Weider Pro 350Se Bench Webe3889 Users Manual *WEBE38890 159011

Weider-Webe38890-Owner-S-Manual weider-webe38890-owner-s-manual

WEBE38890 to the manual 1a0cf4b3-18b7-43a8-82f0-875c7f77fcbc

2015-05-18

: Weider Weider-Pro-350Se-Bench-Webe3889-Users-Manual-733492 weider-pro-350se-bench-webe3889-users-manual-733492 weider pdf

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

Model No. WEBE38890
Serial No.

USERÕS MANUAL

Write the serial number in the space
above for reference.

G
WA R N I N

may
of this product
¥ Misuse
serious injury.
follow
result in
manual and
¥ Read userÕs
all warnings
instructions
and operating

Serial Number Decal

QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or find that there
are missing or damaged parts,
we will guarantee you complete
satisfaction through direct assistance from our factory.

ING
WA R N

may
product
of this
injury.
¥ Misuse
and follow
in serious
manual
result
userÕs
¥ Read
instructions
all warnings
and operating

TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained technicians on our customer hot line
will provide immediate assistance, free of charge to you.
CUSTOMER HOT LINE:

1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST

CAUTION
Read all precautions and instructions in this manual before
using this equipment. Save this
manual for future reference.

Patent Pending

Visit our website at
www.weiderfitness.com
new products, prizes,
fitness tips, and much more!

Table of Contents
Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Part Identification Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Adjusting the Weight Bench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Exercise Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Part List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Exploded Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

WARNING: Before beginning this or any exercise program, consult your physician. This is especially
important for persons over the age of 35 or persons with pre-existing health problems. Read all
instructions before using. ICON assumes no responsibility for personal injury or property damage
sustained by or through the use of this product.

Important Precautions
WARNING:To reduce the risk of serious injury, read the following important precautions before using
the weight bench.
1. Read all instructions in this manual before
using the weight bench.

seated in the adjustment brackets on the
uprights.

2. Use the weight bench only as described in
this manual.

14. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cooling down.

3. It is the responsibility of the owner to ensure
that all users of the weight bench are adequately informed of all precautions.

15. The weight bench is intended for home use
only. Do not use the weight bench in any
commercial, rental or institutional setting.

4. Use the weight bench only on a level surface.
Cover the floor beneath the weight bench for
protection.

16. When using the dip handles, always place
100 pounds on the leg lever to balance the
weight bench.

5. Inspect and tighten all parts each time you
use the weight bench. Replace any worn
parts immediately.

17. When you are changing weights, always
secure the barbell with the barbell hooks to
prevent it from falling off the bench.

6. Keep children under the age of 12 and pets
away from the weight bench at all times.

18. WARNING DECAL PLACEMENT: The decal
shown below has been placed on the weight
bench. If the decal is missing, or if it is not
legible, please call our Customer Service
Department toll-free at 1-800-999-3756,
Monday through Friday, 6 a.m. until 6 p.m.
Mountain Time, to order a free replacement
decal. Apply the replacement decal in the
location shown.

7. Always be sure there is an equal amount of
weight on each side of the barbell when you
are using it.
8. Do not use a barbell longer than five feet
with the weight bench.
9. When you are using the leg lever, place the
barbell with the same amount of weight on
the weight rests to balance the bench.
10. Always wear athletic shoes for foot protection while exercising.
11. Keep hands and feet away from moving parts.
12. The weight bench is designed to support a
maximum of 360 pounds, including the user,
a weight bar, and weights. Do not place more
than 110 pounds, including a barbell and
weights, on the weight rests; do not place
more than 50 pounds on the leg lever for
normal use (the leg lever can support 100
pounds when stationary ([see precaution 16]).

G
WA R N I N

may
of this product
¥ Misuse
serious injury.
follow
result in
manual and
¥ Read userÕs
all warnings
instructions
and operating

Note: Decal is shown at 75%

13. When using the backrest in an inclined position, make sure that the support tube is fully

Before You Begin
Thank you for selecting the versatile WEIDER¨ PRO
350se weight bench. The WEIDER PRO 350se is
designed to help you develop every major muscle
group of the body. Whether your goal is a shapely figure, dramatic muscle size and strength or a healthier
cardiovascular system, the WEIDER PRO 350se will
help you achieve the specific results you want.

Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time
(excluding holidays). To help us assist you, please note
the product model number and serial number before
calling. The model number is WEBE38890. The serial
number can be found on a decal attached to the WEIDER PRO 350se (see the front cover of this manual).

For your benefit, read this manual carefully before
using the WEIDER PRO 350se. If you have additional
questions, please call our Customer Service

Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.

Weight Rests
Barbell Hook
Dip Handle
Large Threaded Knob
Support Tube
Curl Pad

Foam Pads

Backrest

G
WA R N I N

may
of this product
¥ Misuse
serious injury.
follow
result in
manual and
¥ Read userÕs
all warnings
instructions
and operating

Leg Lever
Uprights

Seat

Weight Tube

Large Weight

Locking Collar

Barbell

Small Weight

Part Identification ChartÐModel No. WEBE38890

R0899A

M10 x 130mm Bolt (9)Ñ1

M10 x 70mm Bolt (26)Ñ5
11mm x 10.5mm Spacer (38)Ð2

M8 x 60mm Bolt (37)Ñ2

M8 Washer (20)Ñ18
M8 x 55mm Bolt (27)Ñ2

M8 Nylon Locknut (33)Ñ7

M8 x 51mm Bolt (39)Ñ1

M8 x 40mm Screw (25)Ñ8

M10 Washer (22)Ñ4
M8 x 16mm Bolt (23)Ñ3

M6 x 16mm Screw (42)Ñ2

Set Screw (43)Ñ2

M10 Nylon Locknut (21)Ñ6

Assembly
Before beginning assembly, carefully read the
following information and instructions:

¥ For help identifying the small parts, use the PART
IDENTIFICATION CHART on page 5.

Make Things Easier for Yourself!
Everything in this manual is designed to ensure
that the assembly of our products can be completed successfully by anyone. However, it is important to recognize that your new equipment is a
sophisticated product with many small parts and
consequently, the assembly process will take
time. Most people find that by setting aside plenty
of time, and by deciding to make the task enjoyable, assembly will go smoothly.

¥ As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.

¥ Assembly requires two people.

¥ One (1) phillips screwdriver

¥ Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.

¥ Lubricant, such as grease or petroleum jelly
plus soapy water.

The following tools (not included) are required
for assembly:
¥ Two (2) adjustable wrenches
¥ One (1) rubber mallet
¥ One (1) standard screwdriver

Assembly will be more convenient if you have the
following tools: A socket set, a set of open-end or
closed-end wrenches or a set of ratchet wrenches.

¥ Tighten all parts as you assemble them, unless
instructed to do otherwise.

1. Before assembling this product, make sure you
have read and understand the information in the
box above.
Orient the Crossbar (3) so the warning decal is facing
up as shown. Attach the Crossbar to the Right
Upright (1) with two M10 x 70mm Bolts (26), a
Support Plate (40), and two M10 Nylon Locknuts (21).
Do not tighten the Nylon Locknuts yet. Make sure
that the Right Upright is turned as shown.

1
1

40
40
21

Attach the Crossbar (3) to the Left Upright (16) in the
same way.

2. Attach the Front Leg (8) to the Frame (2) with three
M8 x 16mm Bolts (23) and three M8 Washers (20).
Do not tighten the Bolts yet.

3
21

23
20
23
8

Decal
21

3. Attach the Frame (2) to the Crossbar (3) with two M8
x 55mm Bolts (27) and two M8 Nylon Locknuts (33).

Tighten the Nylon Locknuts (33) and the Bolts
(23) used in steps 1 to 3.
33
27
2
3
4. Attach a Dip Handle (24) to one of the Weight Rests
(19) with an M8 x 60mm Bolt (37), two M8 Washers
(20), an 11mm x 10.5mm Spacer (38), and an M8
Nylon Locknut (33). Slide a Handgrip (12) onto the
Dip Handle and press a 25.4mm Round Inner Cap
(17) into the Dip Handle.
Attach the other Dip Handle (24) to the other Weight
Rest (19) in the same way.

