Weifang Goertek Electronics TITANBTL 3D Eyewear User Manual BTL OI 20111207a
Weifang Goertek Electronics Co.,Ltd 3D Eyewear BTL OI 20111207a
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1604421 |
| Application ID | rtGXWk+Y7re1kk2yTaGpwA== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 47.3kB (591312 bits) |
| Date Submitted | 2011-12-16 00:00:00 |
| Date Available | 2011-12-21 00:00:00 |
| Creation Date | 2011-12-08 10:20:15 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2011-12-08 10:49:00 |
| Document Title | BTL_OI_20111207a.pdf |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | E037688 |
Operating Instructions 3D Eyewear Model No. TY-ER3D4MA This product cannot be used as sunglasses. ENGLISH çšéŤä¸ć 7,Í1*9,Í7 ćĽćŹčŞ TQZJ405 Viewing 3D images You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear (supplied). âStandard accessoriesâ (p. 6) This TV supports [Frame Sequential] 1, [Side by Side] 2 and [Top and Bottom] 3 3D formats. 1: The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately played back. 2, 3: Other available 3D formats Ć How to use the 3D Eyewear (p. 31) Ć How to view the 3D images (p. 34) Warning Small Parts Ć 3D Eyewear contains small parts (battery, etc.) and must be kept out of reach of small children to avoid accidental ingestion. Disassembly Ć Do not disassemble or modify the 3D Eyewear. Lithium Battery Ć Batteries must not be exposed to excessive heat such as sunshine, fire or the like. 3D Eyewear Ć Do not drop, exert pressure on, or step on the 3D Eyewear. Ć Be careful of the tips of the frame when putting on the 3D Eyewear. Ć Always keep the 3D Eyewear in a cool, dry place. Ć Be careful not to trap a finger in the hinge section of the 3D Eyewear. Viewing 3D images Caution To enjoy 3D images safely and comfortably, please read these instructions fully. 29 Viewing 3D Content Ć Do not use the 3D Eyewear if you have a history of over-sensitivity to light, heart problems, or have any other existing medical conditions. Ć Please stop using the 3D Eyewear immediately, if you feel tired, are not feeling well or experience any other uncomfortable sensation. When you set the effect by using [3D Adjustment], take into account that the vision of 3D images varies among different individuals. Ć Take an appropriate break after viewing a 3D movie. Ć Take a break of between 30 - 60 minutes after viewing 3D content on interactive devices such as 3D games or computers. Ć Be careful not to strike the TV screen or other people unintentionally. When using the 3D Eyewear the distance between the user and screen can be misjudged. Ć The 3D Eyewear must only be worn when viewing 3D content. Ć If you do not look toward the TV screen for a while when viewing 3D images, the 3D Eyewear may be turned off automatically. Ć Use the 3D Eyewear where there is no interference from other devices with Bluetooth signal. Ć If you suffer from any eyesight problems (short / far-sighted, astigmatism, eyesight differences in left and right), please ensure to correct your vision before using the 3D Eyewear. Ć Stop using the 3D Eyewear if you can clearly see double images when viewing 3D content. Ć Do not use the 3D Eyewear at a distance less than the recommended distance. The recommended viewing distance is at least 3 times of the image height. TH-P50ST50A: 1.9 m or more When the top and bottom area of the screen is blackened, such as movies, view the screen at a distance at least 3 times of the height of the actual image. (That makes the distance closer than above recommended figure.) Viewing 3D images 3D Eyewear Use Ć Pay special attention when children are using the 3D Eyewear. 