bench is used.
Replace any worn parts immediately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive
detergent. Do not use solvents.
ADJUSTING THE BACKREST AND THE SEAT
To adjust the position of the Backrest (16), pull
out on the Backrest Knob (28). Then, adjust the
angle of the Backrest and reinsert the Backrest
Knob.

To adjust the angle of the Seat (17), pull the Seat
Pin (29) out of the Seat Frame (5) and move the
Seat up or down. Then, reinsert the Seat Pin
through the Seat Frame.

28
5
14
29

ADJUSTING THE POSITION OF THE TRAYS
To adjust the height of the Trays (18), first remove
the Adjustable-Weight Dumbbells (19). Next,
loosen the Post Knobs (30) and raise or lower the
Left and Right Uprights (8, 9) to the desired
height. Then, retighten the Post Knobs. Make
sure that the Post Knobs are inserted into
adjustment holes in the Uprights; in addition,
make sure that the Uprights are at the same
height.

19
18
10

52
9
30

To adjust the angles of the Trays (18), first
remove the Adjustable-Weight Dumbbells (19).
Next, lift the Tray Supports (10) and turn them to
the desired angles. Then, set the pins on the Tray
Supports into the desired notches in the Left and
Right Upright Bushings (21, 52).

21
8

7
31
6

To adjust the width of the Trays (18), loosen the
Base Knob (31) and slide the Left and Right
Posts (6, 7) closer together or farther apart. When
the Posts are at the desired width, tighten the
Base Knob.

Notches

USING THE WEIGHT BENCH WITH THE
WEIGHT RACK
The weight bench can be used with the weight
rack in the position shown for some exercises. The
weight rack can also be set in front of the weight
bench for other exercises.

HOW TO USE THE ADJUSTABLE-WEIGHT
DUMBBELLS

Weight
Plates

Each handle can hold two, four, six, or eight
weight plates. Always attach the same number
of weight plates to both sides of the handle.
To select the desired number of weight plates, first
set a dumbbell on a Tray (18) as shown. Next, lift
one of the selector pins, slide the selector pin to
one of the adjustment holes between the weight
plates, and then release the selector pin. Rock the
selector pin from side to side to make sure that it
is fully inserted into one of the adjustment holes.
Adjust the other selector pin on the dumbbell in
the same way.

Handle

Selector
Pin

To use the dumbbell, lift it straight up off the Tray
(18), making sure that the unattached weight
plates remain in the Tray.

EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS

PERSONALIZING YOUR EXERCISE PROGRAM

Muscle Building
To increase the size and strength of your muscles,
push them close to their maximum capacity. Your muscles will adapt and grow as you progressively increase
the intensity of your exercise. You can adjust the intensity level of an individual exercise in two ways:
• by changing the amount of weight used
• by changing the number of repetitions or sets performed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)

Determining the appropriate length of time for each
workout, and the numbers of repetitions and sets to
complete, is an individual matter. It is important to
avoid overdoing it during the first few months of your
exercise program. Progress at your own pace and be
sensitive to your body’s signals. If you experience pain
or dizziness at any time while exercising, stop immediately and begin cooling down. Find out what is wrong
before continuing. Remember that adequate rest and a
proper diet are important factors in any exercise program.

The proper amount of weight for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of weight that is right
for you. Begin with 3 sets of 8 repetitions for each
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of weight.

WARMING UP

Toning
You can tone your muscles by pushing them to a moderate percentage of their capacity. Select a moderate
amount of weight and increase the number of repetitions in each set. Complete as many sets of 15 to 20
repetitions as possible without discomfort. Rest for 1
minute after each set. Work your muscles by completing more sets rather than by using high amounts of
weight.

WORKING OUT

Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
your body for more strenuous exercise by increasing
circulation, raising your body temperature and delivering more oxygen to your muscles.

Each workout should include 6 to 10 different exercises. Select exercises for every major muscle group,
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from session to session.
Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.

Weight Loss
To lose weight, use a low amount of weight and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.

EXERCISE FORM

Cross Training
Cross training is an efficient way to get a complete and
well-balanced fitness program. An example of a balanced program follows:
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an exercise cycle
or an elliptical exerciser, on Tuesday and Thursday.
• Rest from both strength training and aerobic exercise
for at least one full day each week to give your body
time to regenerate.
The combination of strength training and aerobic exercise will reshape and strengthen your body, plus develop your heart and lungs.

Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
moving only the appropriate parts of the body.
Exercising in an uncontrolled way will leave you feeling exhausted. On the exercise guide accompanying
this manual you will find photographs showing the correct form for several exercises, and a list of the muscles affected. Refer to the muscle chart on the next
page to find the names of the muscles.
The repetitions in each set should be performed
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
during the return stroke. Never hold your breath.

slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.

Rest for a short period of time after each set. The
ideal resting periods follow:
• Rest for three minutes after each set for a muscle
building workout.
• Rest for one minute after each set for a toning workout.
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.

