Westel Wireless Systems CI00063 UHF BASE STATION TRANSCEIVER User Manual MANUAL APPENDIX B
Westel Wireless Systems Pty Ltd UHF BASE STATION TRANSCEIVER MANUAL APPENDIX B
Contents
MANUAL APPENDIX B
Installation and Operators Handbook Appendix B APPENDIX B MODULE ERROR CODES AND RECOMMENDED ACTIONS Table B-1: Error Codes E00 – E99 : User Serviceable Failures/Advisories Transceiver Module Controller Module E00 E01 Reserved Reserved Internal 10MHz failure E02 – E03 E04 E05 Reserved Channel Programming Error or Empty Channel Table PA Comms Failure Reserved DC Revert Active PA Over Temperature Alarm PA High VSWR Alarm Remote Diagnostics Active in Test Mode Reserved DSP boot failure Reserved Not Used E06 E07 E08 E09 E10 – E22 E23 E24 E25 E26–E99 AMX–MA–00659 Issue 0.02 (USA) Reserved GPIO Xilinx boot failure DSP boot failure Reserved Recommended Action Either replace Controller Module or use external 10 MHz oscillator Check AC Power Supply Check channel programming using Transceiver Module Programmer Check PA inserted correctly and power applied from PSU. If PSU fault light is on, or PSU power light is off, then replace PSU module. Otherwise replace PA module. Check fans operating correctly. Check antenna connections. An advisory, not an error condition Replace Controller Module Replace Module B-1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Producer : Acrobat Distiller 4.05 for Windows Creator : Microsoft Word 9.0 Modify Date : 2001:02:27 13:21:52+12:00 Author : Steve Tucker Title : APPENDIX B MODULE ERROR CODES AND RECOMMENDED ACTIONS Create Date : 2001:02:27 13:21:10 Page Count : 1 Page Mode : UseNoneEXIF Metadata provided by EXIF.tools