3D Eyewear should not be used by children younger than about 5 - 6 years old, as a guideline. All children must be fully supervised by parents or guardians who must ensure their safety and health throughout the using 3D Eyewear. Ć Before using the 3D Eyewear, ensure no breakable objects surrounding the user to avoid any accidental damage or injury. Ć Remove the 3D Eyewear before moving around to avoid falling or accidental injury. Ć Use the 3D Eyewear only for the intended purpose and nothing else. Ć Do not use 3D Eyewear in the condition of high temperature. Ć Do not use if the 3D Eyewear is physically damaged. Ć Do not use devices (such as mobile phones or personal transceivers) that emit strong electromagnetic waves near the 3D Eyewear as this may cause the 3D Eyewear to malfunction. Ć Stop using the 3D Eyewear immediately if a malfunction or fault occurs. Ć Stop using the 3D Eyewear immediately if you experience any redness, pain, or skin irritation around the nose or temples. Ć In rare cases, the materials used in the 3D Eyewear may cause an allergic reaction. Lithium Battery Ć Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 30 Part names and functions Ć 3D Eyewear can be worn over vision correction glasses. Power switch Slide the tab to the âONâ / âOFFâ position to switch the power on/off. Each time slide the tab to the âMODEâ position to change the mode between 3D and 2D (view a 3D image in 2D). Registration (p. 32) Indicator lamp Lights or flashes during use to show the status. Pull Battery cover Ć When using for the first time, remove the insulating sheet. Pull the insulating sheet. Ć To replace the battery âReplacing the batteryâ (p. 33) Viewing 3D images Insulating sheet Ĺś Indicator lamp status Indicator lamp Status Lights red for 2 seconds when turned on Sufficient battery level Flashes 5 times when turned on Low battery level Flashes red and green alternately Under pairing Flashes green once every 2 seconds Under reconnecting to the TV Lights green for 3 seconds Pairing or reconnecting is successfully completed. Flashes red 3 times Automatically power off (Pairing or connecting fails or connection is lost) Flashes red once every 2 seconds when in use 3D mode is selected Flashes red twice every 4 seconds when in use 2D mode is selected Storing and cleaning the 3D Eyewear Ć Use the supplied 3D Eyewear case to store the 3D Eyewear. Ć Avoid storing the 3D Eyewear in hot or highly humid locations. Ć Use a clean, soft and dry cloth to wipe the 3D Eyewear. Otherwise, dirt or dust may scratch the eyewear. Ć Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off. Ć Do not submerge the 3D Eyewear in liquid such as water when cleaning. Ć As the liquid crystal shutters (lens) are fragile and easily broken, be very careful when cleaning them. 31 Registration First registration Perform the first registration when the 3D Eyewear is used for the first time. 1 Turn on the TV. 2 Slide the power switch from âOFFâ to âONâ. The 3D Eyewear will power on and start registration. Place the 3D Eyewear within 50 cm from the TV while registration in progress. 3 The green LED lights on the 3D Eyewear for 3 seconds when the registration is successfully completed. After first registration, the 3D Eyewear will reconnect with TV automatically when 3D Eyewear is powered on near the TV in 3D mode. Registration again When connection with registered TV fails, or when using with another TV,re-register the 3D Eyewear. 1 Turn on the TV. 2 Within 50 cm from the TV, hold the power switch on the âMODEâ position for more than 2 seconds. The registration will start. 3 The green LED lights for 3 seconds when the pairing is successfully completed. Note Viewing 3D images Ć If the registration failed, the 3D Eyewear will power off. In this case, power off the TV and perform from step 1. Ć Release the power switch when Registration again starts. Viewing range for the 3D Eyewear Approx. 3.2 m Note Ć You cannot view the 3D images with the 3D Eyewear too far from the TV, because of the difficulty of receiving radio waves from the TV. Ć The range may be shortened depending on the obstacles between the TV and the 3D Eyewear, or the surrounding environment. Ć There are differences in the viewing range of the 3D Eyewear among individuals. Ć The 3D Eyewear may not operate correctly at the outside of the viewing range. 32 Replacing the battery When the battery is running low, the indicator lamp flashes 5 times on turning the 3D Eyewear on. In this case, early battery replacement is recommended. Ć Dispose of the old batteries as non-burnable rubbish, or in line with the waste disposal regulations in your local area. 1 Loosen the screw and remove the cover using with a precision Phillips (No.0, plus + ) screwdriver. Ć The screw is not removed from the cover. 