STAYING MOTIVATED
For motivation, keep a record of each workout. List the
date, the exercises performed, the resistance used,
and the numbers of sets and repetitions completed.
Record your weight and key body measurements at
the end of every month. Remember, the key to achieving the greatest results is to make exercise a regular
and enjoyable part of your everyday life.

COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move

MUSCLE CHART
O
A

P
L

T
F
G

A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.
O.
P.
Q.
R.
S.
T.
U.
V.
W.
X.

Sternomastoid (neck)
Pectoralis Major (chest)
Biceps (front of arm)
Obliques (waist)
Brachioradials (forearm)
Hip Flexors (upper thigh)
Abductor (outer thigh)
Quadriceps (front of thigh)
Sartorius (front of thigh)
Tibialis Anterior (front of calf)
Soleus (front of calf)
Anterior Deltoid (shoulder)
Rectus Abdominus (stomach)
Adductor (inner thigh)
Trapezius (upper back)
Rhomboideus (upper back)
Posterior Deltoid (shoulder)
Triceps (back of arm)
Latissimus Dorsi (mid back)
Spinae Erectors (lower back)
Gluteus Medius (hip)
Gluteus Maximus (buttocks)
Hamstring (back of leg)
Gastrocnemius (back of calf)

PART LIST—Model No. WEBE2496.1
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28

2
1
1
1
1
1
1
1
1
2
1
2
1
1
2
1
1
2
2
16
2
1
2
1
4
4
4
1

Description

Key No. Qty.

Rack Stabilizer
Left Base
Bench Stabilizer
Bench Frame
Seat Frame
Left Post
Right Post
Left Upright
Right Upright
Tray Support
Seat Carriage
Small Plate
Right Post Bushing
Backrest Bracket
Backrest Frame
Backrest
Seat
Tray
Adjustable-weight Dumbbell
Weight Plate
Left Upright Bushing
Left Post Bushing
56mm Square Cap
Front Leg
50mm x 75mm Endcap
60mm Square Cap
40mm x 25mm Cap
Backrest Knob

29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
*
*
*
*

1
2
1
1
4
1
4
4
2
4
4
4
4
1
18
6
2
5
1
2
2
4
1
1
–
–
–
–

R0607A
Description
Seat Pin
Post Knob
Base Knob
M10 x 180mm Bolt
M5 x 15mm Screw
M10 Nylon Locknut
M6 x 55mm Screw
M8 x 15mm Screw
M8 x 70mm Carriage Bolt
M8 x 90mm Bolt
M8 x 45mm Bolt
M8 x 65mm Carriage Bolt
M8 Washer
M10 x 65mm Carriage Bolt
M8 Nylon Locknut
M6 Washer
M10 Washer
M4 x 15mm Screw
40mm x 20mm Endcap
M6 x 15mm Screw
M6 x 35mm Screw
M8 x 40mm Bolt
Right Base
Right Upright Bushing
User’s Manual
Hex Key
Grease Packet
Exercise Guide

Note: Specifications are subject to change without notice. See the back cover of this manual for information
about ordering replacement parts. *These parts are not illustrated.

EXPLODED DRAWING—Model No. WEBE2496.1

R0607A

16
27
19
20

19
20
50

15
41

41
20

18
10
43

50
44

43
17
21

29
33

33
28

7
43

33
33

30 26

51
43

42
43
25

2
43

25
1

40
25
25

46
37

43
36

26
12

ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of the manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the part(s) (see the PART LIST and the EXPLODED DRAWING near the
end of this manual)

LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing
or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for which
warranty claims are made must be pre-authorized by ICON. If the product is shipped to a service center,
freight charges to and from the service center will be the customer’s responsibility. For in-home service, the
customer will be responsible for a minimal trip charge. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or
repairs not provided by an ICON authorized service center; products used for commercial or rental purposes;
or products used as store display models. No other warranty beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection
with the use or performance of the product or damages with respect to any economic loss, loss of property,
loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other consequential
damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813

Part No. 255667 R0607A

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2007:06:22 16:51:33Z
Creator Tool                    : QuarkXPress(tm) 6.5
Modify Date                     : 2007:06:22 16:53:06-06:00
Metadata Date                   : 2007:06:22 16:53:06-06:00
Producer                        : QuarkXPress(tm) 6.5
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments
Format                          : application/pdf
Document ID                     : uuid:574ea976-2113-11dc-879f-0017f2050332
Instance ID                     : uuid:574eb6d4-2113-11dc-879f-0017f2050332
Page Count                      : 16
Creator                         : QuarkXPress(tm) 6.5

EXIF Metadata provided by EXIF.tools

Weider Club Sidekick Bench Webe2496 Users Manual

Weider-Webe24961-Owner-S-Manual weider-webe24961-owner-s-manual

Navigation menu

Versions of this User Manual:

Views

Navigation