12
33

24
24

28
20

Attach the Right Barbell Hook (28) to one of the
Weight Rests (19) with an M8 Washer (20) and an
M8 Nylon Locknut (33) as shown. The Barbell Hook
must be oriented as shown. Attach the Left Barbell
Hook (30) to the other Weight Rest (19) in the same
way. Do not tighten the Nylon Locknuts; the
Barbell Hooks must turn easily.
5. Using a rubber mallet, tap a 50mm Square Bushing
(18) onto the upper end of each Upright (1, 16).

19
19
38
20

19
18

Slide the Weight Rest (19) with the Left Barbell Hook
(30) into the Left Upright (16). Align one of the adjustment holes in the Weight Rest with the adjustment
hole in the Left Upright. Tighten the Large Threaded
Knob (32) into the Left Upright.

30
19

Attach the other Weight Rest (19) to the Right Upright
(1) in the same manner.

18
16

1
32
6. Tap a 38mm Square Inner Cap (15) into each end of
the Leg Lever (4).

Tap a 25.4mm Round Inner Cap (17) into each end of
the weight tube.

4
15
17
17
Weight Tube

7. Lubricate an M10 x 70mm Bolt (26). Attach the Leg
Lever (4) to the bracket on the Front Leg (8) with the
Bolt, two M10 Washers (22), and an M10 Nylon
Locknut (21). Do not tighten the Nylon Locknut;
the Leg Lever must be easy to turn.

21
4

22
26

Attach the Leg Lever Lock (36) to the Front Leg (8)
with an M8 x 51mm Bolt (39), an M8 Washer (20),
and an M8 Nylon Locknut (33). Do not tighten the
Nylon Locknut; the Leg Lever Lock must turn easily.

Lubricate
33
20
39
8
36

8. Press two 19mm Round Inner Caps (14) into each
Short Pad Tube (10). Press two 19mm Round Inner
Caps into the Long Pad Tube (35).
Insert the Short Pad Tubes (10) into the holes in the
Leg Lever (4). Slide two Foam Pads (34) onto each
Pad Tube.

34
35

14
14
10

Insert the Long Pad Tube (35) into the holes in the
bracket on the Front Leg (8). Slide a Foam Pad (34)
onto each end of the Long Pad Tube.

14
14

34
4
8

9. Press a 25.4mm Square Inner Cap (13) into the indicated end of each Backrest Tube (5).

13
25

Attach each Backrest Tube (5) to the Backrest (6)
with two M8 x 40mm Screws (25) and two M8
Washers (20). The indicated holes in the Backrest
Tubes must be oriented as shown.

20
5
25

Do not tighten the four Screws yet.

20
6
Holes

10. Press a 25.4mm Square Inner Cap (13) into each
end of the Support Tube (7). Set the Support Tube in
the highest set of adjustment brackets on the
Uprights (1, 16).

13
1

Lubricate the M10 x 130mm Bolt (9). Attach the
Backrest Tubes (5) to the Frame (2) with the Bolt, two
M10 Washers (22), and an M10 Nylon Locknut (21).
Do not overtighten the Nylon Locknut.

22
9

Rest the Backrest (6) on the Support Tube (7).

Lubricate
Tighten the four M8 x 40mm Screws (25) used in
step 9.

6
5

16
22
21

11. Press four 25.4mm Square Inner Caps (13) into the
seat brackets on the Frame (2).

11
11

Attach the Seat (11) to the seat brackets on the
Frame (2) with four M8 x 40mm Bolts (25) and four
M8 Washers (20).

2
20

13
25
12. Attach the Curl Pad (41) to the Curl Post (29) with
two M6 x 16mm Screws (42).

12
42

Insert the Curl Post (29) into the Front Leg (8). Align
one of the adjustment holes in the Curl Post with the
adjustment hole in the Front Leg. Tighten the Small
Threaded Knob (31) into the Front Leg.

