Westell BDA510-P9 In Building Amplifier User Manual

Westell, Inc. In Building Amplifier Manual

a href="https://usermanual.wiki/Westell" itemprop="url"> Westell >

Manual

PRODUCT MANUAL WESTELL.COM ©Westell Technologies. 960-1032-MNL rC Bi-directional Amplifiers 510 and 610 Series
Bi-directional Amplifiers 510 and 610 Series WESTELL.COM © 2015 Westell Technologies 30 September 2015 Doc. No. 960-1032-MNL rC 1.877.844.4274 Page 2 of 28 Disclaimer All information and statements contained herein are accurate to the best of the knowledge of Westell, but Westell makes no warranty with respect thereto, including without limitation any results that may be obtained from the products described herein or the infringement by such products of any proprietary rights of any persons. Use or application of such information or statements is at the users’ sole risk, without any liability on the part of Westell. Nothing herein shall be construed as license or recommendation for use, which infringes upon any proprietary rights of any person. Product material and specifications are subject to change without notice. Westell’s standard terms of sale and the specific terms of any particular sale apply. WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You must have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for Each continuing violation.” WARNING! Changes and Modifications not expressly approved by Westell can void your authority to operate this equipment under Federal Communications Commission’s rules. WARNING! The Manufacturer's rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device. . STATE DEPARTMENT EXPORT AUTHORIZATION REQUIRED FOR DISTRIBUTION TO FOREIGN DESTINATIONS OR FOREIGN PERSONS This document contains Technical Data controlled under the US International Traffic in Arms Regulations (ITAR), 22 CFR 120-130, and may not be exported or transferred to any Foreign Person, foreign country or foreign entity, by any means, without prior written approval from the U.S. Department of State, Directorate of Defense Trade Controls (“DDTC”) and DRS ICAS, LLC.
Download:
Mirror Download [FCC.gov]
Document ID3257212
Application IDl/raGRQ9CEbY/pJhtnfQ0Q==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize70.12kB (876520 bits)
Date Submitted2017-01-12 00:00:00
Date Available2017-01-12 00:00:00
Creation Date2017-01-11 16:59:15
Producing SoftwareGPL Ghostscript 9.06
Document Lastmod2017-01-11 16:59:15
Document TitleMicrosoft Word - 960-1032-MNL rC Bi-directional Amplifiers_510-610_r3
Document CreatorPScript5.dll Version 5.2.2
Document Author: POUIM
FCC ID Filing: NVRBDA510-P9

Navigation menu