2 Replace the battery Ć If difficulty, remove it with the tip of the driver. Viewing 3D images Ć Use the specified type of battery (coin-shaped lithium battery CR2032). Ć Note the correct polarity (+ or -). 3 Replace and fasten the cover. Ć Push the cover firmly until it clicks Ć Tighten the screw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 5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD  ,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQGUHFHLYHU  &RQVXOWWKH3DQDVRQLF6HUYLFH&HQWHURUDQH[SHULHQFHGUDGLR 79WHFKQLFLDQIRUKHOS (1*/,6+ )&&&DXWLRQ 7RDVVXUHFRQWLQXHGFRPSOLDQFHIROORZWKHDWWDFKHG LQVWDOODWLRQLQVWUXFWLRQVDQGXVHRQO\VKLHOGHGLQWHUIDFH FDEOHZLWKIHUULWHFRUHZKHQFRQQHFWLQJWRFRPSXWHURU SHULSKHUDOGHYLFHV$Q\FKDQJHVRUPRGLÂżFDWLRQVQRW H[SUHVVO\DSSURYHGE\3DQDVRQLF&RUSRI1RUWK$PHULFD FRXOGYRLGWKHXVHUÂś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his device Thi d i complies li with ith IIndustry d t C Canada d lilicence-exemptt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under portable exposure conditions. (antennas are less than 20 cm of a person's person s body). body) This device has been certified for use in Canada. Status of the listing in the Industry Canadaâs REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng Additional Canadian information on RF exposure also can be found at the following web address: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html Cet appareil numĂŠrique de est conforme aux normes canadiennes licence-exempt RSS standard(s) Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfĂŠrence et (2) cet appareil doit accepter toute interfĂŠrence, notamment les interfĂŠ rences qui peuvent affecter son fonctionnement fonctionnement. Informations concernant l'exposition aux frĂŠquences radio (RF) La puissance de sortie ĂŠmise par lâappareil de sans fil Dell est infĂŠ rieure Ă la limite d'exposition aux frĂŠquences radio d'Industry Canada (IC). Utilisez lâappareil de sans fil Dell de façon Ă minimiser les contacts humains lors du fonctionnement normal. Ce pĂŠriphĂŠrique a ĂŠgalement ĂŠtĂŠ ĂŠvaluĂŠ et dĂŠmontrĂŠ conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition Ă des appareils portables. (les antennes sont moins de 20 cm du corps d'une personne). Ce pĂŠriphĂŠrique est homologuĂŠ pour l'utilisation au Canada. Pour consulter l'entrĂŠe correspondant Ă lâappareil dans la liste d'ĂŠ quipement radio (REL - Radio Equipment List) d'Industry Canada rendez-vous sur: http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng Pour des informations supplĂŠmentaires concernant l'exposition aux RF au Canada rendez-vous sur : http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html NCCSTATEMENT âŤ×âŹáŹŐžŕŁâŚˇä´ŤâäŤá´áä´Ťâă⨜äâ ă ༹ҟᝠăŕśťáżä˝ä šŕ¨¸ášŹŃťŐžŕŁâŚˇá´äšŤä´ŤâËäśăäĄŕ¨ËâŤŢâŹŕ¨¨Çŕśă˛áĄÖŻâăľŕľˇĐ˝á፾ă äşá´¤äšŤâŚˇÇŕŁŕ˝ŕŁâŚˇáĄäşá´¤ŕ§ää¸Ńťâ˘Šá৺ŕŁăÇ ă ༹ŕ´áť ŐžŕŁâŚˇá´äšŤä´ŤâŃťÖŻâĐ˝ááĄä¸ŻäźăĄášâŤŢâŹŕ§şá˘áŹŽŕ¨¸â äŘËăⲏ⨎ᴚá˘áŹŽâ¨Žäáą˛Ë ášăťŕŚŁâŤËâÚâŹŃáŠŕŽ´ă Łâá˘áŹŽáą˛áŻŠáăŹăźÖŻâÇ ŕĄ˝ä¸ľŕ¨¸â äŘËᤡâŤ×âŹä´ŤŘâ ăžżáÖážŃťâ ăä´ŤäŘÇ ŐžŕŁâŚˇá´äšŤä´Ťâ丸á˝ŕ¨ŕ¨¸â äŘáĄáážÇăá¨ŕ§şä⹲âä´ŤâäŤá´áä´ŤâäâŤŰâŹŃť á˘áŹŽÇ IC ST DDD As the battery is specially for this product, do not use it for any other device. Do not charge the battery. Do not pierce the battery with a nail, subject it to an impact, or dismantle or modify it. Do not let the wires touch any other metal or each other. Do not carry or store the battery with a necklace, hair pin, or the like. Do not charge, use, or leave the battery in a hot location Doing so may cause the battery to generate heat, ignite, or rupture. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2011:12:08 10:20:15+08:00 Modify Date : 2011:12:08 10:49+08:00 Metadata Date : 2011:12:08 10:49+08:00 Creator Tool : PScript5.dll Version 5.2 Document ID : uuid:B30A051E4321E111A6A5B7D95963A933 Instance ID : uuid:31c60497-9ecd-4c3f-97c3-32010c6b0783 Derived From Instance ID : uuid:e7e4bd50-24ff-4c3c-a506-f2bca97a97fd Derived From Document ID : uuid:c1e4b8fe-a680-4303-86f6-215da17d3623 Format : application/pdf Creator : E037688 Title : BTL_OI_20111207a.pdf Page Count : 10 Author : E037688EXIF Metadata provided by EXIF.tools