41
29
8

13. Make sure that all parts are properly tightened
before using the weight bench. The use of all
remaining parts will be explained in Adjusting the
Weight Bench below.

Adjusting the Weight Bench
This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 11 for important information on how to get the most benefit from your exercise program. Also, refer to the accompanying
exercise poster to see the correct form for each exercise.
Inspect and tighten all parts each time you use the weight bench. Replace any worn parts immediately. The
weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
ADJUSTING THE BACKREST
7

The Backrest (6) can be used in a level position, an
inclined position, or a declined position. To use the
Backrest in a level position, first lift the Backrest. Insert
the Support Tube (7) into the lowest set of adjustment
brackets on the Uprights (1, 16). Lay the Backrest Tubes
(5) on the Support Tube.
To use the Backrest (6) in an inclined position, first lift the
Backrest. Insert the Support Tube (7) into one of the two
upper sets of adjustment brackets on the Uprights (1, 16).
Lay the Backrest Tubes (5) on the Support Tube.
To use the Backrest (6) in a declined position, lift the
Backrest and remove the Support Tube. Lay the Backrest
Tubes on the Crossbar (3).

5
1

ADJUSTING THE WEIGHT RESTS/DIP HANDLES
To adjust the Weight Rests (19), remove the Large
Threaded Knobs (32) from the Uprights (1, 16). Move the
Weight Rests to the desired height. Replace the Large
Threaded Knobs.

WARNING: The weight rests must be set at the
same height.

WARNING: When using the dip handles, place 100
pounds on the leg lever to balance the weight
bench.

19
32

ATTACHING WEIGHTS TO THE LEG LEVER
4

To use the Leg Lever (4), slide the desired weights onto
the weight tube.
WARNING: Do not place more than 50 pounds on
the Leg Lever for normal use.
WARNING: When using the dip handles, always
place 100 pounds on the leg lever to balance the
weight bench. Do not place more than 100 pounds
on the leg lever.

Weight Tube

LOCKING THE LEG LEVER
Some exercises, such as sit-ups, can be performed more
comfortably with the Leg Lever (4) locked.
To lock the Leg Lever (4), turn the Leg Lever Lock (36)
until it engages the Short Pad Tube (10).
36

4
10
ATTACHING THE CURL POST
For some exercises, the Curl Post (29) must be attached
to the weight bench.
Insert the Curl Post (29) into the indicated hole in the
Front Leg (8). Align the holes in the Front Leg and the
Curl Post. Secure the Curl Post with the Small Threaded
Knob (31). Make sure that you fully tighten the
Threaded Knob.
When the Curl Post (29) is not in use, store it away from
the weight bench so that it does not interfere with your
exercise.

31
8

USING THE BARBELL HOOKS
19
To change weights while the Barbell (44) is on the Weight
Rests (19), secure the Barbell with the Barbell Hooks (28,
30). To do this, flip the Barbell Hooks over the Barbell.
28

This will reduce the possibility of the Barbell tipping while
you are changing weights.

ATTACHING WEIGHTS TO THE BARBELL
Slide the same number of Large and Small Weights (48,
49) onto each end of the Barbell (44). Slide a Collar (47)
onto each end of the Barbell. Slide the Collars and the
Weights against the Barbell Sleeve (46). Firmly tighten
the Set Screws (43). Make sure that the Weights cannot
move back and forth on the Barbell.

44
46

48
49

Exercise Guidelines
erate amount of weight and increase the number of
repetitions in each set. Complete as many sets of 15
to 20 repetitions as possible without discomfort. Rest
for 1 minute after each set. Work your muscles by
completing more sets rather than by using high
amounts of weight.

THE FOUR BASIC TYPES OF WORKOUTS
Muscle Building
The only way to increase the size and strength of
your muscles is to push them close to their maximum
capacity. When you progressively increase the intensity of your exercise, your muscles will continually
adapt and grow. You can tailor the individual exercise
to the proper intensity level in two ways:
¥ by changing the amount of weight used
¥ by changing the number of repetitions or sets performed (A ÒrepetitionÓ is one complete cycle of an
exercise, such as one sit-up. A ÒsetÓ is a series of
repetitions).

Weight Loss
To lose weight, use a low amount of weight and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
Cross Training
Many people desire a complete and well-balanced fitness program, and cross training is a very efficient
way to accomplish this. One example of a balanced
program is:
¥ Plan weight training workouts on Monday,
Wednesday and Friday.
¥ Plan 20 to 30 minutes of aerobic exercise, such as
cycling, running or swimming on Tuesday and
Thursday.
¥ Rest from both weight training and aerobic exercise
for at least one full day each week to give your body
time to regenerate.

The proper amount of weight for each exercise obviously depends upon the individual user. You must
gauge your limits and select the amount of weight that
is right for you. Begin with 3 sets of 8 repetitions for
each exercise you perform. Rest for 3 minutes after
each set. When you can complete 3 sets of 12 repetitions without difficulty, increase the amount of weight.
Toning
You can tone your muscles by pushing them to a
moderate percentage of their capacity. Select a mod-

nying this manual, you will find photographs showing
the correct form for several exercises. A description of
each exercise is also provided, along with a list of the
muscles affected. Refer to the muscle chart on page
14 to find the locations of the muscles.

The combination of weight training and aerobic exercise will reshape and strengthen your body plus
develop your heart and lungs.
PERSONALIZING YOUR EXERCISE PROGRAM

The repetitions in each set should be performed
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
during the return stroke. Never hold your breath!

Specifying the exact length of time for each workout,
as well as the number of repetitions or sets for each
exercise, is a highly individual matter. It is very important to avoid overdoing it during the first few months
of your exercise program. You should progress at
your own pace and be sensitive to your bodyÕs signals. If you experience pain or dizziness at any time
while exercising, stop immediately and begin cooling
down. Find out what is wrong before continuing.
Remember that adequate rest and a proper diet are
important factors in any exercise program.

You should rest for a short period of time after each
set. The ideal resting periods are:
¥ Rest three minutes after each set for a muscle building workout
¥ Rest one minute after each set for a toning workout
¥ Rest 30 seconds after each set for a weight loss
workout
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.

WARMING UP
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
your body for more strenuous exercise by increasing
circulation, raising your body temperature and delivering more oxygen to your muscles.

COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is very effective for increasing flexibility.

WORKING OUT
Each workout should include 6 to 10 different exercises. Select exercises for every major muscle group
with emphasis on the areas that you want to develop
the most. To give balance and variety to your workouts, vary the exercises from session to session.

STAYING MOTIVATED

Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.

For motivation, keep a record of each workout. The
chart on page 13 of this manual can be photocopied
and used to schedule and record your workouts. List
the date, the exercises performed, the weight plus the
numbers of sets and repetitions completed. Record
your weight and key body measurements at the end
of every month.

EXERCISE FORM
You will gain the greatest benefits from exercising by
maintaining proper form. This requires moving
through the full range of motion for each exercise and
moving only the appropriate parts of the body.
Exercising in an uncontrolled manner will leave you
feeling exhausted. On the exercise poster accompa-

Remember, the key to achieving the greatest results
is to make exercise a regular and enjoyable part of
your everyday life.

EXERCISE

MONDAY

WEIGHT

SETS

REPS

WEIGHT

SETS

REPS

WEIGHT

SETS

REPS

Date:

AEROBIC EXERCISE

TUESDAY
Date:

WEDNESDAY

EXERCISE

Date:

THURSDAY

AEROBIC EXERCISE

Date:

/
EXERCISE

FRIDAY
Date:

Make photocopies of this page for scheduling and recording your workouts.

MUSCLE CHART
A. Sternomastoid (neck)
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
L. Rectus Abdominus (stomach)
M. Adductor (inner thigh)
N. Trapezius (upper back)
O. Rhomboideus (upper back)
P. Deltoid (shoulder)
Q. Triceps (back of arm)
R. Latissimus Dorsi (mid back)
S. Spinae Erectors (lower back)
T. Gluteus Medius (hip)
U. Gluteus Maximus (buttocks)
V. Hamstring (back of leg)
W. Gastrocnemius (back of calf)

N
A

S
F

Part ListÐModel No. WEBE38890
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26

1
1
1
1
2
1
1
1
1
2
1
2
8
6
2
1
4
2
2
18
6
4
3
2
8
5

Description

Key No. Qty.

R0899A

Description

27
2
M8 x 55mm Bolt
28
1
Right Barbell Hook
29
1
Curl Post
30
1
Left Barbell Hook
31
1
Small Threaded Knob
32
2
Large Threaded Knob
33
7
M8 Nylon Locknut
34
6
Foam Pad
35
1
Long Pad Tube
36
1
Leg Lever Lock
37
2
M8 x 60mm Bolt
38
2
11mm x 10.5mm Spacer
39
1
M8 x 51mm Bolt
40
2
Support Plate
41
1
Curl Pad
42
2
M6 x 16mm Screw
43
2
Set Screw
44
1
Barbell
45
2
25.4mm Round Inner Cap
46
1
Barbell Sleeve
47
2
Weight Collar
48
4
15-lb. Weight
49
2
10-lb. Weight
#
1
UserÕs Manual
#
1
Exercise Poster
# indicates a non-illustrated part

Right Upright
Frame
Crossbar
Leg Lever
Backrest Tube
Backrest
Support Tube
Front Leg
M10 x 130mm Bolt
Short Pad Tube
Seat
Handgrip
25.4mm Square Inner Cap
19mm Round Inner Cap
38mm Square Inner Cap
Left Upright
25.4mm Round Inner Cap
50mm Square Bushing
Weight Rest
M8 Washer
M10 Nylon Locknut
M10 Washer
M8 x 16mm Bolt
Dip Handle
M8 x 40mm Screw
M10 x 70mm Bolt

Exploded DrawingÐModel No. WEBE38890

R0899A

41
6
13

33
20

19
13
11

33
22

32
13

27
21

33
12

13
2
13
20
34

20
25 23
10

14
21

40
21

14
8
22 26

34
33

20 23

34
46

20
20

20
48
49

47
45

10
34

36
14

15 34

39
43

Specifications are subject to change without notice. See the back cover of the userÕs manual for information
about ordering replacement parts.

Ordering Replacement Parts
To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give the following information when calling:
1. The MODEL NUMBER of the product (WEBE38890)
2. The NAME of the product (WEIDER¨ PRO 350se weight bench)
3. The SERIAL NUMBER of the product (see the front cover of this manual)
4. The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST on page 14 and the
EXPLODED DRAWING on page 15 of this manual).

Limited Warranty
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing
or repairing, at ICON's option, the product at one of its authorized service centers. All products for which warranty claim is made must be received by ICON at one of its authorized service centers with all freight and other
transportation charges prepaid, accompanied by sufficient proof of purchase. All returns must be pre-authorized by ICON. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON
authorized service center, products used for commercial or rental purposes, or products used as store display
models. No other warranty beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection
with the use or performance of the product or damages with respect to any economic loss, loss of property,
loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813

WEIDER is a registered trademark of ICON Health & Fitness, Inc.
Part No. 159011 R0899A

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 16
Create Date                     : 2000:01:12 13:40:20
Producer                        : Acrobat Distiller 3.02 for Power Macintosh
Author                          : Steve Slade
Creator                         : QuarkXPressª: PSPrinter 8.3.1
Title                           : *WEBE38890-159011

EXIF Metadata provided by EXIF.tools

Weider Pro 350Se Bench Webe3889 Users Manual *WEBE38890 159011

Weider-Webe38890-Owner-S-Manual weider-webe38890-owner-s-manual

WEBE38890 to the manual 1a0cf4b3-18b7-43a8-82f0-875c7f77fcbc

Navigation menu

Versions of this User Manual:

Views

Navigation